This work evaluated the use of corncob as a support for the immobilization of an extracellular fructosyltransferase (E.C. 2.4.1.9) from Aspergillus oryzae IPT-301, aiming at the synthesis of a stable biocatalyst for the production of fructooligosaccharides. The transfructosylation activity of the immobilized enzyme was maximized via experimental design. Additionally, the biochemical properties and stability of the immobilized enzyme, as well as the reaction kinetics, were determined. The enzyme immobilized on alkali-treated corncob showed the highest transfructosylation activity at 50 °C and pH 5.5. It also presented a wide pH stability and a half-life around 1.4 times greater than the soluble enzyme. Furthermore, the immobilized enzyme showed 53% of retention of catalytic activity in a second consecutive reaction cycle, showing the potential for reuse. These results suggest that alkali-treated corncob is a promising support material for the synthesis of heterogeneous biocatalysts aiming at fructooligosaccharide production, which can contribute to the valorization of this abundant agro-waste. E.C. EC E C (E.C 2.4.1.9 2419 2 4 1 9 IPT301, IPT301 IPT 301, 301 IPT-301 fructooligosaccharides design Additionally kinetics determined alkalitreated alkali treated 5 55 5.5 halflife half life 14 1. Furthermore 53 cycle reuse agrowaste. agrowaste agro waste. waste agro-waste E.C 2.4.1. 241 IPT30 30 IPT-30 5. 2.4.1 24 IPT3 3 IPT-3 2.4. IPT- 2.4 2.

Serial numbers are marks present on several day-to-day objects, created by manufacturers for purposes such as quality control, product tracking and to prevent counterfeiting. In the case of firearms, these characters can be obliterated or damaged by natural processes or intentionally by criminals to prevent positive identification of stolen property. One non-destructive method employed by crime laboratories for the restoration of obliterated characters is the magnetic particle method. The present work aims to study the synthesis and application of waste-made magnetic nanoparticles in the recovery of adulterated markings. A set of analytical-grade materials and metallic waste magnetic nanoparticles were synthesized for comparison purposes. Chemical characterization tests by X-ray fluorescence, morphological tests by scanning electron microscopy (SEM), and magnetization tests by vibrating sample magnetometer (VSM) were performed. The efficacy of the synthesized nanoparticles was tested on 1020 steel plates previously engraved and adulterated by sanding. Both homemade magnetic nanoparticles demonstrated superior performance compared to commercial magnetic particles. The application of homemade magnetic particles, especially using waste as the source of production, decreases the cost of the material and is environmentally friendly. The development of this material makes magnetic serial number restoration a better option for widespread use in forensic procedures. daytoday day objects control counterfeiting firearms property nondestructive non destructive wastemade made markings analyticalgrade analytical grade Xray X ray fluorescence SEM, SEM , (SEM) VSM (VSM performed 102 sanding particles production friendly procedures (SEM 10 1

Resumo Nas últimas décadas, uma epidemia de doença renal crônica (DRC) tem sido associada a fatores ambientais e ocupacionais (estresse térmico decorrente de cargas de trabalho elevadas em altas temperaturas e exposição a produtos químicos, como agrotóxicos e metais), denominada DRC de origem não tradicional (DRCnt). Esta revisão descritiva tem como objetivo apresentar evidências recentes sobre estresse térmico, agrotóxicos e metais como possíveis causas de DRCnt e fornecer uma visão geral das estratégias brasileiras de regulamentação, fiscalização e vigilância sanitária relacionadas. Os trabalhadores brasileiros são comumente expostos a condições extremas de calor e outros fatores de risco de DRCnt, incluindo o aumento da exposição a agrotóxicos e metais. Além disso, há uma falta de regulamentação e fiscalização, políticas públicas e estratégias adequadas para proteger a saúde renal dos trabalhadores em relação aos principais fatores de risco. É provável que a DRCnt seja uma causa significativa de DRC no Brasil, uma vez que a etiologia da doença é desconhecida em muitos pacientes e diversas condições para seu desenvolvimento estão presentes no país. Estudos epidemiológicos devem ser realizados para explorar associações causais e estimar o impacto do calor, dos agrotóxicos e dos metais na DRCnt no Brasil. Além disso, as políticas públicas devem priorizar a redução da exposição dos trabalhadores e a promoção de sua saúde e segurança. décadas (DRC químicos metais, , metais) DRCnt. . (DRCnt) relacionadas disso Brasil país segurança (DRCnt

Abstract In the past decades, an epidemic of chronic kidney disease (CKD) has been associated with environmental and occupational factors (heat stress from high workloads in hot temperatures and exposure to chemicals, such as pesticides and metals), which has been termed CKD of non-traditional origin (CKDnt). This descriptive review aims to present recent evidence about heat stress, pesticides, and metals as possible causes of CKDnt and provide an overview of the related Brazilian regulation, enforcement, and health surveillance strategies. Brazilian workers are commonly exposed to extreme heat conditions and other CKDnt risk factors, including increasing exposure to pesticides and metals. Furthermore, there is a lack of adequate regulation (and enforcement), public policies, and strategies to protect the kidney health of workers, considering the main risk factors. CKDnt is likely to be a significant cause of CKD in Brazil, since CKD’s etiology is unknown in many patients and several conditions for its development are present in the country. Further epidemiological studies may be conducted to explore causal associations and estimate the impact of heat, pesticides, and metals on CKDnt in Brazil. Moreover, public policies should prioritize reducing workers´ exposure and promoting their health and safety. decades (CKD chemicals metals, , metals) nontraditional non traditional CKDnt. . (CKDnt) enforcement Furthermore enforcement) Brazil CKDs s country Moreover safety (CKDnt

Abstract Objective: To investigate the effectiveness of linezolid and vancomycin for the treatment of nosocomial infections in children under 12 years old. Data sources: This is a systematic review in which five randomized clinical trials about the effectiveness of linezolid and vancomycin, involving a total of 429 children with nosocomial infections, were evaluated. They were searched in scientific databases: PubMed, Bvs, and SciELO. Summary of findings: The main nosocomial infections that affected children were bacteremia, skin, and soft tissue infections followed by nosocomial pneumonia. Most infections were caused by Gram-positive bacteria, which all studies showed infections caused by Staphylococcus aureus, with methicillin-resistant S. aureus (MRSA) and methicillin-resistant coagulase-negative staphylococci strains being isolated. Both linezolid and vancomycin showed high therapeutic efficacy against different types of nosocomial infections, ranging from 84.4% to 94% for linezolid and 76.9% to 90% for vancomycin. Patients receiving linezolid had lower rates of rash and red man syndrome compared to those receiving vancomycin. However, despite the adverse reactions, antimicrobials can be safely administered to children to treat nosocomial infections caused by resistant Gram-positive bacteria. Conclusion: Both linezolid and vancomycin showed good efficacy in the treatment of bacterial infections caused by resistant Gram-positive bacteria in hospitalized children. However, linezolid stands out regarding its pharmacological safety. Importantly, to strengthen this conclusion, further clinical trials are needed to provide additional evidence. Objective 1 old sources 42 evaluated databases PubMed Bvs SciELO findings bacteremia skin pneumonia Grampositive Gram positive methicillinresistant methicillin S MRSA (MRSA coagulasenegative coagulase negative isolated 844 84 4 84.4 94 769 76 9 76.9 90 However reactions Conclusion safety Importantly conclusion evidence 8 84. 7 76.

RESUMO Diversas tecnologias vêm sendo implementadas para melhorar o desempenho das plantas em cultivos irrigados e uma delas é o uso de nanobioestimulantes. Assim, o objetivo deste estudo foi investigar os efeitos da aplicação de diferentes concentrações de bioestimulante à base de carbono na morfofisiologia de plantas de feijão-caupi submetidas a diferentes condutividades elétricas da água de irrigação. O experimento foi realizado em delineamento inteiramente casualizado, em arranjo fatorial 2 × 6, com duas condutividades elétricas da água de irrigação (CEa: 0,35 e 4,0 dS m-1) e seis concentrações do nanobioestimulante aplicadas via foliar (0, 80, 160, 240, 320 e 400 mg L-1), com quatro repetições. Variáveis de crescimento e de trocas gasosas foram avaliadas 31 dias após a semeadura (estádio V9). Concentrações entre 240 e 320 mg L-1 do nanobioestimulante de carbono proporcionaram maiores incrementos no crescimento e nas variáveis fisiológicas, no entanto, causaram decréscimos no quenching não-fotoquímico. A condutividade elétrica da água de 4,0 dS m-1 reduziu número de folhas (17,1%), diâmetro do caule (10,0%), índice SPAD (10,3%), fotossíntese líquida (10,9%), condutância estomática (46,4%), transpiração (34,5%), eficiência instantânea de carboxilação (22,4%), quenching fotoquímico (4,5%); em contraste, aumentou razão entre concentração interna e ambiente de CO2 (18,0%), temperatura foliar (2,9%), eficiência do uso da água (32,5%) e quenching não-fotoquímico (12,4%). As concentrações de 240 a 320 mg L-1 do nanobioestimulante potencializam o desenvolvimento e as trocas gasosas do feijão-caupi em condições sem estresse, enquanto que a concentração de 240 mg L-1 promove aumento máximo de altura de plantas sob salinidade. nanobioestimulantes Assim feijãocaupi feijão caupi casualizado 6 CEa (CEa 035 0 35 0,3 40 4 4, m1 m 1 0, (0 80 160 32 L1, L1 L , L-1) repetições 3 estádio V9. V9 V . V9) 24 L- fisiológicas entanto nãofotoquímico. nãofotoquímico não fotoquímico. m- 17,1%, 171 17,1% 17 (17,1%) 10,0%, 100 10,0% 10 (10,0%) 10,3%, 103 10,3% (10,3%) 10,9%, 109 10,9% 9 (10,9%) 46,4%, 464 46,4% 46 (46,4%) 34,5%, 345 34,5% 34 5 (34,5%) 22,4%, 224 22,4% 22 (22,4%) 4,5% 45 (4,5%) contraste CO 18,0%, 180 18,0% 18 (18,0%) 2,9%, 29 2,9% (2,9%) 32,5% 325 (32,5% 12,4%. 124 12,4% 12 (12,4%) estresse salinidade 03 ( 8 16 17,1 (17,1% 10,0 (10,0% 10,3 (10,3% 10,9 (10,9% 46,4 (46,4% 34,5 (34,5% 22,4 (22,4% 4,5 (4,5% 18,0 (18,0% 2,9 (2,9% 32,5 (32,5 12,4 (12,4% 17, (17,1 10, (10,0 (10,3 (10,9 46, (46,4 34, (34,5 22, (22,4 (4,5 18, (18,0 2, (2,9 32, (32, 12, (12,4 (17, (10, (46, (34, (22, (4, (18, (2, (32 (12, (17 (10 (46 (34 (22 (4 (18 (2 (3 (12 (1

ABSTRACT Several technologies have been implemented to improve plant performance in irrigated crops, and one of them is the use of nanobiostimulants. Therefore, the aim of the present study was to explore the effects of applying different concentrations of a carbon-based biostimulant on the morphophysiology of cowpea plants subjected to varying electrical conductivities of irrigation water. The experiment was performed in a completely randomized design, in a 2 × 6 factorial scheme, with two electrical conductivities of irrigation water (ECw: 0.35 and 4.0 dS m-1) and six concentrations of nanobiostimulant applied through the leaves (0, 80, 160, 240, 320, and 400 mg L-1), with four replications. Growth and gas exchange variables were evaluated 31 days after sowing (V9 stage). Concentrations between 240 and 320 mg L-1 of carbon-based nanobiostimulant promoted greater increases in growth and physiological variables, but they caused decreases in non-photochemical quenching. Water electrical conductivity of 4.0 dS m-1 reduced the number of leaves (17.1%), stem diameter (10.0%), SPAD index (10.3%), net photosynthesis (10.9%), stomatal conductance (46.4%), transpiration (34.5%), instantaneous carboxylation efficiency (22.4%), and photochemical quenching (4.5%); in contrast, it increased the ratio between internal and ambient CO2 concentration (18.0%), leaf temperature (2.9%), water use efficiency (32.5%), and non-photochemical quenching (12.4%). Concentrations of 240 to 320 mg L-1 of the nanobiostimulant enhance the development and gas exchange of cowpea plants under non-stress conditions, whereas the concentration of 240 mg L-1 promotes the maximum increase in plant height under salinity. crops nanobiostimulants Therefore carbonbased carbon based design scheme ECw (ECw 035 0 35 0.3 40 4 4. m1 m 1 0, (0 80 160 L1, L1 L , L-1) replications 3 V9 V (V stage. stage . stage) 24 32 L- nonphotochemical non m- 17.1%, 171 17.1% 17 (17.1%) 10.0%, 100 10.0% 10 (10.0%) 10.3%, 103 10.3% (10.3%) 10.9%, 109 10.9% 9 (10.9%) 46.4%, 464 46.4% 46 (46.4%) 34.5%, 345 34.5% 34 5 (34.5%) 22.4%, 224 22.4% 22 (22.4%) 4.5% 45 (4.5%) contrast CO 18.0%, 180 18.0% 18 (18.0%) 2.9%, 29 2.9% (2.9%) 32.5%, 325 32.5% (32.5%) 12.4%. 124 12.4% 12 (12.4%) nonstress stress conditions salinity 03 0. ( 8 16 17.1 (17.1% 10.0 (10.0% 10.3 (10.3% 10.9 (10.9% 46.4 (46.4% 34.5 (34.5% 22.4 (22.4% 4.5 (4.5% 18.0 (18.0% 2.9 (2.9% 32.5 (32.5% 12.4 (12.4% 17. (17.1 10. (10.0 (10.3 (10.9 46. (46.4 34. (34.5 22. (22.4 (4.5 18. (18.0 2. (2.9 32. (32.5 12. (12.4 (17. (10. (46. (34. (22. (4. (18. (2. (32. (12. (17 (10 (46 (34 (22 (4 (18 (2 (32 (12 (1 (3

Cancer is one of the major causes of death worldwide, and breast cancer is the most prevalent and deadly type among women. Despite the side effects and the phenomena of chemoresistance associated with the drugs involved, chemotherapy remains the main therapeutic strategy to combat and control breast cancer. Therefore, several new classes of compounds against breast cancer have been explored, in an effort to identify new drug candidates with alternative mechanisms of action. The principal results of such exploration, focusing on caged xanthones, thiosemicarbazones and photosensitizers, are presented in this review, along with the main aspects of the drug discovery process against breast cancer. More specifically, the design, structure-activity relationship investigations and anti-breast cancer properties of these three classes are described and discussed in this work. worldwide women involved Therefore explored action exploration xanthones photosensitizers review specifically design structureactivity structure activity antibreast anti work

ABSTRACT BACKGROUND: Nutritional status and growth curves can affect cognitive development, increase the risk of infection, and contribute to the development of chronic diseases. Its etiology is related to food, socioeconomic, and maternal conditions. However, to date, no data on these parameters exist in the state of Goiás, Brazil. OBJECTIVE: To compare the nutritional status and growth curves of children and adolescents in the city of Goiânia, Goiás, Brazil. DESIGN AND SETTING: This was a cross-sectional study. A total of 529 individuals were recruited from a primary health center in the municipality. METHODS: To assess nutritional status, the sample was divided into three categories: 3–4, 5–10, and 11–19 years, with z-score classification considering body mass index for age. The classification of growth curves was performed considering the median height values for age, assuming two references: (a) young Brazilian population and (b) one recommended for international use. The independent sample T-test was used to compare anthropometric variables. RESULTS: The results showed that the classification of eutrophics represents a predominant percentage between both sexes (men: 03–04 = 55.4%; 05–10 = 57.6%; 11–19 = 53.5 % and women: 03–04 = 53.5%; 05–10 = 63.9%; 11–19 = 56.9%), and growth curves showed differences in specific periods in both sexes. CONCLUSIONS: It can be concluded that children and adolescents from the city of Goiânia present as predominance the eutrophic nutritional status, followed by the risk of overweight, underweight, obesity, and malnutrition of both sexes. BACKGROUND infection diseases food socioeconomic conditions However date Goiás Brazil OBJECTIVE SETTING crosssectional cross sectional study 52 municipality METHODS categories 34 3 4 3–4 510 5 10 5–10 1119 11 19 11–1 years zscore z score age references (a b (b use Ttest T test variables RESULTS men (men 0304 03 04 03–0 55.4% 554 55 0510 05 05–1 57.6% 576 57 6 535 53 53. women 53.5% 63.9% 639 63 9 56.9%, 569 56.9% , 56 56.9%) CONCLUSIONS overweight underweight obesity 3– 51 1 5–1 111 11– 030 0 03– 55.4 051 05– 57.6 63.9 56.9 5– 55. 57. 63. 56.

A new composite based on acetylene black (AB) and vegetable derivative polyurethane (PU) was prepared and evaluated in the determination of bisphenol A (BPA) in water samples using a differential pulse voltammetric procedure (DPV). DPV pulse amplitude of 50 mV, 10 mV s-1 scan rate and 0.10 mol L-1 phosphate buffer were selected for the analytical studies. An analytical curve was obtained with linear range of 0.1-10 µmol L-1 BPA and a limit of detection of 14.1 nmol L-1. The proposed electrode was used without modifiers and with high sensitivity and low-cost preparation in the determination of BPA in both tap and artesian well waters spiked with 0.30 µmol L-1, with relative errors of 0.81 and 1.0% and recoveries of 102 and 105%, respectively. Interferences from oxytetracycline, furosemide, catechol, methyl viologen chloride and fenitrothion could be overcome by appropriate current measuring, while diclofenac did not interfere. AB (AB PU (PU (BPA DPV. . (DPV) 5 1 s1 s s- 010 0 0.1 L1 L L- studies 0.110 0110 0.1-1 141 14 14. L1. 1. lowcost low cost 030 30 0.3 L1, 1, 081 81 0.8 1.0 105 105% respectively oxytetracycline furosemide catechol measuring interfere (DPV 01 0. 110 0.11 011 0.1- 03 3 08 8 11

A metallic surface can exhibit low wettability through the formation of a rough structure with micro/nanometric dimensions combined with a surface energy-reducing agent. When the contact and sliding angles are ≥ 150° and ≤ 10°, respectively, the surface is classified as superhydrophobic (SHS). The study aimed to electrodeposit a microstructure with micronanometric roughness of nickel, stearic acid (Al/Ni-SA), and nickel, stearic acid with multi-layered carbon nanotubes (Al/Ni-SA-MWCNT) on aeronautical aluminum 7050. The obtained contact angles were close to 160°, and sliding angles were less than 1°, characterizing the superhydrophobic and self-cleaning nature. Freezing tests were conducted, and the deposit with MWCNT showed longer freezing times at -22°C. The Al/Ni-SA-MWCNT condition also exhibited the best corrosion resistance with corrosion current superior by two orders of magnitude compared to the Al/Ni-Sa condition. The coatings demonstrated impressive performance, achieving corrosion inhibition efficiencies close to 100%. micro nanometric energyreducing energy reducing agent 150 10 10° respectively SHS. SHS . (SHS) nickel Al/NiSA, AlNiSA Al/Ni SA , Al Ni (Al/Ni-SA) multilayered multi layered Al/NiSAMWCNT AlNiSAMWCNT (Al/Ni-SA-MWCNT 7050 160 160° 1 1° selfcleaning self cleaning nature conducted 22°C. 22C C 22 -22°C Al/NiSa AlNiSa Sa performance 100 100% 15 (SHS NiSA Al/NiSA AlNi (Al/Ni-SA NiSAMWCNT 705 16 22°C 2 NiSa 70 7

ABSTRACT Congenital heart disease (CHD) affects eight to ten out of every 1,000 births, resulting in approximately 23,057 new cases in Brazil in 2022. About one in four children with CHD requires surgery or other procedures in the first year of life, and it is expected that approximately 81% of these children with CHD will survive until at least 35 years of age. Professionals choosing to specialize in CHD surgery face numerous challenges, not only related to mastering surgical techniques and the complexity of the diseases but also to the lack of recognition by medical societies as a separate subspecialty. Furthermore, families face difficulties when access to services capable of providing treatment for these children. To address these challenges, it is essential to have specialized hospitals, qualified professionals, updated technologies, sustainable industry, appropriate financing, quality assessment systems, and knowledge generation. The path to excellence involves specialization across all involved parties. As we reflect on the importance of Pediatric Cardiovascular Surgery and Congenital Heart Diseases establishing themselves as a subspecialty of Cardiovascular Surgery, it is essential to look beyond our borders to countries like the United States of America and United Kingdom, where this evolution is already a reality. This autonomy has led to significant advancements in research, education, and patient care outcomes, establishing a care model. By following this path in Brazil, we not only align our practice with the highest international standards but also demonstrate our maturity and the ability to meet the specific needs of patients with CHD and those with acquired childhood heart disease. (CHD 1000 1 000 1,00 births 23057 23 057 23,05 2022 life 81 3 age challenges Furthermore hospitals professionals technologies industry financing systems generation parties Kingdom reality research education outcomes model 100 00 1,0 2305 2 05 23,0 202 8 10 0 1, 230 23, 20

In this work, the support, cashew apple bagasse (CAB), was chemically modified with divinyl sulfone (DVS), and it was evaluated to immobilize Candida antarctica lipase A (CAL-A). The best activation conditions of CAB support were defined by an advanced experimental design using the Taguchi method, assessing five factors at four levels (concentration of DVS, ionic strength, pH, temperature, and time). The support and biocatalyst (CAB-DVS-CAL-A) were characterized by Fourier transform infrared spectroscopy (FTIR), elemental analysis, thermogravimetry (TGA), scanning microscopy (SEM), fluorescence spectroscopy (XRF) and electrophoresis. The optimal conditions to activate the support were DVS concentration of 1.4 mol L-1 (3 mL of DVS in 20 mL of reaction volume), a concentration of sodium bicarbonate buffer at 5 mmol L-1, pH 3.0 at 30 °C for 12 h. The immobilization on CAB-DVS promoted increased thermal stability at 70 °C and different pHs of CAL-A. Therefore, the selected conditions allowed for a catalyst with a catalytic activity of 6.8 U g-1 and more stable than the free enzyme (CAL-A). This demonstrates that pretreated and DVS-activated CAB is a promising support for enzyme immobilization. work CAB, , (CAB) (DVS) CALA. CALA CAL . (CAL-A) method strength temperature time. time time) CABDVSCALA (CAB-DVS-CAL-A FTIR, FTIR (FTIR) analysis TGA, TGA (TGA) SEM, SEM (SEM) XRF (XRF electrophoresis 14 1 4 1. L1 L L- 3 ( 2 volume, volume volume) L1, 1, 0 3. C h CABDVS 7 A. CAL-A Therefore 68 6 8 6. g1 g g- DVSactivated activated (CAB (DVS (CAL-A (FTIR (TGA (SEM

This work produced chemically activated sugarcane bagasse-based activated carbon (AC) for the controlled release of urea. Fourier transform infrared (FTIR) and Raman analysis confirmed the presence of graphitic structures and multiple oxygen-containing functional groups. After the solid-state reaction that formed the material, their surface area reached 1401 m2 g-1 for the sample prepared with a pyrolysis temperature of 400 °C, a concentration of sodium hydroxide equivalent to 11 mol L-1, and an activation temperature of 900 °C (AC 400-11-900). Zeta potential measures indicated negative charges at pH > 4, reaching almost (–50 mV) at pH 9. The adsorptive capacity of the AC with the highest surface area was equal to (758.7 ± 263.8) mg g-1. Nevertheless, the matrix did not release the urea molecules previously adsorbed into it, which is appealing for fertilizer-releasing purposes because the activated carbon would be able to re-adsorb the non-absorbed urea molecules, sustaining nutrient availability for longer periods. bagassebased bagasse based FTIR (FTIR oxygencontaining oxygen containing groups solidstate solid state material 140 m g1 g 1 g- 40 C L1, L1 L 1, L-1 90 40011900. 40011900 . 400-11-900) 4 –50 50 (–5 mV 9 758.7 7587 758 7 (758. 263.8 2638 263 8 g1. 1. Nevertheless it fertilizerreleasing fertilizer releasing readsorb re adsorb nonabsorbed non absorbed periods 14 L- 4001190 400-11-900 –5 5 (– 758. 75 (758 263. 26 400119 400-11-90 – ( (75 2 40011 400-11-9 (7 4001 400-11- 400-11 400-1 400-

Resumo: Este estudo investigou a resistência de união ao microcisalhamento (RUµC) de dois (2) agentes de cimentação de resina dual (RelyX™ Ultimate e RelyX™ U200) quando fotoativados através de diferentes espessuras de dissilicato de lítio, com ou sem ciclagem térmica. Discos do IPS e.max Press de 0,5, 1,5 e 2 mm de espessura foram obtidos. Moldes de elastômero (3,0 mm de espessura) com quatro orifícios cilíndricos de 1,0 mm de diâmetro foram colocados sobre as superfícies cerâmicas e preenchidos com agentes de cimentação de resina. Uma tira Mylar, placa de vidro e carga de 250 gramas foram colocadas sobre o molde preenchido. A carga foi removida e os agentes de cimentação resinosos foram fotoativados através da cerâmica usando um LED de pico-único (Radii Plus). Todas as amostras foram armazenadas em água deionizada a 37oC por 24 h. Metade das amostras foi submetida a ciclagem térmica (3.000 ciclos; 5ºC e 55ºC). Todas as amostras foram então submetidas ao teste de RUµC usando uma máquina de teste universal (Instron 4411) com velocidade de 0,5 mm/min. Os dados foram submetidos à Análise de Variância três fatores e ao teste post-hoc de Tukey (α = 0,05). A média de RUµC em 24 h foi significativamente maior do que após a ciclagem térmica (p < 0,05). Não houve diferença estatística entre os cimentos resinosos (p > 0,05). As médias de RUµC para grupos fotoativados através de cerâmica de 0,5 mm foram significativamente maiores do que 1,5 mm e 2,0 mm (p < 0,05). Em conclusão, o aumento da espessura da cerâmica reduziu a resistência de união dos agentes de cimentação resinosos ao dissilicato de lítio. Não foram encontradas diferenças entre os agentes de cimentação resinosos. A ciclagem térmica reduziu a resistência de união de ambos os agentes de cimentação resinosos. Resumo (RUµC (2 RelyX (RelyX U200 U lítio emax max 05 0 5 15 1 1, obtidos 3,0 30 3 (3, 10 Mylar 25 preenchido picoúnico pico único Radii Plus. Plus . Plus) oC 3.000 3000 000 (3.00 ciclos ºC 55ºC. 55ºC 55ºC) Instron 4411 0, mmmin min mm/min posthoc post hoc α 0,05. 005 0,05 0,05) p 20 2, conclusão ( U20 3, (3 3.00 300 00 (3.0 441 0,0 U2 3.0 (3. 44 3. 4

Abstract This study investigated microshear bond strength (µSBS) of two (2) dual-cured resin-luting agents (RelyX™ Ultimate and RelyX™ U200) when photoactivated through varying thicknesses of lithium disilicate, with or without thermal cycling. Discs of IPS e.max Press of 0.5, 1.5, and 2 mm in thickness were obtained. Elastomer molds (3.0 mm in thickness) with four cylinder-shaped orifices 1.0 mm in diameter, were placed onto the ceramic surfaces and filled with resin-luting agents. A Mylar strip, glass plate, and load of 250 grams were placed over the filled mold. The load was removed and the resin-luting agents were photoactivated through the ceramics using a single-peak LED (Radii Plus.) All samples were stored in distilled water at 37oC for 24 h. Half of the samples were subjected to thermal cycling (3,000 cycles; 5ºC and 55ºC). All samples were then submitted to µSBS test using a universal testing machine (Instron 4411) at a crosshead speed of 0.5 mm/min. Data were submitted to three-way ANOVA and Tukey post-hoc test (α=0.05). The mean µSBS at 24 h was significantly higher than after thermal cycling (p<0.05). No statistical difference was found between resin-luting agents (p > 0.05). The mean µSBS for groups photoactivated through 0.5 mm ceramic were significantly higher than 1.5 mm and 2.0 mm (p < 0.05). In conclusion, increased ceramic thicknesses reduced the bond strength of tested resin-luting agents to lithium disilicate. No differences were found between resin-luting agents. Thermal cycling reduced the bond strength of both resin-luting agents. (µSBS (2 dualcured dual cured resinluting resin luting RelyX (RelyX U200 U disilicate emax e max 05 0 5 15 1 obtained 3.0 30 3 (3. cylindershaped cylinder shaped 10 1. diameter strip plate 25 mold singlepeak single peak Radii Plus. Plus oC 3,000 3000 000 (3,00 cycles ºC 55ºC. 55ºC . 55ºC) Instron 4411 0. mmmin min mm/min threeway three way posthoc post hoc α=0.05. α005 α α=0.05 (α=0.05) p<0.05. p005 p p<0.05 (p<0.05) 0.05. 005 0.05 0.05) 20 2. conclusion ( U20 3. (3 3,00 300 00 (3,0 441 α00 α=0.0 (α=0.05 p00 p<0.0 (p<0.05 0.0 U2 3,0 (3, 44 α0 α=0. (α=0.0 p0 p<0. (p<0.0 3, 4 α=0 (α=0. p<0 (p<0. α= (α=0 p< (p<0 (α= (p< (α

Resumo Este estudo verificou o efeito da combinação ácido fluorídrico pré-aquecido/silano/corrente elétrica na adesão do cimento resinoso à cerâmica. Os discos cerâmicos IPS E.max Press embutidos em tubos rígidos de PVC foram separados em quatro grupos associando ácido fluorídrico pré-aquecido e silano aplicado com corrente elétrica (n=10): Ha+S (ácido aquecido + silano); Ha+S+Ec (Ácido aquecido + silano + corrente elétrica); A+S (Ácido + silano) e A+S+EC (Ácido + silano + corrente elétrica). Amostras de cimento resinoso/cerâmica foram armazenadas em água a 37°C por 24 horas. Após o armazenamento foram submetidas ao ensaio de micro cisalhamento, análise de fratura e ângulo de contato no período de 24 horas ou após termociclagem (10.000 ciclos/5-55ºC). Os dados de resistência de união foram avaliados por ANOVA dois fatores. Para comparação entre os tempos de avaliação (24 horas ou termociclagem) foi aplicado o teste t não pareado. Foi assumida significância de 5% para análises e gráficos (software GraphPad Prism 9.0). Em 24 horas, a resistência ao micro cisalhamento apresentou valores similares entre os grupos Ha+S, Ha+S+Ec e A+S+Ec, enquanto A+S apresentou menor valor com diferença estatística. Após a termociclagem, Ha+S e Ha+S+Ec foram similares, assim como A+S e A+S+Ec. Houve diferença significativa em todos os grupos comparando 24 horas (maior valor) com após termociclagem (menor valor). A fratura adesiva foi predominante em todos os grupos e tempos de avaliação. Os grupos Ha+S e A+S apresentaram maiores valores de ângulos de contato comparados aos grupos Ha+S+Ec e A+S+Ec com valores menores. Em conclusão, a associação ácido fluorídrico pré-aquecido/silano aplicado com corrente elétrica promoveu diferentes valores de resistência ao micro cisalhamento, tipos de fratura e ângulos de contato na adesão do cimento resinoso à cerâmica. préaquecido/silano/corrente préaquecidosilanocorrente pré aquecido/silano/corrente cerâmica Emax E max préaquecido n=10 n10 n 10 (n=10) HaS Ha S HaSEc Ec Ácido elétrica) AS ASEC EC elétrica. . resinosocerâmica 37C C 37 2 10.000 10000 000 (10.00 ciclos/555ºC. ciclos555ºC ciclosºC ciclos/5 55ºC ciclos 5 ºC ciclos/5-55ºC) fatores (2 pareado software 9.0. 90 9.0 9 0 9.0) ASEc estatística maior valor. menores conclusão préaquecido/silano préaquecidosilano aquecido/silano aquecidosilanocorrente n=1 n1 1 (n=10 3 10.00 1000 00 (10.0 555ºC ciclos/555ºC ciclos5 ciclos/ ciclos/5-55ºC ( 9. aquecidosilano n= (n=1 10.0 100 (10. (n= 10. (10 (n (1

Abstract This study verified the effect of the combination of preheated hydrofluoric acid/silane/electric current in the adhesion of the resin cement to ceramic. IPS E.max Press ceramic discs embedded in PVC rigid tubes were divided into four groups associating preheated hydrofluoric acid and silane applied with electrical current (n=10): Ha+S (Heated acid + silane); Ha+S+Ec (Heated acid + silane + electrical current); A+S (Acid + silane) and A+S+Ec (Acid + silano + electrical current). Resin cement/ceramic samples were stored in water at 37°C for 24h. After storage, they were submitted to the microshear test, fracture analysis, and contact angle at 24h or after thermocycling (10,000 cycles/5-55ºC). Bond strength data were evaluated by two-way ANOVA. For comparison between evaluation times (24h or thermocycling) was applied unpaired t-test. A significance post-hoc test of p=0.05 was assumed for analyses and graphs (GraphPad Prism 9.0 software). At 24h, the microshear strength showed similar values between Ha+S, Ha+S+Ec, and A+S+Ec groups, while A+S showed the lowest value with a statistical difference. After thermocycling, Ha+S and Ha+S+Ec were similar, as well as A+S and A+S+Ec. There was a significant difference in all groups comparing 24h (highest value) with after thermocycling (lowest value). Adhesive fracture was predominant in all groups and evaluation times. Ha+S and A+S groups showed higher contact angle values compared to the Ha+S+Ec and A+S+Ec with lower values. In conclusion, the association of preheated hydrofluoric acid/silane applied or not with electric current promoted different microshear strength values, fracture types, and contact angles in the resin cement/ceramic bond. acidsilaneelectric Emax E max n=10 n10 n 10 (n=10) HaS Ha S Heated HaSEc Ec current) AS Acid ASEc current. . cementceramic 37C C 37 h storage analysis 10,000 10000 000 (10,00 cycles/555ºC. cycles555ºC cyclesºC cycles/5 55ºC cycles 5 ºC cycles/5-55ºC) twoway two way ANOVA ttest. ttest t test. t-test posthoc post hoc p005 p 0 05 p=0.0 GraphPad 90 9 9. software. software software) highest value. conclusion acidsilane types bond n=1 n1 1 (n=10 3 10,00 1000 00 (10,0 555ºC cycles/555ºC cycles5 cycles/ cycles/5-55ºC p00 p=0. n= (n=1 10,0 100 (10, p0 p=0 (n= 10, (10 p= (n (1 (

RESUMO Objetivos: o estudo buscou avaliar o apego materno-fetal, os traumas na infância e as forças de caráter em mulheres que fizeram uso de crack durante a gestação, internadas em hospital público, em Porto Alegre. Métodos: foram entrevistadas 24 gestantes, em um delineamento transversal, e aplicados os instrumentos: Questionário sobre Traumas na Infância, Escala de Apego Materno-Fetal e Escala de Forças e Virtudes. Resultados: foi encontrado um grau médio ou alto de apego materno-fetal e alta frequência de traumas sofridos na infância, destacando-se abuso emocional e negligência física. Não houve associação significativa entre o vínculo materno fetal e a ocorrência de traumas na infância. As forças de caráter com maior escore foram: bravura, autenticidade e amor. Conclusões: Apesar das condições adversas, foi observado que as gestantes tinham um elevado apego materno-fetal. A identificação das forças de caráter que se destacaram pode ajudar para um tratamento mais efetivo dessas mulheres, sendo esta uma boa estratégia no planejamento de políticas de saúde pública. Objetivos maternofetal, maternofetal fetal, gestação público Alegre Métodos 2 transversal instrumentos Infância MaternoFetal Materno Fetal Virtudes Resultados destacandose destacando física bravura amor Conclusões adversas maternofetal. fetal. pública

ABSTRACT Objective: the study aimed to evaluate maternal-fetal attachment, childhood traumas, and character strengths in women who used crack during pregnancy admitted to a public hospital in Porto Alegre. Methods: twenty-four pregnant women were interviewed, in a cross-sectional design, and were applied the instruments: Childhood Trauma Questionnaire (CTQ), Maternal-Fetal Attachment Scale and the Characters Strenghts Scale. Results: a medium or high degree of maternal-fetal attachment and a high frequency of childhood traumas was found, standing out emotional abuse and physical neglect. There was no significant association between maternal-fetal bonding and the occurrence of trauma in childhood. The character strengths that obtained the highest scores among the pregnant women were bravery, authenticity and love. Conclusion: despite the adverse conditions, it was observed that the pregnant women had a high maternal-fetal attachment. Identifying the strengths that stood out may contribute to the more effective treatment of these women, this being a good strategy in the planning of public health policies. Objective maternalfetal maternal fetal Alegre Methods twentyfour twenty four interviewed crosssectional cross sectional design instruments CTQ, CTQ , (CTQ) MaternalFetal Maternal Fetal Results found neglect bravery love Conclusion conditions policies (CTQ