The present work aimed to direct amino acid (AA) sensing by quantum dots (QD) and development of an analytical method for potential fast clinical tests. Notably, AA with a positive charge or neutral polar chains, namely L-histidine (His) and L-threonine (Thr), responded to glutathione-coated CdTe (GSH-CdTe) (ΔF ≤ 90%, variation of fluorescence intensity). However, in ammoniacal buffer (0.25 mol L-1) at pH 8.0, 2.2 nm GSH-CdTe responded only to His. Static quenching with complex association constant (Ksv) varying from 2.81 to 0.94 (10 L mol-1) as well as van der Waals forces and/or hydrogen bonding were predicted for His-QD quenching mechanism and binding type. Additionally, thermodynamic parameters as ΔH = -76.5 kJ mol-1 (enthalpy), ΔS = -227.4 J K-1 mol-1 (entropy) and ΔG from -9.8 until -6.4 kJ mol-1 (Gibbs free energy) at 20 to 35 °C were estimated by van’t Hoff equation. Under optimal conditions, the developed method presented a linear range from 0.42 to 35 mmol L-1 (with correlation coefficient (r) of 0.9970, n = 7), good precision (relative standard deviations (RSD) < 2.5% for 2.5 and 20 mmol L-1; n = 6) and limit of detection 1.6 × 10-4 mol L-1 (0.025 mg mL-1). Recovery tests were performed on artificial urine and human urine samples with recoveries ranging from 78.7 to 127.6%.

The development of a method based on extraction induced by emulsion breaking (EIEB) aiming copper determination in gasohol using graphite furnace atomic absorption spectrometry (GF AAS) is reported. Emulsification of the gasohol samples was carried out using nitric acid solution, (1,1,3,3-tetramethylbutyl)phenyl-polyethylene glycol surfactant (Triton X-114), and ultrasound energy. The variables related to the extraction efficiency were optimized by multivariate approaches (two-level factorial fractional design and Doehlert design). The best results were obtained when the emulsion was formed with 5.0 mL of the sample, 0.200 mL of 2.4 mol L-1 HNO3, 0.100 mL of 10% Triton X-114 and 10 min of sonication. A fast and efficient emulsion breaking was performed at 90 ºC. A volume of 6.65 mL of the copper-rich hydroalcoholic phase was extracted, separated from the organic phase and analyzed. Under these conditions, the following analytical characteristics were obtained: 0.61 and 2.0 µg L-1 for limits of detection and quantification, respectively; precision (percentage of relative standard deviation, 10 µg L-1) of 2.8%; and analytical sensitivity of 0.011 L µg -1. Accuracy was assessed by spike tests, and values in the range of 95-110% were achieved. The method was applied in the determination of copper in Brazilian gasoline samples (gasohol with 27% ethanol).

In this study, antimicrobial activity of extracts and lupenone from A. inundata (Fabaceae, Mimosoideae), were tested. In addition, the multi-element composition of the leaves, bark and stems (heartwood) of A. inundata was evaluated using inductively coupled plasma optical emission spectrometry (ICP OES). Lupenone was isolated in the petroleum ether extract of leaves, for the first time. Biological assays were conducted to evaluate the antimicrobial (antibacterial, antifungal and antiparasitic) of extracts, their fractions and lupenone. The results showed antimicrobial and antileishmanial activity of these compounds, which may be useful for obtaining a chemical composition and biological activity database on Albizia species. For multi-element composition, we found the mean concentrations (minimum-maximum) of Al, Ca, Cr, Cu, Fe, K, Mg, Mn, Ni, P, V and Zn in the samples ranged between 0.06 and 265.41 µg g-1. Concentration ranges of Cu, Fe, Mn and Zn are large, which makes these samples as additional sources of these macronutrients.

Levels of As, Cd, Cr, Cu, Li, Mn, Mo, Ni, Pb, Sb and Se in muscle, gill, stomach, liver, kidney and gonad tissues of six different fish species (Caranx latus, Bagre marinus, Archosargus rhomboidalis, Lutjanus synagris, Scomberomorus cavalla and Sphyraena guachancho) from the Todos os Santos Bay (Bahia State, Brazil) were evaluated. The elements were determined by inductively coupled plasma mass spectrometry (ICP-MS) after wet digestion using reflux system with a cold finger. The detected concentration ranges were as follows (mg kg-1 dry weight): < 0.49-27.31 for As, < 0.013-1.12 for Cd, 0.38-6.05 for Cr, 0.17-28.12 for Cu, < 0.092-1.19 for Li, 0.16-55.9 for Mn, < 0.034-1.24 for Mo, < 0.067-15.57 for Ni, < 0.013-0.60 for Pb, < 0.144 for Sb and 0.57-14.6 for Se. Highest concentrations of trace elements were observed in kidney, liver and gill tissues.

Neste trabalho descreve-se a composição mineral das folhas de Lippia alba (Mill.) que são utilizadas na preparação de chá utilizado na medicina popular. Assim, as folhas da espécie foram coletadas em cidades brasileiras e as amostras foram digeridas usando ácido nítrico e peróxido de hidrogênio em placa aquecedora e, em seguida, foram analisadas empregando espectrometria de emissão óptica com plasma acoplado indutivamente (ICP OES). Para avaliação da exatidão foi utilizado o material de referência certificado, folhas de maçã - NIST SRM 1515. Os resultados demonstraram que cálcio, magnésio e fósforo têm conteúdo médio de 1.950, 2.856 e 2.335 mg 100 g-1 e variações de concentrações de 767-3.887, 314-8.591 e 247-9.214 mg 100 g-1, respectivamente. Os micro-elementos, bário, zinco, cobre, ferro, manganês e níquel têm conteúdos médios de 2,16; 2,95; 0,94; 11,2; 4,25 e 0,09 mg 100 g-1, para variações de concentrações de 0,66-7,1; 1,35-6,3; 0,33-1,7; 0,98-34; 0.82-7,4 e 0,03-0,15 mg 100 g-1, respectivamente. Os dados foram também avaliados usando análise de componentes principais (PCA).

Leaves of Lippia alba (Mill.) N.E. Brown are used for the preparation of tea infusions that are employed in folk medicine. In this paper, the mineral composition of Lippia alba (Mill.) leaves, collected from different Brazilian cities, was evaluated. The samples were digested using nitric acid and hydrogen peroxide on a hot plate and were analyzed using inductively coupled plasma optical emission spectrometry (ICP OES). SRM 1515 apple leaves from NIST were used for checking accuracy. The results demonstrated that calcium, magnesium and phosphorus have average contents of 1,950, 2,856 and 2,335 mg 100 g-1, respectively, and concentration ranges of 767-3,887, 314-8,591 and 247-9,214 mg 100 g-1, respectively. The microelements barium, zinc, copper, iron, manganese and nickel have average contents of 2.16, 2.95, 0.94, 11.2, 4.25 and 0.09 mg 100 g-1, respectively, and concentration ranges of 0.66-7.1, 1.35-6.3, 0.33-1.7, 0.98-34, 0.82-7.4 and 0.03-0.15 mg 100 g−1, respectively. The data were also evaluated using principal component analysis (PCA).

Contextualized overview of the Biodiesel Production Chain, from the lab bench to the industry, with critical evaluation of state-of-art and technological development through scientific articles and patents, focusing on feedstock, reaction/production, first and second generation processes, specification and quality, transport, storage, co-products (effluents and sub-products), and emissions. Challenges are identified and solutions are proposed based on the Brazilian feedstock, edaphoclimatic conditions, process monitoring in remote regions, state policy, and environment preservation, among others. Forecasts are made based on the technology assessment, identifying future trends and opportunities for R&D&I.

Neste trabalho, foi avaliada a composição mineral da farinha de trigo consumida no Brasil. Na etapa de amostragem foram coletadas 54 amostras em 15 cidades, incluindo as principais cidades brasileiras como: São Paulo, Rio de Janeiro, Salvador, Porto Alegre, Recife e outras. Os elementos determinados foram: cálcio, cobre, magnésio, manganês, ferro, fósforo, potássio e zinco. As amostras foram digeridas usando acido nítrico e peróxido de hidrogênio em sistema aberto. A técnica analítica empregada foi a espectrometria de emissão óptica com plasma indutivamente acoplado (ICP OES). A validação do método (incluindo digestão e determinação) foi confirmada usando um material de referência certificado de farinha de trigo fornecido pelo National Institute of Standards & Technology (NIST). Considerando as 54 amostras analisadas, os resultados demonstraram que os macronutrientes: cálcio, magnésio, potássio e fósforo encontram-se em média de 0,27; 0,35; 1,71 e 1,92 mg g-1, com variação da concentração de 0,11-1,96; 0,19-0,51; 0,76-3,16 e 0,81-7,15 mg g-1, respectivamente. Os micronutrientes: cobre, ferro, manganês e zinco encontram-se em média de 1,84; 37,82; 8,25 e 9,41 µg g-1, com a variação de concentração de 1,00-2,80; 10,46-146,58; 3,89-14,74 e 5,07-13,93 µg g-1, respectivamente. Os resultados foram também avaliados usando as técnicas de análise multivariadas: análise de componente principal (PCA) e análise de agrupamento hierárquico (HCA).

In the present paper, the mineral composition of wheat flour consumed in Brazil was evaluated. In the sampling step 54 samples were collected in 15 cities, including principal Brazilian cities such as: São Paulo, Rio de Janeiro, Salvador, Porto Alegre, Recife and others. The elements determinate were: calcium, copper, magnesium, manganese, iron, phosphorus, potassium and zinc. The samples were digested using nitric acid and hydrogen peroxide in open system. The analytical technique employed was Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES). The method validation (including digestion and determination) was performed using a certified reference material of wheat flour furnished by National Institute of Standards & Technology (NIST). Considering the 54 samples analyzed, the results demonstrated that the macronutrients: calcium, magnesium, potassium and phosphorus have average contents of 0.27, 0.35, 1.71 and 1.92 mg g-1, for concentration ranges of 0.11-1.96, 0.19-0.51, 0.76-3.16 and 0.81-7.15 mg g-1, respectively. The micronutrients: copper, iron, manganese and zinc have average contents of 1.84, 37.8, 8.2 and 9.4 µg g-1, for concentration ranges of 1.00-2.80, 10.5-146.6, 3.9-14.7 and 5.1-13.9 µg g-1, respectively. The results were also evaluated using the multivariate analysis techniques: principal component analysis (PCA) and hierarchical cluster analysis (HCA).

Um procedimento em batelada é proposto para separação e pré-concentração de cádmio, chumbo, níquel e zinco em amostras de salmoura. O método baseia-se na adsorção dos íons metálicos sobre a fase sólida composta de ditizona co-cristalizada com naftaleno microcristalino, na faixa de pH de 8,5 – 9,1. Ácido nítrico é utilizado para re-extrair os cátions da fase sólida, os quais são determinados por ICP-OES. Vários parâmetros, tais como efeito do pH, do tempo de agitação e da quantidade da fase sólida foram estudados sistematicamente visando otimizar as condições para a determinação de quantidades traço de Cd, Cu, Pb, Ni e Zn em amostras sintéticas de salmoura. Os limites de detecção obtidos, expressos em mg L-1, foram: 44 (Zn), 11 (Ni), 30 (Cd), 47 (Pb) e 11 (Cu). A precisão do procedimento foi estabelecida pela medida de 10 replicatas com 250 μg L-1 de cada íon e os desvios padrão relativos foram de 2,71 % (Cd), 2,15 % (Cu), 1,53 % (Pb), 2,47 % (Ni) e 2,78 % (Zn). A exatidão do procedimento foi confirmada pelo método de adição de analitos e os resultados obtidos indicaram recuperação quantitativa (≥ 95 %).

A procedure for separation and pre-concentration of trace amounts of cadmium, copper, lead, nickel, and zinc in brine samples has been proposed. It is based on the adsorption of metal ions onto dithizone co-crystallized with microcrystalline naphthalene, in the pH range 8.5-9.1. Nitric acid is used to back-extract the cations from the solid phase, which are measured by ICP-OES. Various parameters, such as the effect of pH, stirring time, and amounts of solid phase, have been studied in detail, to optimize the conditions for the determination of trace amounts of Cd, Cu, Pb, Ni and Zn in synthetic brine samples. The limits of detection values expressed in μg L-1 are 44 (Zn), 11 (Ni), 30 (Cd), 47 (Pb) and 11 (Cu). The precision of the procedure was determined by running 10 replicate samples, each one containing 250 μg L-1 of each element and the relative standard deviations were 2.71 % (Cd), 2.15 % (Cu), 1.53 % (Pb), 2.47 % (Ni), and 2.78 % (Zn). The accuracy of the procedure was confirmed by applying the analyte additions method and the results indicated that quantitative recoveries (≥ 95 %) were obtained.

In the present work four different analytical methodologies were studied for the determination of iron and titanium in Portland cement. The cement samples were dissolved with hot HCl and HF, being compared Fe and Ti concentrations through four analytical methods: molecular absorption spectrophotometry using the reagents 1,2-hydroxybenzene-3,5-disulfonic acid (Tiron) and the 5-chloro-salicylic acid (CSA), inductively coupled plasma atomic emission spectrometry (ICP-AES) and flame atomic absorption spectrophotometry (FAAS). In the spectrophotometric determinations were studied pH conditions, reagents addition order, interferences, amount of reagents, linear range and stability of the system. In the techniques of ICP-AES and FAAS were studied the best lines, interferences, sensibility and linear range. The obtained results were compared and the agreement was evaluated among the methods for the determination of the metals of interest.