Abstract Titanium dioxide nanotubes (TiO2-nts) were incorporated into a glass ionomer cement (GIC) with improved mechanical properties and antibacterial activity. The aims of the present in vitro study were to define the elemental characterization, aluminum (Al) release rate, and initial working time for GIC reinforced with TiO2-nts, in an experimental caries model. TiO2-nts were incorporated into GIC powder components at 5% by weight, and compared with unblended GIC. Experimental approaches used energy-dispersive spectrometry (EDS), atomic absorption spectrophotometry (AAS), and brightness loss to define surface element properties, Al release rates, and initial working time, respectively. Statistical analysis was performed by 2-way ANOVA, Tukey’s test, generalized linear models, and Student’s t test (a = 0.05). EDS data analysis revealed that TiO2-nts incorporated into GIC had no significant impact on the typical elemental composition of GICs in an in vitro caries model. Regarding the demineralizing solution, GIC with TiO2-nt significantly decreased the Al release rate, compared with the control group (p < 0.0001). Moreover, TiO2-nt incorporated into GIC did not alter the initial working time of the material (p > 0.05). These findings add information to our scientific body of knowledge concerning the potential impact of TiO2-nt on the performance of conventional GICs.

Abstract This in vitro study evaluated the impact of TiO2 nanotubes (n-TiO2) incorporated into glass ionomer cement (GIC) on Streptococcus mutans (S. mutans) characteristics at cellular and molecular levels. n-TiO2, synthesized by the alkaline method (20 nm in size), was added to Ketac Molar EasyMix® at 0%, 3%, 5%, and 7% by weight. S. mutans strains were cultured on GIC disks with addition or not of n-TiO2 for 1, 3, and 7 days and the following parameters were assessed: inhibition halo (mm) (n=3/group); cell viability (live/dead) (n=5/group); cell morphology (SEM) (n=3/group); and gene expression by real-time PCR (vicR, covR, gtfB, gtfC, and gtfD) (n=6/group). The data were analyzed by the Kruskal-Wallis test, repeated-measures ANOVA or two-way ANOVA, and Tukey’s and Dunn’s post-hoc tests (α=0.05). The agar diffusion test showed a higher antibacterial property for 5% n-TiO2 compared with 3% and 7% (p<0.05) with no effect of time (1, 3, and 7 days). The cell number was significantly affected by all n-TiO2 groups, while viability was mostly affected by 3% and 5% n-TiO2, which also affected cell morphology and organization. Real-time PCR demonstrated that n-TiO2 reduced the expression of covR when compared with GIC with no n-TiO2 (p<0.05), with no effect of time, except for 3% n-TiO2 on vicR expression. Within-group and between-group analyses revealed n-TiO2 did not affect mRNA levels of gtfB, gtfC, and gtfD (p>0.05). Incorporation of n-TiO2 at 3% and 5% potentially affected S. mutans viability and the expression of key genes for bacterial survival and growth, improving the anticariogenic properties of GIC.

Resumo Introdução Para proteger pacientes e profissionais de doenças, o uso de equipamentos de proteção individual é obrigatório, principalmente no ambiente odontológico. O risco de microperfurações das luvas é iminente ao usar instrumentos cortantes ou na tentativa de limpar as luvas durante longos procedimentos clínicos. Objetivo Este estudo avaliou a integridade das luvas cirúrgicas e de procedimento antes do uso clínico e esclareceu se o atrito com a solução desinfetante modifica a morfologia e integridade da superfície. Material e método Amostras de luvas de quatro marcas diferentes foram divididas em dois grupos: (1) Luvas cirúrgicas (n = 260) e (2) Luvas descartáveis não estéreis (n = 260). As luvas foram cortadas e colocadas em arco de Ostby, de modo que três soluções - água destilada, etanol 70 °, etanol 96 ° foram esfregadas com um cotonete. Após 30s, 5, 10 e 15 minutos de fricção das soluções, as amostras foram verificadas utilizando um microscópio eletrônico de varredura. Os tamanhos dos poros foram medidos pelo software Image J. Resultado Independentemente das marcas, todas as luvas foram significativamente afetadas por soluções e períodos de avaliação. Em geral, maiores alterações foram evidenciadas com o uso do etanol 70° e 96°, e maiores diâmetros dos poros foram observados quando comparados à água destilada. Conclusão Esfregar soluções desinfetantes aumenta o tamanho dos poros das luvas e o tempo influenciou negativamente sua qualidade.

Abstract Introduction Personal protective equipment is mandatory to protect patients and professionals from diseases, especially in the dental environment. The risk of gloves micro-perforations is imminent when using sharp instruments or cleaning them up during lengthy clinical procedures. Objective This study evaluated the integrity of sterile and non-sterile gloves before clinical use and clarified whether friction with disinfectant solution modifies surface morphology and integrity. Material and method Samples of gloves from four different brands were divided into two groups: (1) Sterile surgical gloves (n=260) and (2) Non-sterile gloves (n=260). They were scissored and placed in Ostby’s arch so that three solutions - distilled water, ethanol 70°, ethanol 96° - were rubbed with a cotton swab. After 30s, 5, 10, and 15 minutes of solution rubbing, samples were verified by a Scanning Electron Microscope. The pore sizes were measured by Image J software. Result Regardless of the brands, all gloves have been significantly affected by solutions and assessment periods. In general, remarkable changes were evident with ethanol 70° and 96°, and higher pore diameters were observed compared to distilled water. Conclusion Rubbing disinfectant solutions increases gloves’ pores sizes, and time negatively influenced its quality.

Resumo Introdução Muita publicidade sobre enxaguatórios bucais é veiculada em todos os meios de comunicação apelando para o efeito anti-placa e prestando um desserviço à comunidade. Grande quantidade de enxaguatórios bucais está disponível no mercado e estes diferem em suas composições e eficácia antimicrobiana. Objetivo Neste estudo, avaliamos a atividade antimicrobiana de 35 enxaguatórios bucais amplamente disponíveis contra espécies bacterianas envolvidas na iniciação do biofilme dental - Streptococcus gordonii, Streptococcus mitis, Streptococcus oralis, Streptococcus salivarius e Streptococcus sanguinis. Material e método A Concentração Inibitória Mínima (CIM) e a Concentração Bactericida Mínima (CBM) dos enxaguatórios avaliados foram determinadas de acordo com os protocolos do Clinical & Laboratory Standards Institute. Os dados foram submetidos ao teste Kruskal-Wallis e Mann-Whitney post hoc (α=0,05). Resultado Aproximadamente 70% dos enxaguatórios bucais alcançaram alta atividade antibacteriana e 30%, baixa atividade antibacteriana contra todas as espécies testadas. O enxaguatório bucal mais ineficaz mostrou atividade antibacteriana (CIM) na diluição de 1:1, enquanto a mais eficaz mostrou atividade mesmo na diluição de 1:2048, o que pode implicar em efeito prolongado na boca. Cerca de 51% dos enxaguatórios bucais apresentaram atividade bactericida, e verificou-se que formulações contendo cloreto de cetilpiridíneo ou digluconato de clorexidina estavam associados à maior atividade. Conclusão A maior parte - mas não todos – dos enxaguatórios bucais comercialmente disponíveis são eficazes na inibição de colonizadores iniciais de superfícies dentárias in vitro.

Abstract Introduction Much advertising in mouthwash is conveyed in all media appealing to the anti-plaque effect and rendering a disservice to the community. Mouth rinses are available over-the-count and differ on their compositions and antimicrobial effectiveness. Objective In this study, we evaluated the antimicrobial activity of 35 widely available mouth rinses against bacterial species involved in initiation of dental biofilm – Streptococcus gordonii, Streptococcus mitis, Streptococcus oralis, Streptococcus salivarius, and Streptococcus sanguinis. Material and method The Minimum Inhibitory Concentration (MIC) and the Minimum Bactericidal Concentration (MBC) of the evaluated mouth rinses were determined according to the Clinical & Laboratory Standards Institute protocols. Data were submitted to Kruskal-Wallis test and Mann-Whitney post hoc (α=0.05). Result About 70% of the mouth rinses achieved high antibacterial activity and 30%, a low antibacterial activity against all the species tested. The most ineffective mouth rinse showed antibacterial activity (MIC) at 1:1 dilution, while the most effective showed activity even at 1:2048 dilution, which may imply prolonged effect in the mouth. About 51% of mouth rinses showed bactericidal activity, and it was verified that cetylpyridinium chloride or chlorhexidine digluconate containing in the formulation were associated with the highest activity. Conclusion Most - but not all - mouth rinses commercially available are effective in inhibiting in vitro initial colonizers of dental surfaces.

RESUMO Objetivo: Avaliar a ação antibacteriana de quatro formulações de pastas de hidróxido de cálcio contra microrganismos comumente encontrados em canais radiculares infectados. Métodos: Para avaliar a ação antibacteriana, através do método de difusão em ágar, foram preparadas pastas de hidróxido de cálcio a partir de sua forma pró-análise dispersa em quatro veículos distintos: água destilada, paramonoclorofenol canforado, propilenoglicol e Otosporin®, testando o potencial antibacteriano destas sobre cepas de Staphylococcus aureus, Bacillus subtilis e Enterococcus faecalis. Após o período de incubação, foi verificada a pre¬sença ou não de halos de inibição e seus respectivos tamanhos em três momentos: 24h, 48h e 72h. Com os dados, foi obtida uma mediana das quatro placas e o valor encontra¬do submetido à análise estatística não paramé¬trica Kruskall-Wallis, com pós-testes de Mann-Whitney e penalização de Bonferroni, ao nível de significância de 5%. Resultados: Apenas nas pastas com veículos paramonoclorofenol canforado e Otosporin foi observado a formação de halos de inibição significativos, com medianas de 8,0mm. Sobre as cepas de Enterococcus faecalis, somente a pasta com veículo paramonoclorofenol canforado foi observado formação de halo de inibição significativo, com mediana de 3,0mm. Conclusão: Os veículos Otosporin e PMCC possibilitam maior potencial antimicrobiano ao hidróxido de cálcio frente às bactérias estudadas. No entanto, somente a associação Ca(OH)2 e PMCC foi efetiva contra todas as cepas, e assim pode ser considerada como a formulação de pasta de maior efetividade antimicrobiana neste estudo.

ABSTRACT Objective: To evaluate the antibacterial activity of four formulations of calcium hydroxide paste against microorganisms commonly found in infected root canals. Methods: To evaluate antibacterial activity through the agar diffusion method, pastes of calcium hydroxide were made from its pro-analysis form, diffused into four separate vehicles: distilled water, camphorated p-monochlorophenol, propylene glycol and Otosporin®, testing the antimicrobial activity of these on strains of Staphylococcus aureus, Bacillus subtilis and Enterococcus faecalis. After the incubation period, the presence or otherwise of inhibition zones were observed and their sizes in three stages: 24h, 48h and 72h. With this data, the median between the four dishes was obtained and the consequent value was submitted to Kruskal-Wallis nonparametric statistical analysis, with post-tests of Mann-Whitney and Bonferroni correction, at a significance level of 5%. Results: Only pastes with camphorated p-monochlorophenol and Otosporin vehicles caused the formation of significant inhibition zones, with medians of 8.0 mm. Against the strains of Enterococcus faecalis, only pastes with the camphorated p-monochlorophenol vehicle resulted in the formation of significant inhibition zones, with a median of 3.0 mm. Conclusion : Otosporin and CMCP vehicles provide greater antimicrobial potential to calcium hydroxide against the studied bacteria. However, only the Ca(OH)2 and CMCP combination was effective against all the strains, and can thus be regarded as the paste formulation with the greatest antimicrobial effectiveness in this study.

Abstract Aim: To evaluate the clinical performance of a composite resin (CR) and a resin-modified glass-ionomer cement (RMGIC) for the treatment of abfraction lesions. Methods: Thirty patients with abfraction lesions in at least two premolar teeth were selected and invited to participate in this study. All restorations were made within the same clinical time frame. One tooth was restored with CR Z100TM (3M, St. Paul, MN, USA), and the other was restored with RMGIC VitremerTM (3M). The restorations were assessed immediately and 1, 6 and 12 months after the restoration, using modified US Public Health Service (USPHS) criteria: marginal integrity, marginal discoloration, wear, retention, secondary caries and hypersensitivity. The statistical analysis was based on Friedman ANOVA test and Mann-Whitney test, considering p<0.05 for statistical significance. Results: Both materials demonstrated satisfactory clinical performance after one year. In the individual analysis of each material, there was a significant difference (p<0.05) in the criteria marginal integrity and wear, for both CR and RMGIC. RMGIC exhibited more damage one year after the restoration. Comparing both materials, it was found a significant difference only for marginal discoloration, while the RMGIC restorations showed the worst prognosis after a year of evaluation. There was no significant difference in the number of retentions, caries or hypersensitivity between CR and RMGIC. Conclusions: It was concluded that CR exhibited the best clinical performance according to the cost-effectiveness and evaluation criteria used in this study.