Resumo Nematoides entomopatogênicos (NEP) das famílias Heterorhabditidae e Steinernematidae são amplamente utilizados no controle de insetos-pragas. No Brasil, os estudos relacionados a caracterização e identificação destes entomopatógenos são recentes e escassos. Nesse sentido, o objetivo deste estudo foi isolar NEP de amostras de solos coletadas em diferentes áreas no estado do Paraná, Brasil. Um isolado Heterorhabditis (UEL 08) detectado em amostra de solo em área de pastagem cultivada com braquiária, localizada em Londrina, Paraná, Brasil (23º34´311´´S, 050º58´298´´W), utilizando o método de “inseto-isca” com lagartas de Galleria mellonella. Para a identificação foram realizados estudos de morfometria e identificação molecular a partir da amplificação da região ITS. Algumas diferenças foram encontradas em termos de morfometria em comparação com a descrição original, entretanto, os dados moleculares demonstraram que a sequência obtida para o isolado UEL 08 é idêntica à sequência de referência de H. amazonensis (DQ665222), com a qual apresentou 100% de similaridade. Os estudos das características biológicas de H. amazonensis (UEL 08) revelaram que o isolado tem dois ciclos de vida distintos, um curto (216 h) e outro longo (288 h), sendo que ocorrem duas gerações em ambos os ciclos. O isolado UEL 08 H. amazonensis foi patogénico e virulento sobre os três hospedeiros avaliados. Notadamente, as larvas de G. mellonella e Alphitobius diaperinus foram consideradas mais susceptíveis do que os adultos do percevejo Dichelops (Diacereus) melacanthus, com percentagens de mortalidade de 100%, 85% e 46% de mortalidade, respectivamente. O ensaio de produção in vivo revelou um rendimento médio diário de 3,4 × 103 juvenis infectantes/g de larva hospedeira.

Abstract Entomopathogenic nematodes (EPNs) from Heterorhabditidae and Steinernematidae families are extensively used to control insect pests. In Brazil, however, relatively few studies have identified and characterized these entomopathogens. The objective of this study was to identify and characterize an EPN isolate obtained from soil samples collected in the state of Paraná, Brazil. An isolate (UEL 08) of Heterorhabditis was detected in a soil sample collected from a pasture area cultivated with Brachiaria grass in Londrina, state of Paraná, Brazil (23°34ʹ311ʹʹS, 050°58ʹ298ʹʹW), using the insect-baiting technique with Galleria mellonella larvae as hosts. The nematode was identified through morphometric studies and molecular analyses based on amplification of the rDNA ITS region. Although we identified certain morphometric differences compared with the original description, the molecular data indicated that the ITS sequence obtained for the UEL 08 isolate is identical to the reference sequence of H. amazonensis (DQ665222) and presented 100% similarity. Thus, the findings of our morphological and molecular studies confirmed that the isolated nematode is H. amazonensis, which is the first time this species has been registered in Paraná. Study of the biological characteristics of H. amazonensis (UEL 08) revealed that the isolate has two distinct life cycles – one short (216 h) and the other long (288 h) – and produces two generations in both cycles. We observed that H. amazonensis (UEL 8) was pathogenic and virulent to the three evaluated hosts, although with different virulence against these hosts. The larvae of G. mellonella and Alphitobius diaperinus were more susceptible than adult Dichelops (Diacereus) melacanthus, with 100%, 85%, and 46% mortality, respectively. Furthermore, an in vivo production assay revealed a mean daily yield of 3.4 × 103 infective juveniles/g host larvae.

Resumo Em todo o mundo, a agricultura convencional faz uso extensivo de pesticidas. Embora os efeitos dos herbicidas sejam relativamente bem conhecidos em termos de impactos ambientais em organismos não-alvo, há pouca evidência científica sobre os impactos de resíduos de herbicidas em artrópodes aquáticos de áreas de conservação tropicais. Este estudo avalia pela primeira vez a toxicidade dos herbicidas ametryn, atrazine e clomazone sobre o inseto aquático Limnocoris submontandoni (Hemiptera: Naucoridae). A concentração letal (LC50) de herbicidas foi avaliada para esses insetos, bem como o efeito dos herbicidas nos tecidos e testículos dos insetos. A LC50 estimada foi de 1012,41, 192,42 e 46,09 mg/L para clomazone, atrazine e ametryn, respectivamente. Alterações nos espermatócitos e espermátides foram observadas sob o efeito de atrazine, e efeitos na espermatogênese foram observados para algumas concentrações de clomazone, com aparente recuperação após um curto período de tempo. Nossos resultados fornecem informações úteis sobre os efeitos de resíduos de herbicidas em sistemas aquáticos. Essas informações podem ajudar a minimizar o risco de efeitos reprodutivos de longo prazo em espécies não-alvo que foram negligenciadas anteriormente em estudos de ecotoxicologia.

Abstract Worldwide, conventional agriculture makes extensive use of pesticides. Although the effects of herbicides are relatively well known in terms of environmental impacts on non-target organisms, there is very little scientific evidence regarding the impacts of herbicide residues on aquatic arthropods from tropical conservation areas. This study evaluates for the first time the toxicity of the herbicides ametryn, atrazine, and clomazone on the aquatic insect Limnocoris submontandoni (Hemiptera: Naucoridae). The lethal concentration (LC50) of herbicides was evaluated for these insects, as well as the effect of the herbicides on the insects’ tissues and testicles. The estimated LC50 was 1012.41, 192.42, and 46.09 mg/L for clomazone, atrazine, and ametryn, respectively. Spermatocyte and spermatid changes were observed under the effect of atrazine, and effects on spermatogenesis were observed for some concentrations of clomazone, with apparent recovery after a short time. Our results provide useful information on the effects of herbicide residues in aquatic systems. This information can help minimize the risk of long-term reproductive effects in non-target species that have been previously overlooked in ecotoxicology studies.

The worldwide emergence of viral diseases such as Zika, Dengue, Chikungunya, West Nile and Yellow Fever urge the search for solutions to eliminate their common vector, the Aedes aegypti mosquito. This paper describes the quantitative structure-activity relationship (QSAR) and docking studies of a series of nine 3-(3-aryl-1,2,4-oxadiazol-5-yl)propionic acids (AOPA), 1-9, previously published by our group. Additionally, three new 1,2,4-oxadiazoles, 10-12, have also been synthesized, characterized and studied. The QSAR and docking studies of all compounds, 1-12, clearly indicate that larger hydrophobic substituents such as biphenyl groups attached on position 3 in 1,2,4-oxadiazoles improve the larvicidal activity. It is worthwhile to mention that nanocapsulation of compounds 10-12 were necessary to help their dissolution in water and these three new 1,2,4-oxadiazoles also exhibited approximately equal or higher larvicidal activities compared to the former prototypes at stage L4.

Abstract Leishmaniasis is an anthropozoonosis transmitted by vectors, with dogs being the main domestic reservoirs. Brazil is one of the countries most affected by this disease, and it has been described in humans and dogs in every region in the country. In the northern region leishmaniasis cases in humans have been described in more than 100 municipalities in the State, including the capital, Belém. This study involves two cases of canine visceral leishmaniasis in which the animals developed clinical signs compatible with the disease in urban areas in Belém, the Pará state capital. The diagnosis was confirmed via polymerase chain reaction (PCR) to detect SSUr-rDNA and kDNA of Leishmania sp. and Leishmania infantum, respectively. In one of the cases the animal died and in the other the animal underwent treatment with medicines prescribed for dogs. Through this treatment, parasitemia in the second animal has been kept under control and is being monitored through molecular tests. Previously, no canine cases had been notified from urban neighborhoods in the city of Belém, but only on the island of Cotijuba, at a distance of 29 kilometers from the city. Cases of canine and human leishmaniasis have been recorded close to the capital, Belém, which has areas of conserved vegetation and where the presence of disease vectors has been described. Thus, as has been done in several other Brazilian cities, this study uses clinical and laboratory findings to confirm the presence of autochthonous cases of canine visceral leishmaniasis in the city of Belém.

Resumo A leishmaniose é uma antropozoonose transmitida por vetores, sendo os cães os principais reservatórios domésticos. O Brasil é um dos países mais acometidos por esta doença, sendo descrita em humanos e cães em todas as regiões do país. Na região norte casos de leishmaniose em humanos foram descritos em mais de 100 municípios do Estado, incluindo a capital, Belém. Este estudo envolve dois casos de leishmaniose visceral canina em que os animais desenvolveram sinais clínicos compatíveis com a doença em áreas urbanas de Belém, capital do estado do Pará. O diagnóstico foi confirmado pela reação em cadeia da polimerase (PCR) para detectar o SSUr-rDNA e kDNA de Leishmania sp e Leishmania infantum, respectivamente. Em um dos casos o animal veio a óbito e no outro o animal foi submetido a tratamento com medicamentos prescritos para cães. Por meio desse tratamento, a parasitemia no segundo animal foi mantida sob controle e está sendo monitorada por meio de testes moleculares. Anteriormente, nenhum caso canino havia sido notificado em bairros urbanos da cidade de Belém, apenas na ilha de Cotijuba, distante 29 quilômetros da cidade. Casos de leishmaniose canina e humana foram registrados próximo à capital, Belém, que possui áreas de vegetação conservada e onde foi descrita a presença de vetores de doenças. Assim, como tem sido registrado em várias outras cidades brasileiras, este estudo utiliza achados clínicos e laboratoriais para confirmar a presença de casos autóctones de leishmaniose visceral canina na cidade de Belém.

Abstract Alumina is a polymorphic bioceramic that has been extensively investigated for application in bone regeneration. Dense α-alumina has been considered a suitable biomaterial for dental and orthopedic implants due to its superior mechanical properties. However, its use is limited due to its high inertia in a biological environment. Recent investigations have focused on its distinct phases and surface characteristics through the control of morphology, physical properties, and chemical composition to enhance bioactivity. This article presents a brief review of the developments in porous α-alumina and amorphous-γ-alumina transition. Most studies have shown that composites and alumina coated with bioactive materials, high surface area, and hydroxylated surface can significantly improve biological properties. Cellular responses such as fixation, growth, and proliferation, as well as biomineralization, are the main studies to validate improvements in bioactive properties.

Abstract This work produced glass foams from soda-lime glass bottles, bentonite, and alumina by the replica method. Compositions with different contents of bentonite (5, 10, 15, and 20 wt%) were prepared and heat-treated at 800 °C. In the alumina-added compositions, 50 wt% of the bentonite was replaced by the alumina. The influences of the content of bentonite (binder) and alumina addition were evaluated through the physical-mechanical properties. The results showed that the alumina did not promote a significant effect on physical and mechanical properties in most glass foams; the exception was the sample with 20 wt% bentonite+alumina, which presented better physical properties (lower linear shrinkage and density and greater porosity) when compared to its equivalent sample (without alumina). Foams with 5% of bentonite or bentonite+alumina showed higher linear shrinkage indexes and high densification. Samples with 15% of bentonite or bentonite+alumina showed the best combination of properties: higher porosity (79.2% and 80.2%), water absorption (58.8% and 59.7%), lower shrinkage index (25.5% and 29.4%), and good flexural strength (0.69 and 0.45 MPa).

Abstract Titanium dioxide (TiO2) has attracted interest for sensory applications due to its high surface area and the high density of active adsorption sites. This review shows the effect of the nanostructure, synthesis technique, operating temperature, target gas, and the impact of incorporating metallic elements on the detection properties of TiO2. The studies showed that the TiO2 gas detection process is closely related to surface reactions. Therefore, sensing properties, such as sensitivity, response time, and recovery, vary with factors that influence the surface reactions, such as chemical elements, morphology, microstructure of the depletion layer, and operating temperature.

Abstract Multiphasic calcium phosphate powders were synthesized by the acidic route, using lactic acid as a chelating agent that allows the production of a stable and rich solution of calcium and phosphate ions at room temperature. After pH adjusting, without varying the concentrations of precursor solution, XRD and FTIR analyses showed different CaP phases before and after heat treatment at 1000 °C. At pH 5, brushite plate-like particles were produced, while at higher pH levels (7 to 12) nano-hydroxyapatite particles were formed. After the calcination process, partial and total decomposition of hydroxyapatite in the β-TCP phase was explained by XRF analysis due to the calcium-deficient hydroxyapatite of synthesized samples at pH 7 and 10. This work presents an important method to synthesize any desired CaP phase compositions by varying the pH level and subsequently performing heat treatment, which has a direct effect on morphology, crystallinity, and formation of different CaP powders.

Seventeen Schiff bases bearing 2-aminothiophene derivatives were designed and synthesized using molecular simplification. The resulting compounds (4a-4q) were evaluated for their in vitro antifungal activity against dermatophytes. Prediction of their druglikeness and pharmacokinetic properties, establishment of their structure-activity relationships (SAR), and cytotoxic evaluation of the most active compounds were performed. Using an eco-friendly procedure, microwave assisted synthesis resulted in compounds in good yields (35-85%). Compounds 4a-4q presented good druglikeness and pharmacokinetic profiles and no cytotoxicity for any cell line tested up to 100 µM. The compounds presenting the best antifungal profiles were 4e, 4f, 4g, 4k, 4l, 4m, 4o and 4p with more than one minimum inhibitory concentration (MIC) value occurring between 16-64 µg mL-1, thus, in some cases better than the reference drug (fluconazole). SAR testing indicated that the presence of halogens and nitro substituents increases antifungal activity. Taken together, the results demonstrate that 2-aminothiophene derivatives are promising lead compounds for the development of antifungal drugs.

Abstract In recent years there is a high interest in the freeze-casting process because it is a simple, economical, and environmentally friendly method for obtaining highly porous materials. Most of the materials obtained by this technique have directional pore structure and anisotropic properties. However, a wide range of pore size and morphology can be obtained by the control of processing parameters, such as solvent type, solids concentration, particle size, freezing rate, and types of additives. The varied morphologies permit the application of freeze-casted materials in various technological applications. However, despite the high amount of studies about freeze-casting of ceramic materials in the last years, review articles addressing the influence of processing parameters on the pore characteristics of obtained ceramics are still scanty. Therefore, this review addresses the influence of freeze-casting process parameters on the pore characteristics of the ceramic materials.

Resumo O objetivo deste trabalho foi avaliar a morfologia interna de sementes de Campomanesia pubescens (Mart. ex DC.) O.Berg com diferentes teores de água por meio de análise de imagens de raios-X, e correlacionar as imagens com a germinação dessas sementes. Os frutos foram coletados no município de Jataí, Goiás, Brasil, e levados ao Laboratório de Sementes do Instituto Federal Goiano, Campus Rio Verde, onde foram processados e as sementes foram extraídas. Para estabelecer o teor de água predeterminado (43%, 37%, 34%, 31% e 28% base úmida), as sementes com um teor inicial de água de 43% foram mantidas em estufa com circulação de ar induzida, a uma temperatura de 40 °C até atingirem os níveis de conteúdo de água predeterminados. Em seguida, as sementes foram colocadas em suportes acrílicos com fita dupla face e transportadas para a Universidade Federal de Lavras (UFLA), onde foram expostas a diferentes intensidades de radiação. O teste de raios-X foi realizado com 200 sementes por tratamento, e imagens das estruturas internas das sementes foram avaliadas. As sementes foram devolvidas ao Laboratório de Sementes do Instituto Federal Goiano, Campus Rio Verde, onde foi iniciado o teste de germinação. O delineamento experimental foi inteiramente casualizado, em esquema fatorial (5 × 4), no qual foram encontrados cinco níveis de umidade e quatro classes de sementes, com quatro repetições. O teste de raios-X foi eficiente na identificação de sementes preenchidas, malformadas, danificadas e vazias, com taxas de germinação acima dos 50% nas sementes cheias. Essa visualização das morfologia interna da semente pode ser útil para selecionar sementes de melhor qualidade, melhorando a porcentagem de germinação das sementes de C. pubescens.

Abstract The objective of this study was to evaluate the internal morphology of seeds of Campomanesia pubescens (Mart. ex DC.) O. Berg with varying water content through X-ray image analysis, and correlate the images with the germination of these seeds. Fruits were collected in Jataí, Goiás, Brazil, and taken to the Seed Laboratory of the Federal Institute Goiano, Rio Verde Campus, where they were processed and the seeds were extracted. To establish the predetermined water content (43%, 37%, 34%, 31%, and 28% wet basis), seeds with an initial water content of 43% were kept in an oven with forced air circulation at a temperature of 40 °C until they reached the predetermined water content levels. Next, the seeds were placed in acrylic holders with double-sided tape and transported to the Federal University of Lavras (UFLA), where they were exposed to different intensities of radiation. The X-ray test was conducted with 200 seeds per treatment, and images of the internal structures of the seeds were evaluated. The seeds were returned to the Seed Laboratory of the Federal Institute Goiano, Rio Verde Campus, where the germination test was initiated. The experimental design was completely randomized, in a factorial design (5 × 4), in which there were five water content levels and four seed classes, with four replications. The X-ray test was efficient in the identification of filled, malformed, damaged and empty seeds, which germination rate above 50% in the filled seeds. This visualization of the internal morphology of the seed can be useful to select seeds of better quality, improving the percentage of germination of C. pubescens seeds.

Resumo Novos depósitos de argila bentonítica foram descobertos no estado brasileiro da Paraíba, sendo o mais recente no município de Olivedos. Estudos recentes descobriram a presença de altos níveis de minerais não argilosos que podem produzir resultados insatisfatórios ao tentar usar essas argilas em fluidos de perfuração. Para torná-los adequados para esse fim, utilizaram-se MgO e CaCl2 como aditivos químicos e analisaram-se suas influências nas propriedades reológicas dessas argilas, utilizando técnica de planejamento experimental e análise estatística. As amostras foram obtidas utilizando modelagem experimental pela técnica de delineamento de misturas; inicialmente as argilas foram transformadas com compostos de sódio e posteriormente dosadas com MgO e CaCl2. As propriedades reológicas, viscosidade aparente (AV) e viscosidade plástica (PV), foram determinadas de acordo com a normativa da Petrobras (AV≥15 cP; PV≥4 cP). Os resultados mostraram que os valores de AV e PV aumentaram consideravelmente e que o MgO foi o aditivo que mais contribuiu para a melhoria dessas propriedades, tornando-os adequados para uso em fluidos de perfuração à base de água.

Abstract New deposits of bentonite clays have been discovered in the Brazilian State of Paraíba; the most recent was at the municipality of Olivedos. Recent studies have discovered the presence of high levels of non-clay minerals that can produce unsatisfactory results when attempting to use these clays in drilling fluids. In order to make them suitable for this purpose, the MgO and CaCl2 as chemical additives were used and their influences on the rheological properties of these clays were analyzed, using an experimental planning technique and statistical analysis. The samples were obtained using experimental modeling by the delineation of mixtures technique; first, the clays were transformed with sodium carbonate and then dosed with MgO and CaCl2. The rheological properties, apparent viscosity (AV) and plastic viscosity (PV) were determined according to the Petrobras standard (AV≥15 cP; PV≥4 cP). The results showed that the values of AV and PV increased considerably and that MgO was the additive that contributed most to the improvement of these properties, making these additives suitable for use in water-based drilling fluids.

Resumo No Brasil, as argilas bentoníticas não são naturalmente sódicas e é uma prática industrial a aditivação sódica, uma vez que o íon de sódio expande suas lamelas permitindo a penetração de uma maior quantidade de água. O objetivo foi analisar as influências da adição do carbonato de sódio na argila durante o processo de aditivação, do teor de umidade e do tempo de cura na troca de cátions e viscosidade de dispersões de argilas bentoníticas para fluidos de perfuração à base de água, uma vez que há escassez de estudos neste tema. Argilas bentoníticas recém descobertas do estado da Paraíba, Brasil, foram caracterizadas química, física e mineralogicamente e aditivadas com carbonato de sódio em solução aquosa (processo 1) ou na forma de pó (processo 2). Amostras com 25% a 60% de umidade (base seca) foram preparadas e submetidas a tempos de cura de 7 a 45 dias. O processo 1, como esperado, apresentou melhores resultados de troca catiônica, viscosidade e volume de filtrado. O tempo de cura ideal foi de 15 dias. Após esse período houve reversão das reações de troca de cátions.

Abstract In Brazil, bentonite clays are not naturally sodic and it is an industrial practice the sodium additivation, since sodium ion expands their lamellae allowing a larger amount of water to penetrate. The objective was to analyze the influences of the use of sodium carbonate on the clay during the additivation process, the moisture content and the cure time on cation exchange and viscosity of bentonite clay dispersions for water-based drilling fluids, since there is a shortage of studies on this subject. Newly discovered bentonite clays in Paraíba State, Brazil, were chemically, physically and mineralogically characterized and were additivated with sodium carbonate in aqueous solution (process 1) or in powder form (process 2). Samples with 25% to 60% of moisture (dry basis) were prepared and submitted to cure times of 7 to 45 days. Process 1, as expected, showed better results of cation exchange capacity, viscosity and filtrate volume. The ideal cure time was 15 days. After this period there was a reversal of the cation exchange reactions.

Resumo Este trabalho teve como objetivo avaliar a potencialidade das argilas do estado da Paraíba, visando suas aplicações em tratamentos medicinais, terapêuticos e estéticos. As amostras das argilas foram caracterizadas pelas técnicas de difração de raios X, composição química por fluorescência de raios X, termogravimetria, análise térmica diferencial, análise granulométrica por difração a laser, capacidade de troca catiônica e atividade antimicrobiana. Com base no estudo, concluiu-se que as argilas do estado da Paraíba apresentaram propriedades similares à argila comercial. A avaliação antimicrobiana revelou que as amostras não apresentaram atividade frente a três cepas bacterianas de interesse clínico: Staphylococcus epidermidis ATCC 12 228, Staphylococcus aureus ATCC 25 923 e Escherichia coli ATCC 25 922. Por fim conclui-se que as argilas estudadas possuem potencial tecnológico para aplicações em tratamentos medicinais, terapêuticos, estéticos e como matéria-prima para obtenção de biomateriais, em virtude da sua estabilidade e segurança biológica.

Abstract This study aimed to evaluate the potential of clays from the State of Paraíba to be used for medicinal, therapeutic and aesthetic treatments. The samples were characterized by X-ray diffraction, X-ray fluorescence chemical composition, thermogravimetry, differential thermal analysis, laser diffraction granulometric analysis, cation exchange capacity, and antimicrobial activity. Based on the study, it was concluded that the clays from the State of Paraíba had properties similar to those of commercial clay. The antimicrobial evaluation revealed that the samples showed no activity against the three bacterial strains of clinical interest: Staphylococcus epidermidis ATCC 12 228, Staphylococcus aureus ATCC 25 923, and Escherichia coli ATCC 25 922. Finally, it was concluded that the clays studied have the potential for technological applications in medicinal, therapeutic, and aesthetic treatments, and as raw material for obtaining biomaterials, due to their stability and biological safety.

Resumo Pesquisas utilizando delineamento de misturas e modelos estatísticos têm sido realizadas nos últimos anos. Por meio desta metodologia foram otimizadas/descobertas aplicações em várias áreas tecnológicas, principalmete em tecnologia de argilas. A influência da carboximetilcelulose sobre as propriedades reológicas e de filtração das dispersões de bentonita para aplicação em fluidos de perfuração base água, utilizando a técnica de planejamento experimental e análise estatística para misturas de argilas, foi estudada neste trabalho. As dispersões foram preparadas de acordo com a norma da Petrobras EP-1EP-00011-A que trata do ensaio de viscosificantes para fluidos de perfuração base água para prospecção de petróleo. As misturas de argilas foram transformadas em sódicas e posteriormente aditivadas com carboximetilcelulose de massa molar alta e baixa, com a finalidade de melhorar sua reologia e volume de filtrado. Foi utilizado o planejamento experimental e análise estatística para verificar seu efeito. Os modelos de regressão foram efetuados, fazendo uma relação entre as composições e as propriedades reológicas: viscosidade aparente, viscosidade plástica e volume de filtração. A significância e a validade dos modelos foram confirmadas. Os resultados mostraram que as superfícies de respostas 3D das composições aditivadas com carboximetilcelulose de alta massa molecular foram as que mais contribuíram para aumentar a viscosidade aparente e viscosidade plástica, e que as de baixa massa molecular foram que as mais auxiliaram na redução do volume de filtrado. Outra observação relevante é que o planejamento experimental com análise estatística pode ser utilizado como ferramenta auxiliar importante para otimizar as propriedades reológicas e volume de filtrado de dispersões de argilas bentoníticas para uso em fluídos de perfuração quando aditivadas com carboximetilcelulose.

Abstract Over the past few years, considerable research has been conducted using the techniques of mixture delineation and statistical modeling. Through this methodology, applications in various technological fields have been found/optimized, especially in clay technology, leading to greater efficiency and reliability. This work studied the influence of carboxymethylcellulose on the rheological and filtration properties of bentonite dispersions to be applied in water-based drilling fluids using experimental planning and statistical analysis for clay mixtures. The dispersions were prepared according to Petrobras standard EP-1EP-00011-A, which deals with the testing of water-based drilling fluid viscosifiers for oil prospecting. The clay mixtures were transformed into sodic compounds, and carboxymethylcellulose additives of high and low molar mass were added, in order to improve their rheology and filtrate volume. Experimental planning and statistical analysis were used to verify the effect. The regression models were calculated for the relation between the compositions and the following rheological properties: apparent viscosity, plastic viscosity, and filtrate volume. The significance and validity of the models were confirmed. The results showed that the 3D response surfaces of the compositions with high molecular weight carboxymethylcellulose added were the ones that most contributed to the rise in apparent viscosity and plastic viscosity, and that those with low molecular weight were the ones that most helped in the reduction of the filtrate volume. Another important observation is that the experimental planning and statistical analysis can be used as an important auxiliary tool to optimize the rheological properties and filtrate volume of bentonite clay dispersions for use in drilling fluids when carboxymethylcellulose is added.