RESUMO A maior procura por dentes brancos tem impulsionado a comercialização de novos produtos clareadores, especialmente aqueles que possam ser de fácil acesso, que não precisem supervisão direta do dentista, e que tenham um custo acessível para o consumidor. Entre esses novos produtos diversos dentifrícios, denominados como branqueadores, têm sido comercializados. Destes o mais recente é o dentifrício a base de carvão ativado, que entrou no mercado prometendo clarear os dentes, enquanto que se apresenta como um produto saudável e ecológico, porém sem grande respaldo científico. Portanto, esta revisão da literatura teve o objetivo de avaliar a capacidade branqueadora e os efeitos no esmalte após o uso de produtos de higiene oral contendo carvão ativado. Após avaliar diversos artigos in vitro sobre o tema, pode-se concluir que estes produtos não tem um efeito clareador propriamente dito e sim agem como removedores de pigmentos extrínsecos. Porém, grande parte dos produtos contendo carvão ativado poderiam apresentar um efeito abrasivo sobre a superfície do esmalte, pelo que se sugere cautela sobre a indicação destes dentifrícios, especialmente para os pacientes sujeitos a maiores riscos de desgaste dental, como recessão gengival, fluxo salivar reduzido, alto risco de cárie ou erosão dentária. clareadores acesso dentista consumidor dentifrícios branqueadores comercializados ecológico científico Portanto tema podese pode extrínsecos Porém dental gengival reduzido dentária

ABSTRACT The increased demand for white teeth has intensified the commercialization of new bleaching products, particularly those that can be accessed easily, do not require the direct supervision of a dentist, and are affordable. Among these new products, several dentifrices publicized as bleaching products have been developed, most recent of them being the activated charcoal toothpaste, which entered the market promising to whiten teeth. While it is portrayed as a healthy and ecological product, there is a paucity of scientific evidence supporting its alleged benefits. Therefore, this literature review aimed to evaluate activated charcoal containing oral hygiene products on their bleaching ability and effects on enamel. After analyzing several in vitro studies on the subject, it can be concluded that these products do not have a bleaching effect per se, but act by removing the extrinsic pigments from the teeth. However, most of the products containing activated charcoal could have abrasive effects on the surface of the enamel. Therefore, it is suggested caution about the indication of these dentifrices, especially for individuals predisposed to dental wear, such as gingival recession, reduced salivary flow, and high risk of caries or dental erosion. easily dentist affordable developed toothpaste product benefits Therefore enamel subject se However wear recession flow erosion

Aim The aim of this study was to investigate the impact of pre-treatment with ethanolic solutions of caffeic acid phenethyl ester (CAPE) at varying concentrations on the dentin collagen matrix, specifically focusing on its biomodification potential. This was assessed through evaluations of the modulus of elasticity and changes in mass. Methods Seventy dentin collagen matrices (demineralized sticks) were prepared to receive treatments with ethanolic solutions of CAPE at concentrations of 0.05%, 0.1%, 0.5%, or 2.5%, or with control treatment solutions (distilled water or ethanol) for one hour. The dentin matrices were evaluated for modulus of elasticity and mass before (baseline), immediately after treatment (immediately), and after storage in Simulated Body Fluid (SBF) for time intervals of 1 and 3 months. Results Generalized linear models for repeated measures over time indicated no significant differences between groups (p=0.7530) or between different time points (p=0.4780) in terms of the modulus of elasticity. Regarding mass variation, no differences were observed in the time interval between 1 month and the immediate time (p=0.0935). However, at the 3-month mark compared to the immediate time, the 0.1% CAPE group exhibited less mass loss compared to the water group (p=0.0134). Conclusion This study concludes that various concentrations of CAPE in an ethanolic solution did not affect the modulus of elasticity of dentin, suggesting that CAPE lacks biomodifying potential in this context. However, it was observed that 0.1% CAPE positively influenced the variation in mass over different evaluation time intervals. pretreatment pre (CAPE matrix demineralized sticks 005 0 05 0.05% 01 5 0.5% 25 2 2.5% distilled ethanol hour baseline, baseline , (baseline) immediately, (immediately) SBF (SBF months p=0.7530 p07530 p 7530 (p=0.7530 p=0.4780 p04780 4780 (p=0.4780 p=0.0935. p00935 p=0.0935 . 0935 (p=0.0935) However 3month 0.1 p=0.0134. p00134 p=0.0134 0134 (p=0.0134) context 00 0.05 0.5 2.5 (baseline (immediately p=0.753 p0753 753 (p=0.753 p=0.478 p0478 478 (p=0.478 p0093 p=0.093 093 (p=0.0935 0. p0013 p=0.013 013 (p=0.0134 0.0 2. p=0.75 p075 75 (p=0.75 p=0.47 p047 47 (p=0.47 p009 p=0.09 09 (p=0.093 p001 p=0.01 (p=0.013 p=0.7 p07 7 (p=0.7 p=0.4 p04 4 (p=0.4 p00 p=0.0 (p=0.09 (p=0.01 p=0. p0 (p=0. (p=0.0 p=0 (p=0 p= (p= (p

Abstract Objective To characterize activated charcoal and 2% hydrogen peroxide-based toothpastes and investigate their effects on roughness, color change, and gloss of bulk-fill composite resin. Methodology Composite resin specimens (Aura Bulk Fill, SDI) were subjected to 5,000 brushing cycles with regular toothpaste (Colgate Total 12, [RT]), activated charcoal toothpaste (Bianco Dental Carbon, [AC]), or hydrogen peroxide-containing toothpaste (Colgate Luminous White Advanced, [HP]), with or without coffee exposure. The pH, particle characterization by scanning electron microscopy (SEM), and weight% of solid particles in the toothpaste were assessed. Roughness (Ra) was evaluated using a surface profile-measuring device, color change (∆Eab/∆E00) by reflectance spectrophotometer, and gloss unit (GU) by glossmeter. Kruskal–Wallis, Dunn, Friedman, and Nemenyi tests were used, and the correlation coefficient test was performed between Ra and GU (α=0.05). Results RT presented a higher Ra after brushing and did not change after staining with coffee; moreover, the ∆Eab/∆E00 values were higher for RT than HP. Regarding gloss, AC and HP obtained higher values compared to RT. A significant negative correlation between gloss and Ra was found for RT exposed to coffee. All toothpastes had a neutral pH; however, RT had the largest percentage of solids by weight. SEM images showed particles of many sizes: irregular shape (RT), more regular particles (AC), and spherical clusters (HP). Although surface roughness, color change, and gloss may compromise the longevity of restorations, the whitening toothpastes tested did not promote more morphology changes than regular toothpastes. 2 peroxidebased peroxide based roughness bulkfill bulk fill Aura Fill SDI 5000 5 000 5,00 Colgate 12 RT, , [RT]) Bianco Carbon AC, [AC]) peroxidecontaining containing Advanced HP, [HP]) exposure pH SEM, (SEM) weight assessed (Ra profilemeasuring profile measuring device EabE00 EabE Eab E00 E (∆Eab/∆E00 spectrophotometer (GU glossmeter KruskalWallis Kruskal Wallis Kruskal–Wallis Dunn Friedman used α=0.05. α005 α α=0.05 . 0 05 (α=0.05) moreover ∆Eab/∆E0 however sizes (RT) (AC) (HP) restorations 500 00 5,0 1 [RT] [AC] [HP] (SEM EabE0 E0 (∆Eab/∆E0 α00 α=0.0 (α=0.05 ∆Eab/∆E (RT (AC (HP 50 5, [RT [AC [HP (∆Eab/∆E α0 α=0. (α=0.0 α=0 (α=0. α= (α=0 (α= (α

ABSTRACT Aim To evaluate the occlusal and internal marginal adaptation of inlay restorations made of different materials, using CAD-CAM. Methods Preparations were made for MOD inlays of one-third intercuspal width and 4 mm depth in 30 third human molars. The teeth were restored using CAD-CAM materials (n=10) of nanoceramic resin (Lava Ultimate), polymer-infiltrated ceramic network (VITA ENAMIC), or lithium disilicate glass-ceramic (IPS e.max CAD). The specimens were cemented with dual resin cement and sectioned at the center of the restoration, after which the two halves were evaluated, and photographed The occlusal and internal discrepancy (µm) was determined at five points: cavosurface angle of the occlusal-facial wall (CA-O); center of the facial wall (FW); faciopulpal angle (FPA); center of the pulpal wall (PW); and center of the lingual wall (LW). The data were submitted to the Kruskal-Wallis and the Dunn tests (α=0.05). Results No difference was observed among the materials regarding the occlusal discrepancy at the CA-O, FPA, or PW internal points. The e.max CAD measurement at FW showed larger internal discrepancy than that of Lava (p=0.02). The internal discrepancy at LW was greater for e.max CAD than VITA ENAMIC (p=0.02). Conclusion Lithium disilicate glass-ceramic presented greater internal discrepancy in relation to the surrounding walls of the inlay preparations.

Abstract Titanium dioxide nanotubes (TiO2-nts) were incorporated into a glass ionomer cement (GIC) with improved mechanical properties and antibacterial activity. The aims of the present in vitro study were to define the elemental characterization, aluminum (Al) release rate, and initial working time for GIC reinforced with TiO2-nts, in an experimental caries model. TiO2-nts were incorporated into GIC powder components at 5% by weight, and compared with unblended GIC. Experimental approaches used energy-dispersive spectrometry (EDS), atomic absorption spectrophotometry (AAS), and brightness loss to define surface element properties, Al release rates, and initial working time, respectively. Statistical analysis was performed by 2-way ANOVA, Tukey’s test, generalized linear models, and Student’s t test (a = 0.05). EDS data analysis revealed that TiO2-nts incorporated into GIC had no significant impact on the typical elemental composition of GICs in an in vitro caries model. Regarding the demineralizing solution, GIC with TiO2-nt significantly decreased the Al release rate, compared with the control group (p < 0.0001). Moreover, TiO2-nt incorporated into GIC did not alter the initial working time of the material (p > 0.05). These findings add information to our scientific body of knowledge concerning the potential impact of TiO2-nt on the performance of conventional GICs.

Abstract This study reviews the knowledge on the use of conventional dental whitening and the use of enzymes as a new approach in bleaching. A review of the literature was based on academic articles and on patents related to the use of enzymes in dental bleaching. Tooth whitening techniques used nowadays are well reported in the literature, and its mechanism of action consists of an oxidoreduction reaction with the release of free radicals. The great instability of radicals, when in contact with the tissues, promotes oxidation and reduction in the size of the pigment chains incorporated into them. These pigments are eventually broken down into smaller and smaller molecular chains and end up being diffused from the dental structure. In turn, the use of enzymes aimed at tooth whitening can be a less harmful alternative to the tooth because their specificity regarding the substrate makes them of great interest to perform specific reactions, reducing collateral effects. The use of proteolytic enzymes and oxidoreductases paired with the application of peroxides, can be a promising alternative for obtaining even better results in the dental bleaching process.

Resumo Introdução as resinas compostas são indicadas para reconstrução de paredes proximais e a avaliação das propriedades das resinas compostas bulk-fill flow expostas ao desafio ácido mostra-se necessária. Objetivo avaliar a microdureza e rugosidade em diferentes profundidades de fotoativação de resinas compostas bulk-fill flow (Filtek Bulk Fill Flow; SureFil SDR Flow; Tetric N Ceram Bulk fill) e convencional (controle, Filtek Z350 XT) submetidas ao desafio ácido. Material e método quarenta amostras retangulares (3x3x4 mm) foram confeccionadas utilizando uma matriz de poliacetal. Para simular o desafio ácido, as amostras foram imersas em uma solução desmineralizante. Cada amostra teve a microdureza Knoop (KHN) e rugosidade (Ra) avaliadas em três profundidades (superficial, média e cervical), considerando a superfície lateral da amostra. Os dados foram submetidos aos testes de Kruskal-Wallis, Friedman e Dunn com nível de significância de 5%. Resultado comparando as resinas compostas entre si, nas regiões superficial (p=0,693), média (p=0,053) e cervical (p=0,176), não houve diferença nos valores de KHN. Também não houve diferenças na rugosidade entre os materiais nas regiões superficial (p=0,356), média (p=0,734) e cervical (p=0,207). Apenas o Filtek Z350 XT (p=0,027) apresentou menor diferença de KHN na região intermediária causada pelo desafio ácido. As mudanças na rugosidade mostraram que a maior diferença foi na região cervical para Bulk Fill Flow SDR (p=0,014) e Tetric N-Ceram Bulk Fill (p=0,003), com aumento após o desafio ácido. Conclusão após desafio ácido, as resinas compostas bulk-fill flow apresentaram alterações semelhantes às apresentadas pela resina composta convencional nanoparticulada.

Abstract Introduction composite resins are indicated to the reconstruction of proximal walls and the evaluation of properties of flow bulk-fill composite resins exposed to acid challenge is necessary. Objective to evaluate the microhardness and roughness at different depths of photoactivation of bulk-fill flow composites (Filtek Bulk Fill Flow; SureFil SDR Flow; Tetric N Ceram Bulk fill) and conventional composite resin (control, Filtek Z350 XT) subjected to acid challenge. Material and method forty composites brick shaped specimens (3x3x4 mm) were made using a polyacetal matrix. To simulate pH challenges, the samples were immersed in a demineralizing solution. Each sample had Knoop microhardness (KHN) and roughness (Ra) evaluated at three depths (superficial, medium, and cervical), considering the lateral surface of the sample. Data were submitted to Kruskal-Wallis, Friedman's and Dunn's tests with a significance level of 5%. Result comparing the composites among themselves, in superficial (p=0.693), medium (p=0.053) and cervical (p=0.176) regions, there was no difference in the KHN values. There were also no differences in roughness between the composites in superficial (p=0.356), medium (p=0.734) and cervical (p=0.207) regions. Only the Filtek Z350 XT (p=0.027) showed less difference in KHN in the middle region caused by acid challenge. Changes in roughness showed that the greatest difference was at the cervical region for Bulk Fill Flow SDR (p=0.014) and Tetric N-Ceram Bulk Fill (p = 0.003) with an increase after acid challenge. Conclusion after acid challenge, bulk-fill flow composites showed alterations similar to those presented by the conventional nanoparticulate resin composite.