ABSTRACT Objective: This study aimed to compare the insertion torque (IT), flexural strength (FS) and surface alterations between stainless steel (SS-MIs) and titanium alloy (Ti-MIs) orthodontic mini-implants. Methods: Twenty-four MIs (2 x 10 mm; SS-MIs, n = 12; Ti-MIs, n = 12) were inserted on artificial bone blocks of 20 lb/ft3 (20 PCF) and 40 lb/ft3 (40 PCF) density. The maximum IT was recorded using a digital torque meter. FS was evaluated at 2, 3 and 4 mm-deflection. Surface topography and chemical composition of MIs were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). General linear and mixed models were used to assess the effect of the MI type, bone density and deflection on the evaluated outcomes. Results: The IT of Ti-MIs was 1.1 Ncm greater than that obtained for the SS-MIs (p= 0.018). The IT for MIs inserted in 40 PCF test blocks was 5.4 Ncm greater than that for those inserted in 20 PCF test blocks (p < 0.001). SS-MIs inserted in higher density bone (40 PCF) had significantly higher flexural strength than the other groups, at 2 mm (98.7 ± 5.1 Ncm), 3 mm (112.0 ± 3.9 Ncm) and 4 mm (120.0 ± 3.4 Ncm) of deflection (p< 0.001). SEM evidenced fractures in the Ti-MIs. EDS revealed incorporation of 18% of C and 2.06% of O in the loaded SS-MIs, and 3.91% of C in the loaded Ti-MIs. Conclusions: Based on the findings of this in vitro study, it seems that SS-MIs offer sufficient stability and exhibit greater mechanical strength, compared to Ti-MIs when inserted into higher density bone. Objective IT, , (IT) (FS SSMIs SS (SS-MIs TiMIs Ti (Ti-MIs miniimplants. miniimplants mini implants. implants mini-implants Methods Twentyfour Twenty four ( 1 SSMIs, MIs, 12 TiMIs, lbft3 lbft lb ft3 ft lb/ft (4 meter mmdeflection. mmdeflection deflection. mm-deflection (SEM Xray X ray EDS. . (EDS) type outcomes Results 11 1. p= p 0.018. 0018 0.018 0 018 0.018) 54 5 5. 0.001. 0001 0.001 001 0.001) groups 98.7 987 98 7 (98. 51 Ncm, 112.0 1120 112 (112. 39 9 3. 120.0 1200 120 (120. 34 p< TiMIs. MIs. 18 206 06 2.06 391 91 3.91 Conclusions (IT (EDS 0.01 01 000 0.00 00 98. (98 112. (112 120. (120 2.0 0.0 (9 (11 (12 2. 0. (1

RESUMO Objetivo: O objetivo deste estudo foi comparar o torque de inserção (TI), a resistência flexural (RF) e as alterações de superfície em mini-implantes ortodônticos de aço inoxidável (MIs-Ai) e de liga de titânio (MIs-Ti). Métodos: Vinte e quatro MIs (2 x 10 mm; MIs-Ai, n = 12; MIs-Ti, n = 12) foram inseridos em blocos de osso artificial de densidades de 20 lb/ft3 (20 PCF) e 40 lb/ft3 (40 PCF). O torque máximo de inserção foi registrado por meio de um torquímetro digital. A resistência flexural foi avaliada nas deflexões de 2, 3 e 4 mm. Topografia de superfície e composição química dos MIs foram avaliadas por Microscopia Eletrônica de Varredura (MEV) e Espectroscopia de Energia Dispersiva de Raios X (EDS). Modelos lineares gerais e mistos foram utilizados para avaliar o efeito do tipo de MI, da densidade óssea e da deflexão nos desfechos avaliados. Resultados: O TI dos MIs-Ti foi 1,1 Ncm maior do que o obtido para os MIs-Ai (P = 0,018). O TI para MIs inseridos em blocos de teste de 40 PCF foi 5,4 Ncm maior do que para aqueles inseridos em blocos de teste 20 PCF (p < 0,001). MIs-Ai inseridos em osso de maior densidade (40 PCF) apresentaram resistência flexural significativamente maior do que outros grupos, em deflexões de 2 mm (98,7 ± 5,1 Ncm), 3 mm (112,0 ± 3,9 Ncm) e 4 mm (120,0 ± 3,4 Ncm) (p < 0,001). A MEV evidenciou fraturas nos MIs-Ti. A EDS revelou incorporação de 18% de C e 2,06% de O nos MIs-Ai e 3,91% de C nos MIs-Ti, ambos submetidos a testes mecânicos. Conclusões: Com base nos resultados desse estudo in vitro, os MIs-Ai aparentam oferecer adequada estabilidade e maior resistência mecânica, em comparação aos MIs-Ti, quando inseridos em osso de maior densidade. Objetivo TI, , (TI) RF (RF miniimplantes mini implantes MIsAi Ai (MIs-Ai MIsTi. MIsTi Ti . (MIs-Ti) Métodos ( 1 MIsAi, Ai, 12 MIsTi, Ti, lbft3 lbft lb ft3 ft lb/ft (4 PCF. digital (MEV EDS. (EDS) MI avaliados Resultados 11 1, P 0,018. 0018 0,018 0 018 0,018) 54 5 5, p 0,001. 0001 0,001 001 0,001) grupos 98,7 987 98 7 (98, 51 Ncm, 112,0 1120 112 (112, 39 9 3, 120,0 1200 120 (120, 34 Ti. 18 206 06 2,06 391 91 3,91 mecânicos Conclusões vitro mecânica (TI (MIs-Ti (EDS 0,01 01 000 0,00 00 98, (98 112, (112 120, (120 2,0 0,0 (9 (11 (12 0, (1

Resumo Este estudo transversal teve como objetivo investigar a associação entre defeitos de desenvolvimento do esmalte (DDE) e polimorfismos de nucleotídeo único (SNPs) nos genes que codificam o receptor da vitamina D (VDR) e o hormônio da paratireoide (PTH). Pacientes ortodônticos em tratamento em uma escola Odontologia foram selecionados por amostragem de conveniência. Os DDEs foram avaliados e classificados por um examinador calibrado (Kappa>0,80) através de fotografias intraorais de acordo com os critérios propostos por Ghanim et al. (2015). Os tipos de DDE considerados para análise foram: hipoplasia de esmalte, hipomineralização molar-incisivo (HMI), hipomineralização de segundos molares decíduos (HSMD) e opacidades demarcadas não-HMI/HSMD. O DNA gnômico foi extraído de células bucais. Os SNPs em VDR (rs7975232) e PTH (rs694, rs6256 e rs307247) foram genotipados por PCR em tempo real. As análises estatísticas foram realizadas utilizando o software PLINK (versão 1.03, concebido por Shaun Purcell, EUA). Foram feitos teste de qui-quadrado e teste exato de Fisher com um nível de significância de 5%. Foram incluídos noventa e um (n=91) pacientes (49 do sexo feminino e 42 do sexo masculino) (idade média de 14,1±5,8 anos). A frequência de DDE foi de 38,5% (35 pacientes). As distribuições genotípicas estavam em equilíbrio de Hardy-Weinberg. Não foi encontrada associação estatisticamente significante entre os DDEs e os SNPs avaliados. Foi observada uma associação limítrofe (p=0,09) entre a DDE e o haplótipo CC para o SNP rs7975232 no VDR. Em conclusão, os SNPs seleccionados nos genes VDR e PTH não foram associados à DDE nas amostras estudadas. (DDE (SNPs (VDR PTH. . (PTH) conveniência Kappa>0,80 Kappa080 Kappa 0 80 (Kappa>0,80 al 2015. 2015 (2015) molarincisivo molar incisivo HMI, HMI , (HMI) HSMD (HSMD nãoHMI/HSMD. nãoHMIHSMD HMI/HSMD. não-HMI/HSMD bucais rs (rs7975232 rs694, rs694 (rs694 rs625 rs307247 real versão 103 1 03 1.03 Purcell EUA. EUA EUA) quiquadrado qui quadrado 5 5% n=91 n91 n 91 (n=91 49 (4 4 masculino idade 14158 14 8 14,1±5, anos. anos anos) 385 38 38,5 35 (3 pacientes. pacientes) HardyWeinberg. HardyWeinberg Hardy Weinberg. Weinberg Hardy-Weinberg p=0,09 p009 p 09 (p=0,09 rs797523 conclusão estudadas (PTH Kappa>0,8 Kappa08 (Kappa>0,8 201 (2015 (HMI nãoHMI nãoHMI/HSMD HMIHSMD HMI/HSMD (rs797523 rs69 (rs69 rs62 rs30724 10 1.0 n=9 n9 9 (n=9 ( 1415 14,1±5 3 38, p=0,0 p00 (p=0,0 rs79752 Kappa>0, Kappa0 (Kappa>0, 20 (201 (rs79752 rs6 (rs6 rs3072 1. n= (n= 141 14,1± p=0, p0 (p=0, rs7975 Kappa>0 (Kappa>0 2 (20 (rs7975 (rs rs307 (n 14,1 p=0 (p=0 rs797 Kappa> (Kappa> (2 (rs797 rs30 14, p= (p= rs79 (Kappa (rs79 rs3 (p rs7 (rs7

Abstract This cross-sectional study aimed to investigate the association between developmental defects of enamel (DDE) and single nucleotide polymorphisms (SNPs) in the genes encoding the vitamin D receptor (VDR) and parathyroid hormone (PTH). Orthodontic patients receiving treatment at a dental school were selected through convenience sampling. Intra-oral photographs were used to assess DDE, which were classified according to the criteria proposed by Ghanim et al. (2015) by a single calibrated examiner (Kappa>0.80). Enamel hypoplasia, molar-incisor hypomineralization (MIH), hypomimineralized second primary molar (HSPM), and non-MIH/HSPM demarcated opacities were considered for the analysis. Genomic DNA was extracted from buccal cells. The SNPs in VDR (rs7975232) and PHT (rs694, rs6256, and rs307247) were genotyped using real-time polymerase chain reactions (PCR). Statistical analyses were performed using the PLINK software (version 1.03, designed by Shaun Purcell, EUA). Chi-square or Fisher's exact tests were performed at a significance level of 5%. Ninety-one (n=91) patients (49 females and 42 males) (mean age of 14.1±5.8 years) were included. The frequency of DDE was 38.5% (35 patients). Genotype distributions were in Hardy-Weinberg equilibrium. No significant statistical association was found between DDE and the SNPs evaluated. A borderline association (p=0.09) was observed between DDE and the CC haplotype for SNP rs7975232 in VDR. In conclusion, the selected SNPs in VDR and PTH genes were not associated with DDE in the studied samples. crosssectional cross sectional (DDE (SNPs (VDR PTH. . (PTH) sampling Intraoral Intra oral al 2015 (2015 Kappa>0.80. Kappa080 Kappa Kappa>0.80 0 80 (Kappa>0.80) hypoplasia molarincisor incisor MIH, MIH , (MIH) HSPM, HSPM (HSPM) nonMIH/HSPM nonMIHHSPM non MIH/HSPM analysis cells rs (rs7975232 rs694, rs694 (rs694 rs6256 rs307247 realtime real time PCR. PCR (PCR) version 103 1 03 1.03 Purcell EUA. EUA EUA) Chisquare Chi square Fishers Fisher s 5 5% Ninetyone Ninety one n=91 n91 n 91 (n=91 49 (4 4 males mean 14158 14 8 14.1±5. years included 385 38 38.5 35 (3 patients. patients) HardyWeinberg Hardy Weinberg equilibrium evaluated p=0.09 p009 p 09 (p=0.09 rs797523 conclusion samples (PTH 201 (201 Kappa08 Kappa>0.8 (Kappa>0.80 (MIH (HSPM nonMIH MIHHSPM (rs797523 rs69 (rs69 rs625 rs30724 (PCR 10 1.0 n=9 n9 9 (n=9 ( 1415 14.1±5 3 38. p=0.0 p00 (p=0.0 rs79752 20 (20 Kappa0 Kappa>0. (Kappa>0.8 (rs79752 rs6 (rs6 rs62 rs3072 1. n= (n= 141 14.1± p=0. p0 (p=0. rs7975 2 (2 Kappa>0 (Kappa>0. (rs7975 (rs rs307 (n 14.1 p=0 (p=0 rs797 Kappa> (Kappa>0 (rs797 rs30 14. p= (p= rs79 (Kappa> (rs79 rs3 (p rs7 (Kappa (rs7

RESUMO Objetivo: Identificar as principais falhas de finalização ortodôntica registradas pelo Board Brasileiro de Ortodontia e Ortopedia Facial (BBO) e correlacionar a severidade inicial do caso com a qualidade da finalização ortodôntica. Material e Métodos: Esse estudo transversal unicêntrico coletou dados retrospectivos obtidos durante a Fase II dos exames do BBO, entre 2016 e 2023. A qualidade da finalização ortodôntica foi avaliada pelo Sistema Objetivo de Avaliação (SOA), e a severidade inicial do caso, pelo Índice do Grau de Complexidade (IGC), ambas ferramentas do American Board of Orthodontics. Os dados foram analisados por meio de estatística descritiva, e a análise de correlação entre os escores do SOA e IGC foi calculada (p < 0,05). Resultados: 447 casos ortodônticos foram incluídos. Falhas de finalização ortodôntica foram detectadas em todos os casos. Em média, 15 pontos foram descontados no escore final do SOA. As falhas mais comuns envolveram problemas de alinhamento, inclinação vestibulolingual, e nivelamento das cristas marginais. O escore médio do IGC foi de 22,0 (amplitude: 10,0 - 67,0). Não houve correlação significativa entre os escores de IGC e SOA (p = 0,106). Conclusão: As falhas de finalização ortodôntica são inevitáveis, mesmo em casos aprovados pelo BBO. Rotação, inclinação vestibulolingual excessiva e desníveis nas cristas marginais, nessa ordem, são as áreas que merecem mais atenção. Além disso, a severidade inicial do caso, determinada pelo IGC, não foi considerada um fator determinante na predição da qualidade final do tratamento, embora ela possa impactar o planejamento e representar desafios para os clínicos. BBO (BBO Métodos 201 2023 SOA, , (SOA) (IGC) Orthodontics descritiva p 0,05. 005 0,05 . 0 05 0,05) Resultados 44 incluídos média 1 alinhamento marginais 220 22 22, amplitude (amplitude 100 10 10, 67,0. 670 67,0 67 67,0) 0,106. 0106 0,106 106 0,106) Conclusão inevitáveis Rotação ordem atenção disso tratamento clínicos 20 202 (SOA (IGC 00 0,0 4 2 67, 6 010 0,10 0, 01 0,1

ABSTRACT Objective: To report and rank orthodontic finishing errors recorded in the clinical phase of the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) examination and correlate pretreatment case complexity with orthodontic treatment outcomes. Materials and Methods: This single-center cross-sectional survey collected retrospective data from the clinical phase of BBO examinations between 2016 and 2023. The quality of orthodontic clinical outcomes of each case was assessed by means of the Cast-Radiograph Evaluation (CRE), while case complexity was evaluated using the Discrepancy Index (DI), both tools provided by the American Board of Orthodontics. Survey items were analyzed using descriptive statistics, and a correlation analysis between total CRE and DI scores (p<0.05) was also performed. Results: A total of 447 orthodontic records was included. Orthodontic finishing errors were often observed, and no case was completely perfect. In the total CRE score, an average of 15 points was discounted for each case. Most frequently found issues involved problems with alignment, buccolingual inclination, marginal ridge, and occlusal relationship. The median DI score for initial case complexity was 22.0 (range 10.0 - 67.0). There was no significant correlation between the DI and CRE scores (p=0.106). Conclusion: Orthodontic finishing errors are inevitable, even in well-finished board-approved cases. Rotation, excessive buccolingual inclination, and discrepancies in marginal ridges are the most frequently observed areas of concern, in that order. Moreover, while case complexity, determined by DI, can impact orthodontic planning and pose challenges for clinicians, the study did not consider it a determining factor in predicting treatment outcomes. Objective (BBO Methods singlecenter single center crosssectional cross sectional 201 2023 CastRadiograph Cast Radiograph CRE, , (CRE) (DI) statistics p<0.05 p005 p 0 05 (p<0.05 performed Results 44 included perfect 1 alignment inclination ridge relationship 220 22 22. range 100 10 10. 67.0. 670 67.0 . 67 67.0) p=0.106. p0106 p=0.106 106 (p=0.106) Conclusion inevitable wellfinished well finished boardapproved board approved cases Rotation concern order Moreover clinicians 20 202 (CRE (DI p<0.0 p00 (p<0.0 4 2 67. 6 p010 p=0.10 (p=0.106 p<0. p0 (p<0. p01 p=0.1 (p=0.10 p<0 (p<0 p=0. (p=0.1 p< (p< p=0 (p=0. (p p= (p=0 (p=

Abstract Background Genetic polymorphisms have been shown to influence several physiological traits, including dental and craniofacial characteristics. Understanding the clinical relevance of genetic polymorphisms in dental practice is crucial to personalize treatment plans and improve treatment outcomes. Objective to evaluate the association between dental age and genetic polymorphisms in genes encoding estrogen receptors alpha and beta (ESR1 and ESR2, respectively) in a sample of Brazilian children. Methodology This retrospective cross-sectional study was performed with children undergoing orthodontic treatment. Patients with syndromes, congenital anomalies, craniofacial deformities, under hormonal or systemic treatment, and with a previous history of facial trauma were excluded. Panoramic radiographs were used to assess dental age according to the Demirjian, Goldstein, and Tanner method. A delta [dental age-chronological age (DA-CA)] was obtained, which shows whether the patient tends to have a normal, delayed (negative values), or advanced (positive values) dental age. DNA isolated from buccal cells was used to genotype four genetic polymorphisms: rs9340799 (A>G) and rs2234693 (C>T), located in ESR1; and rs1256049 (C>T) and rs4986938 (C>T), located in ESR2. A statistical analysis was performed and values of p<0.05 indicated statistical difference. Results A total of 79 patients were included, 44 (55.70%) girls and 35 (44.30%) boys. The Demirjian, Goldstein, and Tanner method, in general, overestimated patients’ age by 0.75 years. There was no difference in the delta of dental age between the sexes (p>0.05). Genetic polymorphisms in ESR1 and ESR2 were not associated with dental age (p>0.05). Conclusion The studied genetic polymorphisms in ESR1 and ESR2 were not associated with dental age in Brazilian children. traits characteristics outcomes ESR (ESR respectively crosssectional cross sectional syndromes anomalies deformities excluded Demirjian Goldstein method agechronological chronological DACA DA CA (DA-CA) obtained normal negative values, , positive rs rs934079 A>G AG G (A>G rs223469 C>T, CT C>T C T rs125604 (C>T rs498693 p005 p 0 05 p<0.0 7 included 4 55.70% 5570 55 70 (55.70% 3 44.30% 4430 30 (44.30% boys general 075 75 0.7 years p>0.05. p>0.05 . (p>0.05) (DA-CA rs93407 rs22346 rs12560 rs49869 p00 p<0. 55.70 557 5 (55.70 44.30 443 (44.30 07 0. p>0.0 (p>0.05 rs9340 rs2234 rs1256 rs4986 p0 p<0 55.7 (55.7 44.3 (44.3 p>0. (p>0.0 rs934 rs223 rs125 rs498 p< 55. (55. 44. (44. p>0 (p>0. rs93 rs22 rs12 rs49 (55 (44 p> (p>0 rs9 rs2 rs1 rs4 (5 (4 (p> ( (p

Resumo Considerando que a fumaça de cigarro é um problema de saúde pública que está crescendo entre os adolescentes, o objetivo deste estudo foi investigar o impacto da fumaça de cigarro na sinalização osteogênica e osteoclastogênica da sutura palatina mediana de ratos. Foram utilizados ratos Wistar machos expostos (n=30) e não expostos à fumaça de cigarro (n=30). A exposição à fumaça de cigarro foi realizada duas vezes ao dia por 3 minutos, com um intervalo de 12 horas entre as exposições. Os animais foram mortos após o período experimental de 3, 7, 14 e 21 dias. Os tecidos coletados foram analisados em microscópico de luz e pelo RT-PCR em tempo real foi realizado para investigar a expressão gênica. s dados obtidos foram comparados usando o testes de Kruskal Wallis e Dunn (⍺ = 5%). Morfoligicamente, não houve mudança significativa na sutura palatina mediana nos ratos expostos ou não à fumaça de cigarro durante os tempo de 3, 7, 14 e 21 dias (p> 0.05). Por outro lado, a sinalização osteogênica esta aumentada nos animais expostos à fumaça e foi caracterizado por um aumento da produção de RANKL aos 3 e 14 dias (p <0.05), sem mudança na síntese da produção de RANK e osteoprotegerina (p> 0.05). Curiosamente, nos animais expostos, também foi observado um aumento precoce da síntese de osteocalcina, sialoproteína óssea e de osteopontina aos 3 dias de exposição, o que não foi mantido ao longo do tempo. A fumaça de cigarro modula a sinalização osteogênica e osteoclastogênica na sutura palatina mediana de ratos jovens, apesar de não tenha sido evidenciado alterações morfológicas.

Abstract Considering that smoking is a public health problem that has been growing among adolescents, the aim of this study was to investigate the impact of cigarette smoke on osteogenic and osteoclastogenic signaling in middle palatal suture of rats. Male Wistar rats exposed (n = 30) or not to cigarette smoke (n = 30) were used. Exposure to smoke was carried out for two daily periods of 3 minutes each, with an interval of 12 hours between exposures. After the experimental periods of 3, 7, 14 and 21 days, the animals were euthanized. The collected tissues were analyzed using light microscopy and real-time RT-PCR was performed to investigate gene expression. The data obtained were compared using the Kruskal Wallis and Dunn tests (⍺ = 5%). Morphologically, there were no significant changes in the middle palatal suture of rats exposed or not to cigarette smoke during 3, 7, 14 and 21 days (p> 0.05). On the other hand, osteoclastogenic signaling was increased in animals exposed to smoke and was characterized by a higher production of RANKL at 3 and 14 days (p <0.05), with no change in the synthesis of RANK and osteoprotegerin (p> 0.05). Interestingly, in the exposed animals, an early increase in the synthesis of osteocalcin, bone sialoprotein and osteopontin was also identified at 3 days of exposure (p <0.05), not sustained over time (p> 0.05). Cigarette smoke modulates osteogenic and osteoclastogenic signaling in the middle palatal suture of young rats, although morphological changes have not been evidenced.

Resumo O objetivo do estudo foi avaliar a resistência de união ao cisalhamento da colagem (RCC), o índice de remanescente de adesivo (IRA) e o modo de fratura de bráquetes cerâmicos com retenção química e mecânica colados com diferentes compositos e irradiados com laser de CO2. A hipótese nula testada foi que bráquetes colados com diferentes compósitos e irradiados com laser de CO2 apresentam valores semelhantes de RCC. Noventa pré-molares humanos foram divididos em 6 grupos (n=15): 2 controles e 4 experimentais que se diferenciaram pelo tipo de bráquete ceramic (Fascination and Mystique) e pelo compósito de fixação (Transbond XT e Z 250). Nos quatro grupos experimentais, os bráquetes foram irradiados com laser de CO2 com 10W por 3 segundos anteriormente ao teste de RCC. O IRA das superficies de esmalte foram avaliados após a descolagem e submetidos a análise em microscopia electrônica de varredura (MEV). Para análise estatística foram utilizados ANOVA e o teste de mann-Whitney. Os grupos laser mostraram valores de RCC menores que os grupos não irradiados (controles) (p<0.05). Os bráquetes com retenção mecânica (Mystique) mostraram alta RCC (p<0.05) e o compósito Z 250 obteve os mais baixos valores de RCC após irradiação com laser. Os grupos colados com o compósito Z 250 apresentaram os mais altos escores do IRA. O modo de fratura mais prevalente foi a adesiva. A hipótese nula foi rejeitada. O laser de CO2 foi eficaz para diminuir os valores de RCC e facilitou a descolagem dos bráquetes cerâmicos de retenção química e mecânica

Abstract This study evaluated shear bond strength (SBS), adhesive remnant index (ARI) and fracture mode of chemically and mechanically retained ceramic brackets bonded with different composite resins and irradiated with CO2 laser. The null hypothesis was that ceramic brackets bonded with different composite resins and irradiated with CO2 laser would have similar SBS values. Ninety human premolars were divided into four experimental groups according to the combination of type of composite resin (Transbond XT and Z 250) and type of ceramic bracket (Fascination and Mystique), and two control groups (n=15). In the four experimental groups, the brackets were irradiated with CO2 laser at 10 W for 3 seconds before SBS testing. Enamel surface ARI was calculated after debonding under electron microscopy scanning. ANOVA and the Mann-Whitney test were used for statistical analysis. The laser groups had lower SBS values than the non-irradiated groups (control) (p<0.05). The mechanically retained brackets (Mystique) had the higher (p<0.05) and Z250 had the lower SBS values after CO2 laser irradiation. The groups bonded with Z250 had the highest ARI. Adhesive fractures were the most prevalent. The null hypothesis was rejected. CO2 laser decreased SBS efficiently and facilitated debonding of mechanically and chemically retained ceramic brackets.

RESUMO Os problemas transversais devem ser priorizados no tratamento ortodôntico e corrigidos assim que diagnosticados, para restituir a correta relação transversal entre maxila e mandíbula e, consequentemente, restabelecer o crescimento maxilar normal. A correção pode ser realizada em nível esquelético, por meio da abertura da sutura palatina mediana (SPM), ou por expansão dentoalveolar. A opção de tratamento depende de alguns fatores como idade, sexo, grau de hipoplasia da maxila e a maturação da SPM. Assim, o objetivo do presente trabalho foi discutir as diferentes abordagens terapêuticas para correção da hipoplasia maxilar em pacientes com maturação esquelética avançada.

ABSTRACT Transverse deficiencies should be a priority in orthodontic treatment, and should be corrected as soon as diagnosed, to restore the correct transverse relationship between maxilla and mandible and, consequently, normal maxillary growth. Corrections may be performed at the skeletal level, by opening the midpalatal suture, or by dentoalveolar expansion. The choice of a treatment alternative depends on certain factors, such as age, sex, degree of maxillary hypoplasia and maturation of the midpalatal suture. Thus, the present study discusses different treatment approaches to correct maxillary hypoplasia in patients with advanced skeletal maturation.

Abstract Objectives Enamel demineralization is among the main topics of interest in the orthodontic field. Self-ligating brackets have been regarded as advantageous in this aspect. The aim of this study was to evaluate the break homeostasis in the oral environment and the levels of microorganisms associated with dental caries among the different types of brackets. Material and Methods Twenty patients received two self-ligating brackets: In-Ovation®R, SmartClipTM, and one conventional GeminiTM. Saliva was collected before bonding (S0), 30 (S1) and 60 (S2) days after bonding. One sample of each bracket was removed at 30 and 60 days for the in situ analysis. Checkerboard DNA-DNA Hybridization was employed to evaluate the levels of microbial species as-sociated with dental caries. Data were evaluated by nonparametric Friedman and Wilcoxon tests at 5% significance level. Results The salivary levels of L. casei (p=0.033), S. sobrinus (p=0.011), and S. sanguinis (p=0.004) increased in S1. The in situ analyses showed alteration in S. mutans (p=0.047), whose highest levels were observed to the In-Ovation®R. Conclusions The orthodontic appliances break the salivary homeostasis of microorganisms involved in dental caries. The contamination pattern was different between self-ligating and conventional brackets. The In-Ovation®R presented worse performance considering the levels of cariogenic bacterial species.

Abstract Objectives: Miniscrew has been frequently used, considering that anchorage control is a critical point in orthodontic treatment, and its failure, the main adverse problem. Using two groups of stable (successful) and unstable (failed) mini-implants, this in vivo study aimed to quantify proinflammatory cytokines IL-1 α, IL-6, IL-17, and TNF-α and osteoclastogenesis marker RANK, RANKL, and OPG in gingival tissue, using the real-time polymerase chain reaction technique. Methodology: Thirteen patients of both sexes (11-49 years old) under orthodontic treatment were selected, obtaining 11 successful and 7 failed mini-implants. The mini-implants were placed and removed by the same surgeon, in both jaws. The mean time of permanence in the mouth was 29.4 months for successful and 7.6 months for failed mini-implants. At removal time, peri-mini-implant gingival tissue samples were collected and processed for quantification of the proinflammatory cytokines and osteoclastogenesis markers. Nonparametric Wilcoxon rank-sum test considering the clusters and Kruskal-Wallis test were used for statistical analysis (α=0.05). Results: No significant difference (p>0.05) was observed between the groups for either quantification of cytokines or osteoclastogenesis markers, except for IL-6 (p<0.05). Conclusions: It may be concluded that the expression of IL-1α, IL-17, TNF-α, RANK, RANKL, and OPG in peri-implant gingival tissue were not determinant for mini-implant stability loss, but the higher IL-6 expression could be associated with mini-implant failure.

Resumo Introdução A expansão rápida da maxila (RME) reduz o risco de desenvolvimento de distúrbios estruturais e funcionais no sistema estomatognático. Objetivo Analisar os efeitos desta intervenção como tratamento para a mordida cruzada posterior, relacionados à ocorrência de ruídos nas articulações temporomandibulares e à atividade eletromiográfica dos músculos masseter e temporal anterior. Material e método 13 meninas e 7 meninos, independentemente do tipo de maloclusão, com idade média de 9 anos (±3), foram tratadas com RME. Por meio de eletrovibratografia analisou-se ruídos nas articulações temporomandibulares, e de eletromiografia de superfície a atividade dos músculos mastigatórios antes (T0) e após 3 meses do final do tratamento proposto (T1). As comparações entre os lados afetado e não afetado pela mordida cruzada foram realizadas utilizando-se o teste de Mann-Withney. As comparações de antes e após o tratamento foram realizadas pelo teste de Wilcoxon (nível de significância: 5%). Resultado Não houve diferença significativa na eletrovibratografia entre os lados afetado e não afetado pela mordida cruzada, tanto em T0 como em T1 (p>0.05); do lado sem mordida cruzada observou-se diminuição do pico de amplitude dos ruídos articulares após a expansão rápida da maxila (p<0.05). Na análise da eletromiografia estática foram observadas diferenças inter-lados antes e após o tratamento, uma vez que a mastigação deliberada unilateral apresentou maior atividade de assimetria em T0 para ambos os lados, o que foi corrigido após o tratamento (p<0.05), melhorando a mastigação funcional padrão. Conclusão O tratamento proposto para mordida cruzada posterior funcional não levou à ocorrência de ruídos articulares e melhorou o padrão funcional da atividade eletromiográfica durante a mastigação ao final do tratamento.

Abstract Introduction The rapid maxillary expansion (RME) reduces the risk of developing structural and functional disorders in the stomatognathic system. Objective To examine the effects of the RME as a treatment for the posterior crossbite, related with the electromyographic activity of the masticatory muscles and the TMJ noises in a population of children. Material and method 13 girls and 7 boys, regardless of the type of malocclusion, with a mean age of 9 years old (± 3), were treated with RME. The electrovibratography analyzed the TMJ noise, and the electromyography analyzed the masticatory muscles before treatment (T0) and after three months of a short-term follow-up (T1). The comparisons of the affected and unaffected sides by the crossbite were performed using Mann-Whitney’s test, and to compare data before and after treatment the Wilcoxon’s test was used (level of significance: 5%). Result No significant differences were found in the parameters of joint noise in comparison to the sides affected and unaffected by the crossbite, in both T0 and T1 (p>0.05); only the side without the crossbite observed decrease in the peak amplitude of the joint noises after treatment. In the static electromyographic analysis, inter-side differences were observed before and after treatment, since the deliberate unilateral chewing showed greater asymmetry activity in T0 for both sides, which has been corrected after treatment, improving the functional chewing. Conclusion The proposed treatment did not lead to the occurrence of joint noises and improved the functional pattern of electromyographic activity during chewing at the end of treatment.

RESUMO A transposição é considerada uma das anomalias dentárias mais difíceis de se administrar clinicamente. Vários fatores devem ser considerados para que a melhor decisão seja tomada. Neste artigo, o objetivo foi discutir as modalidades de tratamento da transposição dentária, suas vantagens e desvantagens, e apresentar um caso clínico de transposição entre canino e incisivo lateral na hemiarcada superior direita. A opção terapêutica de escolha foi a extração de um dos dentes transpostos, tendo-se a necessidade de uma abordagem multidisciplinar com a participação da Ortodontia, Dentística e Periodontia, a fim de que adequados resultados estéticos e funcionais fossem alcançados.

ABSTRACT Tooth transposition is one of the most difficult dental anomalies to treat in the dental clinic. Several factors must be taken into account with a view of making the best decision. The aim of this study was to discuss treatment modalities for tooth transposition, their advantages and disadvantages. Additionally, it aims at presenting a clinical case of transposition between canine and lateral incisor in the upper quadrant on the right side. The treatment of choice was extraction of one transposed tooth. A multidisciplinary approach involving Orthodontics, Cosmetic Dentistry, and Periodontology was necessary to allow proper esthetic and functional outcomes to be achieved.

Abstract Objectives Using two groups of mini-implants (successful and failed) the objectives of this in vivo study were: to evaluate the microbial contamination by the checkerboard DNA-DNA hybridization technique and to quantify the bacterial endotoxin by the limulus amebocyte lysate assay. Material and Methods The 15 successful and 10 failed mini-implants (1.6 mm diameter × 7.0 or 9.0 mm long), placed in the maxilla and/or mandible, were obtained from 15 patients undergoing orthodontic treatment. Data were analyzed statistically by the Wilcoxon rank-sum test using the SAS software (a=0.05). Results All 40 microbial species were detected in both groups of mini-implants, with different frequencies. No differences were observed between the groups with respect to microbial complexes (blue, purple, yellow, green, orange, red and other species) and endotoxin quantification (p>0.05). Conclusion Neither microbial contamination nor endotoxin quantification was determinant for the early loss of stability of the mini-implants.

Resumo Este estudo teve como objetivo testar a hipótese de que os níveis de contaminação de Streptococcus mutans diferem de acordo com o tipo de ligadura ortodôntica. Treze pacientes foram selecionados. Cada quadrante foi submetido aleatoriamente a um dos seguintes protocolos de uso de ligadura: I) ligadura elastomérica, II) ligadura de aço trançada sobre o arco, III) ligadura de aço trançada sob o arco e IV) ligadura de aço em um padrão de “oito” sob o arco. Após sete dias, os dispositivos foram removidos e a contagem das unidades formadoras de colônia de S. mutans por mg de peso de biofilme foi determinada. Doze espécimes (n = 3) também foram processados para análise por microscopia eletrônica de varredura. Análise de variância e teste de Tukey-Kramer foram utilizados para comparações a fim de avaliar as diferenças de níveis de S. mutans entre os grupos com significância de 5%. Não houve diferença estatisticamente significante em níveis detectáveis de S. mutans entre os grupos (p = 0,294). Os resultados da microscopia eletrônica de varredura mostraram biofilmes abundantes e contaminação microbiana em todos os grupos. Em conclusão, os níveis de contaminação de S. mutans são semelhantes nas diferentes ligaduras ortodônticas.

Abstract This study aimed to test the hypothesis that Streptococcus mutans contamination levels differ according to the type of the orthodontic ligature. Thirteen patients were selected. Each quadrant was randomly subjected to one of the following ligature-use protocols: I) elastomeric chain, II) steel ligature crossed over the archwire, III) steel ligature crossed under the archwire, and IV) steel ligature in a figure-eight pattern under the archwire. After seven days, the devices were removed and the Streptococcus mutans colony-forming unit count per mg of biofilm weight was determined. Twelve specimens (n=3) were also processed for scanning electron microscopy analysis. ANOVA and Tukey-Kramer test were used for comparisons to assess S. mutans differences between groups at a 5% significance level. There was no statistical difference in detectable levels of S. mutans among the groups (p=0.294). Scanning electron microscopy results showed abundant biofilms and microbial contamination in all groups. In conclusion, S. mutans contamination levels are similar in the different orthodontic ligatures.

Abstract Decalcification of enamel during fixed orthodontic appliance treatment remains a problem. White spot lesions are observed in nearly 50% of patients undergoing orthodontic treatment. The use of fluoride-containing orthodontic materials has shown inconclusive results on their ability to reduce decalcification. The aims of this investigation were to compare the levels of Streptococcus mutans (SM) in saliva and biofilm adjacent to orthodontic brackets retained with a resin-modified glass ionomer cement (RMGIC) (Fuji ORTHO LC) and a light cured composite resin (Transbond XT), and to analyze the influence of topical application of the 1.23% acidulated phosphate fluoride (APF) on SM counts. In a parallel study design, two groups (n=14/15) were used with random allocation and high salivary SM counts before treatment. Biofilm was collected from areas adjacent to the brackets on teeth 13, 22, 33, and 41. Both saliva and biofilm were collected on the 7th, 21st, 35th, and 49th days after appliance placement. Topical fluoride application was carried out on the 35th day. Bonding with RMGIC did not alter SM counts in saliva or biofilm adjacent to the brackets. On the other hand, the biofilm adjacent to brackets retained with composite resin showed a significant increase in SM counts along the trial period. Topical application of 1.23% APF did not reduce salivary or biofilm SM counts regardless of the bonding material. In conclusion, fluoride topical application did not show efficacy in reducing SM. The use of RMGIC as bonding materials allowed a better control of SM cfu counts in dental biofilm hindering the significant increase of these microorganisms along the trial period, which was observed in the biofilm adjacent to the composite material.

Este estudo avaliou a eficácia do laser de CO2, associado ou não à aplicação de flúor na microdureza superficial do esmalte dentário adjacente a bráquetes ortodônticos. Foram selecionados 15 molares humanos, dos quais 30 fragmentos de esmalte com 4 mm2 foram obtidos. Os fragmentos foram incluídos em tubos de PVC, contendo resina acrílica, preparados usando lixas d'água e discos de feltro e alumina. Bráquetes ortodônticos cortados ao meio foram colados no esmalte e 3 leituras de microdureza foram realizadas na superfície adjacente: inicial, após desafio cariogênico e final. Os espécimes foram divididos em 3 grupos (n=10): Grupo C - Controle, Grupo L - irradiado com laser de CO2 e Grupo FL - aplicação tópica de flúor e irradiação com laser de CO2. Após leitura inicial, os espécimes foram colocados em solução desmineralizadora por 32 h e a segunda leitura foi realizada para verificar se desmineralização foi uniforme em todos os grupos. Após os tratamentos, os espécimes foram submetidos a ciclagem DES-RE durante 8 dias seguida da leitura da microdureza superficial final. Os dados foram analisdos estatisticamente utilizando ANOVA e o teste de Duncan (α=0,05). Na mensuração final o grupo FL obteve maior valor de microdureza que os grupos C e L (p<0,05). Os grupos L e FL foram estatisticamente superiores ao grupo C (p<0,05). A irradiação de laser de CO2 ao redor de bráquetes ortodônticos combinadas ou não à aplicação tópica de flúor foi eficaz no aumento da microdureza superficial do esmalte.

This study evaluated the effectiveness of carbon dioxide (CO2) laser combined or not with fluoride application on the surface microhardness of enamel adjacent to orthodontic brackets. Fifteen human molars were selected from which 30 enamel fragments measuring 4 mm2 were obtained. The fragments were embedded in PCV tubes with acrylic resin and prepared using water abrasive paper, felt disks and alumina. Orthodontic brackets cut in half were bonded to enamel and 3 microhardness readings were performed on the adjacent surface, as follows: initial, after cariogenic challenge and final. The specimens were divided into the following 3 groups (n=10): Group C: control, Group L: irradiated with CO2 laser, and Group FL: topical fluoride application and CO2 laser irradiation. After initial reading, the specimens were placed in a demineralizing solution for 32 h and the second reading was to verify if demineralization was uniform in all groups. After the treatments, the specimens were submitted to DES-RE cycling for 8 days followed by final surface microhardness reading. The data were analyzed statistically using ANOVA and Duncan test (α=0.05). At the final measurement Group FL obtained higher microhardness value than Groups C and L (p<0.05). Groups L and FL were statistically superior to Group C (p<0.05). Irradiation with CO2 laser around orthodontic brackets combined or not with topical fluoride application was effective to increase the surface microhardness of enamel.