Um procedimento relativamente simples e sensível com detecção espectrofluorimétrica foi desenvolvido para a determinação de cistina e cisteína por sistema de injeção em fluxo com determinação seqüencial. Esse método é fundamentado na redução de Tl(III) com cisteína em meio ácido, produzindo o reagente fluorescente TlCl3(2-) (λex = 227 nm, λem = 419 nm). Antes da injeção, a solução da amostra foi dividida em dois fluxos. O primeiro fluxo foi tratado com coluna de redução de Cd e então refluxado com a solução do carregador para reagir em pH 5,0 com Tl(III), passado através de uma cela de reação de 100 cm e posteriormente para a cela fluxo do espectrofluorímetro, onde a intensidade de fluorescência foi medida (λex = 227 nm, λem = 419 nm). Esse sinal está relacionado às concentrações de cistina e cisteína. O segundo fluxo da solução de amostra foi injetado diretamente no fluxo carregador para reagir e, então, pela cela de reação e detector para medida da intensidade de fluorescência. O sinal nessa etapa é relacionado apenas à cisteína. Assim, o conteúdo de cistina foi determinado diretamente da diferença entre os dois sinais. Cistina e cisteína podem ser determinadas no intervalo de 0,10 a 5,50 µmol L-1 e 0,20 a 8,0 µmol L-1, respectivamente, em uma razão de 20 amostras por hora. O limite de detecção (3s/k) foi 0,10 µmol L-1 para os dois analitos. Os desvios padrões relativos para a determinação de dez replicatas de 4,0 e 3,5 µmol L-1 de cistina ou cisteína foram 1,1% e 1,8%, respectivamente. A influência de substâncias interferentes foi estudada. O método proposto foi aplicado com sucesso na determinação seqüencial de ambos analitos em amostras farmacêuticas.
A relatively simple and sensitive procedure with spectrofluorimetric detection was developed for the determination of cystine and cysteine by flow injection system with sequential determination. This method is based on the reduction of Tl(III) with cysteine in acidic media, producing a fluorescence reagent, TlCl3(2-) (λex = 227 nm, λem = 419 nm). Before injection, the sample solution was divided into two streams. The first stream was treated with Cd reduction column and then joined with the carrier to react with Tl(III) at pH 5.0 and then passed through a 100 cm reaction coil to the flow cell of the spectrofluorimeter, where the fluorescence intensity was measured (λex = 227 nm, λem = 419 nm). This signal is related to cystine and cysteine concentrations. The second stream of sample solution was injected directly into the carrier stream to react with the reagents and then passed through the reaction coil and detector for measuring the fluorescence intensity. The signal in this step is related only to cysteine. Thus, the cystine content was determined directly from difference of the two signals. Cystine and cysteine can be determined in the range of 0.10 to 5.50 µmol L-1 and 0.20 to 8.0 µmol L-1, respectively, at a rate of 20 samples per hour. The limit of detection (3s/k) was 0.10 µmol L-1 for both analytes. The relative standard deviations for ten replicates determination of 4.0 and 3.5 µmol L-1 cystine or cysteine were 1.1% and 1.8%, respectively. The influence of potential interfering substances was studied. The proposed method was successfully applied to the sequential determination of both analytes in pharmaceutical samples.