ABSTRACT The dendritic-type microstructure of the 35Ni-25Cr-Nb alloy, in the as-cast condition, consists of an austenitic matrix and two types of eutectic primary carbides; Nb-rich MC type and Cr-rich M23C6 type both presents in interdendritic edges and grain boundaries. During aging at 800ºC for different times, M23C6 type secondary carbides precipitate in the matrix while MC carbides would transform to a Ni-Nb silicide, known as G phase (Ni16Nb6Si7). The microstructure was characterized by optical microscopy, scanning electron microscopy (SEM) with mapping, electron backscatter diffraction (EBSD) and dilatometry, in order to detect the presence of this undesirable phase and analyze the conditions under which it is presented. Silicon was found on edges of primary Nb-rich carbides. This could be indicating that the transformation of this carbide towards silicide rich in Ni and Nb, is in an incipient stage. Apparently, the transformation could be taking place from the outside to the inside of the Nb carbide. In addition, the contraction observed in the dilatometry curve would be associated to the difference on the thermal expansion coefficients between the matrix and the primary eutectic carbides and not to the transformation of the M7C3-type carbide to the M23C6-type.
RESUMEN La microestructura dendrítica de la aleación 35Ni-25Cr-Nb, en su condición as-cast, está constituida por una matriz austenítica y carburos eutécticos primarios de dos tipos: MC ricos en Nb y M23C6 ricos en Cr presentes en bordes interdendríticos y bordes de grano. Durante el envejecimiento a 800ºC y diferentes tiempos, en la matriz precipitan carburos secundarios del tipo M23C6, mientras que los carburos del tipo MC, transformarían al siliciuro conocido como fase G (Ni16Nb6Si7). Se caracterizó la microestructura de la aleación mediante microscopía óptica, microscopía electrónica de barrido (SEM) con mapeo, difracción de electrones retrodispersados (EBSD) y ensayos de dilatometría, con el objeto de detectar la presencia de esta fase indeseable y analizar las condiciones bajo las cuales se presenta. Se encontró Si en bordes de carburos primarios de Nb. Esto podría estar señalando que, la transformación de este carburo hacia el siliciuro rico en Ni y Nb, se encuentra en una etapa incipiente. Aparentemente, la transformación podría estar realizándose desde afuera hacia adentro del carburo de Nb. Además, la contracción observada en la curva de dilatometría, estaría asociada a la diferencia entre coeficientes de dilatación térmica entre la matriz y los carburos eutécticos primarios y no a la transformación del carburo M7C3 hacia el tipo M23C6.