Layered double hydroxides (LDHs) and related materials have been studied for a long time and their application in catalytic processes remain attractive due to the tuned properties, morphologies and metal-support interactions obtained from a variety of composition and synthesis route. In this mini-review, some important reactions, such as photocatalysis, electrocatalysis, reduction, carbon-carbon cross-couplings and water-gas shift will be emphasized along with the role of LDHs as catalysts, co-catalysts or catalytic precursors when it was clearly indicated. (LDHs properties metalsupport metal support route minireview, minireview mini review, review mini-review reactions photocatalysis electrocatalysis reduction carboncarbon carbon crosscouplings cross couplings watergas water gas catalysts cocatalysts co indicated

In this paper the current status of fuel cells is described with particular emphasis on high (T > 800 ºC) and intermediate (T < 800 ºC) temperature solid oxide fuel cells. Also the importance of the fuel cell technology is shown. Reviewed are the fundamental features, the basic principles, types of fuel cell, fabrication methods, cell configurations and the development of components (cathodes, anodes, electrolytes, interconnect) and materials.

This work is concerned with thermodynamic analysis of the stability of some ceria electrolytes under contact with hydrogen gas nearby anode in fuel cells. It was considered the following types of ceria-electrolytes: pure ceria, strontium-doped ceria, calcium-doped ceria and calcium-bismuth-doped ceria. The equilibrium Log (pH2O/pH2) vs. T diagrams were constructed for x = 0.1 and 0.01, where x is the fraction of initial ceria converted to Ce2O3 (proportional to the ratio between activities of Ce3+ and Ce4+ in the ceria electrolyte, which is proportional to the fraction of electronic conduction in the electrolyte at a given temperature). The predictions of the diagrams are as follows: (a) Ce1.9Ca0.1Bi0.8O5.1 and Ce0.9Sr0.1O1.9 are less stable than pure ceria for the whole temperature range (from 0 to 1000 °C); (b) Ce0.9Ca0.1O1.9 is more stable than pure ceria below about 650 °C for x = 0.1 and below about 400 °C for x = 0.01; (c) at each temperature in the considered range the pressure ratio pH2O(g)/pH2(g) has to be higher than thermodynamically predicted in order to keep CeO2 stable in the electrolyte contacting hydrogen gas. Thermodynamic predictions are entirely capable of explaining experimental data published on the subject (irreversible cell degradation in the case of SrO-doped ceria; weight loss from doped-ceria electrolyte above 700 °C; oxygen gas release during sintering of ceria).