Resumo Este estudo avaliou a resistência de união (RU) de sistemas de pinos de fibra de vidro convencionais, anatomizados, ajustáveis e CAD/CAM. Quarenta raízes de caninos superiores foram enfraquecidas, tratadas endodonticamente e divididas em quatro grupos (n=10). Um slice de cada terço do canal radicular (cervical, média e apical) foi submetido ao teste de push-out e o padrão de falha foi analisado posteriormente. O slice mais apical foi submetido à análise da espessura da linha de cimentação por microscopia eletrônica de varredura (MEV). Os dados referentes à RU e espessura da linha de cimentação foram submetidos ao teste de normalidade de Shapiro-Wilk seguido dos testes de variância e Tukey. O padrão de falha foi expresso em porcentagem e submetido ao teste qui-quadrado. O pino convencional apresentou menor RU em comparação aos demais pinos de fibra de vidro (p<0,05). Todos os pinos de fibra de vidro apresentaram maior percentual de falhas adesivas à dentina. A MEV evidenciou linha de cimentação mais espessa para o pino convencional em relação aos demais grupos (p<0,05), além de lacunas e espaços vazios no material restaurador. Os pinos de fibra de vidro anatomizados, ajustáveis e fresados em CAD/CAM demonstraram RU superior e melhor adaptação à dentina radicular em comparação com o pino de fibra de vidro convencional. (RU convencionais anatomizados CADCAM CAD CAM enfraquecidas n=10. n10 n n=10 . 10 (n=10) cervical, cervical (cervical pushout push out posteriormente MEV. (MEV) ShapiroWilk Shapiro Wilk Tukey quiquadrado. quiquadrado qui quadrado. quadrado qui-quadrado p<0,05. p005 p p<0,05 0 05 (p<0,05) p<0,05, , restaurador n1 n=1 1 (n=10 (MEV p00 p<0,0 (p<0,05 n= (n=1 p0 p<0, (p<0,0 (n= p<0 (p<0, (n p< (p<0 (p< (p

Abstract This study evaluated the bond strength (BS) of conventional, anatomized, adjustable, and CAD/CAM fiberglass post systems. Forty maxillary canine roots were weakened, endodontically treated, and divided into four groups (n=10). A slice from each of the three sections (cervical, middle, apical) of the root canal was subjected to the push-out test and the failure pattern was subsequently analyzed. The most apical slice was subjected to analysis of the cementation line thickness by scanning electron microscopy (SEM). Data regarding the BS and cementation line thickness were subjected to the Shapiro-Wilk normality test followed by the variance and Tukey tests. Data failure patterns were expressed as a percentage and submitted to the chi-square test. Conventional fiberglass posts had the lowest BD compared to the other fiberglass posts (p<0.05). All fiberglass posts exhibited a higher percentage of adhesive failures to dentin. The SEM demonstrated a thicker cementation line for the conventional post compared to the other groups (p<0.05), as well as gaps and voids in the cementing material. The anatomized, adjustable, and CAD/CAM milled fiberglass post systems demonstrated a superior BS and adaptation to the root dentin compared to the conventional fiberglass post. (BS anatomized adjustable CADCAM CAD CAM weakened treated n=10. n10 n n=10 . 10 (n=10) cervical, cervical (cervical middle pushout push out analyzed SEM. (SEM) ShapiroWilk Shapiro Wilk tests chisquare chi square p<0.05. p005 p p<0.05 0 05 (p<0.05) p<0.05, , material n1 n=1 1 (n=10 (SEM p00 p<0.0 (p<0.05 n= (n=1 p0 p<0. (p<0.0 (n= p<0 (p<0. (n p< (p<0 (p< (p

Abstract This study aimed to analyze the root and root canal morphology of mandibular first and second molars using CBCT images. A total of 2,400 mandibular molars exams were selected from 600 patients aged between 18 and 75 years. The number of roots, number of root canals, and root canal configuration according to the Vertucci classification were verified. Overall, 94.92% of mandibular first molars and 90.17% of mandibular second molars had two separate roots. Among the biradicular molars, the first molars showed a greater incidence of type IV canals in the mesial root and type I in the distal root. In the second molars, the most common canal form was type IV in the mesial root and type I in the distal root. In the triradicular molars, the type IV and type I configurations were the most common in the mesial root of the first molar and second molar, respectively. In both triradicular molars, there was a prevalence of type I canal in the distal and DL roots. Statistical analysis was performed at a significance level of 0.05. The number of roots was correlated with gender (Spearman test), and the canal's configuration with gender and bilaterality (Wilcoxon test). The subpopulation studied has a high incidence of bilateral symmetry and mandibular molars with two roots with two distinct mesial canals and one distal canal. The bilateral configuration is possible to estimate the number of canals, especially in images that are difficult to visualize, such as atresic canals.

Abstract This study evaluate the maxillary anterior teeth anatomy by micro-computed tomography (μCT), about relevant characteristic for endodontic treatment planning. Fifty maxillary central incisors (MCI), lateral incisors (MLI) and maxillary canines (MC) were scanned using a μCT device. Two and three-dimensional parameters at 1 to 5mm distance to the apical foramen, external anatomic characteristics of the teeth and qualitative analysis of the internal anatomy was performed. The roundness and form factor values revealed a circular canal in the apical third in the MCI and MC, whereas MLI showed flattening in the apical third. The linear regression test indicated a progressive increase in the major/minor diameters in the five mm assessed (p < 0.001). The 3D analysis revealed the greatest volume and surface area in MC. The SMI showed a cylindrical geometry of root canals. All teeth presented Vertucci’s type I root canal configuration. A mild curvature was prevalent in the MCI (45%) and a moderate one in the MLI (50%) and MC (50%). Palatal shoulder volume was smaller in the MLI (11.46 ± 3.09) than in the MCI (14.15 ± 3.85) and MC (13.95 ± 2.55). The most common exit of main apical foramen was in a central (22%), distolingual (30%) and mesiobuccal position (28%) for MCI, MLI and MC, respectively. Radicular grooves were observed in 2% of MCI and 4% of MLI. Two and three-dimensional data obtained by μCT allowed to observe morphological characteristics of internal/external anatomy of the maxillary anterior teeth. These characteristics may affect the endodontic treatment planning.

Abstract Chitosan is a natural, biocompatible chelating substance with potential for dental use. This study compared the effects of final canal irrigation with chitosan and EDTA on dentin microhardness, sealer dentin tubules penetration capacity, and push-out strength. Methodology: Fifty canine roots were distributed according to the final irrigation protocol (n=10): G1- 15% EDTA with conventional irrigation; G2- 15% EDTA with Endovac; G3- 0.2% chitosan with conventional irrigation; G4- 0.2% chitosan with Endovac; and G5- without irrigation. Specimens were obturated (AH Plus) and sectioned in 3 slices per root third. The first slice was used for microhardness and sealer penetration assessments under a laser confocal microscope. The second was utilized in a push-out strength test. The third slice was discarded. Data were analyzed using 2-way ANOVA and Tukey's post hoc test (α<0.05). Failure mode was determined at x40 magnification. Results: Microhardness reduction was more significant in groups G2 and G4 (p<0.05). Sealer penetration through dentin was significantly greater in group G2 (p<0.05). There was no significant difference between groups G1, G3, and G4 (p>0.05). In general, all experimental groups presented similar bond resistance (p>0.05) that significantly differed from the control (p<0.001). Mixed type failures were predominant. Conclusions: In general, 0.2% chitosan and 15% EDTA solutions act in a similar manner with regard to the variables studied. The use of Endovac potentiates the effect of these solutions.

Resumo Estudou-se a morfologia, microdureza e permeabilidade dentinária da furca de pré-molares superiores. Dez pré-molares tiveram a porção oclusal da coroa e os terços radiculares médio e apical removidos. Cortou-se longitudinalmente o remanescente e delimitou-se a furca. As hemi-secções foram distribuídas em dois grupos. Num (n=10), mediu-se a microdureza nas regiões vestibular, central e palatina, nas camadas externa, média e interna e nas porções vestibular e palatina adjacentes à furca. Utilizou-se dureza Knoop, carga de 10 g por 15 s. Os dados foram analisados pelo teste ANOVA e Tukey-Kramer (a=0.05). No outro grupo (n=10) utilizou-se microscopia confocal para estudo da morfologia da dentina. Outros 10 espécimes foram instrumentados com Protaper e NaOCl a 1% e imersos em sulfato de cobre a 10% para análise da permeabilidade. Após preparo histológico os espécimes foram analisados em fotomicroscópio. Não houve diferença significante (p>0,05) entre a microdureza das regiões vestibular (39,9±3,1), central (39,5±4,4) e palatina (39,7±5,0), nem entre essas regiões e as adjacentes vestibular (39,1±5,8) e palatina (39,7±5,8) (p>0,05). A camada interna (42,3±3,7) é mais dura que a externa (37,1±3,9) (p<0,05). Há uma tendência dos canalículos calcificarem no sentido da camada externa para a interna. A porcentagem de área corada foi de 12,45±2.0 e restrita à camada externa. As regiões vestibular, central e palatina da furca, bem como as adjacentes vestibular e palatina apresentaram microdureza semelhante entre si. A camada interna apresentou-se mais dura que a externa. Os canalículos dentinários eram sinuosos e se entrelaçaram em direção à camada média. A penetração de corantes se restringiu à camada externa.

Abstract The morphology, microhardness and dentin permeability of the furcation region of maxillary premolars were evaluated. Ten premolars were cut lengthwise and the furcation region was delimited. In one group (n=10) microhardness was measured in the buccal, central and palatal regions, in the outer middle and inner layers of the furcation, and in the buccal and palatal regions adjacent to the furcation. Knoop hardness was tested with 10 g load for 15 s. Data were analyzed statistically by ANOVA and Tukey-Kramer test (a=0.05). In the other group (n=10) confocal microscopy was used to study dentin morphology. Other 10 specimens were instrumented with ProTaper and immersed in 10% copper sulfate for analysis of permeability under light microscopy. About microhardness, there was no significant difference (p>0.05) among the buccal (39.9±3.1), central (39.5±4.4) and palatal (39.7±5.0) regions of the furcation, or between these regions and the adjacent buccal (39.1±5.8) and palatal (39.7±5.8) regions (p>0.05). The inner layer (42.3±3.7) had significantly higher microhardness (p<0.05) than the outer layer (37.1±3.9). There was a tendency of calcification of the dentinal tubules from the outer towards the inner layer. The percentage of stained area was 12.45±2.0%, restricted to the outer layer. The buccal, central and palatal regions of the furcation as well as the buccal and palatal adjacent regions had similar microhardness values. In conclusion, the inner dentin layer is harder than the outer dentin layer. The dentinal tubules are sinuous and intertwine towards the middle layer. Dye penetration is restricted to the outer layer.

Resumo Avaliou-se a relação anatômica entre dentes posteriores e o soalho do seio maxilar (SSM) por meio da tomografia computadorizada de feixe cônico (TCFC) em 202 exames. A distância entre os ápices radiculares e o SSM, bem como a espessura do osso cortical do SSM próximo dos ápices radiculares e áreas de bifurcação foram medidas. As relações verticais e horizontais do SSM com as raízes dos molares foram classificados em categorias adaptadas a partir dos critérios propostos pelo Kwak et al. (14). A menor distância entre o SSM e os ápices dentários foi observada na raiz mesiovestibular do segundo molar (0,36±1,17 mm) e na raiz palatina do primeiro molar (0,45±1,10 mm), e a maior na raiz vestibular do primeiro pré-molar (5,47±4.43 mm). Diferenças significantes foram observadas entre a distância do SSM e os ápices dentários de primeiros e segundos pré-molares unirradiculares. A espessura da cortical óssea variou de 0,65±0,41 mm na região da raiz mesiovestibular do segundo molar a 1,28±0,42 na raiz vestibular do primeiro pré-molar. As relações vertical e horizontal mais prevalentes foram do tipo II e 2H, respectivamente. As raízes dos molares superiores apresentaram maior proximidade com o SSM. A espessura da cortical óssea do SSM nas regiões mais próximas dos ápices e área de furca foi similar apenas para os pré-molares.

Abstract This study evaluated the anatomical relationship between posterior teeth root apices and maxillary sinus floor (MSF) on 202 cone beam computed tomography (CBCT) exams. The distance between the root apices and the MSF, as well as the MSF thickness of the cortical bone closest to root apices and furcation regions were measured. The vertical and horizontal relationships of the MSF with the molar roots were classified into categories adapted from the criteria proposed by Kwak et al. (14). The shortest distances between MSF and the root apices were observed in the mesiobuccal root of the second molar (0.36±1.17 mm) and the palatal root of the first molar (0.45±1.10 mm) and the widest in buccal roots of the first premolars (5.47±4.43 mm). Significant differences were observed between the distance of MSF to the root apices of single-rooted first and second premolars. The cortical thickness ranged from 0.65±0.41 mm over the mesiobuccal root of the second molar to 1.28±0.42 mm over the buccal root of the first premolar. The most observed vertical and horizontal relationships were type II and 2H, respectively. The maxillary molar roots showed greater proximity to the MSF. The thickness of the MSF cortical bone closest to the apices and furcation regions was found to be similar only for premolars.

Abstract The volume of sealer in the apical 1 mm of teeth filled using different techniques was evaluated by micro-commuted tomography (micro-CT). Sixty-four maxillary central incisors were prepared using NiTi rotary instruments. Teeth were randomly distributed into four groups according to root canal sealers (AH Plus, Endofill, Sealapex, and Sealer 26) and subdivided into two subgroups according to the filling techniques (active and passive lateral condensation; n = 8 each). Subsequently, teeth were examined using the 1174 SkyScan micro-CT device. Images were reconstructed using the NRecon software, and the sealer volume (mm3) in the apical region was analyzed using the two-way ANOVA and post-hoc Student–Newman–Keuls test (α = ٠.٠٥). The lowest volume of sealer was observed in teeth filled with Sealapex (0.100 ± 0.009) and Endofill (0.103 ± 0.010). The highest volume was observed in teeth filled with AH Plus (0.112 ± 0.008) and Sealer 26 (0.109 ± 0.018) (p > 0.05). Regarding the filling technique, a lower sealer volume was observed using the active lateral condensation technique compared with that using the passive lateral condensation technique (0.100 ± 0.010 vs. 0.111 ± 0.012) (p < 0.05). Therefore, the lowest volume of sealer was observed in teeth filled with Sealapex and Endofill using the active lateral condensation technique.

Resumo: O objetivo deste estudo foi avaliar a frequência de raízes, canais radiculares e forames apicais em dentes permanentes humanos por meio de imagens de tomografia computadorizada de feixe cônico (TCFC). Imagens de TCFC de 1.400 dentes de um banco de dados avaliadas anteriormente (1) foram usadas para determinar a frequência do número de raízes, canais radiculares e forames apicais. Em todos os dentes foi realizada avaliação por visualização em planos sagital, axial e coronal. Foram feitas navegações em cortes axiais de 0,1 mm/0,1 mm em sentido cervical para a direção apical, bem como de apical para cervical. Todas as imagens foram avaliadas por dois examinadores. Os dados estatísticos foram analisados, incluindo distribuição de frequência e tabulação cruzada. A maior frequência de quatro canais radiculares e quatro forames apicais foi encontrada em primeiros molares superiores (76%, 33%), seguido de segundos molares superiores (41%, 25%). A frequência de quatro canais radiculares nos primeiros molares inferiores foi de 51%. Primeiros pré-molares inferiores apresentaram dois canais radiculares e dois forames apicais em 29% e 20%, respectivamente. Os incisivos centrais e laterais inferiores e caninos apresentaram dois canais radiculares em 35%, 42% e 22% dos casos, respectivamente. A estratégia de navegação em imagens de TCCB favorece uma melhor identificação de frequência, posição das raízes, canais radiculares e forames apicais em dentes permanentes humanos..

Abstract: The aim of this study was to evaluate the frequency of roots, root canals and apical foramina in human permanent teeth using cone beam computed tomography (CBCT). CBCT images of 1,400 teeth from database previously evaluated were used to determine the frequency of number of roots, root canals and apical foramina. All teeth were evaluated by preview of the planes sagittal, axial, and coronal. Navigation in axial slices of 0.1 mm/0.1 mm followed the coronal to apical direction, as well as the apical to coronal direction. Two examiners assessed all CBCT images. Statistical data were analyzed including frequency distribution and cross-tabulation. The highest frequency of four root canals and four apical foramina was found in maxillary first molars (76%, 33%, respectively), followed by maxillary second molars (41%, 25%, respectively). The frequency of four root canals in mandibular first molars was 51%. Mandibular first premolars had two root canals and two apical foramina in 29% and 20% of the cases, respectively. Mandibular central and lateral incisors and canines presented two root canals in 35%, 42% and 22% of the cases, respectively. The navigation strategy in CBCT images favors a better identification of frequency and position of roots, root canals and apical foramina in human permanent teeth.

Este estudo utilizou microtomografia computadorizada (micro-CT) para avaliar a adaptação do cone de guta-percha no momento da sua seleção, o volume de guta-percha no material obturador, e o volume do material obturador em relação ao canal no limite apical do comprimento de trabalho. Canais radiculares de 20 incisivos centrais superiores foram preparados com instrumentos rotatórios e distribuídos em dois grupos (n=10). A ponta do cone de guta-percha foi plastificada (técnica de impressão térmica apical - TIT) ou não (técnica convencional - TC), e seu ajuste apical foi verificado. O milimetro apical do comprimento de trabalho foi examinado em micro-CT, os canais foram preenchidos com guta-percha e cimento, e novas imagens em micro-CT foram obtidas. Na TC, a guta-percha preencheu 35,83 ± 15,05% do canal no momento da seleção do cone e 38,72 ± 11,64% após a obturação. Na TIT, estes valores foram de 23,14 ± 7,74% e 26,98 ± 20,40%, respectivamente. O volume de guta-percha no material obturador, e o volume do material obturador em relação ao canal, foram, respectivamente, 61,28 ± 11,64% e 87,76 ± 9,98% para a TC, e 73,00 ± 20,41% e 89,96 ± 9,08% para TIT. Não foi encontrada diferença significativa entre a seleção do cone e depois o preenchimento do canal para ambas as técnicas, TC (p =0,593) ou TIT (p=0,4975). As técnicas não diferiram significativamente com respeito ao volume de guta-percha no material obturador (p=0,132), e volume de preenchimento de material em relação ao canal (p=0,612). Um ajuste ideal do cone principal de guta-percha cone no seu comprimento de trabalho não foi alcançado, independentemente da técnica de seleção empregada, e a area preenchida pelo material obturador foi semelhante para ambas as técnicas.

This study used micro-computed tomography (micro-CT) to evaluate the fit of the master gutta-percha cone at time of cone fit, gutta-percha volume in the filling material, and the filling material volume in relation to the canal at the apical limit of the working length. Root canals of 20 maxillary central incisors were prepared with rotary instruments and distributed into two groups (n=10). The gutta-percha cone tip was either plasticized (apical thermal impression technique - ATI) or not (conventional technique - CT), and its apical fit was checked. The apical 1 mm of working length was examined with a micro-CT, canals were filled with gutta-percha and sealer, and new micro-CT scans were obtained. In CT, gutta-percha filled 35.83 ± 15.05% of the canal at cone selection and 38.72 ± 11.64% after filling. In ATI, these values were 23.14 ± 7.74% and 26.98 ± 20.40%, respectively. Gutta-percha volume in the filling material, and filling material volume in relation to the canal were, respectively, 61.28 ± 11.64% and 87.76 ± 9.98% for CT, and 73.00 ± 20.41% and 89.96 ± 9.08% for ATI. No significant difference was found between cone selection and after canal filling, for either CT (p=0.593) or ATI (p=0.4975). The techniques did not differ significantly with respect to gutta-percha volume in the filling material (p=0.132) and filling material volume in relation to the canal (p=0.612). An ideal fit of the master gutta-percha cone at working length was not achieved regardless of the cone selection technique, and the material-filled area was similar for both techniques.

OBJECTIVE: This study assessed the muscular activity during root canal preparation through kinematics, kinetics, and electromyography (EMG). MATERIAL AND METHODS: The operators prepared one canal with RaCe rotary instruments and another with Flexo-files. The kinematics of the major joints was reconstructed using an optoelectronic system and electromyographic responses of the flexor carpi radialis, extensor carpi radialis, brachioradialis, biceps brachii, triceps brachii, middle deltoid, and upper trapezius were recorded. The joint torques of the shoulder, elbow and wrist were calculated using inverse dynamics. In the kinematic analysis, angular movements of the wrist and elbow were classified as low risk factors for work-related musculoskeletal disorders. With respect to the shoulder, the classification was medium-risk. RESULTS: There was no significant difference revealed by the kinetic reports. The EMG results showed that for the middle deltoid and upper trapezius the rotary instrumentation elicited higher values. The flexor carpi radialis and extensor carpi radialis, as well as the brachioradialis showed a higher value with the manual method. CONCLUSION: The muscular recruitment for accomplishment of articular movements for root canal preparation with either the rotary or manual techniques is distinct. Nevertheless, the rotary instrument presented less difficulty in the generation of the joint torque in each articulation, thus, presenting a greater uniformity of joint torques.

OBJETIVO: O objetivo deste estudo foi avaliar a influência do preparo cervical na determinação da lima anatômica inicial (LAI) em raízes palatinas de molares superiores e determinar a morfologia do canal 1 mm aquém do ápice. METODOLOGIA: Após a padronização da cavidade de acesso o grupo 1 recebeu a LAI sem preparo cervical (SPC). Do grupo 2 ao 5 o preparo cervical foi realizado com brocas Gates-Glidden (GG), Anatomic Endodontics Technology (AET), GT Rotary Files (GT) e brocas LA Axxes (LA), respectivamente. Os canais foram explorados com lima tipo K inserindo-se passivamente a lima 08 no comprimento de trabalho (CT), e limas de diâmetros sucessivamente maiores até obter a sensação de travamento CT. A área da LAI e a área do canal radicular foram medidas para verificar a porcentagem que o IAI ocupou no interior do canal em cada amostra por meio de MEV. A forma do canal radicular foi classificada em circular, oval e achatada. A análise estatística foi realizada pelo teste ANOVA/Tukey (P<0,05). RESULTADOS: Diminuição na porcentagen ocupada pela LAI dentro do canal foi: LA>GT=AET>GG>SPC. A morfologia foi predominantemente oval. CONCLUSÃO: O tipo de preparo cervical interfere na determinação da LAI.

PURPOSE: The aim of this study was to investigate the influence of cervical preflaring in determining the initial apical file (IAF) in the palatal roots of maxillary molars, and to determine the morphologic shape of the canal 1 mm short of the apex. METHODS: After preparing standard access cavities the group 1 received the IAF without cervical preflaring (WCP). In groups 2 to 5, preflaring was performed with Gates-Glidden (GG), Anatomic Endodontics Technology (AET), GT Rotary Files (GT) and LA Axxes (LA), respectively. Each canal was sized using manual K-files, starting with size 08 files, and making passive movements until the WL was reached. File sizes were increased until a binding sensation was felt at the WL. The IAF area and the area of the root canal were measured to verify the percentage occupied by the IAF inside the canal in each sample by SEM. The morphologic shape of the root canal was classified as circular, oval or flattened. Statistical analysis was performed by ANOVA/Tukey test (P < 0.05). RESULTS: The decreasing percentages occupied by the IAF inside the canal were: LA>GT=AET>GG>WCP. The morphologic shape was predominantly oval. CONCLUSION: The type of cervical preflaring used interferes in the determination of IAF.

O objetivo deste estudo foi avaliar a resistência de união do cimento resinoso à dentina intrarradicular em função da fonte fotoativadora e do momento de aplicação da luz. Os espaços para cimentação dos pinos foram preparados em caninos tratados endodonticamente. As raízes foram distribuídas em seis grupos (n = 10) de acordo com a fonte fotoativadora e momento de exposição à luz: I) Luz halógena (LH) com densidade de potência 600 mW/cm² + fotoativação imediata (t0); II) LH + fotoativação após 10 min (t10); III) LED com densidade de potência 800 mW/cm² (LED-800)+ t0; IV) LED-800 + t10; V) LED com densidade de potência 1.500 mW/cm² (LED-1500)+ t0; VI) LED-1500 + t10. Após a cimentação dos pinos, slicesdas regiões cervical, média e apical foram submetidos ao teste de push-out e avaliação das falhas. Verificou-se que LED-800 (4,40 ± 3,00 MPa) e LED-1500 (4,67 ± 3,04 MPa) proporcionaram resistência de união estatisticamente superior à LH (3,13 ± 1,76 MPa) (p<0,05), e não diferiram entre si (p>0,05).Não houve diferença estatisticamente significante da resistência de união entre t0 e t10 (p>0,05). A região cervical (4,75 ± 3,10 MPa) apresentou maiores valores de resistência de união que a apical (3,32 ± 2,30 MPa) (p<0,05) e a região média (4,14 ± 2,60 MPa) mostrou valores intermediários. Falhas adesivas foram predominantes no grupo LH, independentemente da região pino/canal. A parte apical apresentou predomínio de falhas adesivas e mistas. Concluiu-se que a resistência de união do cimento resinoso à dentina intrarradicular foi maior no terço cervical,com fotoativação com LED, independente do momentode exposição à luz

The aim of this study was to assess the bond strength of a resin cement to intraradicular dentin varying the light-curing unit and the moment at which the light was applied. Post spaces of endodontically treated canines were prepared. The roots were distributed into 6 groups (n=10) according to the light-curing unit and the moment of light exposure: I) Quartz tungsten halogen-600 mW/cm² (QTH) + immediate light activation (t0); II) QTH + light activation after 10 min (t10); III) Light-emitting diodes (LED)-800 mW/cm² (LED-800)+ t0; IV) LED-800 + t10; V) LED-1,500 mW/cm² (LED-1500)+ t0; VI) LED-1500 + t10. After post cementation, slices from coronal, middle and apical post/root regions were submitted to the push-out test and failure evaluation. It was verified that LED-800 (4.40 ± 3.00 MPa) and LED-1500 (4.67 ± 3.04 MPa) provided bond strength statistically superior to QTH (3.13 ± 1.76 MPa) (p<0.05), and did not differ from each other (p>0.05). There was no significant difference between t0 and t10 (p>0.05). Coronal post/root region (4.75 ± 3.10 MPa) presented significantly higher bond strength than the apical (3.32 ± 2.30 MPa) (p<0.05) and middle regions (4.14 ± 2.99 MPa) showed intermediate values. Adhesive failures were predominant when using QTH. Adhesive and mixed failures occurred more frequently in the apical region. Higher adhesion of the resin cement to intraradicular dentin was observed in the coronal region with LED light-activation, regardless of the moment of light exposure.

O objetivo deste estudo foi avaliar a influência do pré-tratamento de superfície dos pinos de fibra de vidro na resistência à flexão (RF), módulo de elasticidade (ME) e morfologia, bem como a resistência de união (RU) entre os pinos e o núcleo de preenchimento. Cinqüenta e dois pinos de fibra de vidro (lisos e serrilhados) foram divididos em 4 grupos (n=13): sem tratamento (controle), peróxido de hidrogênio a 10% por 10 min (HP-10), peróxido de hidrogênio 24% por 1 min (HP-24) e jato de óxido de alumínio (Al2O3). Para avaliar a RF e ME, o ensaio de flexão de 3 pontos foi realizado. Três pinos de cada grupo foram examinados em MEV. Resina composta foi utilizada como núcleo de preenchimento e as amostras foram seccionadas para obter palitos de microtração. Os dados foram analisados por ANOVA e teste de Tukey (α=0,05). Na RF, observou-se diferença estatisticamente significante entre os pinos e tipo de pré-tratamento de superfície (p<0,05), com as maiores médias para os pinos lisos. Al2O3 proporcionou maior RF que HP-24. Al2O3 promoveu maior ME que HP-24 e grupo controle. MEV revelou dissolução parcial da matriz de resina em todos os grupos tratados. Os pinos lisos tiveram a maior RU (p<0,05). Os pinos lisos apresentaram RF e RU superior aos pinos serrilhados (p<0,05). As propriedades mecânicas dos pinos de fibra de vidro e a resistência de união entre os pinos e o material resinoso não foram alterados pelos tratamentos de superfície, com exceção do jato de óxido de alumínio que aumentou o módulo de elasticidade dos pinos.

The aim of this study was to assess the influence of surface pretreatments of fiber-reinforced posts on flexural strength (FS), modulus of elasticity (ME) and morphology of these posts, as well as the bond strength (BS) between posts and core material. Fifty-two fiber posts (smooth and serrated) were assigned to 4 groups (n=13): no treatment (control), 10% hydrogen peroxide (HP) for 10 min (HP-10), 24% HP for 1 min (HP-24) and airborne-particle abrasion (Al2O3). To evaluate FS and ME, a 3-point bending test was performed. Three posts of each group were examined by scanning electron microscopy. Composite resin was used as the core build-up and samples were sectioned to obtain microtensile sticks. Data were analyzed by ANOVA and Tukey's test (α=0.05). For FS, significant differences were observed between posts type and surface pretreatment (p<0.05), with the highest means for the smooth posts. Al2O3 provided higher FS than HP-24. Al2O3 promoted higher ME than HP-24 and control. SEM images revealed partial dissolution of the resin matrix in all treated groups. The smooth posts had higher BS and FS than serrated posts (p<0.05). Mechanical properties of the glass fiber posts and the bond strength between posts and composite material were not altered by the surface treatments, except for airborne-particle abrasion that increased the post elastic modulus.

Este estudo avaliou a influência de protocolos de clareamento na temperatura intrapulpar e resistência à fratura de dentes clareados. Noventa incisivos superiores foram divididos em 9 grupos (n=10): G1: peróxido de carbamida a 35% (PC 35%), G2: peróxido de hidrogênio a 38% (PH 38%), G3: luz halógena, G4: LED-laser, G5: PC 35% + luz halógena, G6: PH 38% + luz halógena, G7: PC 35% + LED-laser, G8: PH 38% + LED-laser e G9: sem tratamento (controle). O canal radicular foi alargado, um termopar foi introduzido no ápice até a câmara pulpar e a temperatura foi calculada (°C). A resistência à fratura (kN) foi determinada em máquina Instron. Os dados foram analisados por análise de variância e teste de Tukey (p>0,05). A luz halógena utilizada isoladamente (1,10 ± 0,24) (G3) e associada ao PH 38% (1,15 ± 0,30) (G6) proporcionaram os maiores valores de temperatura, sendo estatisticamente diferentes dos demais grupos (p<0,05). O G1 (0,15 ± 0,06) e o G6 (0,19 ± 0,07) produziram os menores valores de resistência à fratura, sendo estatisticamente diferentes (p<0,05) do G5 (0,65 ± 0,49). Os protocolos de clareamento aumentaram a temperatura, mas nenhum incremento excedeu o valor crítico de 5,6oC. O PC 35%, PH 38% e as fontes de luz utilizadas isoladamente não alteraram a resistência à fratura dos dentes.

This study evaluated the influence of bleaching protocols on intrapulpal temperature and fracture strength of the bleached teeth. Ninety maxillary incisors were assigned to 9 groups (n=10): G1: 35% carbamide peroxide (35% CP), G2: 38% hydrogen peroxide (38% HP), G3: halogen light, G4: LED-laser, G5: 35% CP + halogen light, G6: 38% HP + halogen light, G7: 35% CP + LED-laser, G8: 38% HP + LED-laser, and G9: no treatment (control). Pulp space was widened, a thermocouple was introduced through the apex up to the pulp chamber and the temperature was recorded (°C). The fracture strength (kN) was determined using an Instron machine. Data were analyzed by ANOVA and Tukey's test (p<0.05). The halogen light alone (1.10 ± 0.24) (G3) and associated with 38% HP (1.15 ± 0.30) (G6) produced the highest temperature increase, statistically different (p<0.05) from the other groups. G1 (0.15 ± 0.06) and G6 (0.19 ± 0.07) produced the lowest values, statistically different (p<0.05) from G5 (0.65 ± 0.49). The bleaching protocols increased the temperature, but no increment exceeded the critical value of 5.6°C. Neither 35% CP nor 38% HP or the light sources alone altered the fracture strength of the teeth.

Este estudo avaliou a resistência à fratura de dentes submetidos ao clareamento interno restaurados com diferentes procedimentos. Quarenta incisivos superiores foram tratados endodonticamente e divididos em 4 grupos (n = 10): G1- restaurados com resina composta (RC), G2- clareados com peróxido de hidrogênio (PH) e restaurados com o RC, G3- restaurado com RC e pinos de fibra de vidro (RC + pinos) e G4- clareados e restaurados com RC + pinos. O PH foi aplicado na superfície vestibular e câmara pulpar 3 vezes por sessão, por 2 sessões com intervalo de 7 dias entre elas. Dez dentes hígidos adicionais foram submetidos a teste fratura (padrão ouro). A resistência à fratura (kN) foi determinada em máquina Instron. Os dados foram analisados por Análise de Variânica e teste de Tukey-Krammer (α= 0,05). Os dentes não tratados (padrão ouro) apresentaram a maior resistência à fratura (0,43 ± 0,16) (p <0,05). Os dentes restaurados com RC (G1) apresentaram a menor resistência à fratura (0,23 ± 0,11) (p <0,05). Os dentes clareados e restaurados com RC (G2) (0,26 ± 0,10), restaurado com RC + pinos (G3) (0,31 ± 0,17) e os clareados e restaurados com RC + pinos (G4) (0,33 ± 0,12) apresentaram valores intermediários, ora semelhantes ao do grupo com o maior valor, ora similares ao grupo de valores mais baixos. Pode-se concluir que os dentes submetidos ao clareamento interno podem ser restaurados com apenas resina composta.

This study evaluated the fracture resistance of teeth submitted to internal bleaching and restored with different procedures. Forty maxillary incisors were endodontically treated and assigned to 4 groups (n=10): G1- restored with composite resin (CR), G2- bleached with hydrogen peroxide (HP) and restored with CR, G3- restored with CR and fiberglass posts (CR + posts) and G4- bleached and restored with CR + posts. HP was applied in the buccal surface and pulp chamber 3 times at each one of 2 sessions with an interval of 7 days between them. Additional 10 sound incisors were subjected to fracture strength test (gold standard). The fracture strength (kN) was determined in an Instron machine. Data were analyzed by ANOVA and Tukey-Kramer test (α=0.05). The untreated teeth (gold standard) showed the highest (p<0.05) fracture strength (0.43 ± 0.16). Teeth restored with CR (G1) without internal bleaching had the lowest (p<0.05) fracture strength (0.23 ± 0.11). Teeth bleached and restored with CR (G2) (0.26 ± 0.10), restored with CR + posts ithout internal bleaching (G3) (0.31 ± 0.17) and, bleached and restored with CR + posts (G4) (0.33 ± 0.12) had intermediate values, sometimes similar to the group with the highest value, sometimes similar to the group with the lowest value. In conclusion, as far as the fracture strength is concerned, teeth subjected to internal bleaching can be restored with composite resin alone, as the use of posts in these teeth did not increase their resistance.