Abstract: Introduction: Rheumatoid arthritis (RA) is a chronic inflammatory, autoimmune disease, characterized by chronic, additive, symmetrical polyarthritis, which can present with extra-articular manifestations (ExAM), associated with greater morbidity and mortality. Objective: to describe the most frequent ExAM in RA. Methods: a descriptive, cross-sectional and retrospective study was carried out to review the medical records of patients diagnosed with RA, during the period December 2011-January 2022. Results: 150 patients with RA participated, with an average age of 53.7±12.5 years, the predominant sex was female with 84.6%, the evolution time of RA was 7.2±8.9. years; Regarding serological characteristics, 91.1% had positive Rheumatoid Factor and 76.9% had positive antibodies against cyclic citrullinated peptides. Both upon admission and at the last consultation, patients presented some extra-articular manifestation (ExAM), 61.3% and 70%, respectively, with the most frequent being chronic anemia (at admission 44.6% and at last consultation 50.6%), followed by rheumatoid nodules (at admission with 8% and at the last consultation 9.3%). Conclusions: ExAM occurred in 70% of patients, the most frequent being anemia and rheumatoid nodules. These data show the changes in the frequency of ExAM in the disease over time.

Resumen: Introducción : La artritis reumatoide (AR) es una enfermedad inflamatoria crónica, autoinmune, caracterizada por poliartritis crónica, aditiva, simétrica, que puede cursar con manifestaciones extraarticulares (MExA) asociadas a una mayor morbimortalidad. Objetivo: de describir las MExA más frecuentes en AR. Métodos: se realizó un estudio descriptivo, transversal y retrospectivo de revisión de historias clínicas de pacientes diagnosticados con AR, durante el periodo diciembre 2011-enero 2022. Resultados: Participaron 150 pacientes con AR, con una edad promedio de 53,7±12,5 años, el sexo predominante fue el femenino con 84,6%, el tiempo de evolución de la AR fue de 7,2±8,9 años; en cuanto a las características serológicas, 91,1% tenía Factor reumatoideo positivo y 76,9% tenía anticuerpos contra péptidos cíclicos citrulinados positivo. Tanto al ingreso, como en la última consulta los pacientes presentaron alguna manifestación extraarticular (MExA), 61,3% y 70%, respectivamente, siendo las más frecuentes la anemia de los trastornos crónicos (al ingreso 44,6% y en última consulta 50,6%), seguida de nódulos reumatoideos (al ingreso con 8% y en la última consulta 9,3%). Conclusiones: Las MExA se presentaron en 70% de los pacientes, siendo las más frecuentes la anemia y los nódulos reumatoideos. Estos datos muestras los cambios que han tenido la frecuencia de estas MExA en esta enfermedad a través del tiempo.

Abstract Cotton is an important fiber crop, with special significance in the historical, cultural, and socio- economic development of the planet. In Peru, the great color variability of cotton fibers has allowed the commercialization of numerous textile products throughout the centuries. At present, cotton species native to South America, such as Gossypium barbadense, are constantly threatened by anthropogenic factors, and thus there is a clear need for species conservation. Therefore, this study aimed to collect G. barbadense germplasm in Peru, characterize the germplasm by fiber color, and evaluate the application of different methods of germplasm conservation. The evaluated methods were seed bank, field techniques, and in vitro culture. Two hundred seventy-six samples of G. barbadense were collected between 2017 and 2021 and classified by fiber color into monochrome and polychrome of white (114 samples), orange (107) and brown (41). The conservation methods showed that the seed bank samples ranged from 50 g to 1 kg, while 95% of the field accessions survived. In addition, seedlings presented positive developmental responses when they were grown in vitro under modified MS culture, sucrose 2.0%, vitamins, glycine 2.0 mgL-1, and AgNO3 2.0 mg L-1. This study provides evidence of the color variability of G. barbadense distributed throughout Peru, and confirms that this species can be managed and conserved using germplasm conservation methods.

ABSTRACT The collapse of the Fundão Dam in Mariana, MG, in 2015 introduced the challenge of using Technosol, a soil type formed by deposition of iron mining waste along the Doce River banks, for agricultural purposes. This study aimed to determine the optimal water depth for enhancing production of tropical forage, Megathyrsus maximus cv. Mombasa, when grown on iron ore tailings. Additionally, it sought to establish a crop coefficient applicable to the edaphoclimatic conditions of Viçosa, MG, Brazil. The experiment was conducted throughout the summer, fall, and winter of 2022, employing 21 drainage lysimeters. A completely randomized experimental design was adopted, featuring six treatment groups (plants in Technosol receiving water depths ranging from 20 to 120% of the crop’s evapotranspiration, as derived from the control treatment), along with a control group (plants in Latosol with a depth of 100%), each with three repetitions. Our findings showed that irrigation must replace 40% of the crop evapotranspiration. Moreover, cultivating in Technosol resulted in a reduction of productive capacity by 37.39% during the summer/fall and fall seasons. For Mombasa grass grown in Oxisol, crop coefficients of 1.2 during the summer and 1.5 during the fall and winter are advised.

RESUMO O rompimento da Barragem do Fundão em Mariana, MG, ocorrida em 2015, trouxe o desafio de usar o Tecnossolo (tipo de solo) formado pela deposição do rejeito de mineração de ferro nas margens do Rio Doce para agricultura. O objetivo desta pesquisa foi obter a lâmina de água para otimizar a produção da forragem tropical Megathyrsus maximum cv. Mombaça, cultivada em rejeito de mineração de ferro e determinar seu coeficiente de cultura para as condições edafoclimáticas de Viçosa, MG. O experimento foi realizado durante as estações de verão, outono e inverno do ano de 2022, com a utilização de 21 lisímetros de drenagem. O experimento foi distribuído em delineamento inteiramente casualizado com 6 tratamentos (plantas em Tecnossolo com lâminas variando de 20 a 120% da evapotranspiração da cultura, obtida do tratamento-testemunha) e adição de uma testemunha (plantas em Latossolo com lâmina de 100%) com três repetições. Recomenda-se irrigação com reposição de 40% da evapotranspiração da cultura. O cultivo em Tecnossolo diminuiu a capacidade produtiva em 37,39% nos ciclos das estações do verão/outono e outono. Recomenda-se os coeficientes de cultura de 1,2 no verão e 1,5 no outono e no inverno, para o capim-Mombaça cultivado em um Latossolo.

Abstract The flotation mechanism of galena with xanthate as the collector is generally explained based on the mixed potential of the pulp, in which an anodic electron transfer reaction from the collector to the mineral is combined with an O2 cathodic reduction. Sodium sulphide, often used as a mineral activator, strongly influences the pulp's mixed potential, and depending on the dosage applied, it can become a galena depressor reagent. In this way, the current study assesses galena flotability in the absence of collector, as well as in the presence of the collector potassium amyl xanthate (PAX) and sodium sulphide. The effect of an extremely cathodic potential was also studied through the addition of hydrogen peroxide. In addition, the effect of different stages in the oxidation of the galena surface on the flotability was investigated. Moreover, the zeta potential was measured and contact angle (wettability) tests were carried out. The contact angle measurements were taken for a distilled water, PAX solution and for a mixture of PAX and sodium sulphide solution on the oxidized and non-oxidized surface of galena. All the results showed that galena could be floated in all the PAX concentrations tested. It was observed that a moderate oxidation in the galena surface may contribute to an improvement of its flotation with PAX. However, extremely anodic and cathodic potentials cause flotability close to zero. The zeta potential results showed that sodium sulphide affected the interaction between PAX and galena. The measurements of the contact angle corroborated the results obtained in the microflotation tests. pulp O reduction activator pulps s applied reagent way (PAX peroxide investigated Moreover wettability (wettability out water nonoxidized non tested However zero

Abstract In Brazil, 65% of the electric power production comes from hydroelectric power plants (HPPs). In some cases, these power plants divert the course of rivers, resulting in regions impacted by the absence of water, which are known as reduced fow sections (RFS). These sections are regulated by legislation and aim to maintain the minimum fow necessary to preserve the fauna, flora, fish, and human consumption in the region. Depending on the time of year, this minimum flow, also known as ecological flow (residual flow), can reach significant values, resulting in the interruption of power generation in these HPPs. This article presents a study case of two hydroelectric power plants located in different Brazilian states. The objective of this study is to explore the feasibility of implementing auxiliary generator groups that can operate uninterruptedly at different drop heights while ensuring the preservation of residual flow during low flow periods or taking advantage of the overflow flow by spillways during high flow periods. This auxiliary system would use the same set of structures and transmission systems as the main power plant, minimizing environmental impacts and implementation costs, allowing this solution to be implemented in HPPs that face this type of problem in Brazil. The results obtained indicate that HPPs with larger reservoirs have a greater ability to maintain residual flows with minimal generation loss and that run-of-the-river power plants are the most impacted by the maintenance of residual flow.

Abstract Cornstarch is one of the most used depressants in mineral flotation operations. However, corn is a costly input for the Brazilian mineral industry, since its main destination is to serve the animal and human food market and exports. In this study, sorghum and millet, two cheaper starch sources, were tested in order to reduce the mining dependence on corn. A simplex lattice design mixture {3,4} was used to evaluate the best proportion of corn, millet, and sorghum flours to be used as a pyrochlore depressant in relation to the industrially adopted cornstarch (Stargill 6172 supplied by Cargill). Flotation tests were carried out on a bench scale Denver flotation cell. All tests were performed in triplicate in a single rougher stage. The results found suggest that sorghum flour was a stronger pyrochlore depressant compared to corn and millet flours, with an average Nb2O5 content of 1.72 ± 0.05% and recovery of 80.75 ± 4.10%. These values were close to the ones found with Stargill 6172 (1.32 ± 0.02 and 80.95 ± 1.13%, Nb2O5 content and recovery, respectively), the industrially adopted depressant. The marked price and the easiness in the production of the flour in relation to the extraction of starches makes the sorghum flour a potential pyrochlore depressant, replacing the industrially used cornstarch.

Abstract In the county of Pedra Lavrada - PB, various mineral occurrences of pegmatite are observed with prominence at Alto Dois Irmãos - PB, where quartz, feldspar and mica are mined. The understanding of mineral constituents is fundamental to define their industrial employment and to implement improvements in the beneficiation process. The proposal of this research is the detailed characterization and proof of that part of the ore (quartz) considered waste, presenting low poisoning (Fe2O3) and high silica (SiO2) content, to enable its industrial use. Besides that, to minimize the environmental impact through the reuse of this waste, and to determine the correct utilization of the milling equipment. For the pegmatite characterization, done were density determination tests, mineralogical identification by X-ray diffraction (XRD), chemical analysis by fluorescents X-rays and morphological analysis by scanning electron microscopy (SEM/EDS). Then tests were done for the Work Index (WI) calculous and consequently the empirical determination of the dimensions (LxD) of the pebble mill. The sterile presented a medium density of 2.66g/cm³, majority chemical composition of silicon and oxygen and quartz as the main mineralogical stage, indicating that this material has high purity. The. The Work Index (WI) was 15.9 kwh/t showing that this material can be considered resistant to breaking in the grinding process. The necessary energy to the milling was defined in 11.52 kwh/st, that corresponds to 57.28 HP. This power allowed the mill selection with diammeter and length of 1.83m, that provides the production maximization and the energy saving.

Abstract This article presents a formulation for the optimization problem that minimizes the CO2 emission of pile caps with variations of geometry and pile position. The problem is defined by the design variables: concrete pile cap dimensions, rebar ratio, concrete compressive strength, the number of piles, the diameter, and length. The environmental impact was chosen as the objective function, taking CO2 emission as the main parameter. The design procedure was based on the ABNT NBR 6118:2014 (2014), and by the formulation proposed by Blévot & Frémy (1967). Also, the soil structure interaction between the cap and the piles was considered in the optimization problem. The problem was implemented using MATLAB (2016) and solved via a Genetic Algorithm native to the program. Results obtained from numerical examples were compared with structural designs solutions located in the Grande Vitória metropolitan area, Espírito Santo, Brazil and validated with a commercial software. The analyses indicate that design optimizations of pile caps considering the compressive strength of concrete, the diameter and length of piles and the optimal geometry of the pile caps may lead to significant reductions of material consumption, and consequently, a reduction of environmental impacts.

Abstract A continuous increase in levels of atmospheric pollution and emission restrictions has forced scientists and engineers to adopt new strategies to improve and develop internal combustion engines. One strategy is based on the development of new simulation methodologies using computational fluid dynamic (CFD) techniques, proposed in the present article. In this study,the dynamic loop methodology with ANSYS Fluent code is proposed to perform the numerical simulation ofa four-stroke spark ignition engine. The complexity of the real case was first simplified with three-dimensional CAD geometry, which was then discretized in ANSYS Meshing, whereby a hybrid mesh was created using prismatic and tetrahedral elements. Simulations for in-cylinder analyses were performed in cold flow and employing common flow parameters, such as swirl and tumble. The mesh quality results were classified as good or excellent, being higher than 0.79 for orthogonal quality criteria and lower than 0.36 for skewness criteria. Turbulent effects were introduced concerning the opening and closing of the valves. It was found that the turbulence increases during the intake stroke up to 90°, and during the power stroke, wherein the of the piston bowl, had a great contributionthat can be seen from the swirl and tumble profile for the engine cycle. In the case of the turbulence intensity, a sharp increase was registered during the admission step up to 90°, at which point the turbulence intensity was 4.0. It canbe concluded that this is an innovative approach, capable of simulating the engine motion profile in cold flow.

ABSTRACT The occurrence of water with high concentrations of salts hinders the expansion of irrigated agriculture in the semi-arid region of the Brazilian Northeast, making it necessary to adopt strategies capable of minimizing the effects of salt stress on plants. In this context, the objective of present study was to evaluate the effects of hydrogen peroxide application on water relations, gas exchange, photosynthetic pigments, and growth of guava cv. Paluma under irrigation with saline waters in the seedling formation stage. A randomized block design was used, in a 5 × 4 factorial scheme, with three replicates, with five levels of electrical conductivity of water - ECw (0.3, 1.3, 2.3, 3.3, and 4.3 dS m-1) and four concentrations of hydrogen peroxide - H2O2 (0, 25, 50, and 75 µM). Irrigation water salinity above 0.3 dS m-1 increased electrolyte leakage in the leaf blade and reduced the relative water content, synthesis of photosynthetic pigments, gas exchange, and growth of seedlings of guava cv. Paluma, at 80 days after sowing. Foliar application of hydrogen peroxide at concentrations of up to 75 µM reduces the relative water content in the leaf blade of guava seedlings and did not mitigate the effects of salt stress on guava plants in the seedling formation stage.

RESUMO A ocorrência de água com elevadas concentrações de sais dificulta a expansão da agricultura irrigada no semiárido do Nordeste brasileiro, tornando-se necessária a adoção de estratégias capazes de minimizar os efeitos do estresse salino sobre as plantas. Neste contexto, objetivou-se avaliar os efeitos da aplicação de peróxido de hidrogênio nas relações hídricas, nas trocas gasosas, nos pigmentos fotossintéticos e no crescimento de goiabeira cv. Paluma sob irrigação com águas salinas na formação de mudas. Foi utilizado o delineamento em blocos casualizados, em esquema fatorial 5 × 4, com três repetições, sendo cinco níveis de condutividade elétrica da água - CEa (0,3; 1,3; 2,3; 3,3 e 4,3 dS m-1) e quatro concentrações de peróxido de hidrogênio - H2O2 (0; 25; 50 e 75 µM). A salinidade da água de irrigação acima de 0,3 dS m-1 aumentou o extravasamento de eletrólitos no limbo foliar, reduziu o conteúdo relativo de água, a síntese de pigmentos fotossintéticos, as trocas gasosas e o crescimento das mudas de goiabeira cv. Paluma, aos 80 dias após a semeadura. A aplicação foliar de peróxido de hidrogênio em concentrações de até 75 µM, reduz o conteúdo relativo de água no limbo foliar de mudas de goiabeira e não ameniza os efeitos do estresse salino em plantas de goiabeira na fase de formação de mudas.

ABSTRACT Combining refrigeration with packaging is a commonly used technique for fruits intended for export. Thus, the objective of this study was to adapt the post-harvest management of biofortified sweet potato cultivars, using packaging and refrigeration, focused on reaching distant export markets while maintaining the commercial quality. Sweet potatoes of the cultivars BRS-Amélia and Beauregard were selected after harvesting, washed, and packaged. The experimental design used was completely randomized, in a 4 × 7 factorial arrangement consisted of 4 treatments (cultivar BRS-Amélia with and without packaging; and cultivar Beauregard with and without packaging) and 7 evaluations under storage conditions: at 0, 7, 14 (under refrigeration at approximately 8 °C), 17, 20, 23, and 26 days (under room temperature conditions at approximately 25 °C). Each experimental unit contained 500 g of tubbers. The results showed that the refrigerated storage combined with packaging extended the shelf life of the evaluated sweet potatoes: 17 days for BRS-Amélia and 26 days for the cultivar Beauregard. The BRS-Amélia cultivar maintained higher firmness, soluble solids and carbohydrate contents, chroma, and antioxidant activity (FRAP method), and total phenolic contents, in both raw and cooked tissues. The cultivar Beauregard presented less dehydration and greater stability in vitamin C, total phenolic, total carotenoid, soluble carbohydrate, and starch contents in raw and cooked potatoes. Therefore, the combination of packaging and refrigeration preserved the commercial quality of biofortified sweet potatoes for export markets.

RESUMO Combinar refrigeração com embalagem é uma técnica comumente utilizada para frutas destinadas à exportação. Assim, o objetivo deste estudo foi adequar o manejo pós-colheita de cultivares de batata-doce biofortificadas, utilizando embalagem e refrigeração, com foco em atingir mercados de exportação distantes e mantendo a qualidade comercial. As batatas-doces das cultivares BRS-Amélia e Beauregard foram selecionadas após a colheita, lavadas e embaladas. O delineamento experimental utilizado foi inteiramente casualizado, em arranjo fatorial 4 × 7 composto por 4 tratamentos (cultivar BRS-Amélia com e sem embalagem; e cultivar Beauregard com e sem embalagem) e 7 avaliações nas condições de armazenamento: aos 0, 7, 14 (sob refrigeração a aproximadamente 8 °C), 17, 20, 23 e 26 dias (sob condições de temperatura ambiente a aproximadamente 25 °C). Cada unidade experimental continha 500 g de tubérculos. Os resultados mostraram que o armazenamento refrigerado aliado à embalagem prolongou a vida útil da batata-doce avaliada: 17 dias para BRS-Amélia e 26 dias para a cultivar Beauregard. A cultivar BRS-Amélia manteve maior firmeza, solúveis sólidos e teor de carboidratos, croma e atividade antioxidante (método FRAP) e teor de fenólicos totais, tanto nos tecidos crus quanto cozidos. A cultivar Beauregard apresentou menor desidratação e maior estabilidade nos teores de vitamina C, fenólicos totais, carotenóides totais, carboidratos solúveis e amido em batatas cruas e cozidas. Portanto, a combinação de embalagem e refrigeração preservou a qualidade comercial da batata-doce biofortificada para os mercados de exportação.

ABSTRACT Integrated management is considered the best strategy to mitigate the damage caused by plant-parasitic nematodes. However, there is still limited information regarding some integrated techniques. Thus, this study aimed to assess the effects of genetic management associated with chemical control of Meloidogyne javanica in soybean (Glycine max (L.) Merr.) The experiment was installed in a greenhouse according to an 8×4 factorial design with eight replicates. The first factor was soybean cultivar (HO Juruena IPRO, resistant; Foco IPRO, HO Maracaí IPRO, and CZ 58B28 IPRO, moderately resistant; HO Mamoré IPRO, moderately susceptible; and Extrema IPRO, CZ 48B32 IPRO, and HO Aporé IPRO, susceptible). The second factor consisted of an untreated control and commercial nematicides based on abamectin, thiodicarb+imidacloprid, and fluopyram. Plants were inoculated with 2000 nematode eggs, and nematode and vegetative variables were evaluated at 65 d after inoculation. There was an interaction effect on nematode variables. Furthermore, there was an additive effect of genetic management and chemical control, mainly in resistant cultivars treated with thiodicarb+imidacloprid or fluopyram with controls of up to 69.90% and 96.86%, respectively. The application of fluopyram and the use of ‘HO Juruena IPRO’, ‘Foco IPRO’, or ‘HO Maracaí IPRO’ also contributed to the control of M. javanica. Vegetative variables were studied by analyzing product effects separately, but results were inconclusive.

ABSTRACT Tamarind (Tamarindus indica L.) is a species with promising potential for commercial production; therefore, studies involving practices of conducting culture in the initial stage are essential. The present study aimed to evaluate different shading levels and substrate compositions in the seedling production of tamarind. The experimental design was completely randomized in a 4×4 factorial scheme, four levels of shading (0%, 18%, 30%, and 50%) and four substrates (pine bark-based substrate pure and mixed with 50% vermiculite, and sphagnum peat-based substrate pure and mixed with 50% vermiculite), with four replicates of four seedlings. Growth and biometric relationships were evaluated at 40 and 98 d after transplantation (DAT). The results reported that seedlings formed on the sphagnum peat-based substrate on pure or associated with vermiculite at 98 DAT had a height greater than 35 cm and a total 8.5 g DM. In contrast, seedlings produced in pine bark-based substrate did not reach 20 cm in height and had less than 3 g total DM. The condition of 30% and 50% shading promoted greater growth in height, reaching an average height greater than 40 cm, while in the full sun environment, seedlings showed an average of less than 35 cm; however, for the other variables, full sun environment did not differ from 30% shading, producing good quality seedlings. Thus, the cultivation of seedlings in an environment with 0% or 30% shading, associated with the sphagnum peat-based substrate pure or mixed with 50% vermiculite promoted the production of tamarind seedlings with vigorous growth. In the best environments, the best substrates increased, on average, 41.3% number of leaves, 80.5% shoot dry mass, 56.8% root dry mass, and 71.0% total dry mass. In the best substrates, the best environments increased, on average, 18.0% number of leaves, 20.7% shoot dry mass, 8.7% root dry mass, and 14.3% total dry mass.

ABSTRACT This study aimed to evaluate the effects of different colors and management of polypropylene non-woven fabric coverings and two different localized irrigation systems on the physiological characteristics and yield of industrial tomatoes. The experiment was installed in a randomized block design arranged in a split-plot scheme with four replications. Surface and subsurface drip were used in the plots, and five plant cover strategies with non-woven fabric in the subplots: i) without non-woven fabric; ii) coverage with white non-woven fabric; iii) coverage with white non-woven fabric, removed between 30 and 60 days after transplanting the seedlings; iv) coverage with red non-woven fabric; v) coverage with red non-woven fabric, removed between 30 and 60 days after transplanting. Photosynthesis, transpiration, electron transport rate, stomatal conductance, carbon concentration, total fruit yield, and water use efficiency were evaluated. ANOVA and the Scott-Knott test were used. Transpiration is favored by the white non-woven fabric and the stomatal conductance by the white and uninterrupted red one. However, the tomato yield is not influenced by the coverings, except for the red one, removed only between 30 and 60 days after transplanting, which is the worst condition for industrial tomato production. Surface and subsurface irrigation can be used with the same efficiency.

RESUMO O objetivo deste estudo foi avaliar os efeitos de diferentes colorações e manejos de coberturas de tela não-tecida, e de dois diferentes sistemas de irrigação localizada sobre características fisiológicas e produção de frutos do tomateiro industrial. O experimento foi instalado em delineamento de blocos ao acaso, com 4 repetições, em parcelas subdivididas. Gotejamentos superficial e subterrâneo foram utilizados nas parcelas; e 5 estratégias de cobertura da planta com tela não-tecida nas subparcelas: i) sem cobertura; ii) cobertura com tela não-tecida branca; iii) tela não-tecida branca, retirado entre 30 e 60 dias após o transplante; iv) tela não-tecida vermelha; v) tela não-tecida vermelha, retirado entre 30 e 60 dias após o transplante. Avaliou-se: taxa fotossintética, de transpiração e de transporte de elétrons; condutância estomática; concentração de carbono; produção total de frutos e eficiência do uso da água. Foram utilizados ANOVA e teste de Scott-Knott. A transpiração é favorecida pelas coberturas brancas, a condutância estomática, pelas coberturas brancas e vermelha ininterrupta, porém a produtividade não é influenciada pelas coberturas, exceto a vermelha, retirada entre 30 e 60 dias após transplante, que é a pior condição para o tomate industrial. Irrigações superficial e subterrânea podem ser utilizadas com mesma eficiência.

ABSTRACT This article aims to investigate the behavior of exchange rate in the BRICS countries, with an emphasis on exchange rate passthrough and exchange rate determination empirical models. By applying the ARDL Bounds Testing Approach Methodology, from January 2005 to December 2019. Our main results show that: i) there is a long run cointegration among the variables analyzed for all estimated models; ii) there is a very slow speed of adjustment towards the long run equilibrium; iii) there is evidence of exchange rate passthrough to inflation mainly in the long run, but not as strong as before; iv) there is no evidence of exchange rate overshooting; v) international reserve accumulation can be considered a partial explanation for the evidence of no exchange rate overshooting.

RESUMO O artigo tem por objetivo investigar o comportamento da taxa de câmbio nos países do BRICS com ênfase no repasse da taxa de câmbio e em modelos empíricos de determinação da taxa de câmbio. O artigo aplica metodologia ARDL Bounds Testing de Janeiro de 2005 a Dezembro de 2019. Os principais resultados indicam que: i) existe uma relação cointegrante de longo prazo entre as variáveis analisadas para todos os modelos estimados; ii) a velocidade de ajustamento em direção ao equilíbrio de longo prazo é lenta: iii) existe evidência de repasse cambial para a inflação, principalmente no longo prazo, mas o repasse não é tão expressivo como antes; iv) não existe evidência de ultrapassagem da taxa de câmbio; v) a acumulação de reservas pode ser considerada como uma explicação parcial para a evidência de não ultrapassagem da taxa de câmbio.