Abstract The objective of this study was to analyze the influence of insertion torque, bone type, and peri-implant bone loss on implant stability quotient (ISQ) of cylindrical external hexagon (EH) and Morse Taper (MT) implants. Forty-four single implants were placed in the edentulous areas of 20 patients who met the inclusion and exclusion criteria. Immediately after implant placement (t1) and after osseointegration (four and six months for mandible and maxilla, respectively) (t2), insertion torque, resonance frequency, and peri-implant bone loss were measured using probing depths and digital periapical radiography. A significant difference was noted in the ISQ values between t1 and t2 in type III bone for EH and MT implants. No significant difference in bone loss values was observed when comparing bone types for EH or MT in all evaluated sites. Based on marginal bone loss assessed using radiography, there was no significant difference between the MT and EH groups. A positive correlation between torque and ISQ t1 value was observed for MT (correlation: 0.439; p = 0.041) and EH (correlation: 0.461; p = 0.031) implants. For EH and MT implants, the greater the insertion torque, the greater was the ISQ value (moderately positive correlation). A weak negative correlation was found between bone type and ISQ t1 for MT implants. Contrarily, no correlation was observed between bone type and ISQ t1 for EH implants. In all cases, bone loss around the implants was clinically normal. periimplant peri (ISQ (EH (MT Fortyfour Forty four 2 criteria t (t1 maxilla respectively t2, , (t2) frequency radiography sites groups (correlation 0.439 0439 0 439 0.041 0041 041 0.461 0461 461 0.031 0031 031 moderately correlation. . correlation) Contrarily cases normal (t (t2 0.43 043 43 0.04 004 04 0.46 046 46 0.03 003 03 0.4 4 0.0 00 0.

Abstract In this study, we aimed to evaluate the halitosis and pain threshold of the peri-implant soft tissues in individuals rehabilitated with implant-supported prostheses. Forty-eight subjects were divided into four groups (n = 12) according to their prosthetic rehabilitation: single-tooth fixed prosthesis, multi-tooth fixed prosthesis, overdentures, and the Brånemark protocol. Halitosis was measured using a halimeter, whereas the pain threshold was measured using Von Frey monofilaments. Measurements were taken before (t0) and 30 days after (t1) placement of healing caps, and at the time of (t2) and 30 days after (t3) prosthetic placement. Halitosis data were analyzed using the chi-square test and Bonferroni correction (p < 0.05). Two-way ANOVA and Tukey’s test (p < 0.05) were used to analyze pain threshold data. We noted an association between halitosis and time for the Brånemark protocol [X2(6) = 18.471; p = 0.005] and overdenture groups [X2(6) = 17.732; p = 0.007], and between halitosis and type of prosthesis only at t0 [X2(6) = 12.894; p = 0.045]. The interaction between time and the type of prosthesis significantly interfered with the mean pain threshold values (p = 0.001). At most time points, the majority of participants in each group had clinically unacceptable halitosis. After 30 days of using the prostheses, the overdenture group had a lower pain threshold compared to the Brånemark protocol group. study periimplant peri implant implantsupported supported prostheses Fortyeight Forty eight n 12 rehabilitation singletooth single tooth multitooth multi overdentures halimeter monofilaments t (t0 3 t1 (t1 caps t2 (t2 t3 (t3 chisquare chi square 0.05. 005 0.05 . 0 05 Twoway Two way Tukeys Tukey s X26 X X2 6 [X2(6 18.471 18471 18 471 0.005 0005 17.732 17732 17 732 0.007, 0007 0.007 , 007 0.007] 12.894 12894 894 0.045. 0045 0.045 045 0.045] 0.001. 0001 0.001 001 0.001) points 1 (t 00 0.0 [X2( 18.47 1847 47 0.00 000 17.73 1773 73 12.89 1289 89 004 0.04 04 0. [X2 18.4 184 4 17.7 177 7 12.8 128 8 [X 18. 17. 12.

Resumo Este estudo teve como objetivo avaliar a halitose e o limiar de dor dos tecidos moles peri-implantares em indivíduos reabilitados com próteses implantossuportadas. Um total de 48 indivíduos foram divididos em quatro grupos (n=12), de acordo com as reabilitações: prótese fixa unitária, prótese fixa multidentária, sobredentadura e protocolo de Brånemark. A halitose foi medida com um halímetro, enquanto o limiar de dor foi medido com monofilamentos de von Frey. As medições foram feitas antes (t0) e 30 dias após (t1) a colocação das tampas de cicatrização e no momento (t2) e 30 dias após (t3) a colocação da prótese. Os dados de halitose foram analisados por meio do teste qui-quadrado e correção de Bonferroni (p < 0,05). ANOVA de duas vias e o teste de Tukey (p < 0,05) foram usados para analisar os dados do limiar de dor. Observou-se associação entre halitose e tempo para o protocolo de Brånemark [X2(6) = 18,471; p = 0,005] e grupos overdenture [X2(6) = 17,732; p = 0,007], e entre halitose e tipo de prótese apenas em t0 [X2(6) = 12,894; p = 0,045]. A interação entre o tempo e o tipo de prótese interferiu significativamente nos valores médios do limiar de dor (p = 0,001). Na maioria dos pontos de tempos, a maioria dos participantes de cada grupo apresentava halitose clinicamente inaceitável. Após 30 dias de uso das próteses, o grupo overdenture apresentou menor limiar de dor em comparação ao grupo do protocolo de Brånemark. periimplantares peri implantares implantossuportadas 4 n=12, n12 n n=12 , 12 (n=12) reabilitações unitária multidentária halímetro Frey t (t0 3 t1 (t1 t2 (t2 t3 (t3 quiquadrado qui quadrado 0,05. 005 0,05 . 0 05 Observouse Observou se X26 X X2 6 [X2(6 18,471 18471 18 471 0,005 0005 17,732 17732 17 732 0,007, 0007 0,007 007 0,007] 12,894 12894 894 0,045. 0045 0,045 045 0,045] 0,001. 0001 0,001 001 0,001) tempos inaceitável n1 n=1 1 (n=12 (t 00 0,0 [X2( 18,47 1847 47 0,00 000 17,73 1773 73 12,89 1289 89 004 0,04 04 n= (n=1 0, [X2 18,4 184 17,7 177 7 12,8 128 8 (n= [X 18, 17, 12, (n

RESUMO Objetivo: O presente estudo teve como objetivo avaliar a estabilidade dimensional e manutenção de detalhes de alginatos convencionais e de alta estabilidade por até 5 dias de armazenamento. Métodos: Para esse estudo, foram selecionados dois tipos de alginatos: convencional (Hydrogum) (n = 10) e de alta estabilidade (Hydrogum 5) (n = 10), sendo produzidos com o auxílio de um bloco metálico cilíndrico e um molde metálico em forma de anel (especificações 18, 19 e 25, ANSI/ADA). Para o teste de estabilidade dimensional, dez imagens foram obtidas imediatamente e para cada tempo de armazenamento (15 min, 24, 48, 72, 96 e 120 horas), realizadas por câmera digital. As amostras foram mantidas hermeticamente fechadas em sacos plásticos (23°C). Para o teste de reprodução de detalhes, as amostras foram utilizadas para obter 140 (n = 70 por grupo) modelos de gesso, sendo observada a precisão angular de três sulcos (20 µm, 50 µm e 75 µm) para cada período. A precisão da reprodução de detalhes foi classificada usando uma classificação de pontuação predeterminada. As medições das mudanças dimensionais foram feitas no programa Corel DRAW X6. Os dados foram submetidos ao teste t de Student (α = 0,05). Resultados: Foi observada diferença estatística em relação à matriz após 24h para ambos os alginatos. Uma mudança dimensional linear negativa estatisticamente significativa (contração) foi verificada após 24 h de armazenamento (1,52% para alginato de alta estabilidade; 1,32% para alginato convencional). O alginato de alta estabilidade manteve os detalhes completos por até 72 horas, enquanto o alginato convencional, por 24 horas. Os alginatos reproduziram o sulco de 75 µm para todos os períodos. Conclusão: As impressões feitas com ambos os alginatos devem ser imediatamente vazadas para se ter resultados clínicos satisfatórios.

ABSTRACT Objective: This study aimed to evaluate the dimensional stability and maintenance of details of conventional and high stability alginates up to 5-day storage. Methods: Two types of alginates were selected (n=10) for this study, conventional (Hydrogum) and high stability alginates (Hydrogum 5), which were produced with the aid of a cylindrical metal block and a ring-shaped metal mold (Specifications 18, 19, and 25, ANSI/ADA). Ten images were obtained from the molds for the dimensional stability test, which were taken immediately after their production and at each different storage periods (15 min, 24 h, 48 h, 72 h, 96 h, and 120 h) by a digital camera. The specimens were kept hermetically sealed in plastic bags (23°C) and then used to obtain 140 (n=70) dental stone models, used in the detail reproduction test, in which the angular accuracy of three grooves (20 µm, 50 µm, and 75 µm) was observed at each period. The details reproduction accuracy was classified using a predetermined score classification. Measurements of dimensional changes were made in the Corel DRAW X6 program. The data were submitted to the Student’s t-test (α?#8197;= 0.05). Results: A statistically significant difference concerning the size of the matrix was observed after 24h for both alginates, and a statistically significant negative linear dimensional change (contraction) was verified after 24 h of storage (1.52% for the high stability alginate, and 1.32% for the conventional alginate). The high stability alginate kept the full details for 72 hours, while the conventional alginate, for 24 h. Both alginates reproduced the 75 µm groove at all storage periods. Conclusion: Impressions made with both alginates presented satisfactory clinical results when the alginates were immediately poured.

Abstract Temporomandibular dysfunction (TMD), anxiety, and depression are disorders that, due to the current lifestyle, are affecting an increasing portion of the population. Investigating the prevalence of the symptoms of these disorders during the quarantine due to the coronavirus 2019 pandemic (COVID-19) is important to outline clinical strategies for patient care. Objective: This study assessed the prevalence of TMD symptoms, anxiety, depression, and oral behaviors and their associations during the social isolation due to COVID-19. Methodology: Questionnaires were used to assess TMD symptoms in accordance with the Diagnostic Criteria for Temporomandibular Disorders: clinical protocol and assessment instruments, a questionnaire to verify oral behaviors and Hospital Anxiety and Depression Scale to assess symptoms of anxiety and depression in students of dentistry at the Faculty of Health Sciences of the University of Brasília in May 2020. Qualitative data were subjected to descriptive statistics and chi-squared analysis (p<0.05). The relationship between quantitative and qualitative data was evaluated using Spearman's rho correlation (p<0.05). Results: There was a high prevalence of TMD symptoms, anxiety, and depression in the participants, resulting in association between gender and anxiety symptoms (p=0.029). There was a positive correlation between oral behaviors and TMD symptoms (r=0.364; p<0.001), between oral behaviors and anxiety symptoms (r=0.312; p=0.001), and between oral behaviors and symptoms of depression (r=0.216; p=0.021). Conclusion: Social isolation due to the COVID-19 pandemic has an impact on the prevalence of TMD symptoms, anxiety, and depression.

Purpose: The aim of this study was to evaluate the effect of a surface treatment with Sofreliner primer on tensile bond strength of a resin-based soft liner (Coe-Soft) bonded to a polymethylmethacrylate (PMMA) resin before and after accelerated aging simulated by a thermocycling machine. Material and Methods: One hundred and twenty rectangular specimens of PMMA resin were fabricated with 10 × 10 mm² of cross-section and 40 mm of height. The resin-based soft liner was positioned between two PMMA resin specimens. The specimens were divided randomly into 6 groups (n = 10) according to the surface treatment and accelerated aging cycles (0, 500 and 1000). After accelerated aging, specimens were submitted to tensile bond strength test. The fractures were classified as adhesive, cohesive or both. Results: Most failures were classified as cohesive (p = 0.025) and there was an increase on the mean values of tensile bond strength for group with primer application regardless the cycles of accelerated aging, and also an increase along thermocycling periods. The scanning electronic microscopy was used to illustrate the types of failures and the effect of primer application on PMMA acrylic resin surface. Conclusion: The primer application associated with resin-based soft liners is clinically viable, once this treatment strategy provides a reliable adhesion.