ABSTRACT The present work evaluated the effect of thermal treatment on the acoustic behavior of african mahogany wood (Khaya ivorensis A. Chev.) submitted to two types of thermal treatments called dry treatment, carried out in an oven at temperatures of 130, 160 and 190 °C, and wet treatment, using steam in an autoclave at temperatures and pressures of 123 °C and 1.2 kgf.cm−2 and 160 °C and 6.0 kgf.cm−2, respectively. Conjugated treatments were also carried out, where part of the samples first went through wet treatment and after that, through dry treatment. After treatments, the samples were submitted to acoustic evaluation through mechanical vibration tests, using the transverse impulse excitation technique, as reported for in the ASTM-E1876 standard. The fundamental resonance frequency (fr), the specific transverse dynamic (Espe), the logarithmic decrement of damping (LDD) and the acoustic conversion efficiency (ACE) were determined. According to the results obtained, the wood treated only by steam in an autoclave at 123 °C stood out in relation to the other treatments, including the conjugated was. An increase of 7.3 % was verified for the fr, 10.8 % for Eesp and 26.4 % for ECA, and reduction of 11.9 % for Dl. It was observed the optimization of African mahogany’s acoustic properties.
RESUMO O presente trabalho avaliou o efeito do tratamento térmico no comportamento acústico em madeira de mogno africano (Khaya ivorensis A. Chev.) submetida a dois tipos de tratamentos, denominados tratamento a seco (TS), realizado em mufla elétrica a temperaturas de 130, 160 e 190 °C, e tratamento hidrotérmico (TH), utilizando vapor de água em autoclave nas temperaturas e pressões de 123 °C e 1,2 kgf.cm−2 e 160 °C e 6,0 kgf.cm−2, respectivamente. Os tratamentos foram realizados em conformidade com um planejamento experimental. Após os tratamentos, as amostras foram submetidas à avaliação acústica através de ensaios por vibração mecânica, utilizando a técnica de excitação por impulso transversal, como previsto na norma ASTM-E1876. As grandezas acústicas determinadas foram: frequência de ressonância transversal (fr(Tr)), decaimento logarítmico transversal (Dl(Tr)), módulo de elasticidade dinâmico específico transversal (Eesp(Tr)) e eficiência da conversão acústica transversal (ECA(Tr)). De acordo com os resultados obtidos, a madeira modificada em autoclave a 123 °C se destacou em relação aos outros tratamentos, inclusive dos conjugados. Foram verificados aumentos de 7,3 % para fr(Tr), 10,8 % para o Eesp(Tr) e 26,4 % para o ECA(Tr), e redução de 11,9 % para Dl. Tais resultados indicam otimização das propriedades do mogno africano para aplicações acústicas.