RESUMO O objetivo desta pesquisa foi avaliar a influência de diferentes épocas de plantio e variáveis meteorológicas no desempenho produtivo da mandioca industrial na região do Agreste de Alagoas. Os tratamentos foram cinco datas de plantio, com espaçamento temporal de 25 dias entre elas: D1 - 10 de abril, D2 - 05 de maio, D3 - 30 de maio, D4 - 24 de junho e D5 - 19 de julho. O período experimental foi de abril de 2021 a setembro de 2023, dois ciclos de cultivo. Utilizou-se o delineamento em blocos casualizados, com quatro repetições. As variáveis analisadas foram: dados agrometeorológicas e de crescimento e produção da cultura. Na região do Agreste de Alagoas, entre as estações chuvosa e seca, a ET0 média diária varia de 2,9 a 4,7 mm, respectivamente. A temperatura média do ar é 24,3 °C e atende as demandas térmicas da cultura da mandioca. A precipitação anual é suficiente para garantir a produção de mandioca, porém, há sazonalidade nas chuvas, com período seco da primavera ao verão, o que prejudica plantios mais tardios. Na região do Agreste de Alagoas, o melhor período para o plantio da mandioca é de 10 de abril a 5 de maio, que é o início do período chuvoso da região e garante melhores resultados em: altura do dossel vegetativo (3,2 m), diâmetro do caule (2,8 cm), índice de área foliar (3,0), comprimento máximo (43,1 cm), número (6,6) e rendimento de raízes (72,8 t ha-1), biomassa total (145 t ha-1) e teor de amido (34,3%).

ABSTRACT The aim of this study was to evaluate the influence of different planting times and meteorological variables on the productive performance of industrial cassava in the Agreste region of Alagoas state, Brazil. The treatments were five planting dates, 25 days apart: D1 - April 10, D2 - May 5, D3 - May 30, D4 - June 24 and D5 - July 19. The experiment was conducted from April 2021 to September 2023 (two cultivation cycles), using randomized blocks, with four replicates. The variables analyzed were agrometeorological data, crop growth and yield. In the Agreste region of Alagoas, the average daily ET0 varies from 2.9 to 4.7 mm between the rainy and dry seasons, respectively. The average temperature of 24.3 °C meets the thermal demands of cassava cultivation. Although annual rainfall is sufficient to guarantee cassava production, it is seasonal, with a dry period from spring to summer, which compromises subsequent plantings. In the Agreste region of Alagoas, the best time to plant cassava is from April 10 to May 5, which is the beginning of the rainy season and ensures better vegetative canopy height (3.2 m), stem diameter (2.8 cm), leaf area index (3.0), maximum root length (43.1 cm), number (6.6) and yield (72.8 t ha-1), total biomass (145 t ha-1) and starch content (34.3%).

RESUMO A principal técnica usada para controlar a umidade e temperatura dos grãos em armazéns é o processo de aeração. A uniformidade do fluxo de ar nesse processo é fundamental para manter a qualidade do produto armazenado, e a modelagem matemática e simulação computacional são ferramentas fundamentais para otimizar o projeto desses sistemas. O objetivo do presente estudo é a realização de uma análise comparativa entre o modelo Khatchatourian e o modelo Darcy-Forchheimer, buscando identificar a viabilidade da utilização do modelo Darcy-Forchheimer para simulação do fluxo de ar em armazéns de soja. Neste trabalho, foram realizadas simulações do mesmo armazém utilizando o modelo Khatchatourian e o modelo Dary-Forchheimer. O Modelo Darcy-Forchheimer reproduziu adequadamente os dados experimentais, mas para simulações realizadas no domínio de um armazém, o modelo Khatchatourian apresentou um comportamento mais realista. Para a aplicação do modelo Darcy-Forhheimer deve ser considerado o efeito de compactação dos grãos, de tal forma que os parâmetros D e F dependam da altura da camada do produto. Além disso, as condições de contorno devem ser consideradas como pressão constante em vez de fluxo constante.

ABSTRACT The primary method for managing grain moisture and temperature in silos is through the aeration process. Ensuring uniform airflow in this process is essential for preserving the quality of the stored product. Mathematical modeling and computer simulation are important for optimizing the design of these systems. The objective of this study was to make a comparative analysis between the Khatchatourian model and the Darcy-Forchheimer model to identify the feasibility of using the Darcy-Forchheimer model for simulating airflow in soybean silos. Simulations were performed using the two models for the same silo. The Darcy-Forchheimer model adequately simulated the experimental data, but for simulations within the domain of a silo, the Khatchatourian model exhibited a more realistic result. The effect of grain compaction should be considered for the application of the Darcy-Forchheimer model, as parameters D and F depend on the height of the product layer. Boundary conditions should be considered constant pressure rather than constant flow.

In this study, we report the synthesis of acridone derivatives and their potential as photosystem II (PSII) inhibitors, as well as their preand post-emergence herbicidal activities through chlorophyll a fluorescence and germination assays. Among the compounds tested for PSII activity, acridin-9(10H)-one showed the most promising results, reducing the performance index on an absorption basis and decreasing the quantum yield for electron transport compared to the control. These findings suggest an inhibitory effect on PSII within the electron transport chain. Additionally, 2-chloroacridin-9(10H)-one and 9(10H)-acridone-4-carboxylic acid exhibited post-emergence herbicidal activity against Amaranthus lividus and Amaranthus viridis weeds, respectively, leading to a reduction in radicle and hypocotyl lengths. Furthermore, we applied a molecular docking approach with the D1 protein and 4-hydroxyphenylpyruvate dioxygenase to investigate the structure-activity relationships among the acridone derivatives with these enzymes. The analysis highlighted the importance of the carbonyl group and aromatic substituents on the acridone scaffold facilitating ligand interactions, especially through hydrogen bonding. Consequently, our research group aims to optimize these molecular features to develop new, potent bioactive molecular scaffolds.

FROM SAMPLING TO PURIFICATION: METHODOLOGIES AND TECHNIQUES FOR EVALUATION OF SILOXANES IN BIOGAS. Biogas has emerged as an important source of clean and renewable energy, with its energy viability dependent on purity grade. Primarily composed by methane and carbon dioxide, biogas can also contain nitrogen, water vapor, oxygen, hydrogen sulfide, ammonia, hydrocarbons and siloxanes. Regarding methane, all other components are considered contaminants, with volatile methylsiloxanes (VMSs) being the major challenge in terms of control and removal. VMSs are commonly found in personal care products and industrial applications, and their presence is highly detrimental to biogas energy generation equipment by forming silica deposits that cause fouling and damage, reducing operational efficiency and system longevity. In this context, three topics are crucial: (i) sampling techniques (bags, gas cylinders, canisters, adsorbent tubes, and impingers); (ii) detection and quantification methods for VMSs, highlighting gas chromatography coupled with mass spectrometry; and (iii) biogas purification/removal strategies (adsorption, absorption, refrigeration/condensation, biological degradation, and membrane separation). This review explores the methodologies involved in these topics, presenting literature research approaches and their effectiveness regarding siloxanes, contributing to biogas applications.

ABSTRACT Cowpea (Vigna unguiculata (L.) Walp.) is one of the main grain crops that form part of Brazilian food consumption, but its production is affected by edaphoclimatic conditions and high salinity of the irrigation water. The aim of this research was to evaluate the effects of chitosan concentrations on the physiology and production components of cowpea grown under salt stress. The experiment was conducted in a greenhouse, adopting a completely randomized design, in a 2 × 5 factorial scheme, with two levels of electrical conductivity of irrigation water (ECw - 0.6 and 4.0 dS m-1) and five concentrations of chitosan (0, 0.25, 0.50, 0.75, and 1.00 g L-1), with four replicates, each of which consisting of three plants. Irrigation water with electrical conductivity of 4.0 dS m-1 negatively affected the synthesis of photosynthetic pigments, chlorophyll a fluorescence, and grain production of cowpea cv. BRS Tapaihum. Foliar application of chitosan at concentrations between 0.46 and 0.71 g L-1 mitigated the deleterious effects of salt stress on photochemical efficiency, grain production, and grain index per plant. Chitosan applications under irrigation water of electrical conductivity of 0.6 dS m-1 promoted an increase in the mean pod length, grain production and grain index of cowpea plants cv. BRS Tapaihum. Vigna L. L (L. Walp. Walp consumption greenhouse design scheme ECw 06 0 6 0. 40 4 4. m1 m 1 0, (0 025 25 0.25 050 50 0.50 075 75 0.75 100 00 1.0 L1, L1 , L-1) replicates m- pigments fluorescence cv Tapaihum 046 46 0.4 071 71 0.7 L- efficiency plant length (L ( 02 0.2 05 0.5 07 7 10 1. 04

RESUMO O feijão-caupi (Vigna unguiculata (L.) Walp.) é um dos principais grãos que fazem parte do consumo alimentar dos brasileiros, no entanto, sua produção é afetada pelas características edafoclimáticas e pela alta salinidade da água de irrigação. Objetivou-se com a pesquisa avaliar os efeitos das concentrações de quitosana na fisiologia e produção de feijão-caupi sob estresse salino. O experimento foi realizado em casa de vegetação em Campina Grande, PB, utilizando-se o delineamento inteiramente casualizado, em esquema fatorial 2 × 5, sendo dois níveis de condutividade elétrica da água de irrigação (CEa - 0,6 e 4,0 dS m-1) e cinco concentrações de quitosana (0; 0,25; 0,50; 0,75 e 1,00 g L-1) com quatro repetições cada uma consistindo de três plantas. A irrigação com água de condutividade elétrica de 4,0 dS m-1 afetou negativamente a síntese de pigmentos fotossintéticos, a fluorescência da clorofila a e a produção de grãos de feijão-caupi cultivar BRS Tapaihum. A aplicação foliar de quitosana entre as concentrações de 0,46 e 0,71 g L-1 amenizou os efeitos do estresse salino, aumentando a eficiência fotoquímica, a produção e o índice de grãos por planta. As aplicações de quitosana sob água de irrigação com condutividade elétrica de 0,6 dS m-1 promoveram aumento no comprimento médio da vagem, produção de grãos e índice de grãos das plantas de feijão-caupi cv. BRS Tapaihum. feijãocaupi feijão caupi Vigna L. L (L. Walp. Walp brasileiros entanto Objetivouse Objetivou se salino Grande PB utilizandose utilizando casualizado 5 CEa 06 0 6 0, 40 4 4, m1 m 1 (0 0,25 025 25 0,50 050 50 075 75 0,7 100 00 1,0 L1 m- fotossintéticos Tapaihum 046 46 0,4 071 71 L- fotoquímica planta vagem cv (L ( 0,2 02 0,5 05 07 7 10 1, 04

Serial numbers are marks present on several day-to-day objects, created by manufacturers for purposes such as quality control, product tracking and to prevent counterfeiting. In the case of firearms, these characters can be obliterated or damaged by natural processes or intentionally by criminals to prevent positive identification of stolen property. One non-destructive method employed by crime laboratories for the restoration of obliterated characters is the magnetic particle method. The present work aims to study the synthesis and application of waste-made magnetic nanoparticles in the recovery of adulterated markings. A set of analytical-grade materials and metallic waste magnetic nanoparticles were synthesized for comparison purposes. Chemical characterization tests by X-ray fluorescence, morphological tests by scanning electron microscopy (SEM), and magnetization tests by vibrating sample magnetometer (VSM) were performed. The efficacy of the synthesized nanoparticles was tested on 1020 steel plates previously engraved and adulterated by sanding. Both homemade magnetic nanoparticles demonstrated superior performance compared to commercial magnetic particles. The application of homemade magnetic particles, especially using waste as the source of production, decreases the cost of the material and is environmentally friendly. The development of this material makes magnetic serial number restoration a better option for widespread use in forensic procedures. daytoday day objects control counterfeiting firearms property nondestructive non destructive wastemade made markings analyticalgrade analytical grade Xray X ray fluorescence SEM, SEM , (SEM) VSM (VSM performed 102 sanding particles production friendly procedures (SEM 10 1

The history of the discovery, use, and development of dyes is closely linked to the history of humanity itself. Among the first records of human civilization are cave paintings made from, e.g., fruits, plants, minerals, and insects. Over the centuries, using different techniques, colors have been given to all types of materials and products, from clothing to food. The chemicals responsible for colors are dyes - a vast collection of molecules of the most varied compositions, but which have in common the absorption of light within the visible window of the electromagnetic spectrum. This article aims not only to review the properties of some classes of natural dyes, their origins, and their applications but also to describe the various computational chemistry methods involved in designing new bio-inspired molecules. discovery use itself eg e g e.g. fruits plants minerals insects centuries techniques products food compositions spectrum origins bioinspired bio inspired e.g

ABSTRACT Regions with semi-arid climates have environmental conditions that result in abiotic stress to plants. The largest melon (Cucumis melo L.) production area in Brazil, the state of Rio Grande do Norte, has these climatic characteristics. Use of biostimulants in these production systems can mitigate effects of abiotic stress and increase yield and fruit quality. The objective in this study was to evaluate the physiological and production characteristics of melon, under the application of biostimulants. The biostimulants Acadian®, Folicist® and Nov@® were applied and compared to the control treatment (no biostimulants), in ‘Goldex’ and ‘McLaren’ melons. Nov@® led to higher CO2 assimilation, transpiration and stomatal conductance, as well as ascorbate peroxidase, in ‘Goldex’ and ‘McLaren’. Greater catalase was obtained with the application of Nov@®, while the use of Folicist® resulted in higher malondialdehyde content. The cultivar ‘McLaren’ exhibited the best physiological and biochemical performance, and ‘Goldex’ the best yield. Folicist® promotes physiological adaptations to stress without impairing photosynthetic activity. The biostimulants increased yield and number of fruits per plant and promoted physiological adaptations to semi-arid conditions. semiarid semi arid plants Cucumis L. L Brazil Norte quality Acadian Acadian® Folicist Nov Nov@ no biostimulants, , biostimulants) ‘Goldex Goldex ‘McLaren McLaren melons CO assimilation conductance peroxidase ‘McLaren. . content performance activity

RESUMO Regiões com climas semiáridos apresentam condições ambientais que resultam em estresses abióticos às plantas. A maior área de produção de melão (Cucumis melo L.) do Brasil, o Estado do Rio Grande do Norte, possui essas características climáticas. O uso de bioestimulantes nesses sistemas de produção pode mitigar os efeitos dos estresses abióticos e aumentar a produtividade e a qualidade dos frutos. O objetivo neste estudo foi avaliar as características fisiológicas e de produção do meloeiro, sob aplicação de bioestimulantes. Os bioestimulantes Acadian®, Folicist® e Nov@® foram aplicados e comparados ao tratamento controle (sem bioestimulantes), em melões ‘Goldex’ e ‘McLaren’. Nov@® proporcionou maior assimilação de CO2, transpiração e condutância estomática, assim como ascorbato peroxidase em ‘Goldex’ e ‘McLaren’. Maior catalase foi obtida pela aplicação de Nov@®, enquanto que o uso de Folicist® resultou em maior teor de malondialdeído. A cultivar McLaren apresentou o melhor desempenho fisiológico e bioquímico e a ‘Goldex’ o melhor rendimento. Folicist® promove adaptações fisiológicas aos estresses sem prejudicar a atividade fotossintética. Os bioestimulantes aumentaram a produtividade e o número de frutos por planta e promoveram adaptações fisiológicas às condições semiáridas. plantas Cucumis L. L Brasil Norte climáticas meloeiro Acadian Acadian® Folicist Nov Nov@ bioestimulantes, , bioestimulantes) ‘Goldex Goldex ‘McLaren. ‘McLaren . ‘McLaren’ CO2 CO estomática malondialdeído rendimento fotossintética semiáridas

Asphaltene aggregation mechanism is still a nebulous and controversial issue. Many authors argue that the aggregation of its components is due to π-stacking interactions, nonetheless, alkyl chains, heteroatoms, and even acidic groups are also constituents of asphaltenes and can play an important role in the chemistry of asphaltene. Excimers from pyrene are easily detected by fluorescence and were used in the current study to probe the effect of the side chain on the π-stacking capacity of pyrene. Pyrene was acylated with acyl chains varying from two to twelve carbon atoms, and the effect of the variation of the acyl chain length on excimer formation was followed by fluorescence emission spectroscopy. The results revealed that as the side chain grows from two to twelve carbon atoms the excimer/monomer ratio decreases and the excimer heat of formation drops from ΔH = -6.00 to -1.29 kcal mol-1. Further, the crystal structure of octanoyl pyrene (PC8) indicates that in the crystal structure, the aromatic moiety faces the acyl chain. This result was corroborated by density functional theory (DFT) calculations. Finally, the results were compared with two different asphaltenes and indicate that π-stacking cannot be assumed as the main driving force for asphaltene aggregation. issue πstacking π stacking interactions nonetheless heteroatoms spectroscopy excimermonomer monomer 6.00 600 6 00 -6.0 1.29 129 1 29 -1.2 mol1. mol1 mol 1. mol-1 Further PC8 PC (PC8 DFT (DFT calculations Finally 6.0 60 0 -6. 1.2 12 2 -1. mol- (PC 6. -6 -1 -

We report the electrochemical potential of conductive filaments produced with recycled polylactic acid (rPLA) alongside a mixture of graphite (Gpt) and/or carbon black (CB) and castor oil to create an electrode ready-to-use. Additively-manufactured electrodes (AMEs) were compared with commercial-conductive filament composed of PLA and CB. The Gpt-CB-rPLA and CB-rPLA sensors showed lower charge-transfer resistance (Rct) and a greater heterogenous rate constant, k0, (Rct= 1040 ± 50 Ω and 1810 ± 30 Ω and k0= 6.91 (± 0.58) × 103 and 5.31 (± 0.40) × 103 cm s-1, respectively) compared to the sensor from the commercial filament (Rct = 9620 ± 280 Ω and k0 = 3.62 (± 0.38) ×10-3 cm s-1). The electrochemical response of [Fe(CN6)]3-/4- displayed a peak-to-peak separation of 180 ± 8 mV (Gpt-CB-rPLA) and 240 ± 6 mV (CB-rPLA) compared to commercial AME (740 ±10 mV), without any surface treatment. The filaments were used to create a 2,4,6-trinitrotoluene (TNT) detection platform with linear range of 5-20 and 5-100 µmol L-1 for Gpt-CB-rPLA and CB-rPLA, respectively. The collector-detector device was applied for the analysis of a blast simulation. Finally, it is worth noting that the results obtained are without electrode treatment/activation, indicating that the rough surface of the additively manufactured electrode is an additional feature of the device for collecting explosive residues, simply by rubbing the additively manufactured platform on different surfaces in crime scenarios. rPLA (rPLA Gpt (Gpt andor or CB (CB readytouse. readytouse ready use. use ready-to-use Additivelymanufactured Additively AMEs (AMEs commercialconductive GptCBrPLA CBrPLA chargetransfer charge transfer Rct constant k Rct= 104 5 181 3 691 91 6.9 ( 0.58 058 0 58 10 531 31 5.3 0.40 040 40 s1, s1 s 1, 1 s-1 respectively 962 28 362 62 3.6 0.38 038 38 ×103 ×10 ×10- s1. . s-1) FeCN63/4 FeCN634 FeCN Fe CN6 /4 4 CN [Fe(CN6)]3-/4 peaktopeak peak 18 (Gpt-CB-rPLA 24 (CB-rPLA 740 (74 ±1 mV, , mV) treatment 2,4,6trinitrotoluene 246trinitrotoluene trinitrotoluene 2,4,6 2 TNT (TNT 520 20 5-2 5100 100 5-10 L1 L L- CBrPLA, rPLA, collectordetector collector detector simulation Finally treatmentactivation activation treatment/activation residues scenarios 69 9 6. 0.5 05 53 5. 0.4 04 s- 96 36 3. 0.3 03 ×1 FeCN63 FeCN63/ / [Fe(CN6)]3-/ 74 (7 6trinitrotoluene 246 2,4, 52 5- 510 5-1 0. FeCN6 [Fe(CN6)]3- 7 2,4 51 [Fe(CN6)]3 2, [Fe(CN6)] [Fe(CN6) [Fe(CN6 [Fe(CN

ABSTRACT The use of CO2 sensors has been reported as an effective tool in the early detection of signs of deterioration, allowing good accuracy in decision-making about the quality of stored grains. The objective of this study was to quantify the CO2 levels produced by maize grains stored at ambient temperature in a prototype silo, with initial moisture contents of 14, 16 and 18% w.b., and to evaluate the quality of the product over time and the technical breakage. Analyses of moisture content, ash, proteins, lipids, Hue Angle (color), germination and electrical conductivity were performed. Inside the silos, the amount of CO2, relative air humidity and temperature were monitored every hour. Grain quality evaluations were carried out at four storage times (0, 30, 60 and 90 days). A completely randomized design in a 3 × 4 factorial scheme with six replicates was used. Grains with higher moisture contents showed higher technical breakage and losses associated with CO2 emissions. Moisture content, protein, lipids, germination, bulk density, lightness and chroma decreased over time, while the electrical conductivity increased, resulting in greater damage to membranes and loss of quality of maize grains. Monitoring of CO2 in the grain mass is a good tool to assess the quality of grain, and higher initial moisture content caused greater level of CO2 emission and reduction in quality of maize grains. CO deterioration decisionmaking decision making silo 14 1 18 wb w b w.b. ash proteins lipids color, color , (color) performed silos hour 0, 0 (0 30 6 9 days. days . days) used emissions protein density increased w.b (color (

RESUMO O uso de sensores de CO2 tem sido reportado como uma medida eficaz na detecção precoce de sinais de deterioração, permitindo uma boa acurácia na tomada de decisão sobre a qualidade de grãos armazenados. Neste estudo objetivou-se quantificar os níveis de CO2 produzidos por grãos de milho armazenados em temperatura ambiente em silo protótipo, com teores de água iniciais de 14, 16 e 18% b.u., bem como avaliar a qualidade do produto ao longo do tempo e a quebra técnica. Foram realizadas análises de teor de água, cinzas, proteínas, lipídeos, Hue Angle (cor), germinação e condutividade elétrica. No interior dos silos foi monitorada a quantidade de CO2, umidade relativa do ar e temperatura a cada uma hora. As avaliações de qualidade dos grãos ocorreram em quatro tempos de armazenamento (0, 30, 60 e 90 dias). Foi usado o delineamento inteiramente casualizado, em esquema fatorial 3 × 4 e seis repetições. Os grãos mais úmidos apresentaram maior quebra técnica e perdas associadas a emissões de CO2. Os teores de água, proteína, lipídeos, germinação, massa específica aparente, L* e croma reduziram ao longo do tempo, enquanto que a condutividade elétrica aumentou, resultando em maior danificação das membranas e perda de qualidade dos grãos de milho. O monitoramento do CO2 na massa de grãos é uma boa ferramenta para avaliar a qualidade dos grãos, e maior teor de umidade inicial causou maior nível de emissão de CO2 e redução na qualidade dos grãos de milho. CO deterioração objetivouse objetivou se protótipo 14 1 18 bu b u b.u. cinzas proteínas lipídeos cor, cor , (cor) hora 0, 0 (0 30 6 9 dias. dias . dias) casualizado repetições proteína aparente L aumentou b.u (cor (

ABSTRACT Among weed control methods, chemical control using herbicides is one of the most widely employed due to its practicality and efficiency. However, there is still a lack of reliable information regarding the effectiveness of low-volume spraying and the droplet spectrum for contact herbicides, such as fomesafen. The objective was to determine the spray volume and droplet spectrum for applying the fomesafen herbicide and its efficacy in controlling hairy beggarticks (Bidens pilosa) and littlebell (Ipomoea triloba). The herbicide was applied using a CO2-pressurized knapsack sprayer with TT11002 spray tip spaced at 0.50 m, operating at pressures of 100 kPa (very coarse droplets) and 400 kPa (medium-sized droplets) with spray volumes of 35, 70, 140, and 280 L ha-1, obtained by varying the application speed. At the time of application, the percentage of covered area and droplet density (droplets cm-²) were evaluated on water-sensitive paper labels using the DropScope® program. The best control results for hairy beggarticks were achieved when the application was performed with very coarse droplets at a pressure of 100 kPa, with a spray volume between 65 and 280 L ha-1, droplet density exceeding 60 droplets cm-2, and coverage greater than 10%. Fomesafen does not provide effective control of littlebell. methods efficiency However lowvolume low Bidens pilosa Ipomoea triloba. triloba . triloba) CO2pressurized COpressurized CO2 pressurized CO TT TT1100 050 0 50 0.5 m 10 40 mediumsized medium sized 35 70 140 28 ha1, ha1 ha 1, 1 ha-1 speed cm² cm ² cm-² watersensitive water sensitive DropScope program 6 cm2, cm2 2, 2 cm-2 10% TT110 05 5 0. 4 3 7 14 ha- cm- TT11 TT1

RESUMO Dentre os métodos de controle de plantas daninhas, o químico, por meio de herbicidas, é um dos mais utilizados devido à sua praticidade e eficiência. No entanto, ainda faltam informações confiáveis sobre a eficácia de aplicações em baixo volume e o espectro de gotas a ser utilizado para herbicidas de contato, como o fomesafen. O objetivo deste trabalho foi determinar o volume de calda e espectro de gotas para aplicação do herbicida fomesafen, bem como a eficácia no controle de picão-preto (Bidens pilosa) e corda-de-viola (Ipomoea triloba). O herbicida foi aplicado utilizando pulverizador pressurizado por CO2, com pontas TT11002 espaçadas de 0,50 m, operando nas pressões de 100 kPa (gotas muito grossas) e 400 kPa (gotas médias) nos volumes de calda de 35, 70, 140 e 280 L ha-1, obtidos por meio da variação na velocidade de aplicação. No momento da aplicação foram avaliados a porcentagem de área coberta e a densidade de gotas (gotas cm-²) em etiquetas de papel hidrossensível, utilizando o programa DropScope®. Melhores índices de controle do picão-preto são obtidos quando a aplicação foi realizada com gotas muito grossas, na pressão de 100 kPa, com volume de calda entre 65 e 280 L ha-1, densidade de gotas superior a 60 gotas cm-2 e cobertura maior que 10%. O fomesafen não controla a corda-de-viola. daninhas químico eficiência entanto contato picãopreto picão preto Bidens pilosa cordadeviola corda viola Ipomoea triloba. triloba . triloba) CO2 CO TT TT1100 050 0 50 0,5 m 10 grossas 40 médias 35 70 14 28 ha1, ha1 ha 1, 1 ha-1 cm² cm ² cm-² hidrossensível DropScope DropScope® 6 cm2 2 cm- 10% cordadeviola. viola. TT110 05 5 0, 4 3 7 ha- TT11 TT1

ABSTRACT Potassium is one of the most important nutrients for the cotton plant, being an element that participates in many physiological functions. In addition, its adequate availability favors better production performance of the crop. Therefore, the objective of this study was to evaluate the agronomic components in naturally colored cotton cultivars fertilized with potassium doses in the Brazilian semiarid region. For this, two experiments were conducted at Rafael Fernandes Experimental Farm, located in the municipality of Mossoró, RN, from July to November 2019 and July to November 2021. The experimental design was randomized blocks, arranged in split plots, with four repetitions. Potassium doses (0, 60, 120, 180, and 240 kg ha-1 of K2O) were allocated in the plants; and four naturally colored cotton cultivars (BRS Rubi, BRS Safira, BRS Verde, and BRS Topázio) were allocated in the subplots. Colored cotton cultivars respond to potassium fertilization depending on the edaphoclimatic conditions to which they are exposed. BRS Topázio cultivar had higher lint cotton yield and fiber percentage in both growing seasons, highlighting its potential for the region. The dose of 240 kg ha-1 of K2O increased the yield of colored cotton, in second crop cultivation. The cultivars BRS Safira, BRS Rubi, and BRS Verde were not very productive. plant functions addition Therefore region Farm Mossoró RN 201 2021 blocks plots repetitions 0, 0 (0 60 120 180 24 ha1 ha 1 ha- KO K O plants Rubi Safira subplots exposed seasons cultivation productive 20 202 ( 6 12 18 2

RESUMO O potássio é um dos nutrientes mais importantes para o algodoeiro, sendo um elemento que participa de muitas funções fisiológicas na planta. Além disso, sua adequada disponibilidade favorece melhor desempenho produtivo à cultura. Logo, objetivou-se avaliar nesta pesquisa os componentes agronômicos em cultivares de algodão naturalmente colorido adubadas com doses de potássio no Semiárido brasileiro. Para isto, dois experimentos foram conduzidos na Fazenda Experimental Rafael Fernandes, localizada no município de Mossoró, RN, nos períodos de julho a novembro de 2019 e julho a novembro de 2021. O delineamento experimental foi o de blocos casualizados, arranjados em parcelas subdivididas, com quatro repetições. Nas parcelas, foram alocadas as doses de potássio (0, 60, 120, 180 e 240 kg ha-1 de K2O); e, nas subparcelas, as quatro cultivares de algodão naturalmente colorido (BRS Rubi, BRS Safira, BRS Verde e BRS Topázio). As cultivares de algodão colorido respondem à adubação potássica em função das condições edafoclimáticas as quais estão expostas. A cultivar BRS Topázio obteve maior produtividade e porcentagem de fibra nas duas safras de cultivo, destacando o seu potencial para a região. A dose de 240 kg ha-1 de K2O aumentou a produtividade do algodão colorido, em cultivo de segunda safra. As cultivares BRS Safira, BRS Rubi e BRS Verde foram pouco produtivas. algodoeiro planta disso cultura Logo objetivouse objetivou se brasileiro isto Fernandes Mossoró RN 201 2021 casualizados subdivididas repetições 0, 0 (0 60 120 18 24 ha1 ha 1 ha- KO K K2O) subparcelas Safira Topázio. . Topázio) expostas região safra produtivas 20 202 ( 6 12 2

Resumo Introdução: O papel da tomografia computorizada torácica de ultrabaixa dose (ULDCT) em contexto de urgência é desconhecido. Objetivo: Este estudo avaliou a viabilidade da ULDCT em adultos na urgência com suspeita de pneumonia. Foram medidos a dose de radiação, o tempo entre a solicitação e os relatórios do exame, prescrições de antimicrobianos também foram correlacionadas. Métodos: Este estudo avaliou a viabilidade da ULDCT em adultos na urgência com suspeita de pneumonia. Foram medidas a dose de radiação, o tempo entre a solicitação e a disponibilização dos relatórios do exame, e também foram correlacionadas as prescrições de antimicrobianos. Entre outubro de 2017 e dezembro de 2018, incluímos prospectivamente adultos com suspeita de pneumonia adquirida na comunidade, sem diagnóstico definitivo por avaliação clínica. Os critérios de exclusão abrangeram condições clínicas que pudessem afetar a interpretação da imagem. Resultados: Foram incluídos 131 pacientes elegíveis (idade média de 43,5 anos; 57% homens) encaminhados para ULDCT. Dezoito (13,7%) foram excluídos. A dose média de radiação da ULDCT foi de 0,14 mSv. O intervalo de tempo entre a solicitação médica e o resultado da ULDCT foi de 43 minutos. Conclusão: A ULDCT mostrou-se viável para pacientes adultos com suspeita de pneumonia em contexto de urgência. Os relatórios foram disponibilizados num intervalo razoável e os resultados negativos foram associados a uma baixa taxa de prescrição de antibióticos.

Abstract Background: The role of ultra-low-dose chest CT (ULDCT) in the emergency department is unknown. Purpose: This study sought to examine feasibility of ULDCT in adults presenting to the emergency department for whom pneumonia was suspected. Radiation dose and time interval between medical request and ULDCT results were measured, antibiotic prescriptions were correlated. Methods: Between October 2017 and December 2018, we prospectively enrolled consecutive healthy adult patients in a single-center for whom community-acquired pneumonia was suspected and for whom no definitive diagnosis was possible by clinical judgment. Exclusion criteria comprised all chronic conditions that could impact severity and interpretation of image. Results: 131 eligible patients (mean age 43.5 years; 57% men) were enrolled to ULDCT. Eighteen (13.7%) patients were excluded. Average CT radiation dose was 0.14 mSv. Time interval between medical request and ultra-low-dose chest CT result was 43 minutes. Only 15.9% of patients with negative CT received antibiotics. Conclusion: Ultra-low-dose chest CT was feasible for almost all patients in a group of healthy adults presenting to the emergency department with suspected community-acquired pneumonia. Results were made available in a reasonable interval, and negative ones were associated with a low antibiotic prescription rate.

ABSTRACT The common climatic characteristics in semi-arid regions can cause abiotic stress and be a limiting factor for crops. Under these conditions, the use of beneficial elements such as selenium (Se) is an alternative to mitigate the harmful effects of abiotic stresses and increase yield. Therefore, this research aimed to evaluate the agronomic performance of onion grown in a semi-arid region under the application of Se. A field experiment was performed in a randomized block design, where five doses of Se (0, 15, 30, 45, and 60 g ha-1), by foliar application, were tested on two onion hybrids (Andrômeda and Rio das Antas). Growth, nutritional and yield variables were analyzed. Se increased the height and accumulation of dry mass in onion plants, with a maximum at the 60 g ha-1 dose of Se, the same dose at which the highest commercial (78.15 t ha-1) and total (86.03 t ha-1) bulb yields were obtained in Rio das Antas; however, for Andrômeda, there was no effect of Se on yield. Applied Se doses also increased the content of this element in the bulbs. Despite increasing bulb yields only in the Rio das Antas hybrid, 60 g ha-1 of Se is recommended for onions due to its effects on plant growth and the biofortification of bulbs with Se. semiarid semi arid crops conditions (Se Therefore design 0, 0 (0 15 30 45 6 ha1, ha1 ha 1 , Andrômeda Antas. . Antas) Growth analyzed plants ha- 78.15 7815 78 (78.1 86.03 8603 86 03 (86.0 however hybrid ( 3 4 78.1 781 7 (78. 86.0 860 8 (86. 78. (78 86. (86 (7 (8

RESUMO As características climáticas comuns em regiões semiáridas podem causar estresse abiótico e ser um fator limitante ao cultivo agrícola. Nessas condições, o uso de elementos benéficos como o selênio (Se) é uma alternativa para mitigar os efeitos deletérios dos estresses abióticos e aumentar a produtividade. Portanto, esta pesquisa teve como objetivo avaliar o desempenho agronômico da cebola cultivada em região semiárida sob aplicação de Se. Foi conduzido um experimento de campo, delineado em blocos casualizados completos, onde foram testadas cinco doses de Se (0, 15, 30, 45 e 60 g ha-1), por aplicação foliar, em dois híbridos de cebola (Andrômeda e Rio das Antas). Foram analisadas variáveis de crescimento, nutricional e produtividade. O Se aumentou a altura e o acúmulo de massa seca em plantas de cebola, com máxima na dose 60 g ha-1 de Se, mesma dose em que foi obtida a maior produtividade comercial (78,15 t ha-1) e total (86,03 t ha-1) de bulbos em Rio das Antas, todavia, para Andrômeda, não ocorreu efeito do Se sobre a produtividade. As doses de Se também aumentaram o teor desse elemento nos bulbos. Apesar de aumentar a produtividade de bulbos apenas em Rio das Antas, recomenda-se a aplicação de 60 g ha-1 de Se em cebola devido aos efeitos no crescimento da planta e na biofortificação dos bulbos com Se. agrícola condições (Se Portanto campo completos 0, 0 (0 15 30 4 6 ha1, ha1 ha 1 , foliar Andrômeda Antas. Antas . Antas) ha- 78,15 7815 78 (78,1 86,03 8603 86 03 (86,0 todavia recomendase recomenda se ( 3 78,1 781 7 (78, 86,0 860 8 (86, 78, (78 86, (86 (7 (8