Abstract The use of wood is often indicated as a decarbonization strategy for the construction sector. However, the CO 2 footprint of native wood, that is, the emissions during wood harvesting, transportation, and processing, depends on the type of forest management practiced. This study quantifies the CO 2 footprint of native rough sawn lumber from forests with three types of harvesting: sustainable management, conventional management, and conventional selective extraction (deforestation). CO 2 emissions were analyzed from harvesting to the end of wood processing based on data from the literature and the Construction Environmental Performance Information System. The CO 2 footprint of rough sawn lumber varies between 25 and 19,860 kCO 2 /m 3 , with the lowest values for wood from sustainable management and the highest for conventional selective extraction. In addition, managed wood stores temporarily in its cell structure ~353kgC/m 3 . Native wood from sustainable harvesting can contribute to decarbonizing buildings, whereas wood from conventional harvesting and deforestation are relevant sources of CO 2 emissions, considering the wood life cycle.

Resmo O uso da madeira é frequentemente apontado como uma estratégia de descarbonização para a construção. Entretanto, a pegada de CO2 da madeira nativa, ou seja, que são as emissões decorrentes da sua exploração florestal, transporte e beneficiamento, depende do tipo de manejo florestal. Este estudo quantifica a pegada de CO2 da madeira nativa serrada bruta, proveniente de três tipos de exploração florestal: manejo sustentável, manejo convencional e extração seletiva convencional (desmatamento). Analisaram-se as emissões de CO2 da exploração florestal até o término do beneficiamento da madeira, com dados da literatura e do Sistema de Informação do Desempenho Ambiental da Construção. A pegada de CO2 da madeira serrada bruta varia entre 25 e 19.860 kgCO2/m3, com os menores valores para a madeira de manejo sustentável e os maiores para a madeira de extração seletiva convencional. Além disso, a madeira manejada estoca temporariamente, em sua estrutura celular, ~353 kgC/m3. Madeiras nativas de manejo florestal sustentável podem contribuir com a descarbonização dos edifícios, enquanto as madeiras de manejo convencional e, sobretudo, de desmatamentosão fontes expressivas de CO2 dentro do seu ciclo de vida.

Abstract Hygrothermal computer simulations consider transient and simultaneous exchanges of heat and moisture between the building elements and the environment. They are an important tool to support the design and performance assessment of buildings. These simulations require the description of the building element, the environmental conditions to which it is exposed, and the hygrothermal characteristics of the materials that compose it as input data. This paper presents an exploratory analysis of the results of the hygrothermal simulation of a concrete wall varying the hygrothermal characteristics of the material. The internal environmental conditions were obtained using EnergyPlus ® and the hygrothermal simulation was done in WUFI ® Pro, with post-processing in WUFI ® Bio to evaluate the risk of mold occurrence. The hygrothermal behavior of the walls varied significantly with the variation in hygrothermal characteristics of the materials, especially for one type of concrete that had a very different capillary transport function. The results indicate the importance of analyzing hygrothermal characteristics and functions for hygrothermal simulations and the need to experimentally determine such characteristics for Brazilian building materials.

Resumo Simulações computacionais higrotérmicas consideram trocas transientes e simultâneas de calor e umidade entre os elementos construtivos e o ambiente, sendo uma ferramenta importante de apoio ao projeto e à avaliação de desempenho de edifícios. Essas simulações requerem como dados de entrada a descrição do elemento construtivo, as condições ambientais às quais ele está exposto e as características higrotérmicas dos materiais. Este artigo apresenta uma análise exploratória dos resultados da simulação higrotérmica de uma parede de concreto variando-se as características higrotérmicas do material. As condições ambientais internas foram obtidas utilizando o EnergyPlus™ e a simulação higrotérmica foi feita no WUFI® Pro, com pós-processamento no WUFI® Bio para avaliar o risco de ocorrência de fungos emboloradores. Houve diferenças significativas no comportamento higrotérmico das paredes em função da variação das características higrotérmicas dos materiais, sobretudo para o tipo de concreto cuja função de transporte capilar mostrou-se diferente dos demais. Os resultados indicam a importância de analisar as características e funções higrotérmicas para simulações higrotérmicas e a necessidade de sua determinação experimental para os materiais de construção brasileiros.

Abstract: This study attempts to obtain the approximate fatigue vulnerability of a steel arch bridge from the Colombian national road network. It establishes the interaction between the demand and the available capacity through the Weibull probability equation, and an AASHTO remaining-time equation indicated in (FHWA, 2015). However, the available capacity in terms of the S-N curve obtained from available international references was modified to account for the effects of corrosion present in elements and/or joints in the bridge. The load demand was modeled as the controlled action of the fatigue truck reported in AASHTO, which was systematically located on a structural model represented by Shell and Frame type finite elements, which represented the information available in drawings (in the current Colombian bridge management system), and the one obtained from structural survey activities. The structural model was further calibrated by a parametric study on the modulus of elasticity of steel, which included the minimization of the error difference in the vertical deflections of a bridge load test, keeping the magnitude within the expected ranges established in a protocol. Such reports of actual deflections were achieved using distance meters at important points of the bridge. This model allowed for estimating the magnitude of stresses in the structural elements of the bridge, especially in an area of interest for the study where chemical and physical elements of structural deficiency were determined. The results show an inverse relationship between the probability of failure and remaining service life. The effect of corrosion on the remaining capacity and the probability of failure of the structural elements is clear.

Resumen: El presente estudio busca obtener la vulnerabilidad aproximada a fatiga de un Puente de acero en arco que pertenece a la red de vías nacionales de Colombia. Se establece la interacción entre la demanda y la capacidad disponible de resistencia através de la ecuación de probabilidad de Weibull y la ecuación indicada en ela norma AASHTO para vida remanente en fatiga (FHWA, 2015). Sin embargo, la capacidad disponible con base en las curvas S-N de capacidad disponible, se modificaron para poder tener en cuenta los efectos de corrosión presentes en elementos y/o conexiones del puente. La carga se modeló mediante el camion de fatiga especificado en la AASHTO, el cual fue localizado de manera sistemática sobre los nudos de un modelo hecho en elementos finitos tipo Shell and Frame. Este modelo se construyó basado en planos disponibles y de algunas actividades de levantamiento estructural en campo. El modelo estructural fue calibrado mediante un proceso paramétrico en el modulo de elasticidad del acero, el cual minimizó el error entre las deflexiones verticales modealdas y las determinadas mediante una prueba de carga sobre el puente real. Las deflexiones reales fueron reportadas mediane el uso de distanciómetros localizados en puntos seleccionados del puente. El modelo calibrado sirvió para estimar la magnitud de los rangos de esfuerzo en los elementos modelados del Puente, especialmente en la zona de estudio, donde se determinó la presencia de corrosión. Los resultados presentan una relación inversa entre la probabilidad de falla por fatiga, y la vida remanente estimada por efectos de fatiga. Se pudo determinar con claridad el efecto de la corrosión en la capacidad del puente y la probabilidad de falla asociada.

Abstract Background: Only a fraction of patients with cutaneous lupus erythematosus (CLE) will eventually progress toward systemic disease (SLE). Objective: To find inflammatory biomarkers which could predict the progression of cutaneous lupus erythematosus (CLE) into systemic lupus erythematosus (SLE) using immunohistochemical (IHC) assays. Methods: Immunohistochemical markers for cytotoxic, inflammatory, and anti-inflammatory responses and morphometric methods were applied to routine paraffin sections of skin biopsies, taken from lesions of 59 patients with discoid lupus, subacute lupus, and lupus tumidus. For the diagnosis of SLE, patients were classified by both the American College of Rheumatology (ACR-82) and the Systemic Lupus International Collaborating Clinics (SLICC-12) systems. Results: Skin samples from CLE/SLE +patients presented higher expression of IL-1β (ARC-82: p = 0.024; SLICC-12: p = 0.0143) and a significantly higher number of cells marked with granzyme B and perforin (ARC: p = 0.0097; SLICC-12: p = 0.0148). Biopsies from CLE/SLE- individuals had higher expression of IL-17 (ARC-82: p = 0.0003; SLICC-12: p = 0.0351) and presented a positive correlation between the density of granzyme A+and FoxP3+ cells (ARC-82: p = 0.0257; SLICC-12: p = 0.0285) and CD8+ cells (ARC-82: p = 0.0075; SLICC-12: p = 0.0102), as well as between granulysin-positive and CD8+ cells (ARC-82: p = 0.0024; SLICC-12: p = 0.0116). Study limitations: Patients were evaluated at a specific point in their evolution and according to the presence or not of systemic disease. The authors cannot predict how many more, from each group, would have evolved towards SLE in the following years. Conclusions: In this cohort, immunohistochemical findings suggested that patients with a tendency to systemic disease will show strong reactivity for IL-1β, while those with purely cutaneous involvement will tend to express IL-17 more intensely.

Abstract: The proper choice of raw materials and manufacturing parameters for Cross Laminated Timber is essential to promote the proper bonding of the lamellas, aiming at their application in construction. However, few Brazilian species are currently used in the production of Cross Laminated Timber. The aim of this work was to characterize the bonding quality of four Brazilian reforestation species (Pinus elliottii (pino ellioti), Eucalyptus grandis (eucalipto), Toona ciliata (toona) and Acrocarpus fraxinifolius (lazcar)) in the manufacture of Cross Laminated Timber with two-component polyurethane adhesive and five different pressure levels (from 0,1 MPa to 1,3 MPa). Bonding quality was evaluated through delamination and glue line shear tests based on the European standard. Delamination was affected by the wood species, and the best adhesion occurred for the Cross Laminated Timber manufactured with Pinus elliottii (pino ellioti) and Acrocarpus fraxinifolius (lazcar) at the bonding pressure of 0,7 MPa. Cross Laminated Timber bonding pressure did not affect the percentage of wood in the shear test fractured surface, whereas higher density Cross Laminated Timber showed higher percentages.

Abstract Studies investigating the effects of different modalities of exercises on the immune system are scarce. Therefore, the aim of this study was to compare the effects of eight weeks of resistance and aerobic training on the proliferation of T and B lymphocytes from mice. Eighteen male C56BL6/J mice were divided into groups (n=6), sedentary, aerobic, and resistance training. After 8 weeks, animals were euthanized, and their splenocytes were labeled and cultured with and without stimulation. Lymphocyte proliferation (CD4+, CD8+ and CD21/CD35+) was evaluated by flow cytometry. The mice subjected to resistance exercise exhibited greater proliferation for total, CD8+ and B lymphocytes (p<0.05), but not CD4+ cells (p>0.05), compared with their sedentary counterparts. We found significant correlations between maximum load and total, CD8+ and B lymphocytes proliferation rates (p<0.05). In conclusion, our results showed that resistance training promoted an improvement in the immune response associated with CD8+ and B lymphocytes.

■ ABSTRACT Introduction: The aesthetic procedure market is growing exponentially in Brazil. This growth has aroused the interest of several professional categories. The decision to practice in the sector must consider the market opportunities in the location in which you intend to operate. However, the area lacks comparative analyses documenting probable regional differences in the country. The objective of the study is to describe market differences in aesthetic procedures between Brazilian states and regions. An index of potential cosmetic consumption (IPCC) is calculated for such a comparative analysis. Method: Cross-sectional study involving providers of nonsurgical aesthetic procedures in Brazil. Searches on Google Maps® were conducted using key terms, and telephone interviews were conducted to obtain information on professional categories, types of providers, and services offered. Positive predictive values were obtained for all search strategies and used to estimate the total number of providers. Population size and per capita income were considered to calculate the IPCCs for Brazilian states. Results: São Paulo, Minas Gerais, and Rio de Janeiro presented the highest IPCCs, being 524, 210, and 180, respectively. Roraima had an IPCC of 14, the lowest in the country. The Southeast Region presented, on average, the highest IPCC (242) among all Brazilian regions. Conclusion: Considering population size and income, the Southeast Region presents the greatest market opportunities for nonsurgical aesthetic procedures in Brazil. Our findings may be of interest to healthcare professionals and investors who work or intend to work in the sector.

■ RESUMO Introdução: O mercado de procedimento estéticos cresce exponencialmente no Brasil. Tal crescimento tem despertado o interesse de várias categorias profissionais. A decisão de praticar no setor deve considerar as oportunidades de mercado da localidade na qual se pretende atuar. Entretanto, a área carece de análises comparativas documentando prováveis diferenças regionais no país. O objetivo do estudo é descrever as diferenças de mercado em procedimentos estéticos entre os estados e regiões brasileiras. Um índice de potencial consumo de cosmiatria (IPCC) é calculado para tal análise comparativa. Método: Estudo transversal envolvendo prestadores de procedimentos estéticos não cirúrgicos no Brasil. Buscas no Google®-Google Maps® foram conduzidas usando termos-chave e entrevistas telefônicas realizadas para obter informações sobre categorias profissionais, tipo de provedores e serviços oferecidos. Valores preditivos positivos foram obtidos para todas as estratégias de busca e usados para estimar o número total de provedores. O tamanho da população e a renda per capita foram considerados para o cálculo dos IPCCs para os estados brasileiros. Resultados: São Paulo, Minas Gerais e Rio de Janeiro apresentaram os maiores IPCCs, sendo 524, 210 e 180, respectivamente. Roraima teve um IPCC de 14, o mais baixo do país. A Região Sudeste apresentou, em média, o maior IPCC (242) entre todas as regiões brasileiras. Conclusão: Considerando o tamanho da população e a renda, a Região Sudeste apresenta as maiores oportunidades de mercado em procedimentos estéticos não cirúrgicos no Brasil. Nossos achados podem ser de interesse para profissionais de saúde e investidores que atuam ou pretendem atuar no setor.

Abstract Roadkill is one of the most direct impacts on fauna, leading to numerous direct and indirect impacts. Road-killed animals could serve as a resource for research and teaching purposes, but first, they need to have their tissues preserved by some technique. Plastination is one of the most modern techniques for the conservation of biological tissues, its principle is the replacement of body fluids by a curable polymer, resulting in a non-toxic, odorless, and manipulable material. So the main aim of this work was to compose a collection of plastinated roadkill victims from the Biological Reserve Sooretama region, adapting the standard protocol to the different taxa worked here (Avialae, Reptilia, Amphibia, and Mammalia). For this, 42 animals were used, previously frozen and stored in the Sooretama Biological Reserve and Vale Natural Reserve until they were sent for processing. Upon arriving at the Plastination laboratory at the Federal University of Espírito Santo, the animals underwent the 4 stages of plastination: fixation, dehydration, forced impregnation, and chemical cure; some adaptations were made to improve the final specimens. The results proved that the plastination of these animals is extremely viable in generating satisfactory results. Given the results obtained, it becomes clear how plastination can become an alternative to implement in the composition of biological collections using roadkill animals. The animals prepared in this work comprise an unprecedented collection available for different applications, such as exhibitions, practical classes, and research.

RESUMO Objetivo: Verificar as características clínicas, as comorbidades associadas e os desfechos da COVID-19 em adolescentes. Fontes de dados: Trata-se de uma revisão sistemática elaborada com base em artigos publicados entre 2020 e 2022 nas bases de dados United States National Library of Medicine (PubMed), Biblioteca Virtual em Saúde (BVS), Science Direct, Web of Science e Scopus. O estudo foi registrado no International Prospective Register of Systematic Reviews, n° CRD42022309108. Síntese dos dados: Foram identificados 1.188 estudos. Após a aplicação dos critérios de seleção, 13 artigos foram incluídos. A prevalência foi de 25%; os casos leves foram predominantes; e febre, tosse, cefaleia, anosmia, congestão nasal e ageusia foram frequentes. Febre e tosse foram proporcionalmente maiores em casos hospitalizados, com 81 e 68%, respectivamente. Dispneia (OR 6,3; IC95% 2,8–14,3), febre (OR 3,8; IC95% 2,0–7,4) e tosse (OR 3,4; IC95% 2,0–6,0) foram associados a casos graves. Até 28% necessitaram de cuidados intensivos e 38% de ventilação mecânica. A preexistência de comorbidade aumentou o risco de internação e óbito. Os casos graves estão associados ao risco de óbito (risco relativo — RR 4,6; IC95% 2,8–7,5). As raças/cores preta, parda e indígena e os moradores de regiões mais pobres foram grupo de risco. Conclusões: A revisão permitiu conhecer o perfil da doença e poderá favorecer a elaboração de políticas públicas, além de contribuir para a literatura atual no campo da saúde do adolescente.

ABSTRACT Objective: To verify the COVID-19 clinical characteristics, associated comorbidities, and outcomes in adolescents. Data source: This is a systematic review study based on articles published between 2020 and 2022 in the United States National Library of Medicine - PubMed (MedLine), Virtual Health Library – VHL (LILACS), Science Direct, Web of Science, and Scopus (Elsevier) databases. The study was registered in the International Prospective Register of Systematic Reviews, under No. CRD42022309108. Data synthesis: A total of 1188 studies were identified. After applying the selection criteria, 13 articles were included. Prevalence was 25%; mild cases were predominant; and fever, cough, headache, anosmia, nasal congestion, and ageusia were frequent. Fever and cough were proportionally higher in hospitalized cases: 81 and 68%, respectively. Dyspnea (odds ratio [OR] 6.3; confidence interval 95%[CI] 2.8–14.3), fever (OR 3.8; 95%CI 2.0–7.4), and cough (OR 3.4; 95%CI 2.0–6.0) were associated with severe cases. Up to 28% required intensive care and 38% required mechanical ventilation. Pre-existing comorbidities increased the risk of hospitalization and death. Severe cases were associated with the risk of death (relative risk [RR] 4.6; 95%CI 2.8–7.5). The black, mixed, and indigenous races/skin colors represented risk groups, as well as residents of poorer regions. Conclusions: The review provided a better understanding of the disease profile and may favor the development of public policies, in addition to contributing to the current literature in the field of adolescent health.

ABSTRACT: The effect of ultrasound on Biceps femoris muscle tenderness was investigated using a 22 Central Composite Rotatable Design (CCRD) with triplicates at the central point. We evaluated the following independent variables: ultrasound intensity ranging from 11.30 to 33.90 W cm-2 and exposure time between 35 and 205 s. The ultrasound bath’s frequency (80 kHz) and temperature (10 ºC) were the fixed ones. To validate the model, the muscle was treated at the CCRD’s optimized condition (80 kHz, 22.60 W cm-2, 120 s, 10 ºC) evaluated, and compared with the muscle control sample (non-treated). A 22% shear force reduction was observed compared to the control sample (no ultrasound treatment) after 144 h, and stored at 5 ºC. Moreover, a sarcoplasmic calcium concentration increase was noted for ultrasound-treated muscle, probably activating the calpain enzyme system. In contrast, no significant influence (P > 0.05) was observed for pH, color index, lipid oxidation, water holding capacity, and drip loss by ultrasound treatment at the optimized conditions. Therefore, ultrasound application is promising and suitable for improving muscle tenderness without losing meat quality. This study highlighted the ultrasound effect on the tenderness of a less studied muscle (Biceps femoris) by combining short ultrasound exposure (120 s) and an 80 kHz frequency.

RESUMO: O efeito do ultrassom sob a maciez do músculo Biceps femoris foi avaliado usando um Delineamento Composto Central Rotacional (DCCR) 22 com triplicatas no ponto central. As variáveis independentes estudadas foram a intensidade do ultrassom que variou de 11,30 a 33,90 W cm-2 e o tempo de exposição de 35 e 205 s. A frequência do banho de ultrassom (80 kHz) e a temperatura (10 ºC) foram fixas. Para validar o modelo, a carne foi tratada na condição otimizada do DCCR (80 kHz, 22,60 W cm-2, 120 s, 10 ºC), avaliada e comparada à amostra controle (não tratada). Uma redução de 22% na força de cisalhamento foi observada em comparação à amostra controle após 144 h e armazenada a 5 ºC. Além disso, um aumento da concentração de cálcio sarcoplasmático foi observado para o músculo tratado com ultrassom, o que provavelmente ativou o sistema enzimático da calpaína. Em contraste, o tratamento com ultrassom nas condições otimizadas não influenciou significativamente (P > 0,05) o pH, cor, oxidação lipídica, capacidade de retenção de água e perda de gotejamento. Portanto, a aplicação do ultrassom é promissora e adequada para melhorar a maciez do músculo sem perder a qualidade da carne. Este estudo destacou o efeito do ultrassom na maciez de um músculo pouco estudado (Biceps femoris) ao combinar exposição curta ao ultrassom (120 s) e uma frequência de 80 kHz.

Cancer is one of the major causes of death worldwide, and breast cancer is the most prevalent and deadly type among women. Despite the side effects and the phenomena of chemoresistance associated with the drugs involved, chemotherapy remains the main therapeutic strategy to combat and control breast cancer. Therefore, several new classes of compounds against breast cancer have been explored, in an effort to identify new drug candidates with alternative mechanisms of action. The principal results of such exploration, focusing on caged xanthones, thiosemicarbazones and photosensitizers, are presented in this review, along with the main aspects of the drug discovery process against breast cancer. More specifically, the design, structure-activity relationship investigations and anti-breast cancer properties of these three classes are described and discussed in this work. worldwide women involved Therefore explored action exploration xanthones photosensitizers review specifically design structureactivity structure activity antibreast anti work

Abstract Objective To assess the functional disability level and identify associated factors in people after Ischemic Cerebral Vascular Accident. Methods A prospective cohort, carried out in a reference hospital in neurology with 224 people with ischemic stroke. Data collection took place between March and October 2019. Participants were followed up during hospitalization, when sociodemographic and clinical variables were collected using specific instruments and contacted after 90 days, by telephone call, to apply the Modified Barthel Index. In the analysis, descriptive statistics and Pearson’s chi-square test were applied. Statistical significance of 5% was adopted. Results Most had some degree of functional disability (58.5%), with 29.5% having moderate dependence and 29.0% having severe dependence. The variables being female (p=0.011), time of arrival at the reference hospital greater than or equal to 4.5 hours (p=0.017), previous stroke (p=0.031), not having undergone thrombolysis (p=0.023), having high blood pressure (p=0.032) and greater severity estimated by the National Institute of Health Stroke Scale (p=0.000) were associated with a higher disability level. Conclusion Moderate to severe dependence predominated. The severity of the event, previous event, hypertension, non-submission to thrombolysis, delay in arriving at the hospital and female gender were associated with a higher functional disability level.

Resumen Objetivo Evaluar el nivel de incapacidad funcional e identificar los factores asociados en las personas después de un accidente cerebrovascular isquémico. Métodos Cohorte prospectiva, realizada en un hospital de referencia en neurología, con 224 personas con accidente cerebrovascular isquémico. La recopilación de datos se llevó a cabo entre marzo y octubre de 2019. Se acompañó a los participantes durante la internación, momento en que se recopilaron las variables sociodemográficas y clínicas mediante la utilización de instrumentos específicos, y se los contactó 90 días después, por teléfono, para aplicar el Índice de Barthel modificado. En el análisis se aplicó estadística descriptiva y la prueba χ2 de Pearson. Se adoptó significación estadística de 5 %. Resultados La mayoría presentó algún nivel de incapacidad funcional (58,5 %), de los cuales el 29,5 % presentó dependencia moderada y el 29,0 % dependencia severa o grave. Las siguientes variables fueron asociadas a un mayor nivel de incapacidad: sexo femenino (p=0,011), tiempo de llegada al hospital de referencia mayor o igual a 4,5 h (p=0,017), accidente cerebrovascular previo (p=0,031), no haber realizado trombólisis (p=0,023), tener hipertensión arterial (p=0,032) y mayor gravedad estimada por la National Institute of Health Stroke Scale (p=0,000). Conclusión Predominó la dependencia de moderada a grave. La gravedad del evento, evento previo, hipertensión, no realización de trombólisis, retraso de la llegada al hospital y sexo femenino fueron las variables asociadas a un mayor nivel de incapacidad funcional.

Resumo Objetivo Avaliar o nível de incapacidade funcional e identificar os fatores associados em pessoas após Acidente Vascular Cerebral Isquêmico. Métodos Coorte prospectiva, realizada em hospital de referência em neurologia, com 224 pessoas com acidente vascular cerebral isquêmico. A coleta de dados ocorreu entre março a outubro de 2019. Os participantes foram acompanhados durante a internação, quando as variáveis sociodemográficas e clínicas foram levantadas empregando-se instrumentos específicos e contatados após 90 dias, por ligação telefônica, para aplicação do Índice de Barthel modificado. Na análise, aplicou-se estatística descritiva e o teste Qui-quadrado de Pearson. Adotou-se significância estatística de 5%. Resultados A maioria apresentou algum grau de incapacidade funcional (58,5%), sendo que 29,5% apresentaram dependência moderada e 29,0% severa ou grave. As variáveis sexo feminino (p=0,011), tempo de chegada ao hospital de referência maior ou igual a 4,5h (p=0,017), Acidente vascular cerebral prévio (p=0,031), não ter realizado trombólise (p=0,023), ter hipertensão arterial (p=0,032) e maior gravidade estimada pela National Institute of Health Stroke Scale (p=0,000) foram associadas a maior nível de incapacidade. Conclusão Predominou a dependência de moderada a grave. A gravidade do evento, evento prévio, hipertensão, não submissão à trombólise, retardo à chegada ao hospital e sexo feminino foram associados a maior nível de incapacidade funcional.

ABSTRACT Objective: To investigate exclusive breastfeeding (EBF) intention and associated variables among women in the third trimester of pregnancy. Methods: The data were collected with a questionnaire for the pregnant women (n=653), from December/2018 to November/2019. They answered the Infant Feeding Intentions (IFI) scale, translated and adapted to Brazilian Portuguese, and a questionnaire on sociodemographic, biological, family, pregnancy, breastfeeding, health care, and habits variables. Descriptive statistics and multiple logistic regression analyses were performed with a 5% significance level, following a multilevel hierarchical model that estimated the association between the dependent and independent variables. The outcome EBF intention measured by the IFI score was dichotomized by the median (<16 or =16). Results: Mean±standard deviation score for the IFI scale was 14.4±2.6 (score 0: very strong intention to not breastfeed at all; score 16: very strong EBF intention up to six months). The results from the regression analysis showed that pregnant women who had no intention to bottle feed (OR=4.33; 95%CI 2.79-6.72) or did not know (OR=1.85; 95%CI 1.21–2.82), those who planned the pregnancy (OR=1.52; 95%CI 1.09–2.12), those who believed they would have help to care for the baby (OR=3.60; 95%CI 1.51–8.56) or did not know (OR=3.97; 95%CI 1.26–12.51), and those who reported knowing the World Health Organization recommendations on breastfeeding (OR=1.73; 95%CI 1.13–2.64) were more likely to show a very strong EBF intention. Conclusions: Pregnant women in the third trimester of pregnancy presented a strong EBF intention. The higher EBF intention score was significantly associated with the structural, setting, and individual determinants.

RESUMO Objetivo: Investigar a intenção materna de amamentar exclusivamente (IMA) e variáveis associadas entre as mulheres no terceiro trimestre de gravidez. Métodos: A coleta de dados foi realizada por meio de entrevista e questionário semiestruturado e autoadministrado, entre dezembro/2018 e novembro/2019. As gestantes (n=653) responderam à escala Infant Feeding Intentions (IFI) testada, traduzida e adaptada para o português do Brasil e ao questionário contendo perguntas sobre variáveis sociodemográficas, biológicas e familiares, bem como relacionadas à gestação, ao aleitamento materno, à assistência à saúde e a hábitos. Foram realizadas análises estatísticas descritivas e de regressão logística múltipla hierarquizada, com nível de significância de 5%, para estimar a associação entre as variáveis independentes e o desfecho. A IMA, medida pela escala IFI, foi dicotomizada pela mediana (<16 ou =16). Resultados: A pontuação média±desvio padrão para a escala IFI foi de 14,4±2,6. Os resultados da análise de regressão mostraram que as gestantes que não tinham intenção de oferecer mamadeira (OR=4,33; IC95% 2,79-6,72) ou não sabiam (OR=1,85; IC95% 1,21–2,82), que planejaram a gestação (OR=1,52; IC95% 1,09–2,12), aquelas que acreditavam que teriam ajuda nos cuidados com o bebê (OR=3,60; IC95% 1,51–8,56) ou que não sabiam (OR=3,97; IC95% 1,26–12,51), bem como aquelas que relataram conhecer as recomendações da Organização Mundial de Saúde sobre amamentação (OR=1,73; IC95% 1.13–2.64) tinham mais chances de mostrar uma IMA muito forte. Conclusões: As gestantes no terceiro trimestre de gestação apresentaram forte IMA. A maior IMA esteve significativamente associada aos determinantes estruturais, contextuais e individuais.

ABSTRACT: This study recorded the physicochemical properties of the marula fruits, the biometry and breaking the dormancy in the marula seeds. Using 200 ripe fruits, the physicochemical characterization was done. From a random sample of 400 seeds, an assessment of the biometrics was performed, and the weight, length, width and thickness of the fruits and seeds were evaluated. Two experiments were conducted to study dormancy breaking using pre-germination treatments, which included immersing the marula seeds five times (0, 15, 30, 45 and 60 minutes) in concentrated sulfuric acid (96%) and water, at 65 ºC temperature. The control was time zero, using plain distilled water, with 25 seeds per treatment and four replications. The marula fruits revealed average values of 21.65 ± 3.44 g, 35.5 ± 2.38 and 34.8 ± 2.73, respectively, for weight, diameter and length. The soluble solids (SS), Hydrogenonic Potential (pH), titratable acidity (AT) and ratio (AT/SS) were 14.74 ± 1.0º Brix, 3.93 ± 0.49 pH, 0.63 ± 0.22 and 27.07 ± 12.10, respectively. For the weight of one thousand seeds, the average value was 3.576 ± 188.4 g. The mean values for the dimensions of the width, length and diameter of the seeds were 22.9 ± 2.11; 23.7 ± 2.04; and 14.9 ± 2.09 mm, respectively. The physiological quality of these seeds was enhanced by immersing the seeds from freshly picked fruits in sulfuric acid for a maximum of 30 minutes and storing them for six months.

RESUMO: Objetivou-se com este trabalho estudar as características físico-químicas de frutos, biometria e superação da dormência de sementes de marula. Para a caracterização físico-química foram utilizados 200 frutos maduros. Realizou-se a biometria utilizando uma amostra aleatória de 400 sementes e foram avaliados: peso, comprimento, largura e espessura de frutos e sementes. Para o estudo da superação de dormência foram realizados dois experimentos com os tratamentos pré-germinativos constituídos pela imersão das sementes em ácido sulfúrico concentrado (96%) e água a temperatura de 65 ºC por cinco tempos (0, 15, 30, 45 e 60 minutos), sendo o tempo zero a testemunha, onde utilizou-se apenas água destilada, com quatro repetições de 25 sementes por tratamento. Os frutos de marula apresentaram valores médios de 21,65 ± 3,44 g, 35,5±2,38 e 34,8±2,73 mm de peso, diâmetro e comprimento, respectivamente e sólidos solúveis (SS), Potencial Hidrogeniônico ( pH), acidez titulável (AT) e ratio (AT/SS) foram de 14,74 ± 1,0 ºBrix, 3,93 ± 0,49 pH, 0,63 ± 0,22 e 27,07 ± 12,10 respectivamente. As sementes apresentaram valores médios de 3.576 ± 188,4 g para o peso de mil sementes. Para as dimensões, largura, comprimento e diâmetro de sementes, apresentaram valores médios de 22,9 ± 2,11; 23,7 ± 2,04; e 14,9 ± 2,09 mm respectivamente. A imersão das sementes procedentes de frutos recém colhidos em ácido sulfúrico por até 30 minutos e o armazenamento por seismeses promove incrementos na sua qualidade fisiológica.

Abstract The alkali-silica reaction (ASR) is one of the problems that can compromise concrete durability, as the chemical reactions between the reactive aggregate and concrete pore solution, specifically sodium (Na+), potassium (K+), calcium (Ca2+) and hydroxyl (OH-) in the presence of moisture, trigger expansion and cracking of concrete elements. The use of pozzolanic materials, such as finely ground glass powder (particles smaller than 75μm), to partially replace cement has been widely studied and has demonstrated beneficial results. However, because the behavior of pozzolans towards ASR is not completely understood yet, this work evaluates the effect of incorporating ground glass powder into cementitious composites against ASR. To this end, 8% silica fume was used as a control admixture, and four levels of glass powder (10, 20, 30, and 50%) were incorporated into the cementitious mixture to partially replace cement. Expansion tests were carried out in accordance with NBR15577-4 (ABNT, 2018) on mortar bars using the accelerated test method to assess the mitigation of expansions. The results show that the expansions caused by ASR decreased with the increasing content of glass powder in the cement mixtures. Furthermore, only the 50% level reduced the expansions to a safe value according to the Brazilian standard.

Resumo A reação álcali-sílica (RAS) é um dos problemas que pode comprometer a durabilidade do concreto, uma vez que as reações químicas entre o agregado reativo e a solução porosa do concreto, em particular, sódio (Na+), potássio (K+), cálcio (Ca2+) e hidroxila (OH-) na presença de umidade, desencadeiam a expansão e fissuração dos elementos de concreto. O uso de materiais pozolânicos, como o pó de vidro finamente moído (com partículas abaixo de 75μm), para substituir parcialmente o cimento, tem sido amplamente estudado e demonstrou resultados benéficos. No entanto, devido ao fato de que o comportamento das pozolanas em relação à RAS ainda não é completamente compreendido, este trabalho avalia o efeito da incorporação de pó de vidro moído em compósitos cimentícios frente a RAS. Para isso, 8% de sílica ativa como controle, e quatro teores de pó de vidro (10, 20, 30 e 50%) foram incorporados à mistura cimentícia em substituição parcial ao cimento. Testes de expansão foram realizados de acordo com a NBR15577-4 (ABNT, 2018) em barras de argamassa usando o método de teste acelerado para avaliar a mitigação das expansões. Os resultados mostram que as expansões causadas pela RAS diminuíram com o aumento do teor de pó de vidro das misturas de cimento. Além disso, apenas o nível de 50% reduziu as expansões a um valor seguro de acordo com a norma brasileira.