Abstract A 3-dimensional (3D) printed custom-frame can improve the peripheral seal of readily available surgical/medical masks. This study aimed to assess the acceptance of a 3D-printed custom-frame with the American Society for Testing and Materials (ASTM) surgical/medical masks and the use of a face shield. A total of 206 subjects from a dental school participated, who answered a multiple-choice questionnaire. Participants received an invitation through the institutional email of the school via Qualtrics platform. 3D printed custom-frames were fabricated for each participant. According to their response, participants were divided into 4 groups: mask only (M), mask and frame (MF), mask and face shield (MFS), and all 3 personal protective equipment (MFFS). Data was analyzed in absolute and relative frequency. The acceptance of a 3D-printed custom-frame in the group MFFS varied between ''poor''/''very poor'' (44.7%). It allowed ''good'' performance of routine procedures (40.3%), but ''poor'' visual quality (48.1%). Musculoskeletal tolerance and ease to perform movements were adequate. There was no interference in olfactory sensitivity (44.7%) or in the ability to breathe (34.5%). Finally, it showed "moderate pain" (48.1%) on the ear and "no pain" (38.9%) on the head. The 3D-printed custom-frame adapted to ASTM surgical/medical face masks showed reasonable tolerance. Side effects of ear pain ranging in degrees were noted. Further research is indicated to evaluate safety, comfort, compliance, side effects, and occupational hazards of long-term use of enhanced PPE recommendations.Avoiding the recurrent outbreaks of COVID-19, the use of PPE by the public is necessary. Improper PPE use is a major source of concern for human and environmental health. Preventing such activities can be done by following steps involved in PPE disposals or by getting a new way to re-use such as improving peripherical sealing. Our work highlights that a custom-frame can improve protection, without adverse effects.

Resumen El sellado periférico de las máscaras médicas/quirúrgicas puede ser mejorado fácilmente mediante un marco personalizado impreso en 3 dimensiones (3D). Este estudio tuvo como objetivo evaluar la aceptación de un marco personalizado impreso en 3D cuando usado en combinacion con máscaras médicas/quirúrgicas de la Sociedad Estadounidense para Pruebas y Materiales (ASTM) asi como con el uso de protector facial. Participaron un total de 206 sujetos de una facultad de odontología, quienes respondieron un cuestionario de opción múltiple. Los participantes recibieron una invitación a través del correo institucional de la escuela a través de la plataforma Qualtrics. Se fabricaron marcos personalizados impresos en 3D para cada participante. Según su respuesta, los participantes se dividieron en 4 grupos: solo máscara (M), máscara y marco (MF), máscara y protector facial (MFS) y los 3 equipos de protección personal (MFFS). Los datos se analizaron en frecuencia absoluta y relativa. La aceptación de un marco personalizado impreso en 3D en el grupo MFFS varió entre ''pobre''/''muy pobre'' (44,7%). Permitió un ''buen'' desempeño de los procedimientos de rutina (40,3%), pero una ''mala'' calidad visual (48,1%). La tolerancia musculoesquelética y la facilidad para realizar movimientos fueron adecuadas. No hubo interferencia en la sensibilidad olfativa (44,7%) ni en la capacidad de respirar (34,5%). Finalmente, mostró "dolor moderado" (48,1%) en el oído y "sin dolor" (38,9%) en la cabeza. El marco personalizado impreso en 3D adaptado a las máscaras faciales quirúrgicas/ médicas de ASTM mostró una tolerancia razonable. Se observaron efectos secundarios de dolor de oído que variaron en grados. Estudios futuros deben evaluar la seguridad, la comodidad, efectos secundarios y los riesgos laborales del uso a largo plazo para este tipo de combinación. Para evitar los brotes recurrentes de COVID-19, es necesario el uso de equipamento personal de protección (EPP) por parte del público. El uso inadecuado de EPP es una fuente importante de preocupación para la salud humana y ambiental. La prevención de tales actividades se puede hacer siguiendo los pasos involucrados en la eliminación de EPP o obteniendo una nueva forma de reutilización, como mejorar el sellado periférico. Nuestro trabajo resalta que un marco personalizado puede mejorar la proteccion, sin afectos adversos.

Abstract The aim of this study was to evaluate the observers diagnostic performance in panoramic radiography using monitor, tablet, X-ray image view box, and against window daylight as a visualization method in different diagnostic tasks. Thirty panoramic radiography were assessed by three calibrated observers for each visualization method, in standardized light conditions, concerning dental caries, widened periodontal ligament space, and periapical bone defects from the four first molars; mucosal thickening and retention cysts in maxillary sinus; and stylo-hyoid ligament calcification and atheroma. A five-point confidence scale was used. The standard-reference was performed by two experienced observers. Diagnostic values using window light were significantly lower for caries and periapical bone defect and retention cyst, stylo-hyoid ligament calcification detection (p<0.05). For atheroma detection, X-ray image view box, tablet, and widow light had lower accuracy than the evaluation on the monitor (p<0.05). Observers diagnostic performances are worsened using window light as an evaluation method for panoramic radiography for dental, sinus, and calcification disorders, while the monitor was the most reliable method.

Resumen El objetivo de este estudio fue evaluar el desempeño diagnóstico de los observadores en la radiografía panorámica utilizando monitor, tablet, caja de visualización de imágenes de rayos X y contra la luz del día de la ventana como método de visualización en diferentes tareas de diagnóstico. Treinta radiografías panorámicas fueron evaluadas por tres observadores calibrados para cada método de visualización, en condiciones de luz estandarizadas, con respecto a caries dental, espacio del ligamento periodontal ensanchado y defectos óseos periapicales de los cuatro primeros molares; engrosamiento de la mucosa y quistes de retención en el seno maxilar; y calcificación y ateroma del ligamento estilohioideo. Se utilizó una escala de confianza de cinco puntos. La referencia estándar fue realizada por dos observadores experimentados. Los valores diagnósticos con luz de ventana fueron significativamente menores para caries y defecto óseo periapical y quiste de retención, detección de calcificación del ligamento estilohioideo (p <0.05). Para la detección de ateroma, la caja de visualización de imágenes de rayos X, el tablet y la luz de viuda tuvieron una precisión menor que la evaluación en el monitor (p <0.05). El rendimiento diagnóstico del observador empeora al utilizar la luz de la ventana como método de evaluación de la radiografía panorámica para los trastornos dentales, de los senos nasales y de la calcificación, mientras que el monitor fue el método más fiable.

Resumen Este estudio tuvo como objetivo describir los aspectos imaginológicos de una concha bullosa hallada incidentalmente por medio de imágenes de tomografía computarizada de haz cónico (TCHC). Una paciente de sexo femenino fue sometida a examen de TCHC y se verificó una neumatización extensa bilateral de la concha media, presentando una mayor dimensión del lado derecho, asi como desvío del tabique. El paciente refirió obstrucción nasal y pérdida del olfato. La TCHC de la región maxilofacial permitió localizar este hallazgo incidental, permitiendo derivar al paciente para el tratamiento adecuado.

Abstract This study aimed to describe the imaging aspects of a concha bullosa discovered incidentally by means of cone-beam computed tomography (CBCT) imaging. A female patient underwent a CBCT exam, and a bilateral extensive pneumatization of the middle concha was verified, presenting a larger dimension of the right side and a deviated septum. The patient reported nasal obstruction and loss of smell. The CBCT for covering the maxillofacial region allowed the discovery of this incidental finding, allowing the patient to be referred for appropriate treatment.

RESUMO Embora antes da pandemia houvesse alguma resistência à virtualização da educação odontológica, a pandemia COVID-19 está nos fornecendo uma oportunidade única de superar várias barreiras que anteriormente bloqueavam a adoção do ensino à distância e teledontologia. Graças à ampla disponibilidade de telecomunicações, tecnologias digitais e plataformas, a educação à distância e a teledontologia parecem ser a escolha preferida para manter a educação odontológica e o atendimento ativo aos pacientes durante a pandemia, sem riscos de contaminação. Neste artigo, revisamos estratégias válidas de educação a distância e possíveis alternativas úteis na transformação virtual na educação odontológica. Além disso, o papel do teleodontologia e suas vantagens, assim como também os desafios. No atual contexto pandêmico, como educadores odontológicos, somos chamados a ser criativos e flexíveis. Cada escola de odontologia deve se adaptar e usar a educação à distância, tanto quanto possível, até que a atenção clínica possa ser readotada. As evidências apresentadas nesta revisão corroboram nossa posição de que, sob esta pandemia, a educação a distância e a telemedicina / teleodontologia podem ser “a solução virtual conveniente”, para adaptar e aprimorar a forma até então clássica de ensino de odontologia, agora por meio da teleducação.

ABSTRACT Although prior to the pandemic there was some resistance to the virtualization of dental education, the COVID-19 pandemic is providing us a unique opportunity to overcome several barriers that previously blocked the adoption of remote teaching and teledentistry. Thanks to the extended availability of telecommunications, digital technologies, and platforms, remote education and teledentistry appear to be the preferred choice to maintain dental education and patient care active under this pandemic, without contamination risks. In this paper, we review valid remote education strategies and possible alternatives useful in virtual transformation in dental education. Furthermore, the role of teledentistry and its advantages and challenges are also revised. Under the current pandemic context, as dental educators, we are called to be creative and flexible. Every dental school should adapt and use remote education as much as possible until clinical attention can be readopted. The evidence presented in this review supports our position that under this pandemic, remote education and telemedicine/teledentistry may be “the virtual convenient solution”, to adapt and improve the hitherto classic way of teaching dentistry through tele-education.

SUMMARY Coronavirus disease (COVID-19) is highly transmissible through respiratory droplets, saliva, and aerosol particles. Infection can lead to severe acute respiratory syndrome and trigger multi-organ failure and death. Most clinical dental procedures involve contact with saliva or the generation of aerosols with saliva and blood. These airborne particles increase the risk of transmission by COVID-19 between dentists and patients. Thus, dentistry must adopt procedures to reduce transmission during dental procedures. Although these strategies may not be directly applicable to all institutions due to cultural, social, geographical, and economic differences, the underlying principles and implemented strategies remain relevant and can be adopted or modified by the institutions dealing with the current COVID-19 outbreak. The purpose of this article is to discuss one of the principal sources of COVID-19 transmission: saliva, the biofluid most frequently handled in a radiology environment. The authors also recommend strategies and operational procedures to decrease the spread of COVID-19 in a radiological routine.

RESUMEN La enfermedad por coronavirus (COVID-19) se transmite fácilmente a través de gotitas respiratorias, saliva y partículas de aerosol. La infección puede desencadenar un síndrome respiratorio agudo severo, insuficiencia multiorgánica y, en algunos casos, la muerte. Los procedimientos clínicos dentales determinan el contacto con saliva o la generación de aerosoles con saliva y sangre, lo que implica un alto riesgo de transmisión por COVID-19 entre odontólogos y pacientes. Por ello, la práctica odontologica debe adoptar medidas para detener la propagación durante los procedimientos dentales. En este artículo se revisan las estrategias para mitigar el riesgo de transmisión de COVID-19. Si bien estas estrategias pueden no ser directamente aplicables a todas las instituciones debido a diferencias culturales, sociales, geográficas y económicas inherentes, los principios subyacentes y las estrategias implementadas siguen siendo relevantes y pueden ser adoptados o modificados por las instituciones que se ocupan del brote actual de COVID-19. El propósito de este artículo es discutir una de las principales fuentes de transmisión de COVID-19: la saliva, el biofluido que se maneja con mayor frecuencia en un entorno radiológico. Los autores también recomiendan estrategias y procedimientos operativos para disminuir la propagación de COVID-19 en una rutina radiológica.

Resumo Este estudo avaliou a ação da radiação ionizante e o possível efeito radioprotetor do anti-inflamatório não esteroide meloxicam na fisiologia óssea de mandíbulas de rato por meio da análise da reparação alveolar e da resistência óssea. Quarenta ratos Wistar machos foram divididos em 4 grupos (n=10): controle (GC), irradiado (GI), meloxicam (GM), meloxicam irradiado (GMI). Administrou-se uma dose única de 0,2 mg/kg de meloxicam no GM e GMI. Posteriormente, o GI e GMI foram irradiados com dose de 15 Gy na região de mandíbula. Decorridos 40 dias dos procedimentos acima, extraiu-se os primeiros molares inferiores dos animais, que foram mortos após 15 e 30 dias (n=5). Utilizou-se a microtomografia computadorizada e o teste de flexão para avaliação da reparação alveolar e da resistência óssea, respectivamente. Aos 15 dias, o volume ósseo, a fração de volume ósseo e a espessura trabecular foram maiores no GC e GM comparados ao GI e GMI; já a separação trabecular foi maior no GI em relação aos demais. Aos 30 dias, houve diferença apenas na separação trabecular, que foi maior no GI em comparação ao GC e GM, não tendo o GMI diferido dos demais. A resistência óssea no GI foi menor em relação ao GC e GM, não tendo o GMI diferido dos demais. Concluiu-se que a radiação ionizante afetou a fisiologia óssea das mandíbulas de rato, promovendo atraso na reparação alveolar e redução da resistência óssea; além disso, o meloxicam, apresentou efeito positivo na separação trabecular da reparação alveolar e na resistência óssea.

Abstract This study evaluated the action of ionizing radiation and the possible radioprotective effect of the non-steroidal anti-inflammatory drug meloxicam on the bone physiology of rat mandibles by assessing the alveolar socket healing and bone strength. Forty male Wistar rats were divided in 4 groups (n=10): control (CG), irradiated (IG), meloxicam (MG), meloxicam irradiated (MIG). A dose of 0.2 mg/kg meloxicam was administered to MG and MIG. After this, IG and MIG were irradiated with 15 Gy radiation dose in the mandible. Forty days after the above procedures, the mandibular first molars were extracted and the animals were killed after 15 or 30 days (n=5). Micro-computed tomography and bending test were used to evaluate alveolar socket healing and bone strength, respectively. At 15 days, bone volume, bone volume fraction and trabecular thickness were higher in the CG and MG than in the IG and MIG; and trabecular separation was higher in the IG compared with the others. At 30 days, there was a difference only in trabecular separation, which was higher in IG than in CG and MG, and MIG did not differ from the others. Bone strength was lower in IG compared with CG and MG, and MIG did not differ from the others. In conclusion, the ionizing radiation affected the bone physiology of rat mandibles, delaying the alveolar socket healing and reducing the bone strength. Moreover, the meloxicam had a positive effect on the trabecular separation in alveolar socket healing and on the bone strength.

RESUMO INTRODUÇÃO: A proximidade das raízes com o seio maxilar pode criar uma variedade de riscos. OBJETIVO: Avaliar a relação entre as raízes dos dentes hígidos com o seio maxilar, assim como com a ocorrência de doenças sinusais. MÉTODO: Três radiologistas analisaram 109 imagens de tomografia computadorizada de feixe cônico (TCFC). O teste Kappa avaliou a concordância intra e interexaminadores. Os testes de Qui-quadrado e Razão de Prevalência foram utilizados para testar a hipótese de que raízes de dentes hígidos dentro do seio maxilar favorecem a ocorrência doenças sinusais (nível de significância = 0,01). RESULTADOS: A concordância intra e interexaminadores variou de boa a excelente. O teste Qui-quadrado mostrou uma diferença estatisticamente significante (p = 0,006) entre as raízes dentárias dentro do seio maxilar patológico (6,09%) e aquelas dentro do seio normal (3,43%). O teste de Razão de Prevalência mostrou uma ocorrência de raízes dentárias dentro de seios patológicos estatisticamente maior do que dentro de seios normais (p < 0,0001). As raízes dentro do seio maxilar foram encontradas 1,82 vezes mais associadas a seios patológicos. CONCLUSÃO: Raízes dentárias dentro do seio maxilar são quase duas vezes mais associadas a seios patológicos do que a seios normais. Dentes hígidos que têm raízes dentro do seio maxilar podem induzir uma resposta inflamatória da mucosa sinusal. Suspeita-se que procedimentos odontológicos possam agravar tal situação.

ABSTRACT INTRODUCTION: The proximity of the roots to the maxillary sinus can create a variety of risks. OBJECTIVE: To evaluate the relationship between the roots of healthy teeth and the maxillary sinus, as well as the occurrence of sinus pathologies. METHODS: Three radiologists analyzed 109 cone beam computed tomography (CBCT) images. The Kappa test was used to assess the intra- and inter-rater agreement. The chi-squared test and prevalence ratio were used to test the hypothesis that roots of healthy teeth in the maxillary sinus favored the occurrence of sinus pathologies ( p = 0.01). RESULTS: Intra- and inter-rater agreement ranged from good to excellent. The chi-squared test demonstrated a statistically significant difference ( p = 0.006) between the tooth roots in diseased maxillary sinuses (6.09%) and those in normal sinuses (3.43%). The prevalence ratio test showed a statistically significant higher prevalence of tooth roots in diseased sinuses than in normal sinuses ( p < 0.0001). Roots in the maxillary sinus were 1.82 times more associated with diseased sinuses. CONCLUSION: Dental roots in the maxillary sinus are almost twice as likely to be associated with diseased sinuses than normal sinuses. Healthy teeth whose roots are inside the maxillary sinus may induce an inflammatory response in the sinus membrane. It is suspected that dental procedures may exacerbate the condition.

There is now wide acceptance in medicine and dentistry that clinical practice should be as "evidence-based" as possible. Which is why many works have been published aimed at reducing radiation doses in different types of imaging modalities in dentistry, and that the major effect of radiation especially in children requires us to take necessary steps to rationalize their use especially the Cone Beam Computed Tomography (CBCT) method that provides the highest doses in dentistry. This review was written using this approach because of the purpose of streamlining the radiation dose in our patients. SEDENTEXCT team collected and analyzed relevant publications in the literature, guidelines that have proven effective in the past to reach recommendations, which can contribute to optimizing the use of ionizing radiation in dentistry, helping to see with others eyes the dose received by our patients. This paper recommend to consider the SEDENTEXCT project to prescribe more appropriately complementary exams we use daily

En la actualidad existe una gran aceptación por la medicina y la odontología, en que la práctica clínica debe ser "basada en evidencia científica", tanto como sea posible. Es por eso que múltiples trabajos se han publicado orientados a disminuirlas dosis de radiación en los diferentes tipos de modalidades imaginológicas usados en la odontología, ya que el mayor efecto de las radiaciones, sobre todo en niños, nos obliga a tomar medidas necesarias para racionalizar su uso, especialmente con la tomografía computarizada Cone Beam (TCCB), método que aporta las mayores dosis en la odontología. Esta revisión fue escrita utilizando un enfoque de este tipo con el propósito de racionalizar la dosis de radiación en nuestros pacientes. El equipo del proyecto SEDENTEXCT recopiló y analizó relevantes publicaciones en la literatura, pautas que han demostrado su eficacia en el pasado, para llegar a formular recomendaciones que contribuyan a la optimización del uso de las radiaciones ionizantes enla odontología, ayudando de esa manera a ver con otros ojos la dosis recibida por los pacientes, y con la presente se recomienda tener en cuenta dicho documento para poder prescribir de manera más adecuada los exámenes complementarios que usamos diariamente.

<sec><title>Aim:</title><p>To compare the qualitative and quantitative information yielded by imaging modalities on the evaluation of the relationship between the maxillary sinus and the apices of posterior teeth.</p></sec><sec><title>Methods:</title><p>Three oral radiologists examined 109 panoramic radiographs and cone-beam computed tomography (CBCT) images obtained from a digital archive. A total of 1,875 apices were classified according to their topographic relationship in both imaging modalities. Agreements between the two imaging techniques were examined statistically. The evaluation was repeated in 25% of the sample to statistically evaluate the intraobserver agreement, with a 30-day interval.</p></sec><sec><title>Results:</title><p>The values found in the Kappa test for qualitative assessment and the intraclass correlation coefficient (ICC) for quantitative assessment showed nearly perfect and excellent correlation, respectively. Regarding the correlation between the two images, the Kappa test in the quality assessment showed a slight correlation between the palatal roots of the right first molars and second molars. Moreover, the quantitative evaluation by ICC showed poor agreement for the palatal roots of the left first molar and second molar, as well as for the buccomesial of the right second molars and for the buccodistal of the left second molars.</p></sec><sec><title>Conclusions:</title><p>There is low correlation between panoramic radiography and CBCT when roots are in contact or above the maxillary sinus floor. A high level of agreement was observed when roots are below the maxillary sinus floor.</p></sec>

New techniques have been accompanying the development of dentistry and seek to overcome obstacles present nowadays. The Rapid Prototyping (RP) was inserted into the dentistry in order to assist procedures, minimize risk and reduce the surgical time. From Computed Tomography exams and Magnetic Resonance, are been created design assisted by a specific computer, then processed in its own language; so from there, such designs are transformed into physical objects in 3 dimensions (prototype), trusted in the initial model created in the computer. There are many techniques for production of 3D models, varying the type of material that will be added by the process of adding layers. Many areas were benefited by the PR, however Surgery, Implantology, Orthodontics and Prosthodontics, absorbed the principles of this technique which is helping significantly in their daily practice. The benefits of PR are undisputed, whether in the reduction of surgical risks, precision maneuvers, and gain time in the trans-operative period, cosmetic procedures and in the communication between the dentist and the patient. The disadvantages of the technique are also reported as high initial cost and considerable time preparing the prototype. What has been observed is that this PR is becoming increasingly present in the dental practice and the benefits are overcoming some disadvantages still persistent.

Nuevas técnicas van acompañando la evolución de la odontología y buscan superar obstáculos presentes en la actualidad. El prototipado rápido (PR) fue insertado en el medio odontológico con el propósito de auxiliar procedimientos, minimizar riesgos y disminuir el tiempo quirúrgico. A partir de exámenes tomográficos y de resonancia magnética, son creados diseños asistidos por medio de un computador específico, luego de ello son transformados en un lenguaje propio, para que a partir de ahí, estos diseños sean transformados en objetos físicos en 3 dimensiones (prototipos), fieles al modelo inicial hecho en la computadora. Existen muchas técnicas para la confección de los modelos 3D, variando el tipo de material que se añadirá, por el proceso de adición en capas. Muchas son las áreas beneficiadas por el PR; sin embargo, cirugia, implantología, prótesis y ortodoncia, asimilaron más los principios de esta técnica la cual está ayudando de manera significativa en su práctica diaria. Los beneficios del PR son numerosos, sea en la disminución de riesgos quirúrgicos, precisión de maniobras, disminución de tiempo transoperatorio, estética en los procedimientos y hasta en la comunicación entre el cirujano dentista y el paciente. Las desventajas de la técnica incluyen el elevado costo inicial y un considerable tiempo de preparación del prototipado. Lo que se viene observando es que el PR se está convirtiendo cada vez más de uso cotidiano odontológico y sus beneficios superan algunas desventajas aún persistentes.

Cone Beam Computed Tomography (CBCT) is a rapidly evolving technology that provides high spatial resolution of the craniofacial complex in three dimensions (3D). During the last decade, the number of publications related to CBCT in the literature has increased significantly, but the fundamental question is whether this technology leads to better results. CBCT and the application in orthodontics is very important as this new technology evolves ever faster and new images are needed to answer some cases, for example cases of recurrence. The tomographic image will allow us to give a different view compared to conventional images, and this view goes hand in hand with the movements for correcting malocclusion or facial disproportion

La Tomografía Computarizada Cone Beam (TCCB) es una tecnología en rápido desarrollo que proporciona imágenes de alta resolución espacial del complejo craneofacial en tres dimensiones (3D). Durante la última década, el número de publicaciones relacionadas a la TCCB en la literatura se ha incrementado de manera significativa, pero la cuestión fundamental es si esta tecnología conduce a mejores resultados. La TCCB y su aplicación en la ortodoncia es muy importante ya que esta nueva tecnología va evolucionando cada vez más rápido y nuevas imágenes se necesitan para responder algunos casos como los de recidiva. La imagen tomográfica nos va permitir tener una visión diferente comparando con las imágenes convencionales, y esta visión va de la mano con los movimientos realizados para la corrección de la maloclusión o desproporción facial.

Aim: To evaluate the reliability of linear measurements in virtual models by comparing measurements performed on virtual models obtained from alginate impression scans, plaster model and measurements performed on conventional plaster model. Methods: The sample comprised 26 randomly selected patients to have impressions of their upper and lower jaws taken using alginate and their bite registration using a wax bite. The virtual models were obtained by scanning the alginate impression and the plaster model in a laser surface scanner (R700; 3Shape, Copenhagen, Denmark), and the measurements were performed using the Ortho Analyser (3Shape) proprietary software. The linear measurements of the size of the teeth mesial to distal, arch perimeter, intercanine distance and intermolar distance in the upper and lower arches were performed on plaster models, digital impressions and digital models, by three observers and repeated after 15 days on 8 models for intra-observer evaluations. Data were tabulated and analyzed statistically. Intra-class correlation to check the agreement of intra and inter-observers and ANOVA test were used to analyze the differences between measurements of digital models from impression and digital models from plaster. Results: The results showed a statistically significant difference (pd"0.05) for the posterior teeth, anterior teeth, upper arch perimeter and lower inter-canine distance, comparing the digital models with plaster models, but these differences are considered clinically non-significant. Conclusions: Digital models were proven be reliable and clinically acceptable for measuring tooth width, perimeter arches, intercanine and intermolar distances.

The mandibular canine is a robust and long tooth which allows an adequate implantation in the dental arch. It is considered a valuable pillar in many rehabilitating treatments. In order to maintain this important dental element, it is necessary to make a correct diagnosis, for which the knowledge of the different anatomic variations should be kept in mind. The objective of this article is to present a case of a mandibular canine with two roots with their respective root canals. A 21-year-old female patient went to the Radiology Clinic at the Faculty of Odontology of Piracicaba with the indication of a panoramic radiography for preoperative third molars surgery. An unusual root configuration of the mandibular canines was observed. In the cone beam CT, it was observed that the right mandibular canine presented two separate roots, each one with their respective radicular canals. It was concluded that, despite of the low prevalence of anatomical variations, these can occur in the root system of the mandibular canines, as presented in this case report.

El canino inferior es un diente con raíz larga y ancha que le permite una adecuada implantación en el arco dentario. Es considerado un pilar valioso en muchos tratamientos rehabilitadores. Con la finalidad de mantener este elemento dentario es necesario realizar un correcto diagnóstico, para lo que se tendrá en cuenta el conocimiento de las variaciones anatómicas. El objetivo del artículo es presentar un caso de canino mandibular con dos raíces con sus respectivos canales radiculares .Paciente femenina de 21 años, que acudió a la Clínica de Radiología de la Facultad de Odontología de Piracicaba con indicación de una radiografía panorámica para valorar cirugía de terceros molares. Llamó la atención una configuración inusual de las raíces de los caninos mandibulares. En el examen de tomografía computarizada de haz cónico se observó que el canino mandibular del lado derecho presentaba dos raíces separadas, cada una con sus respectivos canales radiculares. Se concluyó que a pesar de la baja prevalencia de las variaciones anatómicas, estas pueden ocurrir en el número de raíces y canales de los caninos mandibulares, tal como se presenta en este reporte de caso.

AIM: To compare panoramic radiography and cone beam computed tomography (CBCT) in the diagnosis of bifid mandibular condyle. METHODS: The sample consisted of 350 individuals who underwent panoramic radiography and CBCT. In the panoramic radiographs and CBCT images, the presence or absence of bifid mandibular condyle was determined. RESULTS: Presence of bifid mandibular condyle was detected in four cases (1.1%). In all cases, the relation of one condylar process to the other was mediolateral and history of trauma was reported. None of the individuals had symptoms. In two cases, panoramic radiography did not reveal the presence of bifid mandibular condyle. CONCLUSIONS: Initial screening for bifid mandibular condyle can be performed by panoramic radiography; however, CBCT images can reveal morphological changes and the exact orientation of the condyle heads.