Abstract Nucleotide excision repair pathway (NER) is an essential mechanism for single-strand breaks (SSB) repair while xeroderma pigmentosum family (XPA to XPG) is the most important system to NER. Myelodysplastic syndrome (MDS) is a heterogeneous hematological cancer characterized by cytopenias and risk of acute myeloid leukemia (AML) transformation. MDS pathogenesis has been associated with problems of DNA repair system. This report aimed to evaluate NER polymorphisms (XPA rs1800975, XPC rs2228000, XPD rs1799793 and XPF rs1800067) in 269 MDS patients of different populations in Latin America (173 Brazilian and 96 Argentinean). Genotypes were identified in DNA samples by RT-qPCR using TaqMan SNP Genotyping Assay. Regarding rs1799793 polymorphism of XPD for Brazilian population, the heterozygous genotype AG presented a high odds ratio (OR) to have a normal karyotype (p= 0.012, OR=3.000) and the mutant homozygous genotype AA was associated to a high OR of AML transformation (p= 0.034, OR=7.4). In Argentine population, the homozygous mutant AA genotype of rs1800975 polymorphism of XPA was associated with an increased odd to have hemoglobin levels below 8g/dL (p= 0.013, OR=10.000) while for the rs1799793 polymorphism of XPD, the heterozygous AG genotype decreased OR to be classified as good (p< 0.001, OR=9.05 × 10−10), and intermediate (p< 0.001, OR=3.08 × 10−10), according to Revised-International Prognostic Scoring System. Regarding the rs1800067 polymorphisms of XPF, the homozygous mutant AA genotype showed a decreased OR to be classified as good (p< 0.001, OR=4.03 × 10−13) and intermediate (p< 0.001, OR=2.54 × 10−13). Our report reinforces the heterogeneity of MDS and demonstrates the importance of ethnic differences and regional influences in pathogenesis and prognosis of MDS. (NER singlestrand single strand SSB (SSB XPG (MDS (AML rs rs2228000 rs179979 26 173 (17 9 Argentinean. Argentinean . Argentinean) RTqPCR RT qPCR Assay population (OR p= p (p 0012 0 012 0.012 OR=3.000 OR3000 3 000 0034 034 0.034 OR=7.4. OR74 OR=7.4 7 4 OR=7.4) rs180097 8gdL gdL 8g dL g 0013 013 0.013 OR=10.000 OR10000 10 p< 0001 001 0.001 OR905 05 OR=9.0 10−10, 1010 10−10 , 10−10) OR308 08 OR=3.0 RevisedInternational Revised International System rs180006 OR403 03 OR=4.0 10−13 1013 13 OR254 2 54 OR=2.5 10−13. rs222800 rs17997 17 (1 01 0.01 OR=3.00 OR300 00 003 0.03 OR7 OR=7. rs18009 OR=10.00 OR1000 1 0.00 OR90 OR=9. 101 10−1 OR30 OR=3. rs18000 OR40 OR=4. OR25 5 OR=2. rs22280 rs1799 ( 0.0 OR=7 rs1800 OR=10.0 OR100 OR9 OR=9 10− OR3 OR=3 OR4 OR=4 OR2 OR=2 rs2228 rs179 0. OR= rs180 OR=10. OR10 rs222 rs17 rs18 OR=10 OR1 rs22 rs1 OR=1 rs2

The solidification process of Ti52-xNi38Cu10Nbx alloys was evaluated using the CALPHAD method and microstructural analyses of as-cast alloys with Nb additions of x = 4, 6, 8 and 10 at%. Both in Scheil calculator and structural analyses, the observed phases were TiNi, β-Nb/Ti, and Ti2Ni. TiNi is the matrix phase, and it presented similar amounts of Ti and Ni with varying Nb contents. Enrichments of Ti content and depletion of Ni are expected in the liquid with the solidification of this phase. Formation of Ti2Ni and β-Ti is related to the excess of Ti. Increasing Nb content hinders the formation of Ti2Ni, favoring β-Ti. In turn, Ni depletion and Nb accumulation led to the TiNi/β-Nb eutectic. In the intermetallic phases, coherent ratios were obtained when Cu was considered a substitute for Ni, and Nb, for Ti. Ti52xNi38Cu10Nbx TixNiCuNbx Ti52 xNi38Cu10Nbx xNi Nbx ascast as cast 4 6 1 at at% βNb/Ti, βNbTi β Nb/Ti, β-Nb/Ti phase contents βTi βTi. turn TiNi/βNb TiNiβNb TiNi/β eutectic Ti5 xNiCuNbx βNb βNb/Ti NbTi Nb/Ti TiNiβ

Resumo O objetivo deste trabalho foi estimar os parâmetros genéticos de genótipos de mandioca (Manihot esculenta) cultivados em campo, bem como a divergência genética entre eles, para identificar quais apresentam maior resistência à antracnose e à bacteriose. Foram realizados três experimentos independentes, tendo-se avaliado 133 acessos e nove cultivares comerciais de mandioca distribuídos em cinco blocos, com cinco plantas por parcela, em cada experimento. No primeiro experimento, as plantas foram submetidas à inoculação de Xanthomonas phaseolis pv. manihotis (bacteriose). No segundo, as plantas foram submetidas à inoculação de Colletotrichum gloeosporioides f. sp. manihotis (antracnose). No terceiro, realizado em delineamento de blocos aumentados e sob ocorrência natural das doenças, foram feitas avaliações visuais das plantas por escala de notas. A herdabilidade foi utilizada como parâmetro genético, e o método de grupos de pares não ponderados com média aritmética foi aplicado para determinação de divergência genética e agrupamento. No terceiro experimento, detectaram-se diferenças genéticas entre os acessos, que foram avaliados quanto à área abaixo da curva de progressão da doença (AUDPC) para antracnose e bacteriose. No primeiro e no terceiro experimento de bacteriose, as chances de sucesso na seleção de acessos resistentes são maiores, em razão dos altos valores de herdabilidade obtidos. Os acessos BGM-1170 e BGM-1134 mostram as menores médias de AUDPC e são considerados resistentes à antracnose e à bacteriose.

Abstract The objective of this work was to estimate the genetic parameters of cassava (Manihot esculenta) genotypes cultivated in the field, as well as the genetic divergence between them, in order to identify which ones show a greater resistance to anthracnose and bacteriosis. Three independent experiments were carried out, evaluating 133 accessions and nine commercial cultivars of cassava distributed in five blocks, with five plants per plot in each experiment. In the first experiment, the plants were subjected to inoculation with Xanthomonas phaseoli pv. manihotis (bacteriosis). In the second, the plants were subjected to inoculation with Colletotrichum gloeosporioides f. sp. manihotis (anthracnose). In the third, carried out in an augmented block design and under naturally occurring diseases, visual evaluations of the plants were performed using a rating scale. Heritability was used as a genetic parameter, and the unweighted pair group method with arithmetic mean was applied to determine genetic divergence and clustering. In the third experiment, genetic variability was detected among accessions, which were evaluated for the area under the disease progress curve (AUDPC) for anthracnose and bacteriosis. In the first and third experiments of bacteriosis, the chances of success in the selection of resistant accessions are higher due to the high heritability values obtained. The BGM-1170 and BGM-1134 accessions show the lowest mean for AUDPC and are considered resistant to anthracnose and bacteriosis.

RESUMO: O objetivo foi avaliar os efeitos das doses anuais de 100 e 200 kg ha-1 de nitrogênio (N) sobre as características morfogênicas e estruturais do capim-ipyporã, em lotação intermitente durante as estações do ano. O delineamento experimental foi em blocos ao acaso, com dois tratamentos e três repetições de área. Os pastos de capim-ipyporã foram submetidos ao pastejo por bovinos de corte. Foram avaliadas as características morfogênicas e estruturais do dossel forrageiro por meio da técnica de perfilhos marcados. Também foi avaliado o acúmulo de forragem e a densidade populacional de perfilhos (DPP). Foi observada interação significativa (P < 0,05) das doses de N e estações do ano para o período de descanso (PD), duração de vida das folhas (DVF), filocrono, taxa de alongamento de colmos (TAlC) e comprimento final das folhas (CFF). Durante o inverno, o PD foi menor (40 vs 50 dias) nos pastos adubados com 200 kg ha-1 de N. Em contra partida, no inverno, os pastos adubados com 100 kg ha-1 de N apresentaram maiores valores para DVF, filocrono e TAlC, e menores para o CFF. Não foi observado efeito isolado de doses de N (P > 0,05) para as taxas de acúmulo de forragem; de aparecimento, alongamento e de senescência de folhas, relação folha:colmo e para a DPP. No entanto, o efeito das estações foi significativo para estas variáveis, com os maiores valores observados durante a primavera e verão. O uso de 200 kg ha-1 de N para pastos de capim-ipyporã promove redução da estacionalidade de produção da forrageira.

ABSTRACT: This study examined the effects of annual nitrogen (N) rates of 100 and 200 kg ha-1 on the morphogenetic and structural traits of Ipyporã grass (Brachiaria brizantha × Brachiaria ruziziensis) under intermittent grazing during the seasons of the year. The experiment was laid out in a randomized-block design with two treatments and three area replicates. Ipyporã grass pastures were grazed by beef cattle. Morphogenetic and structural traits of the forage canopy were evaluated using the marked-tiller technique. Forage accumulation and tiller density (TD) were also evaluated. Significant interaction effects (P < 0.05) between N rates and seasons were observed for the rest period, leaf lifespan (LLS), phyllochron, stem elongation rate (SER) and final leaf length (FLL). During winter, the rest period was shorter (40 vs. 50 days) in the pastures fertilized with 200 kg ha-1 N. Conversely, in winter, the pastures fertilized with 100 kg ha-1 N showed higher LLS, SER and phyllochron values, but lower FLL values. There was no isolated effect of N rates (P > 0.05) on forage accumulation rate; leaf appearance, elongation or senescence rates; leaf:stem ratio; or TD. However, the effect of seasons was significant for these variables, with the highest values occurring during spring and summer. The use of 200 kg ha-1 N in Ipyporã grass pastures reduces the seasonality of forage production.

RESUMO Objetivos: analisar se existem alterações miofuncionais orofaciais clínicas e autorreferidas em trombonistas, assim como comparar a atividade elétrica do músculo orbicular da boca antes e após o uso do trombone. Métodos: estudo transversal e observacional, cuja amostra foi composta por 20 universitários trombonistas. Foi utilizado um questionário que investiga algumas particularidades sobre o instrumentista, da Avaliação Miofuncional Orofacial Com Escores Ampliados - AMIOFE-A e análise eletromiográfica do músculo orbicular da boca antes e após execução de uma tarefa com o trombone. Foram calculadas: média, desvio padrão, frequência e porcentagem e utilizou-se o teste t-Student pareado na comparação das médias dos registros eletromiográficos pré e pós-execução do trombone, significância=5%. Resultados: setenta por centro dos trombonistas relataram algum sintoma de alteração miofuncional orofacial, sendo compensações musculares, tensão e dor. Na avaliação miofuncional encontrou-se alteração leve no volume de bochechas (90%) e comissuras labiais com assimetria (60%). Houve redução significante da atividade elétrica do músculo orbicular inferior após a execução de tarefa com trombone (p=0,04), enquanto a do superior permaneceu inalterada. Conclusão: trombonistas apresentam alterações oromiofuncionais clínicas e autorreferidas e diminuição da atividade elétrica do músculo orbicular inferior da boca após uso do trombone.

ABSTRACT Objective: to analyze whether trombonists present orofacial myofunctional changes and compare the electrical activity of the orbicularis oris muscle before and after playing their instrument. Methods: an observational, descriptive, and cross-sectional study. The sample consisted of 20 university trombonists. Data collection involved three steps: application of a questionnaire investigating some peculiarities of trombonists (Orofacial Myofunctional Evaluation with Expanded Scores - OMES-E), and electromyographic analysis of the orbicularis oris muscle before and after performing a piece with the trombone. The mean, standard deviation, frequency, and percentage were calculated, and the paired Student’s t test was used to compare the means of the electromyographic records before and after playing the trombone, at a 5% significance. Results: seventy per cent of trombonists reported some symptom of orofacial myofunctional alteration, namely, muscle compensations, tension, and pain. The myofunctional evaluation showed a mild change in cheek volume (90%) and labial commissure asymmetry (60%). The electrical activity of the lower orbicularis oris muscle decreased significantly after the trombone practice (p = 0.04), while that of the superior orbicularis oris muscle remained unchanged. Conclusion:trombonists show clinical and self-reported oromyofunctional changes as well as decreased electrical activity of the lower orbicularis oris muscle, after playing the trombone.

Abstract The effect of titanium and nitrogen addition on Hadfield steels was investigated. In order to do this, two grades of steels were produced in terms of titanium and nitrogen addition. The final samples had their microstructure characterized and their mechanical properties were evaluated by uniaxial tensile and Charpy impact tests. Furthermore, the wear resistance was measured by dry sand rubber wheel abrasive tests. Microscopy analyses demonstrated that the precipitation of titanium carbonitrides resulted in a coarse microstructure, with large columnar grains coexisting with equiaxed ones. Consequently, these samples presented lower mechanical properties in comparison with the samples without titanium and nitrogen, which showed a finer microstructure. On the other hand, the presence of hard Ti(C, N) precipitates in the microstructure improved the abrasive wear performance of the steel during the abrasive tests.

Heat treatments and geometries have a significant influence on the mechanical behavior of endodontic files. Finite element analyses were performed to verify the effects due to each of these parameters in NiTi files. Two designs and three NiTi atomic structures (resultant from different heat treatments) were selected for this study. The geometries of the ProTaper Next X1 and ProTaper Universal S2 files, and the structures of fully austenitic (conventional superelastic), austenite treated, and fully R-phased were used. The mechanical responses were evaluated under flexion and torsion loading conditions described by ISO 3630-1 specification. According to the results, the design of the X1 file exhibit higher flexibility in comparison to the S2 model. Under torsional loads, S2 showed higher stiffness. The structures of fully austenitic showed the least flexibility under flexion and the highest torsional stiffness. The stress levels reached for the austenitic condition were uppermost. The treated condition that resulted in a fully R-phase file usually presented a higher level of flexibility with lower stress levels, indicating a longer life in fatigue when compared to the other treatments.

Abstract The goal of this paper was to perform the sensory evaluation of strip loin from adult Nelore cattle on the acceptance perspective of the consumer from Aracaju and purchase intention faged beef in different cutting thicknesses. Musculus longissimus thoracis and lumborum were used in three treatments with zero aging time with cutting thickness of 2.5 cm; 21 days aging with cutting thickness of 2.5 cm; and 21 days aging withcutting thickness of 7.5 cm. Eighty random consumers were invited to the sensory evaluationina local supermarket chain. The experimental design was completely randomized with three treatments and eight repetitions. The odour parameter did not differ (P > 0.05) between treatments. There was a difference (P < 0.004) between treatments regarding to flavour. The tenderness and the overall acceptance of the aged samples were higher (P < 0.001) to non-aged samples with no difference (P > 0.05) relative to the thickness. 85% of consumers from the city of Aracaju, based on the assigned scores, elected Musculus longissimus thoracis and lumborum from adult Nelore aged for 21 days a very attractive meat and demonstrated a positive purchase intention, regardless of the cutting thickness.

RESUMO Introdução: o tratamento térmico de fios de aço inoxidável é um procedimento clínico rotineiro adotado por muitos cirurgiões-dentistas para aliviar o estresse causado após a confecção de dobras no fio. O presente estudo avaliou a influência do tratamento térmico em fios de aço inoxidável com secção retangular de 0,016’’ x 0,022’’. Métodos: para análise da estabilidade dimensional, foram avaliadas as dimensões anteriores e posteriores de 40 arcos ortodônticos de aço inoxidável de 0,016’’ x 0,022’’ sem tratamento térmico e 30 dias após o tratamento térmico. Para análise das propriedades mecânicas, 12 segmentos de fio de aço inoxidável com a mesma secção retangular sem tratamento térmico e 30 dias após o tratamento térmico foram analisadas por testes de resistência à tração e tensão. Para verificar se houve diferenças entre as dimensões anteriores e posteriores, os resultados foram analisados pelo teste t de Student. Para comparar a resistência à tração e tensão entre os grupos, foi utilizado o teste ANOVA. O nível de significância adotado foi 95% (p< 0,05). Resultados: o tratamento térmico não interrompeu a expansão dos fios 30 dias após seu preparo, e não houve diferença estatística nos testes de resistência à tração e tensão com e sem o tratamento térmico. Conclusão: pelos achados desse estudo, conclui-se que o comportamento mecânico de fios submetidos a tratamento térmico é semelhante ao de fios de aço não submetidos ao tratamento térmico.

ABSTRACT Introduction: The heat treatment of stainless steel wires is a routine clinical procedure adopted by many dentists in order to relieve the stress caused after performing bends in the archwire. Objective: This study aimed to evaluate the influence of heat treatment of stainless steel archwires with a rectangular section of 0.016 x 0.022’-in. Methods: For analysis of the dimensional stability, the anterior and posterior dimensions of forty 0.016 x 0.022-in stainless steel orthodontic archwires without heat treatment and 30 days after heat treatment were evaluated. For analysis of the mechanical properties, 12 stainless steel wire segments with the same rectangular section without heat treatment and 30 days after heat treatment were tested through tensile strength and strain tests. To evaluate if there were differences between the anterior and posterior dimensions, the results were analyzed by the Student’s t-test. To compare the tensile strength and strain between the groups, the ANOVA test was used. The level of significance adopted was 95% (p< 0.05). Results: The heat treatment did not stop the expansion of archwires 30 days after their preparation, and there was no statistical difference in the tensile strength and strain tests with and without heat treatment. Conclusion: From the findings of this study, it can be conclude that the mechanical behavior of heat-treated stainless steel archwires is similar to that of archwires not subjected to heat treatment.

The ToF-SIMS technique was applied to analyze thin ZrO2 coatings deposited on the surface of a Ni-Ti alloy. Due to its nanostructured nature, these films are difficult to characterize by conventional techniques. ZrO2 coatings were deposited on near equiatomic Ni-Ti wires by pulse electrodeposition. Part of the samples was electrolytically polished before the coating process. The coated samples were then analyzed by ToF-SIMS to evaluate the influence of the deposition time and previous surface electropolishing on the structure of the deposited coating. The results indicate that thicker coatings were produced on the electropolished samples, in comparison with the as-received ones. The best uniformity in thickness was achieved when Ni-Ti samples were previously electropolished followed by ZrO2 electrodeposition for 1200 seconds. Moreover, it was possible to observe by this technique that the inclusions in the Ni-Ti matrix were not entirely covered by the coating.

RESUMO Objetivo: comparar a atividade elétrica dos músculos masseteres bilateralmente de acordo com a presença ou ausência de Disfunção Temporomandibular (TMD) em estudantes universitários com alto grau de ansiedade. Métodos: o estudo foi realizado com 31 acadêmicos de Fonoaudiologia, selecionados aleatoriamente, com idades entre 17 e 32 anos, sendo 61,3% (n=19) do sexo feminino e 38,7% (n=12) do sexo masculino, divididos em dois grupos, sendo o Grupo 1 (G1) composto por 11 estudantes com DTM e o Grupo 2 (G2) formado por 20 estudantes sem DTM. Para investigação da ansiedade os estudantes universitários responderam o Inventário de Ansiedade Traço-Estado (IDATE), e para o diagnóstico de DTM, foram avaliados por meio do protocolo Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD). A avaliação da atividade elétrica muscular considerou os registros nas condições de repouso, Máxima Atividade Voluntária Sustentada (MAVS) e mastigação habitual (MH). Os dados foram analisados por meio do software IBM Statistical Package for Social Sciences (SPSS), versão 22. A estatística analítica foi realizada por meio do teste T de Student para comparação das médias entre os grupos. Os dados foram considerados significantes, quando o p-valor fosse inferior a 5%. Resultados: os graduandos, de ambos os grupos, apresentaram alto nível de ansiedade traço. Foram verificadas diferenças estatisticamente significantes para a porcentagem da atividade elétrica do músculo masseter direito na mastigação, bem como no recrutamento de fibras musculares na mastigação, as quais foram superiores no grupo sem DTM. Conclusões: universitários com DTM e alto grau de ansiedade apresentaram médias de atividade eletromiográfica do músculo masseter inferiores as do grupo sem DTM, na maioria das condições avaliadas, exceto para o masseter esquerdo em repouso e na mastigação.

ABSTRACT Objective: to compare the electrical activity of masseter muscles, bilaterally, according to the presence or absence of Temporomandibular Disorder (TMD) in college students with a high degree of anxiety. Methods: the study was conducted with a randomized sample of 31 Speech Therapy students aged between 17 and 32 years; 61.3% (n = 19) were females and 38.7% (n = 12) were males. They were divided into two groups, Group 1 (G1), comprising 11 students with TMD, and Group 2 (G2), composed of 20 students without TMD. The college students answered the State-Trait Anxiety Inventory (STAI) for anxiety investigation, and were evaluated by the protocol Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) for TMD diagnosis. The evaluation of muscular electrical activity took into account the records in the conditions of rest, Sustained Maximum Voluntary Activity (SMVA) and habitual chewing (HC). The data were analyzed using the version 22 IBM Statistical Package for Social Sciences (SPSS) software. The statistical analysis was performed using Student t test to compare means between groups, considering < 0,05 as the significant p-value. Results: college students, of both groups, presented high levels of anxiety traits. Significant statistical differences were observed on the percentage of electrical activity of right masseter muscle in chewing function, as well as muscle fibers recruitment during chewing, which were higher on the group without TMD. Conclusion: college students with TMD and a high degree of anxiety presented lower means of masseter muscle electromyografic activity during chewing, in most conditions assessed, as compared to volunteers without TMD, except for the left masseter muscle in rest and chewing.

RESUMO: Este estudo buscou identificar componentes principais (CP) que explicam os maiores percentuais de variância total e que melhor caracterizam cabritos mestiços da raça Anglo Nubiana, quanto à medidas morfológicas obtidas in vivo, e na carcaça de 28 animais com 8 meses de idade. Foram conduzidas duas análises de componentes principais, sendo uma para 19 características de carcaça e outra para seis características morfométricas in vivo. Os cinco primeiros CP explicaram 82,54% da variância total das 19 características incluídas nessa análise. Estes componentes foram chamados de: CP1 - Tamanho da Carcaça, CP2 - Condição Corporal, CP3 - Largura da Carcaça, CP4 - Profundidade do Tórax e, CP5 - Comprimento do Pernil. Os dois primeiros componentes principais das morfometrias obtidas in vivo explicaram 78,86% da variância total e foram chamados de CP1 - Tamanho in vivo e CP2 - Conformação in vivo.

ABSTRACT: This study aimed to identify the principal components (PC) that explain the highest percentages of total variance and best characterize the in vivo and carcass morphologies of Anglo-Nubian crossbred goats. Nineteen carcass morphometric traits and six in vivo morphometric traits were measured in 28 kids at eight months of age. Principal component analysis indicated that five PC were able to explain 83.57% of the total variance in the 19 original carcass traits. Those components were termed PC1-Carcass Size, PC2 - Body Condition, PC3-Carcass Width, PC4-Chest Depth, and PC5 - Hindquarter. For in vivo morphometric traits, the first two principal components explained 78.86% of the total variance. These components were called PC1-In vivo Size and PC2-In vivo Conformation.

For the biomedical application of NiTi alloys, an excellent surface finishing process is required to guarantee high corrosion resistance and biocompatibility, eliminating the allergenic and toxic effects associated with the release of nickel ions in the body. Electropolishing is a process that can reduce surface imperfections and form a thin protective layer of TiO2, even in complex-shaped devices. The main objective of our study was to find and report suitable parameters for electrolytic polishing of NiTi wires, in both the superelastic and shape memory states. The results indicate that electropolishing in a 3.5 mol•L-1 methanolic H2SO4 electrolyte at 20ºC can effectively reduce surface roughness, remove superficial nickel-rich layers and improve corrosion resistance for austenitic and martensitic NiTi alloys.

The strain hardening behavior of an AISI 304 stainless steel at different temperatures was investigated in this work. Specimens were tensile tested up to rupture at temperatures of 25, 50, 75, 100, 125 and 150 ºC by using a universal testing machine with an attached environmental test chamber. The induction of martensite by strain was assessed by X-ray diffraction and Rietveld refinement. The resultant fracture morphologies were analyzed by scanning electron microscopy. The changes in the mechanical properties as a function of temperature were evaluated through the variations in the stress-strain curve and the strain hardening behavior was described in terms of strain hardening rate, instantaneous strain hardening exponent and Crussard-Jaoul analysis. Six strain hardening stages were detected at lower temperatures, transitioning into three strain hardening stages at higher temperatures. Fracture surface was ductile at all studied temperatures, although differences in terms of dimple and void morphology were observed.

O Método Rietveld foi utilizado para investigar a estrutura de três fases intermetálicas Fe-Zn e quantificar sua proporção. As fases zeta, delta e gama foram obtidas com sucesso pelo processo de sinterização. Uma mistura simples das três fases intermetálicas foi realizada com uma porcentagem de massas conhecida e seu padrão DRX foi coletado e analisado pelo Método Rietveld. Uma diferença de 14% entre os padrões DRX simulado e experimental foi encontrada, indicando um ajuste satisfatório. Uma pequena diferença entre os valores dos parâmetros de rede calculados e aqueles contidos nos cartões ICSD foi observada. Por conta do bom ajuste, as porcentagens de fase da mistura calculadas concordaram de maneira próxima com as porcentagens experimentais. Logo, concluiu-se que o Método Rietveld é um método confiável para quantificar as fases presentes em aços galvannealed e que a mesma metodologia aplicada nesse estudo laboratorial pode ser aplicada em chapas industriais.

The Rietveld Method was used to investigate the structure of three Fe-Zn intermetallic phases and to quantify their proportion. The zeta, delta and gamma phases were successfully obtained by the sintering process. A simple mixture of the three intermetallic phases was made with a known mass percentage and the XRD pattern of this mixture was collected and analyzed by the Rietveld Method. A difference of 14% between the simulated and the experimental XRD patterns was found, indicating a satisfactory fitting. Slightly different lattice parameters from those given in the ICSD cards were observed. Because of the good fitting, the calculated phase percentages of the mixture agreed closely with the real ones. Thus, it was concluded that the Rietveld Method is a reliable method to quantify the phases in galvannealed steel sheets and the same methodology applied in this laboratorial study can be applied to industrial sheets.