ABSTRACT Materials from renewable sources have been increasingly used in construction to assist in sustainable development. Therefore, the use of timber becomes an environmentally advantageous solution, especially if used for long-term purposes, such as in structures. In this sense, this study aimed to evaluate the performance of glued-laminated timber frames reinforced in their main connections. The structures were made using timber from the Araucaria angustifolia species and polyurethane adhesive based on vegetable oils. The frames, on a reduced scale, had a pillar height and free span of 2 m and were reinforced in the connections between the roof beams and pillars. The rupture strength values of the structures averaged 38.02 kN, approximately 5.47 times the design load, and represented a 32% increase in strength compared to non-reinforced structures. The displacements did not reach the normative limit for the design load and presented a linear behavior for strengths higher than three times those of the design. The structures presented satisfactory structural behavior and had an improvement in resistance and rigidity caused by the addition of reinforcements. development Therefore solution longterm long term purposes sense gluedlaminated glued laminated oils scale pillars 3802 38 02 38.0 kN 547 5 47 5.4 32 nonreinforced non reinforcements 380 3 0 38. 54 4 5.

ABSTRACT This study aimed to present a solution in glued laminated timber to replace frame structures built in reinforced concrete and metallic structure, which are common in agricultural buildings in western Paraná such as those destined to laying poultry house building by agricultural cooperatives. Structural behavior of frames build from Araucaria angustifolia glued boards and vegetable oil-based polyurethane adhesive was evaluated. Tests were carried out to characterize wood and adhesive to obtain verification/sizing parameters. Initially, a full-scale structural project was conducted to meet standard laying poultry house specifications. Afterwards, five units of straight three-articulated frames on a 1:2.5 reduced scale were designed, built, and subjected to strength tests until breaking. They were built with a 2-meter free span and a 15° slope, suitable for using metal roof tiles. The average for structure ultimate strength was 4.14 times the design load. Structures had satisfactory mechanical performance and displacements lower than those recommended by NBR 7190 (1997) standard (ABNT). Therefore, building glued frames with Parana pine boards and vegetable oil-based glue is technically feasible.