Abstract This study evaluated a new method of adhesive system application on the bond strength between fiber post and root dentin using two adhesive systems. The canals of sixty bovine incisors were prepared and obturated. The roots were divided into six groups (n=10) according to the adhesive system (Clearfil SE - CSE and Single Bond Universal - SBU) and the application strategy (microbrush - MB; rotary brush - RB; and ultrasonic tip - US). The glass fiber posts were cemented with resin cement (RelyX ARC). The roots were sectioned perpendicularly to their long axis, and three slices per root were obtained. Previously to the push-out test, confocal laser scanning microscopy (CLSM) was performed to illustrate the interfacial adaptation of the cement to the root canal walls. Failure patterns were analyzed with 40x magnification. Shapiro-Wilk indicated a normal distribution of the data. The bond strength values were compared using one-way ANOVA and Tukey's tests. Student's T test analyzed the differences between the adhesive systems within each third and protocol. A significance level of 5% was used. CSE with RB showed higher mean bond strength values compared to MB (conventional technique) (P < 0.05). US application resulted in intermediate bond strength values for CSE (P > 0.05). The application of SBU using RB generated higher mean bond strength values compared to MB and US (P < 0.05). Adhesive failures were predominant (65.5%). CSE and SBU application with the new rotary brush improved the bond strength of fiber posts to root dentin compared to the conventional strategy. obturated n=10 n10 n 10 (n=10 Clearfil microbrush US. . US) RelyX ARC. ARC ARC) axis obtained pushout push out CLSM (CLSM walls x magnification ShapiroWilk Shapiro Wilk data oneway one way Tukeys Tukey s tests Students Student protocol 5 used technique P 0.05. 005 0.05 0 05 0.05) 65.5%. 655 65.5% 65 (65.5%) n=1 n1 1 (n=1 00 0.0 65.5 6 (65.5% n= (n= 0. 65. (65.5 (n (65. (65 (6 (

Resumo Este estudo avaliou o efeito de um novo método para aplicação do sistema adesivo na resistência de união entre pino de fibra e dentina radicular usando dois sistemas adesivos. Os canais de sessenta incisivos bovinos foram preparados e obturados. As raízes foram divididas em seis grupos (n=10) de acordo com o sistema adesivo (Clearfil SE - CSE e Single Bond Universal - SBU) e com a estratégia de aplicação (microbrush - MB, escova rotatória - RB e inserto ultrassônico - US). Os pinos de fibra foram cimentados utilizando cimento resinoso (RelyX ARC). As raízes foram seccionadas perpendicularmente ao seu longo eixo e três fatias foram obtidas. Previamente ao teste de push-out, foi realizada microscopia de varredura confocal a laser para ilustrar a adaptação interfacial do cimento às paredes do canal radicular. Os padrões de falha foram analisados com magnificação de 40x. O teste de Shapiro-Wilk indicou distribuição normal dos dados. Os valores de resistência de união foram comparados usando o teste ANOVA de uma via e post hoc de Tukey. As diferenças entre os sistemas adesivos em cada terço e de acordo com cada protocolo foram analisadas pelo teste T de Student. O nível de significância foi de 5%. CSE aplicado com RB apresentou maiores valores médios de resistência de união do que quando aplicado com MB (técnica convencional) (P<0,05). Aplicação com US apresentou valores intermediários de resistência de união para o CSE (P>0,05). A aplicação do SBU utilizando RB gerou maiores valores médios de resistência de união comparados com MB e US (P<0,05). Falhas adesivas foram predominantes (65,5%). A aplicação do CSE e SBU com a nova escova rotatória melhorou a resistência de união dos pinos de fibra à dentina radicular comparados com a estratégia convencional. obturados n=10 n10 n 10 (n=10 Clearfil microbrush US. . US) RelyX ARC. ARC ARC) obtidas pushout, pushout push out, out push-out 40x x ShapiroWilk Shapiro Wilk dados Tukey Student 5 5% técnica convencional P<0,05. P005 P P<0,05 0 05 (P<0,05) P>0,05. P>0,05 (P>0,05) 65,5%. 655 65,5% 65 (65,5%) n=1 n1 1 (n=1 P00 P<0,0 (P<0,05 P>0,0 (P>0,05 65,5 6 (65,5% n= (n= P0 P<0, (P<0,0 P>0, (P>0,0 65, (65,5 (n P<0 (P<0, P>0 (P>0, (65, P< (P<0 P> (P>0 (65 (P< (P> (6 (P (

Abstract This study evaluated the setting time, pH, calcium ion release, solubility, and chemical structure of four calcium silicate sealers after ultrasonic activation (UA). Five sealers were evaluated: Sealer Plus (SP - control); Sealer Plus BC (SPBC), Bio C Sealers (BCS), Endosequence BC Sealer (EBC), and BioRoot RCS (BR). Ten groups were created based on the use or not of ultrasonic activation: SP; SP/UA; SPBC; SPBC/UA; BCS; BCS/UA; EBC; EBC/UA; BR; and BR/UA. Setting time was performed based on ISO 6876:2012 and ASTM C266-07 specifications. Solubility at 24hs, based on ISO 6876:2012. pH and calcium release were evaluated at 1, 24, 72, and 168hs. Raman spectroscopy was used to evaluate structural changes. Quantitative data were analyzed using One-Way ANOVA and Tukey post-hoc test (α=5%). Raman spectroscopy results were qualitatively analyzed. Setting times and solubility of all sealers were not affected by UA (p>0.05). The highest solubility was found for BCS, BCS/UA; and BR, BR/UA (p<0.05). After 24hs, calcium silicate sealers had higher pH than SP and SP/UA (p<0.05). BR and BR/UA had the highest pH at all time points. SP and SP/UA had stable pH at all time points. SP and SP/UA had the lowest calcium release values at all time points (p<0.05). EBC and EBC/UA calcium release significantly differ at 24,72 and 168hs (p<0.05). No chemical changes were observed during Raman spectroscopy. In conclusion, ultrasonic activation affected calcium ion release only for EndoSequence BC Sealer. Ultrasonic activation did not influence the initial and final setting time, solubility, pH, and chemical structure of any investigated sealers. UA. . (UA) control control) SPBC, SPBC , (SPBC) BCS (BCS) EBC, (EBC) BR. (BR) SPUA SPBC/UA SPBCUA BCS/UA BCSUA EBCUA BRUA 68762012 6876 2012 6876:201 C26607 C266 07 C266-0 specifications 24hs hs 68762012. 2012. 1 24 72 OneWay One Way posthoc post hoc α=5%. α5 α α=5% 5 (α=5%) p>0.05. p005 p p>0.05 0 05 (p>0.05) p<0.05. p<0.05 (p<0.05) 2472 24,7 conclusion (UA (SPBC (BCS (EBC (BR 6876201 687 201 6876:20 C2660 C26 C266- 2 7 α=5 (α=5% p00 p>0.0 (p>0.05 p<0.0 (p<0.05 247 687620 68 20 6876:2 C2 α= (α=5 p0 p>0. (p>0.0 p<0. (p<0.0 68762 6 6876: (α= p>0 (p>0. p<0 (p<0. (α p> (p>0 p< (p<0 (p> (p< (p

Resumo Esse estudo avaliou o tempo de presa, pH, liberação de íons cálcio, solubilidade e estrutura química de quatro cimentos à base de silicate de cálcio após a ativação ultrassônica (AU). Cinco cimentos foram avaliados: Sealer Plus (SP - control); Sealer Plus BC (SPBC), Bio C Sealers (BCS), Endosequence BC Sealer (EBC) e BioRoot RCS (BR). Dez grupos foram criados com base no uso ou não de ativação ultrassônica: SP; SP/UA; SPBC; SPBC/UA; BCS; BCS/UA; EBC; EBC/UA; BR; e BR/UA. Tempo de presa foi realizado baseado nas especificações ISO 6876:2012 e ASTM C266-07. Solubilidade em 24hs, baseado na ISO 6876:2012. pH e liberação de cálcio foram avaliados em 1, 24, 72 e 168hs. Espectroscopia Raman foi usada para avaliar alterações estruturais. Os dados quantitativos foram analisados utilizando ANOVA de uma via e teste post-hoc de Tukey (α=5%). Os resultados da espectroscopia Raman foram analisados qualitativamente. Os tempos de presa e a solubilidade de todos os cimentos não foram afetados pelo AU (p>0.05). Maior solubilidade foi encontrada para BCS, BCS/AU; e BR, BR/AU (p<0.05). Após 24hs, os cimentos de silicato de cálcio apresentaram pH mais elevado que SP e SP/AU (p<0.05). BR e BR/AU tiveram o pH mais alto em todos os momentos. SP e SP/AU apresentaram pH estável em todos os momentos. SP e SP/AU tiveram os menores valores de liberação de cálcio em todos os momentos (p<0.05). A liberação de cálcio EBC e EBC/AU diferiram significativamente em 24,72 e 168hs (p<0.05). Nenhuma alteração química foi observada durante a espectroscopia Raman. Em conclusão, a ativação ultrassônica afetou a liberação de íons cálcio apenas para o EndoSequence BC Sealer. A ativação ultrassônica não influenciou o tempo de presa inicial e final, a solubilidade, o pH e a estrutura química de nenhum dos cimentos investigados. AU. . (AU) control control) SPBC, SPBC , (SPBC) BCS (BCS) (EBC BR. (BR) SP/UA SPUA UA SPBC/UA SPBCUA BCS/UA BCSUA EBC/UA EBCUA BRUA BR/UA 68762012 6876 2012 6876:201 C26607. C26607 C266 07. 07 C266-07 24hs hs 68762012. 2012. 1 24 7 estruturais posthoc post hoc α=5%. α5 α α=5% 5 (α=5%) qualitativamente p>0.05. p005 p p>0.05 0 05 (p>0.05) BCS/AU BCSAU BRAU p<0.05. p<0.05 (p<0.05) SPAU EBCAU 2472 24,7 conclusão final investigados (AU (SPBC (BCS (BR 6876201 687 201 6876:20 C2660 C26 C266-0 2 α=5 (α=5% p00 p>0.0 (p>0.05 p<0.0 (p<0.05 247 687620 68 20 6876:2 C2 C266- α= (α=5 p0 p>0. (p>0.0 p<0. (p<0.0 68762 6 6876: (α= p>0 (p>0. p<0 (p<0. (α p> (p>0 p< (p<0 (p> (p< (p

Abstract This study compared the pH and calcium ion release of calcium silicate- (Bio-C Temp) and calcium hydroxide-based (Ultracal XS) medications. Intracanal remnants of both medications were also evaluated using SEM-EDS after the removal protocol. Thirty-five bovine teeth were prepared. Fifteen were filled with Bio-C Temp and 15 with Ultracal XS. Five remained without intracanal medication (control group). Five samples from each experimental time (i.e.. 24, 72, and 168 hours) were used to measure pH and calcium ions release using a digital pH meter and microplate reader, respectively. Afterward, the peaks of the chemical elements composing both medications were analyzed in SEM-EDS. One-way ANOVA and Tukey's post hoc test analyzed the pH and calcium ion release data. Student's t-test compared the medications in each experimental time. SEM-EDS described the percentage of chemical elements in the samples. Bio-C Temp and Ultracal XS showed a significant pH increase from 24 to 168 hours (p<0.05). Ultracal XS showed a higher pH value at 24 hours than Bio-C Temp (p<0.05) but were similar at 72 and 168h (p > 0.05). Calcium ion release did not depend on the experimental period (p > 0.05). Bio-C Temp showed lower calcium ions release than Ultracal XS at 24 hours (p<0.05). SEM-EDS analyses showed the remains of both medications, but the concentration of Si, Al, and W ions was present only in the calcium silicate-based medication. Bio-C Temp presented alkaline pH and a satisfactory calcium ion release over the time. The remaining of both medications were present after the protocols for paste removal. silicate BioC Bio C hydroxidebased hydroxide based SEMEDS SEM EDS protocol Thirtyfive Thirty five prepared 1 control group. group . group) i.e.. ie i e (i.e. 16 reader respectively Afterward SEMEDS. EDS. Oneway One way Tukeys Tukey s data Students Student ttest t 2 p<0.05. p005 p p<0.05 0 05 (p<0.05 7 h 0.05. 005 0.05 0.05) Si Al silicatebased i.e. (i.e p00 p<0.0 (p<0.0 00 0.0 i.e p0 p<0. (p<0. 0. p<0 (p<0 p< (p<

Resumo Este estudo comparou o pH e a liberação de íons cálcio de medicações intracanais a à base de silicato de cálcio (Bio-C Temp) e à base de hidróxido de cálcio (Ultracal XS). Remanescentes de ambas as medicações também foram avaliados usando microscopia eletrônica de varredura e espectroscopia de dispersão de energia após o protocolo de remoção. Trinta e cinco dentes bovinos foram preparados. Quinze dentes foram preenchidos com Bio-C Temp e 15 com Ultracal XS. Cinco permaneceram sem medicação intracanal (grupo controle). Cinco amostras de cada tempo experimental (ou seja, 24, 72 e 168 horas) foram usadas para medir o pH e a liberação de íons de cálcio usando um medidor de pH digital e um leitor de microplacas, respectivamente. Em seguida, os picos dos elementos químicos que compõem os dois medicamentos foram analisados em microscopia eletrônica de varredura e por espectroscopia de dispersão de energia. Os testes One-way ANOVA e post hoc de Tukey analisaram os dados de pH e liberação de íons cálcio. O teste t de Student comparou as medicações em cada tempo experimental. A microscopia eletrônica de varredura e a espectroscopia de dispersão de energia descreveu a porcentagem de elementos químicos nas amostras. O Bio-C Temp e o Ultracal XS mostraram um aumento significativo de pH de 24 a 168 horas (p<0,05). O Ultracal XS apresentou um valor de pH mais alto em 24 horas do que o Bio-C Temp (p<0,05), mas foi semelhante em 72 e 168h (p > 0,05). A liberação de íons cálcio não dependeu do período experimental (p> 0,05). O Bio-C Temp apresentou menor liberação de íons de cálcio do que Ultracal XS em 24 horas (p<0,05). As análises de microscopia eletrônica de varredura e espectroscopia de dispersão de energia mostraram remanescentes de ambas as medicações, mas a concentração de íons Si, Al e W estavam presentes apenas na medicação à base de silicato de cálcio. O Bio-C Temp apresentou pH alcalino e maior liberação de íons cálcio. Remanescentes de ambas as medicações estiveram presentes após os protocolos de remoção da pasta. BioC Bio C . XS) preparados 1 grupo controle. controle controle) ou seja 7 16 microplacas respectivamente seguida Oneway One way 2 p<0,05. p005 p p<0,05 0 05 (p<0,05) p<0,05, , h 0,05. 005 0,05 0,05) p> Si pasta p00 p<0,0 (p<0,05 00 0,0 p0 p<0, (p<0,0 0, p<0 (p<0, p< (p<0 (p<

Resumo Este estudo teve como objetivo avaliar a influência da ativação ultrassônica (AU) nas propriedades físico-químicas de cimentos de silicato de cálcio. Nove condições experimentais foram criadas com base nos cimentos de silicato de cálcio (Bio-C Sealer, Sealer Plus BC e Bio Root RCS) e na ativação ultrassônica (sem ativação [SA], 10 segundos e 20 segundos). Os grupos experimentais foram BC-SA, BC-10, BC-20, SPBC-SA, SPBC-10, SPBC-20, BR-SA, BR-10 e BR-20. A ativação foi realizada com um inserto ultrassônico 20/.01. O molde para a análise físico-química foi preenchido e avaliado de acordo com a especificação ANSI/ADA nº. 57: tempo de presa inicial e final, escoamento, radiopacidade e solubilidade. Também foram realizados testes para avaliação de pH e liberação de íons cálcio com períodos experimentais de 1, 24, 72 e 168 horas com pHmetro e espectrofotômetro colorimétrico. Os dados foram analisados por análise de variância one-way e testes post-hoc de Tukey. O nível de significância foi estabelecido em 5%. O tempo de AU aumentou progressivamente o tempo de presa inicial para todos os cimentos de silicato de cálcio (p < 0,05). Vinte segundos de AU aumentaram os valores médios de escoamento de Sealer Plus BC e Bio-C Sealer em comparação com SA (P < 0,05). A AU não influenciou a radiopacidade e a solubilidade dos cimentos testados (P > 0,05). AU por 20 segundos aumentou os níveis de pH e a liberação de íons cálcio de Sealer Plus BC e Bio-C Sealer em 168h (P < 0,05). AU por vinte segundos interfere em algumas propriedades físico-químicas dos cimentos de silicato de cálcio.

Abstract This study aimed to evaluate the influence of ultrasonic activation (UA) on the physicochemical properties of hydraulic calcium silicate-based sealers. Nine experimental conditions were created based on the hydraulic calcium silicate-based sealers (Bio-C Sealer, Sealer Plus BC and Bio Root RCS) and the ultrasonic activation (no activation [NA], 10 seconds, and 20 seconds). Then the experimental groups were BC-NA, BC-10, BC-20, SPBC-NA, SPBC-10, SPBC-20, BR-NA, BR-10, and BR-20. Activation was performed with an ultrasonic insert 20/.01. The mold for the physicochemical analysis was filled and evaluated according to the ANSI/ADA specification nº. 57: initial and final setting time, flow, radiopacity and solubility. Tests were also performed to evaluate pH and calcium ion release with experimental periods of 1, 24, 72, and 168 hours with a pH meter and colorimetric spectrophotometer. Data were analyzed by one-way analysis of variance and post-hoc Tukey tests. The significance level was set at 5%. The time of UA progressively delayed the initial setting time for all hydraulic calcium silicate-based sealers (p < 0.05). Twenty seconds of UA increased the mean flow values of Sealer Plus BC and Bio-C Sealer compared to NA (p < 0.05). UA did not influence the radiopacity and solubility of the tested sealers (p > 0.05). UA for 20 seconds enhanced the pH levels and the calcium ion release of Sealer Plus BC and Bio-C Sealer at 168h (p < 0.05). UA for twenty seconds interferes with some physicochemical properties of hydraulic calcium silicate-based sealers.

Resumo Este estudo teve como objetivo avaliar a influência de cimentos à base de silicato de cálcio na resistência de união de pinos de fibra utilizando cimentos resinosos convencionais e autoadesivos. Sessenta dentes humanos monorradiculares foram selecionados. Os canais foram preparados um instrumento reciprocante 40.06. As raízes foram distribuídas aleatoriamente em seis grupos (n = 10) de acordo com as estratégias de obturação do canal e cimentação dos pinos de fibra: AH Plus/RelyX ARC; AH Plus/RelyX U200; Bio C Sealer/RelyX ARC; Bio C Sealer/RealyX U200; Sealer Plus BC/RelyX ARC; e Sealer Plus BC/RelyX U200. As raízes foram seccionadas transversalmente e foi obtido um espécime por terço. O teste de push-out foi realizado em uma velocidade de 1mm/min. Os padrões de falha foram descritos após avaliação em estereomicroscópio com aumento de 10×. A resistência de união foi calculada e analisada por ANOVA e teste de Tukey. AH Plus não influenciou na resistência de união dos pinos de fibra cimentados com cimento resinoso convencional (RelyX ARC) ou autoadesivo (RelyX U200) (p > 0,05). Os menores valores de resistência de união foram obtidos quando os cimentos à base de silicato de cálcio foram associados ao cimento resinoso convencional (Bio C Sealer/RelyX ARC e Sealer Plus BC/RelyX ARC) (p < 0,05). Com exceção do Sealer Plus BC/RelyX ARC, todos os grupos apresentaram menor resistência de união na porção apical em comparação com a porção cervical do pino (p < 0,05). Falhas adesivas entre cimento e pino e cimento e dentina foram predominantes (55,3%). Cimentos a base de silicato de cálcio diminuíram a resistência de união de pinos de fibra cimentados com cimento resinoso convencional.

Abstract This study aimed to evaluate the influence of calcium silicate-based sealers on the bond strength of fiber posts using conventional and self-adhesive resin cement. Sixty single-rooted teeth were selected. The canals were prepared with a reciprocating instrument 40.06. The roots were randomly distributed in six groups (n = 10) according to the strategies for root canal filling and fiber posts cementation: AH Plus/RelyX ARC; AH Plus/RelyX U200; Bio C Sealer/RelyX ARC; Bio C Sealer/RealyX U200; Sealer Plus BC/RelyX ARC; and Sealer Plus BC/RelyX U200. The roots were transversally sectioned, and one slice per post-third was obtained. The push-out test was performed at a crosshead speed of 1mm/min. The failure patterns were described after assessment with a stereomicroscope with a 10× magnification. Bond strength was calculated and analyzed using the ANOVA and Tukey test. AH Plus did not influence the bond strength of fiber posts cemented with conventional (RelyX ARC) or with self-adhesive resin cement (RelyX U200). The lowest bond strength values were obtained when calcium silicate-based sealers were associated with conventional resin cement (Bio C Sealer/RelyX ARC and Sealer Plus BC/RelyX ARC). Except for Sealer Plus BC/RelyX ARC, all groups presented lower bond strength at the apical portion compared to the cervical portion of the post. Adhesive failures between cement and post and cement and dentin were predominant (55.3%). Calcium silicate-based sealers decreased the bond strength of fiber posts cemented with conventional resin cement.

Abstract The aim of this study was to evaluate the quality of curved root canal preparation, torsional fatigue, and cyclic fatigue of rotary systems manufactured with different NiTi alloys. Ninety single-rooted canals with curvatures of 15° to 30o were scanned and divided into three groups according to the rotary system used: BT-Race (BTR) – 10.06, 35.00, 35.04; SequenceRotaryFile (SRF) – 15.04, 25.06, 35.04; and ProDesignLogic (PDL) – 25.01, 25.06, 35.05. Each system was used on three specimens. The teeth were prepared, scanned, and analyzed to assess increase in volume, transportation, and centering ability of the root canal. Torsional fatigue of glide path instruments (BTR 10.06, SRF 15.04 and PDL 25.01) and cyclic fatigue of the finishing instrument (BTR 35.04, SRF 35.04 and PDL 35.05) were obtained by analyzing completely new instruments (n = 10) and instruments after they had been used three times (n = 10). After the torsional and cyclic fatigue tests, the fractured surface of the new and used instruments were examined by scanning electron microscopy. Increase in volume, canal transportation, and centering ability showed no significant differences among the groups (p > 0.05). The torsional test showed that SRF 15.04 produced the highest torque values for both new and used instruments, followed by PDL 25.01 and BTR 10.06 (p < 0.05). PDL 25.01, both new and used, exhibited higher values of angular deflection followed by SRF 15.04 and BTR 10.06 (p < 0.05). As regards cyclic fatigue, use of PDL 35.05, both new and used, required a longer time and larger number of cycles than did SRF 35.04 and BTR 35.04 (p < 0.05). Clinical use affected the torsional fatigue of BTR; however, cyclic fatigue was not significantly affected (p < 0.05). All rotary systems were able to prepare the curved canals satisfactorily and were used safely on the three specimens. Relative to torsional fatigue, SRF 15.04 exhibited a higher torque, and PDL 25.01, higher angular deflection. BTR 10.06 was the most affected by clinical use. PDL 35.05 showed greater resistance to cyclic fatigue.

Abstract: Sixty moderately curved canals of mandibular molars classified as Vertucci’s type IV canal configuration were selected by micro-CT 1174. The teeth were divided into two groups according to the kinematics used, whether reciprocating or rotary motion (n=30, totaling 60 mesial root canals). The instruments used to perform the glide path procedures had identical features (0.15 mm of tip size, 0.04 mm/mm taper, thermal treatment, and square cross-section), but differed in the direction of the cutting blade. The duration of the procedure and the absolute and percentage frequency of the instruments to reach the full working length were recorded. The torsional test (3630-1; 1992) was performed on both used and unused instruments, to evaluate a possible reduction in the torsional resistance when using the glide path procedure. Statistical analysis was performed using the unpaired t-test and the chi-square test, and the level of significance was set at 5%. The type of kinematics used affected the duration of glide path procedures, and the reciprocating motion seemed to induce less torsional stress during glide path procedures.

Resumo Os objetivos deste estudo foram avaliar as propriedades físicas e químicas, citototoxidade e penetração tubular de uma nova medicação à base de silicato de cálcio. Para o teste de pH, e liberação de íons cálcio (1, 24, 72 e 168 h) foi usado medidor de pH e espectofotômetro colorimétrico, respectivamente. Avaliação da radiopacidade, seguiu a ISO 6876:2012). A citotoxicidade foi avaliada pela porcentagem de células viáveis usando o ensaio MTT. Imagens ilustrativas de penetração tubular foram obtidas usando microscopia confocal de varredura a laser (CLSM). Os dados de pH e liberação de cálcio foram analisados através do teste de Análise de Variância de duas vias e teste de Tukey. A radiopacidade foi avaliada usando o teste T de Student. Para a citotoxicidade foi empregada a Análise de Variância de uma via e teste de Tukey. Ambos os materiais apresentaram pH alcalino em todos os tempos experimentais. Os valores de pH da pasta de hidróxido de cálcio foram superiores à pasta biocerâmica em 1, 24 e 72 h (p<0,05). A liberação de cálcio da pasta biocerâmica foi inferior à pasta de hidróxido de cálcio apenas em 24 h (p<0,05). Bio-C Temp foi mais radiopaco que o Ultracal XS (p<0,05). A pasta biocerâmica apresentou efeito citotóxico dependente da dose e do tempo de exposição. Imagens de CLSM mostraram ausência de penetração intratubular para ambas as pastas. A nova medicação à base de silicato de cálcio apresentou pH alcalino, alta liberação de cálcio e boa radiopacidade. Bio C Temp apresentou um efeito citotóxico dependente da dose e do tempo de exposição e ausência de penetração tubular.

Abstract The aims of this study were to evaluate the physical and chemical properties, cytotoxicity and dentinal tubule penetration of a new calcium silicate-based root canal dressing. For pH and calcium ion release evaluation (1, 24, 72 and 168 h) were used a pH meter and colorimetric spectrophotometer, respectively. Radiopacity evaluation followed the ISO 6876:2012. Cytotoxicity was evaluated by the percentage of cell viability using MTT assay. Illustrative images of dentinal tubule penetration were obtained using confocal laser scanning microscopy (CLSM). Data from pH and calcium ion release were statistically analyzed by two-way analysis of variance and Tukey test. Radiopacity was analyzed using the Student t-test. The statistical tests for cytotoxicity results were the one-way analysis of variance and Tukey test. Both materials showed alkaline pH in all experimental times. The pH values for calcium hydroxide paste were higher than bioceramic paste at 1, 24, and 72 h (p<0.05). The calcium ion release of bioceramic was lower than the calcium hydroxide paste only at 24 h (p<0.05). The bioceramic was more radiopaque than the calcium hydroxide paste (p<0.05). Bioceramic paste presented a dose and time-dependent cytotoxic effect after MTT assay. CLSM images showed absence of tubule penetration for both pastes. The new calcium silicate-based canal dressing presented alkaline pH, high calcium release, and acceptable radiopacity. Bio C Temp showed a dose and time-dependent cytotoxic and absence of dentinal tubule penetration.

Resumo Este estudo objetivou avaliar a penetração nos túbulos dentinários de um novo cimento biocerâmico utilizando microscopia confocal de varredura a laser (MCVL). Um fluoróforo específico (Fluo-3) foi misturado com o cimento. Quarenta raízes distovestibulares de molares superiores foram selecionados e o preparo do canal radicular foi realizado com instrumentos Wave One Gold #35.06. As raízes foram divididas randomicamente em quatro grupos de acordo com os procedimentos obturadores: Bioceramic/Lentulo: cimento biocerâmico (Sealer Plus BC); Bioceramic/EasyClean: três ativações do cimento com instrumento Easy Clean (3 x 20 s); Bioceramic/Irrisonic: ativação ultrassônica do cimento por 30 s e AHplus/Lentulo: cimento à base de resina epóxica (AH Plus) foi utilizado com o mesmo protocolo que o grupo Bioceramic/Lentulo. Após 72h, os espécimes foram seccionados transversalmente em 2 e 7 mm do ápice radicular e analisados com MCVL. A área de penetração nos túbulos dentinários foi mensurada com Adobe Photoshop CC2018. O teste de Kruskal Wallis e T de Wilcoxon foram realizados. Os resultados de penetração foram similares para ambos os cimentos independentemente de qual técnica foi utilizada para ativá-los no interior do canal radicular (p>0,05). É razoável concluir que a penetração de cimentos biocerâmicos e à base de resina epóxica ocorreram de forma pouco expressiva. O tipo de ativação do cimento biocerâmcio não afeta sua penetrabilidade nos túbulos dentinários. Fluo 3 deve ser recomendado como o fluoróforo para avaliar a penetração intratubular de cimentos biocerâmicos.

Abstract This study aimed to evaluate penetrability on dentinal tubule of a new bioceramic sealer through confocal laser scanning microscopy (CLSM). A specific fluorophore (Fluo-3) was mixed with the sealer. Forty distobuccal roots from maxillary molars were selected, and root canal preparation was carried out with Wave One Gold # 35.06 instruments. Roots were randomly assigned to 4 groups according to the filling procedures: Bioceramic/Lentulo (Sealer Plus BC); Bioceramic/EasyClean group, three activation of the sealer (3x20 s) with Easy Clean instrument; Bioceramic/Irrisonic: ultrasonic activation for 30 s; and AHplus/Lentulo: epoxy resin based sealer (AH Plus) was utilized with the same protocol as the BC/LE group. After 72 h, specimens were transversally sectioned at 2 and 7 mm from root apex and then analyzed through CLSM. Sealer penetration area on dentinal tubule was measured by Adobe Photoshop CC2018. Kruskal Wallis and Wilcoxon T tests were carried out. Penetrability results were similar for both sealers regardless of which technique was performed to activate them inside the root canal (p>0.05). It is reasonable to conclude that penetration of bioceramic and epoxy resin based sealers occurred unimpressively. The type of instrument used to activate bioceramic sealer did not affect penetrability. Fluo 3 should be recommended as the fluorophore to evaluate dentinal tubule penetration of bioceramic sealers.

Abstract To evaluate the influence of novel ultrasonic tips as an auxiliary method for the rotary preparation of flattened/oval-shaped canals. Forty-five mandibular incisors were selected and divided into one of three experimental groups (n = 15): Group PFCP – ProDesign Logic 25/.05 + Flatsonic + Clearsonic + Prodesign Logic 40/.01; Group FCP – Flatsonic + Clearsonic + ProDesign Logic 40/.01; and Group PP – Prodesign Logic 25/.05 + Prodesign Logic 40/.05. The teeth were scanned preoperatively and postoperatively using microcomputed tomography. The percentage values for increase in volume, non-instrumented surface area, dentin removal, degree of canal transportation, and centering ratio between the experimental groups were examined. Data were analyzed using the non-parametric Kruskal-Wallis and Dunn’s tests (p < 0.05). Group PFCP showed the greatest volume increase in the total portion of the root canal and the lowest percentage of non-instrumented surface area. Regarding the degree of transportation in the buccolingual direction, statistically significant differences between groups PFCP and PP were observed at the coronal third of the canal. In the mesiodistal direction, no statistically significant differences were observed at the coronal, middle, and apical thirds. As for the centering ratio, statistically significant differences were found in the buccolingual direction. In the mesiodistal direction, no statistically significant differences were observed at the coronal, middle, and apical thirds. The use of novel ultrasonic tips combined with rotary instruments in group PFCP provided a significant increase in volume and reduced the percentage of non-instrumented areas during the preparation of flattened/oval-shaped canals.

Resumo Este estudo teve por objetivo avaliar as propriedades físico-químicas de um cimento à base de silicato de cálcio (Sealer Plus BC MK Life, Porto Alegre, Brasil) e compará-las a um cimento à base de resina epóxica (AH Plus, Dentsply DeTrey GmbH, Konstanz, Alemanha). Tempo de presa inicial e final foram avaliados com base na ISO 6876:2012 e ASTM C266:03. Liberação de íons cálcio e pH foram avaliados após o preenchimento de tubos de polietileno com os cimentos e imersão em 10 mL de água deionizada. Após os tempos experimentais de 1,24,72 e 168 horas, os valores de pH e liberação de íons cálcio foram mensurados utilizando um medidor de pH e um espectofotômetro colorimétrico, respectivamente. Escoamento foi avaliado com base na ISO 6876:2012. Moldes de 10 mm de diâmetro e 1 mm de espessura foram preparados para análise de radiopacidade (ISO 6876:2012 e ADA n.57), solubilidade (ISO 6876:2012). Os dados foram analisados por análise de variância, teste T de Student e teste de Tukey (p<0,05). A liberação de íons cálcio e os valores de pH foram significativamente maiores para o Sealer Plus BC em comparação com o AH Plus (p<0,05). Menores valores de tempo de presa, escoamento e radiopacidade foram observados para o cimento biocerâmico quando comparados com o AH Plus (p<0,05). Sealer Plus BC apresentou propriedades físico-químicas de tempo de presa, pH, liberação de íons cálcio, escoamento, radiopacidade de acordo com as normas exigidas, porém maior solubilidade que aquelas previstas pela ISO 6876:2012.

Abstract This study aimed to evaluate the physicochemical properties of a calcium silicate-based sealer (Sealer Plus BC; MK Life, Porto Alegre, Brazil) compared with an epoxy-resin sealer (AH Plus; Dentsply DeTrey GmbH, Konstanz, Germany). Initial and final setting time was assessed based on ISO 6876:2012 and ASTM C266:03. Calcium ion release and pH were evaluated by filling polyethylene tubes with sealers and then immersing them in 10 mL of deionized water. Following experimental periods of 1, 24, 72 and 168 hours, the samples were measured regarding pH and calcium ion release with a pH meter and a colorimetric spectrophotometer, respectively. The flow was examined based on ISO 6876:2012. Rings of 10 mm in diameter with 1 mm thickness were prepared to analyze the radiopacity (ISO 6876:2012 and ADA n.57) and solubility (ISO 6876:2012). The data were analyzed by variance analysis, Student-T and Tukey tests (p<0.05). The calcium ion release and pH values were significantly higher for the Sealer Plus BC compared with the AH Plus (p<0.05). Lower setting time, flow and radiopacity were observed for the bioceramic sealer than for AH Plus (p<0.05). Sealer Plus BC exhibited higher solubility compared with AH Plus (p<0.05). Sealer Plus BC showed physicochemical properties as setting time, pH, calcium release, flow, and radiopacity following the required standards, but higher solubility than the minimum values required by ISO 6876:2012.

Resumo Este estudo verificou o grau de saturação de oxigênio (SaO2) pulpar antes, durante e após o clareamento dental caseiro em incisivos centrais superiores hígidos. O nível de SaO2 foi verificado em 136 incisivos centrais superiores hígidos usando oxímetro de pulso. A técnica de clareamento empregou peróxido de carbamida 10% em moldeira individual por quatro horas diárias durante 14 dias. Os níveis de SaO2 foram analisados antes do clareamento (T0), imediatamente após a primeira sessão (T1), no sétimo dia de tratamento (T2), no décimo quinto dia (um dia após a última sessão) (T3) e 30 dias após o término do clareamento dental (T4). A análise estatística utilizou o modelo de equações de estimações generalizadas (GEE), teste t de Student (p<0,05) e correlação de Pearson. Os níveis médios de SaO2 pulpar foram 85,1% em T0, 84,9% em T1, 84,7% em T2, 84,3% em T3 e 85,0% em T4. Foi observada uma redução gradual dos níveis de SaO2, com diferenças significantes (p<0,001) durante o clareamento dental caseiro. No entanto, 30 dias após o término do clareamento dental, houve retorno aos valores iniciais. O clareamento dental caseiro provocou uma diminuição transitória reversível no grau de SaO2 pulpar.

Abstract The present study assessed oxygen saturation (SaO2) levels before, during, and after at-home bleaching treatment in the pulps of healthy maxillary central incisors. SaO2 levels were measured in 136 healthy maxillary central incisors using a pulse oximeter. The bleaching protocol consisted of 10% carbamide peroxide gel placed in individual trays and used for four hours daily for 14 days. SaO2 levels were assessed before bleaching (T0), immediately after the first session (T1), on the 7th day of treatment (T2), on the 15th day (the day following the last session) (T3), and 30 days after completion of the bleaching protocol (T4). Data were statistically analyzed using generalized estimating equations (GEE), Student’s t test (p<0.05) and Pearson’s correlation. Mean pulp SaO2 levels were 85.1% at T0, 84.9% at T1, 84.7% at T2, 84.3% at T3, and 85.0% at T4. Gradual reductions in SaO2 levels were observed, with significant differences (p<0.001) during the course of home bleaching treatment. However, 30 days after the end of the bleaching protocol, SaO2 levels returned to baseline levels. Home bleaching caused a reversible transient decrease in SaO2 levels in the pulps.

Abstract Acute periradicular abscess is a condition characterized by the formation and propagation of pus in the periapical tissues and generally associated with debilitating pain. Objective: The aim of this study was to compare the overall analgesic effectiveness of two combinations of opioid and non-opioid analgesics for acute periradicular abscess. Material and Methods: This study included 26 patients who sought emergency care in a Brazilian dental school. The patients were randomly divided into two groups: Co/Ac - oral prescription of codeine (30 mg) plus acetaminophen (500 mg), every 4 h, for 3 days or Tr/Ac - oral prescription of tramadol hydrochloride (37.5 mg) plus acetaminophen (500 mg) on the same schedule. Two factors were evaluated: (1) pain scores recorded by the patients in a pain diary 6, 12, 24, 48, and 72 h after treatment, using the Visual Analogue Scale; and (2) the occurrence of adverse effects. Results: In both groups, there was a reduction in pain scores over time. For the Co/Ac group, there was a significant reduction in the scores 12, 24, 48, and 72 hours after treatment (P<0.05). In the Tr/Ac group, the scores significantly decreased over time from time point 6 h (P<0.05). Comparing the pain at each time point, the groups were not significantly different (P>0.05), i.e., both treatments were effective in controlling pain caused by APA; however, the combination of Tr/Ac caused more adverse reactions as two patients had to stop using the medication. Conclusion: This study suggests that, considering both analgesic efficacy and safety, the combination of codeine and acetaminophen is more effective to control moderate to severe pain from acute periradicular abscesses.

Resumo O objetivo deste estudo foi avaliar a influência de diferentes protocolos de irrigação ultrassônica passiva na remoção de detritos em sulcos artificialmente criados nos terços radiculares cervical, médio e apical. Quarenta raízes de incisivos bovinos extraídos foram instrumentadas a 1 mm do ápice radicular com um instrumento R50 Reciproc e irrigadas com hipoclorito de sódio a 2,5%. As raízes foram então inseridas numa mufla e clivadas em duas hemisecções. Sulcos (3 mm de comprimento) foram feitos a 2, 7 e 12 mm do ápice radicular em uma hemisecção e preenchidos com detritos dentinários. As hemisecções foram reagrupadas na mufla e divididas em 4 grupos (n = 10) de acordo com o protocolo de irrigação final: Grupo controle: 3x20 s usando agulha de calibre #30 sem agitação da solução irrigadora; Grupo PUI-s (static passive ultrasonic irrigation): 3x20 s de irrigação ultra-sônica passiva com a ponta do inserto mantida estática no terço apical; Grupo PUI-t (Irrigação ultrassônica passiva por terço): 20 s de PUI em cada terço; Grupo PUI-d (Irrigação ultrassônica dinâmica): 3x20 s de PUI movendo dinamicamente o inserto em toda extensão do canal radicular. Em todos os grupos, foi utilizado um total de 6 mL de hipoclorito de sódio a 2,5% como irrigante. Após estes procedimentos, os sulcos foram analisadas com um estereomicroscópio e pontuações foram atribuídas quanto à remoção dos detritos. Os dados foram analisados estatisticamente (a=0.05). Os resultados mostraram uma melhor limpeza em todos os grupos onde a solução de irrigação foi agitada com dispositivo ultrassônico do que no grupo controle (p<0,05). No terço apical, o PUI-d e o PUI-s apresentaram performance semelhantes (p>0,05) e melhor limpeza do que o PUI-t (p<0,05). Os métodos dinâmico e estático de agitação da solução de irrigação proporcionaram uma limpeza mais eficaz. O PUID promoveu os sulcos mais completamente limpos sugerindo que seu uso é o mais adequado em casos de dentes com anatomia de canal complexa.

Abstract The aim of this study was to evaluate the influence of different passive ultrasonic irrigation protocols on the removal of debris in artificially created grooves in the cervical, middle and apical root thirds. Forty extracted bovine incisor roots were instrumented to 1 mm of the root apex with a R50 Reciproc instrument and irrigated with 2.5% sodium hypochlorite. The roots were then inserted in a muffle and cleaved into two hemisections. Grooves (3-mm long) were done at 2, 7 and 12 mm from the root apex in one hemisection and filled with dentinal debris. The hemisections were regrouped into the muffle and divided into 4 groups (n=10) according to the final irrigation protocol: Control group: 3x20 s using a #30 gauge needle without agitation of the irrigating solution; Group PUI-s (static passive ultrasonic irrigation): 3x20 s of passive ultrasonic irrigation with the tip of the insert maintained static on the apical third; Group PUI-t (passive ultrasonic irrigation per third): 20 s of PUI in each third; Group PUI-d (passive dynamic ultrasonic irrigation): 3x20 s of PUI dynamically moving the insert in the whole extent of the root canal. In all groups, was used a total of 6 mL of 2.5% sodium hypochlorite as irrigant. After these procedures, the grooves were analyzed with a stereomicroscope and assigned scores as regards removal of the debris. The data were analyzed statistically (a=0.05). The results showed a better cleaning in all the groups where the irrigating solution was agitated with ultrasonic device than in the control group (p<0.05). In the apical third, the PUI-d and PUI-s showed similar performance (p>0.05) and a better cleanness than PUI-t (p<0.05). The dynamic and static methods of agitation of the irrigating solution provided more effective cleaning. PUI-d provided the most completely clean grooves suggesting that its use is the most adequate in cases of teeth with complex canal anatomy.

Abstract This study aimed to compare apical transportation, centering ratio, and working time during root canal preparation with Wizard Navigator (WN), WaveOne (WO), or ProTaper Universal (PT) and to describe deformation and fracture of these instruments. Thirty-six mesiobuccal roots from maxillary molars were micro-computed tomography (micro-CT) scanned and then sorted into three groups (n = 12): Wizard Navigator (WN), WaveOne (WO), and ProTaper Universal (PT). The root canals were prepared using WN, WO, or PT; the time of each canal preparation was timed; and the specimens were micro-CT re-scanned. The instruments were submitted to scanning electron microscopy (SEM) before and after their use. The data on canal transportation at 1, 2, 3, 4 and 5 mm and preparation time were analyzed by the Kruskal-Wallis test, followed by the Mann-Whitney U test. The centering ratio was analyzed by ANOVA, followed by Tukey’s test. Both instrument deformation and fracture were described. Apical transportation was similar among groups at 1, 2, 3 and 4 mm. The WO group showed higher canal transportation at 5mm than the other groups (p = 0.03). There was no significant difference in centering ratio among the groups. Preparation time in the WO group was significantly lower than in the other groups (p = 0.004). Small differences were observed in the surface area of all instruments. The WN, WO, and PT groups had a similar centering ratio without procedural errors or significant structural changes. At 5 mm from the apex, the WO group showed the largest canal transportation toward the furcation and root canal preparation was faster than in the WN and PT groups.