Resumo Este estudo objetivou investigar o efeito do desgaste e envelhecimento (estímulos combinados) na resistência à fadiga, topografia superficial e transformação de fase de uma cerâmica Y-TZP. Discos para teste de flexão biaxial foram confeccionados segundo as normas da ISO-6872:2008 (15 mm Ø; 1,2 mm espessura) e randomicamente distribuídos de acordo com os fatores “desgaste” e “envelhecimento”: C- controle (sinterizado); CA- controle envelhecido; G- desgaste; GA- desgaste envelhecido. O desgaste foi feito com pontas diamantadas de granulação grossa sob irrigação com água. Os protocolos de envelhecimento consistiram em: autoclave (134°C, 2 bar de pressão, 20 horas), 365 dias armazenados em temperatura ambiente, e ciclagem mecânica (106 ciclos a 20 Hz em um intervalo de carga de até 50% da carga monotônica observada em testes estáticos). A resistência à fadiga foi determinada para 20.000 ciclos à 6 Hz sob carregamento sinusoidal através do método de escada. Adicionalmente, análises de topografia superficial em microscopia eletrônica de varredura e de transformação de fase por difração de raios-X foram executadas. A metodologia de Dixon e Mood foi usada para analisar os dados de resistência à fadiga. Foi observado que o desgaste promove uma alteração de padrão topográfico superficial; enquanto o envelhecimento aparentemente não demonstra influência. Em relação à transformação de fase e resistência à fadiga, o desgaste desencadeou um aumento de fase m sem impactar na resistência à fadiga da cerâmica Y-TZP; já o envelhecimento promoveu uma intensa transformação de fase, resultando no mecanismo de tenacificação, que gerou um aumento na resistência à fadiga para a condição sinterizada e uma tendência a aumento na condição desgaste (C < CA; G = GA). Os dados elucidam que o desgaste e o envelhecimento não impactaram negativamente na resistência à fadiga da cerâmica Y-TZP, apesar de promoverem alterações de topografia superficial e intensa transformação de fase de t-m respectivamente.

Abstract This study aimed to investigate the effect of grinding and multi-stimuli aging on the fatigue strength, surface topography and the phase transformation of Y-TZP ceramic. Discs were manufactured according to ISO-6872:2008 for biaxial flexure testing (diameter: 15 mm; thickness: 1.2 mm) and randomly assigned considering two factors “grinding” and “aging”: C- control (as-sintered); CA- control + aging; G- ground; GA- ground + aging. Grinding was carried out with coarse diamond burs under water-cooling. Aging protocols consisted of: autoclave (134°C, 2 bars pressure, 20 hours), followed by storage for 365 days (samples were kept untouched at room temperature), and by mechanical cycling (106 cycles by 20 Hz under a load of 50% from the biaxial flexure monotonic tests). Flexural fatigue strengths (20,000 cycles; 6 Hz) were determined under sinusoidal cyclic loading using staircase approach. Additionally, surface topography analysis by FE-SEM and phase transformation analysis by X-ray Diffractometry were performed. Dixon and Mood methodology was used to analyze the fatigue strength data. Grinding promotes alterations of topographical pattern, while aging apparently did not alter it. Grinding triggered t-m phase transformation without impacting the fatigue strength of the Y-TZP ceramic; and aging promoted an intense t-m transformation that resulted in a toughening mechanism leading to higher fatigue strength for as-sintered condition, and a tendency of increase for ground condition (C < CA; G = GA). It concludes that grinding and aging procedures did not affect deleteriously the fatigue strength of the evaluated Y-TZP ceramic, although, it promotes surface topography alterations, except to aging, and t-m phase transformation.

Abstract This study aimed to investigate slow crack growth (SCG) behavior of a zirconia ceramic after grinding and simulated aging with low-temperature degradation (LTD). Complementary analysis of hardness, surface topography, crystalline phase transformation, and roughness were also measured. Disc-shaped specimens (15 mm Ø × 1.2 mm thick, n = 42) of a full-contour Y-TZP ceramic (Zirlux FC, Amherst) were manufactured according to ISO:6872-2008, and then divided into: Ctrl – as-sintered condition; Ctrl LTD – as-sintered after aging in autoclave (134°C, 2 bar, 20 h); G – ground with coarse diamond bur (grit size 181 μm); G LTD – ground and aged. The SCG parameters were measured by a dynamic biaxial flexural test, which determines the tensile stress versus stress rate under four different rates: 100, 10, 1 and 0.1 MPa/s. LTD led to m-phase content increase, as well as grinding (m-phase content: Ctrl – 0%; G – 12.3%; G LTD – 59.9%; Ctrl LTD – 81%). Surface topography and roughness analyses showed that grinding created an irregular surface (increased roughness) and aging did not promote any relevant surface change. There was no statistical difference on surface hardness among different conditions. The control group presented the lowest strength values in all tested rates. Regarding SCG, ground conditions were less susceptible to SCG, delaying its occurrence. Aging (LTD) caused an increase in SCG susceptibility for the as-sintered condition (i.e. G < G LTD < Ctrl < Ctrl LTD).

OBJETIVOS: Relatar nossa experiência de 14 meses, comparando o uso do laser 980 nm com fibra axial com o laser 1.470 nm com fibra radial. MÉTODOS: Foram revisados prontuários de 215 pacientes e comparados resultados de utilização do laser diodo 980 nm com fibra axial e laser diodo 1.470 nm com fibra radial, com e sem infiltração intumescente, respectivamente , analisando porcentagem de oclusão das safenas e complicações. RESULTADOS: Foram tratadas 294 pernas de 215 pacientes. Desse total, 141 casos (65,6%) (192 membros) foram submetidos ao tratamento com laser 980, e 74 casos (34,4%) (102 membros), com o 1.470. Houve ablação completa, com fechamento de 100% em 138 (97,9%) casos para o laser 980 e em 73 (98,6%) casos para o 1.470 (p = 0,999). Houve persistência de dor pós-operatória, necessitando analgésicos num período superior a 7 dias, em 4,3% dos pacientes (seis casos) tratados com o laser 980 e em 5,4% (quatro casos) tratados com 1.470 (p = 0,740). Não houve nenhum caso de hipercromia, trombose venosa profunda ou tromboembolismo pulmonar. Parestesias no trajeto da safena ocorreram em 2,17% dos pacientes tratados com o laser 980 e em 4% dos tratados com o 1.470. CONCLUSÃO: Nossa experiência inicial mostra uma boa efetividade quanto ao fechamento das safenas com laser, poucas complicações pós-operatórias, sendo encontrados resultados semelhantes com ambos os tipos de laser.

OBJECTIVE: To report our 14-month experience comparing the use of 980 nm laser with axial fiber with 1,470 nm laser with radial fiber. METHODS: Charts from 215 patients were reviewed in order to compare the results of the use of 980 nm diode laser with axial fiber and 1,470 nm diode laser with radial fiber, with and without intumescent infiltration respectively, analyzing the percentage of saphenous vein occlusion and complications. RESULTS: A total of 294 legs of 215 patients were treated. Among them, 141 cases (65.6%) (192 limbs) underwent treatment with 980 laser, and 74 (34.4%) (102 limbs) with 1,470 laser. There was complete ablation, with 100% closing, in 138 (97.9%) cases for 980 laser and 73 (98.6%) cases for 1,470 laser (p = 0.999). Persistent postoperative pain requiring analgesics for more than 7 days was reported in 4.3% of patients (six cases) treated with laser 980 and in 5.4% (four cases) treated with 1,470 laser (p = 0.740). There were no cases of hyperchromia, deep venous thrombosis or pulmonary thromboembolism. Paresthesias in the pathway of the saphenous vein occurred in 2.17% of the patients treated with 980 laser and in 4% of those treated with 1,470 laser. CONCLUSION: Our initial experience shows good effectiveness in closing saphenous veins with laser and few postoperative complications, with similar results for both types of laser.