Abstract This study aimed to develop and validate a self-administered questionnaire in Brazilian Portuguese to verify the level of knowledge of orthodontists in the care of pregnant, lactating, and postmenopausal women, named “Considerations on Orthodontic Treatment during Pregnancy, Lactation, and Postmenopausal Periods.” The development and validation of the questionnaire consisted of the following steps: a) item generation; b) item reduction; c) questionnaire design; and d) validity and reliability tests in a cross-sectional study with 258 orthodontists working in the field from different Brazilian states. A total of 60 orthodontists participated in test-retest over a mean period of 45 days. The preliminary questionnaire consisted of a total of 60 questions. After item reduction, 40 questions were selected for the final version of the questionnaire, with eight questions about pregnant women; six about lactating women; 18 about postmenopausal women, and eight about general knowledge in dentistry. Each item had three response options in the Likert scale format. Face and content validity analysis, reliability assessment through internal consistency (Cronbach’s alpha and McDonald’s omega), and test-retest reliability through the intraclass correlation coefficient (ICC) and Spearman’s correlation coefficient were performed. Face and content validity indicated that the questionnaire was considered valid, objective, and easily understandable. The questionnaire had good internal consistency (Cronbach’s alpha = 0.77; McDonald’s omega = 0.78) and good test-retest reliability (ICC = 0.71; Spearman’s correlation coefficient = 0.51). The questionnaire was considered valid and reliable to assess the level of knowledge of orthodontists in the care of pregnant, lactating, and postmenopausal women. selfadministered self administered women Considerations Pregnancy Lactation Periods. Periods steps generation b reduction c design d crosssectional cross sectional 25 states 6 testretest test retest 4 days 1 dentistry format analysis Cronbachs Cronbach s McDonalds McDonald omega, , omega) ICC Spearmans Spearman performed objective understandable 0.77 077 0 77 0.78 078 78 0.71 071 71 0.51. 051 0.51 . 51 0.51) 2 0.7 07 7 05 0.5 5 0.

Abstract Studies investigating the effects of different modalities of exercises on the immune system are scarce. Therefore, the aim of this study was to compare the effects of eight weeks of resistance and aerobic training on the proliferation of T and B lymphocytes from mice. Eighteen male C56BL6/J mice were divided into groups (n=6), sedentary, aerobic, and resistance training. After 8 weeks, animals were euthanized, and their splenocytes were labeled and cultured with and without stimulation. Lymphocyte proliferation (CD4+, CD8+ and CD21/CD35+) was evaluated by flow cytometry. The mice subjected to resistance exercise exhibited greater proliferation for total, CD8+ and B lymphocytes (p<0.05), but not CD4+ cells (p>0.05), compared with their sedentary counterparts. We found significant correlations between maximum load and total, CD8+ and B lymphocytes proliferation rates (p<0.05). In conclusion, our results showed that resistance training promoted an improvement in the immune response associated with CD8+ and B lymphocytes. scarce Therefore C56BL6J CBLJ C56BL6 J C BL n=6, n6 n n=6 , 6 (n=6) euthanized stimulation CD4+, CD4 CD (CD4+ CD8 CD21/CD35+ CD21CD35 CDCD CD21 CD35 cytometry total p<0.05, p005 p p<0.05 0 05 (p<0.05) p>0.05, p>0.05 (p>0.05) counterparts p<0.05. . conclusion CBL C56BL n= (n=6 (CD4 CD21/CD35 CD21CD3 CD2 CD3 p00 p<0.0 (p<0.05 p>0.0 (p>0.05 (n= (CD CD21/CD3 CD21CD p0 p<0. (p<0.0 p>0. (p>0.0 (n CD21/CD p<0 (p<0. p>0 (p>0. p< (p<0 p> (p>0 (p< (p> (p

Abstract: Cleft lip and palate (CLP) represent the most frequently reported congenital anomaly affecting the craniofacial region. The aim of this study was to assess the output (in number of procedures) of the Brazilian hospitals accredited for the treatment of CLP patients, examine the referral flow of patients requiring this type of care, and ascertain the adequacy of the corresponding infrastructure of these healthcare facilities. Methodologically, the study used an observational, cross-sectional, and ecological design. Output data, categorized by state and macro-region, and patient referral flow records were accessible through the Outpatient Information System (SIA, in its Portuguese acronym) and the Hospital Information System (SIH, in Portuguese), respectively. Infrastructure assessment relied on data sourced from the National Register of Health Establishments (CNES, in Portuguese). Analysis encompassed data from 28 accredited hospitals. Concerning output metrics, the state of São Paulo ranked first in the number of procedures conducted. The establishments exhibiting the lowest output performance comprised six hospitals located in the Southeast region and two in the Center-West region. Examination of patient referral flow corroborated the concentration of procedures predominantly conducted in the Southeast, notably within São Paulo state. Infrastructure evaluation encompassed the following categories: physical facilities, diagnostic and therapeutic support services, equipment, and comprehensive multidisciplinary care services. The data showed that roughly 61% of the hospitals surveyed possessed less than half of the recommended items. The primary deficiency identified pertained to inadequacies in equipment availability. Conversely, the best outcomes were associated with diagnostic and therapeutic support services. It was concluded that enhancing hospital infrastructure is imperative for the amelioration of care provision to patients with CLP across all Brazilian states. Abstract (CLP facilities Methodologically observational crosssectional, crosssectional cross sectional, sectional cross-sectional design macroregion, macroregion macro region, macro-region SIA, SIA (SIA acronym SIH, SIH (SIH Portuguese, , Portuguese) respectively CNES, CNES (CNES Portuguese. . 2 metrics CenterWest Center West categories services 61 items availability Conversely states 6

RESUMO Introdução: A sobreposição de modelos 3D é uma necessidade iminente. No entanto, os métodos atuais dependem da marcação de múltiplos pontos na maxila e na mandíbula, o que pode aumentar a incorporação de erros no processo de sobreposição. Objetivo: O objetivo desse estudo foi desenvolver um método para sobrepor modelos 3D das arcadas superior e inferior utilizando o software de engenharia Autodesk Inventor®, por meio da marcação de um único ponto em cada arcada, usando o sistema de coordenadas universal (UCS). Métodos: No total, 104 modelos STL das arcadas superior e inferior exportados da plataforma My iTero® foram selecionados retrospectivamente, onde T0 foi o período inicial e T1, o de refinamento (n=26 por grupo). As coordenadas X, Y e Z associadas a um único ponto em cada arcada foram inseridas nos modelos usando o software SlicerCMF®. Os modelos com os pontos UCS demarcados foram transferidos para o software Autodesk Inventor® para realizar a sobreposição e medir os movimentos dentários realizados durante o tratamento com Invisalign®. Os movimentos de expansão, intrusão e rotação foram analisados por dois examinadores. A análise estatística foi realizada usando os coeficientes de correlação intra-classe (ICC), fórmula de Dahlberg e teste t (p<0,05). Resultados: Foi desenvolvido um método confiável de sobreposição de modelos digitais 3D usando um único ponto UCS na maxila e mandíbula. O ICC apresentou excelente correlação intra e inter-avaliadores (ICC>0,90). Não foi encontrado erro sistemático nas medidas lineares e angulares (<1mm e <1,5°, respectivamente). Os movimentos dentários puderam ser analisados por meio do método proposto, incluindo expansão da arcada, intrusão e rotação dentária. Conclusão: O método desenvolvido provou ser confiável e reprodutível para sobreposição de modelos 3D das arcadas superior e inferior usando o sistema UCS com marcação de ponto único. Introdução D iminente entanto mandíbula Objetivo Inventor UCS. . (UCS) Métodos total 10 iTero retrospectivamente T T1 n=26 n26 n 26 (n=2 grupo. grupo grupo) X SlicerCMF SlicerCMF® Invisalign Invisalign® examinadores intraclasse classe ICC, , (ICC) p<0,05. p005 p p<0,05 0 05 (p<0,05) Resultados interavaliadores inter avaliadores ICC>0,90. ICC090 ICC>0,90 90 (ICC>0,90) <1mm 1mm mm 15 1 5 <1,5° respectivamente. respectivamente respectivamente) proposto dentária Conclusão (UCS n=2 n2 2 (n= (ICC p00 p<0,0 (p<0,05 ICC09 ICC>0,9 9 (ICC>0,90 <1,5 n= (n p0 p<0, (p<0,0 ICC0 ICC>0, (ICC>0,9 <1, p<0 (p<0, ICC>0 (ICC>0, <1 p< (p<0 ICC> (ICC>0 < (p< (ICC> (p

ABSTRACT Introduction: Superposing 3D models is an imminent need. However, current methods rely on marking multiple points on the maxilla and mandible, which could increase point marking and overlapping errors. Objective: This study aimed at developing a method for superimposing 3D models of the maxillary and mandibular arches with Autodesk Inventor® engineering software, using a single universal coordinate system (UCS) point superposition. Methods: A total of 104 STL (stereolithography) models of the maxillary and mandibular arches exported from My iTero® platform were retrospectively selected, in which T0 and T1 were the initial and refinement periods, respectively (n=26 per group). The X, Y, and Z coordinates associated with a single point in each arch were inserted into the models with SlicerCMF® software for model orientation. The arch models with UCS registration were transferred to Autodesk Inventor® for superimposition and to measure tooth movements performed during Invisalign® treatment. Arch expansion, intrusion and rotation were analyzed by two examiners. The statistics were performed using intraclass correlation coefficients (ICC), Dahlberg’s formula, and t-test (p<0.05). Results: A reliable method of superimposing 3D digital models using a single UCS point in the maxilla and mandible was developed. ICC showed excellent intra- and inter-examiner correlation (ICC>0.90). A systematic error was not found concerning linear and angular measurements (<1mm and <1.5°, respectively). Digital dental movements could be analyzed, including arch expansion, dental intrusion, and tooth rotation. Conclusions: The developed method was proven reliable and reproducible for superimposing 3D models of the maxillary and mandibular arches by using UCS system. Introduction D need However errors Objective Inventor (UCS superposition Methods 10 stereolithography (stereolithography iTero selected T periods n=26 n26 n 26 (n=2 group. group . group) X Y SlicerCMF orientation Invisalign treatment expansion examiners ICC, , (ICC) Dahlbergs Dahlberg s formula ttest t test p<0.05. p005 p p<0.05 0 05 (p<0.05) Results intra interexaminer inter examiner ICC>0.90. ICC090 ICC>0.90 90 (ICC>0.90) <1mm 1mm mm 15 1 5 <1.5° respectively. respectively) Conclusions n=2 n2 2 (n= (ICC p00 p<0.0 (p<0.05 ICC09 ICC>0.9 9 (ICC>0.90 <1.5 n= (n p0 p<0. (p<0.0 ICC0 ICC>0. (ICC>0.9 <1. p<0 (p<0. ICC>0 (ICC>0. <1 p< (p<0 ICC> (ICC>0 < (p< (ICC> (p

RESUMO Introdução: Os bifosfonatos têm um impacto inibitório na atividade osteoclástica, reduzindo a reabsorção óssea. No entanto, a influência do risedronato no movimento dentário não está bem definida. Objetivo: Esta revisão sistemática avaliou o efeito do uso de risedronato no movimento ortodôntico dos dentes. Um relato de caso também é apresentado. Métodos: Dois revisores independentes pesquisaram seis bases de dados (PubMed, Web of Science, Ovid, Lilacs, Scopus e Open Grey), considerando o período de abril de 2020 até junho de 2023, sem restrições de data e/ou idioma de publicação. A questão clínica focou em avaliar o movimento ortodôntico dos dentes e movimento de recidiva (resultado) em animais (população) expostos ao risedronato (exposição) em comparação com grupos de controle (comparação). Foram aplicadas as Diretrizes Preferenciais para Revisão Sistemática e Metanálise (PRISMA) e um protocolo foi registrado no PROSPERO (CRD42020168581). O risco de viés foi determinado utilizando o protocolo do Centro de Revisão Sistemática para Experimentação em Animais de Laboratório (SYRCLE). Resultados: Dois estudos em ratos e um em porquinhos-da-índia foram incluídos na revisão sistemática. Os estudos relataram uma diminuição no movimento ortodôntico dos dentes, uma redução no movimento de recidiva e um número reduzido de células positivas à fosfatase ácida tartarato-resistente (TRAP) com um número significativamente reduzido de falhas ósseas após a administração de risedronato em ratos. Um relato de caso ilustrou os efeitos da administração de risedronato em uma paciente. Conclusão: Com base na revisão sistemática, o risedronato parece interferir no movimento ortodôntico dos dentes e na recidiva devido a uma diminuição nas células de reabsorção óssea. Introdução osteoclástica óssea entanto definida Objetivo apresentado Métodos PubMed, PubMed (PubMed Science Ovid Lilacs Grey, Grey , Grey) 202 2023 eou ou publicação resultado (resultado população (população exposição (exposição comparação. . (comparação) PRISMA (PRISMA CRD42020168581. CRD42020168581 CRD (CRD42020168581) SYRCLE. SYRCLE (SYRCLE) Resultados porquinhosdaíndia porquinhos índia tartaratoresistente tartarato resistente TRAP (TRAP paciente Conclusão 20 (comparação CRD4202016858 (CRD42020168581 (SYRCLE 2 CRD420201685 (CRD4202016858 CRD42020168 (CRD420201685 CRD4202016 (CRD42020168 CRD420201 (CRD4202016 CRD42020 (CRD420201 CRD4202 (CRD42020 CRD420 (CRD4202 CRD42 (CRD420 CRD4 (CRD42 (CRD4 (CRD

ABSTRACT Introduction: Bisphosphonates have an inhibitory impact on osteoclastic activity, reducing bone resorption. However, the influence of risedronate on tooth movement is not well-defined. Objective: This systematic review assessed the effect of risedronate intake on orthodontic tooth movement. A case report was also provided. Methods: Two independent reviewers searched six databases (PubMed, Web of Science, Ovid, Lilacs, Scopus, and Open Grey). The searches were carried out in April/2020, and an update was set in place in June/2023. Therefore, the searches considered a timeline from the databases’ inception date until June/2023, with no publication date and/or language restrictions. The clinical question focused on evaluating the orthodontic tooth movement and relapse movement (Outcome) in animals (Population) exposed to risedronate (Exposure), compared to control groups (Comparison). The Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) guidelines were applied, and the protocol was registered in PROSPERO (CRD42020168581). The risk of bias was determined using the Systematic Review Centre for Laboratory Animal Experimentation protocol (SYRCLE). Results: Two studies in rats and one in guinea pigs were included in the systematic review. The studies reported a decrease in orthodontic tooth movement, a reduction in the relapse movement, and a reduced number of positive tartrate-resistant acid phosphatase (TRAP) cells, with a significantly reduced number of bone gaps after the administration of risedronate in rats. A case report illustrated the effects of risedronate administration in one patient. Conclusion: Based on the systematic review, risedronate seems to impair orthodontic tooth movement and relapse due to a decrease in bone resorption cells. Introduction activity However welldefined. welldefined well defined. defined well-defined Objective provided Methods PubMed, PubMed (PubMed Science Ovid Lilacs Scopus Grey. Grey . Grey) April2020 April 2020 April/2020 June2023 June 2023 June/2023 Therefore andor or restrictions Outcome (Outcome Population (Population Exposure, Exposure , (Exposure) Comparison. Comparison (Comparison) MetaAnalysis Meta Analysis PRISMA (PRISMA applied CRD42020168581. CRD42020168581 CRD (CRD42020168581) SYRCLE. SYRCLE (SYRCLE) Results tartrateresistant tartrate resistant TRAP (TRAP cells patient Conclusion April202 202 April/202 June202 June/202 (Exposure (Comparison CRD4202016858 (CRD42020168581 (SYRCLE April20 20 April/20 June20 June/20 CRD420201685 (CRD4202016858 April2 2 April/2 June2 June/2 CRD42020168 (CRD420201685 April/ June/ CRD4202016 (CRD42020168 CRD420201 (CRD4202016 CRD42020 (CRD420201 CRD4202 (CRD42020 CRD420 (CRD4202 CRD42 (CRD420 CRD4 (CRD42 (CRD4 (CRD

Abstract To evaluate the release of bisphenol-A glycidyl methacrylate (BisGMA), triethylene glycol dimethacrylate (TEGDMA), bisphenol A (BPA), and phthalates of the composite resin used in the bonding of spurs applied in the treatment of children with anterior open bite and its effects on human keratinocytes. Methodology Saliva samples of 22 children were collected before spur attachment (baseline) and 30 minutes (min) and 24 hours (h) after spur bonding. Analysis was performed using high-performance liquid chromatography (HPLC) coupled to tandem mass spectrometry (HPLC–MS/MS) and gas chromatography coupled to mass spectrometry (GC–MS). Standardized resin increments were added to three different dilutions of the cell culture medium. Keratinocytes (HaCaT) were cultivated in the conditioned media and evaluated for cell viability (MTT) and cell scratch assay. Results The levels of BisGMA (1.74±0.27 μg/mL), TEGDMA (2.29±0.36 μg/mL), and BPA (3.264±0.88 μg/L) in the saliva after 30 min, in comparison to baseline (0±0 μg/mL, 0±0 μg/mL, and 1.15±0.21 μg/L, respectively), presented higher numbers. After 24 h, the levels of the monomers were similar to the baseline. Phthalates showed no significant difference among groups. HaCat cells showed increased viability and reduced cell migration over time after exposure to methacrylate-based resin composites. Conclusion Resin composites, used to attach spurs in children with anterior open bite during orthodontic treatment, release monomers after polymerization and can influence the behavior of human keratinocytes, even at very low concentrations. Orthodontists should be aware of the risks of the resinous compounds release and preventive procedures should be held to reduce patient exposure. bisphenolA BisGMA, , (BisGMA) TEGDMA, (TEGDMA) BPA, (BPA) keratinocytes 2 (baseline 3 min (min h (h highperformance high performance HPLC (HPLC HPLC–MS/MS HPLCMSMS MS (HPLC–MS/MS GC–MS. GCMS GC–MS . GC (GC–MS) medium HaCaT (HaCaT MTT (MTT assay 1.74±0.27 174027 1 74 0 27 (1.74±0.2 μgmL μg/mL μg mL μg/mL) 2.29±0.36 229036 29 36 (2.29±0.3 3.264±0.88 3264088 264 88 (3.264±0.8 μg/L μgL L 00 (0± 0± 115021 15 21 1.15±0.2 respectively, respectively respectively) numbers groups methacrylatebased based composites concentrations (BisGMA (TEGDMA (BPA (GC–MS 1.74±0.2 17402 7 (1.74±0. 2.29±0.3 22903 (2.29±0. 3.264±0.8 326408 26 8 (3.264±0. (0 11502 1.15±0. 1.74±0. 1740 (1.74±0 2.29±0. 2290 (2.29±0 3.264±0. 32640 (3.264±0 ( 1150 1.15±0 1.74±0 174 (1.74± 2.29±0 229 (2.29± 3.264±0 3264 (3.264± 115 1.15± 1.74± 17 (1.74 2.29± (2.29 3.264± 326 (3.264 11 1.15 1.74 (1.7 2.29 (2.2 3.264 32 (3.26 1.1 1.7 (1. 2.2 (2. 3.26 (3.2 1. (1 2. (2 3.2 (3. 3. (3

Abstract We evaluated the accuracy of radiomorphometric indices (RI) and fractal dimension (FD) for screening bone mineral density (BMD) in postmenopausal patients who had breast cancer and were using aromatase inhibitors (AI). The sample consisted of 40 participants. Digital panoramic radiography (DPR) and cone beam computed tomography (CBCT) were evaluated along with dual-energy X-ray absorptiometry (DXA), which is the gold standard for detecting low BMD. According to the T-scores of DXA, the subjects were assigned into two groups: with normal BMD and with low BMD (osteopenia and osteoporosis). The area under the curve (AUC), sensitivity, and specificity with their respective confidence intervals were determined for DPR and CBCT. For DPR indices, AUC ranged from 52.6 to 75.8%. The mandibular cortical width (MCW) had the highest AUC. For FD, the total trabecular index had the highest sensitivity, while the index anterior to the mental foramen (MF) had the highest specificity. In CBCT, the AUC ranged from 51.8 to 62.0%. The indices with the highest AUC were the molar (M) and anterior (A). The symphysis (S) index had the highest sensitivity and the posterior (P) index had the highest specificity. Sensitivity and specificity were adequate for the computed tomography index (Inferior; CTI [I]). Therefore, MCW, FD of the mandible angle, and total trabecular ROI in DPR and the CTI (I), M, P, and A indices in CBCT proved to be promising tools in distinguishing individuals with low BMD. Cutoff point for these indices could be a useful tool to investigate low BMD in postmenopausal women taking AI.

Abstract: Bone quality is an important issue in dentistry. Low bone density may be associated with more severe periodontitis, and may influence implant therapy success. Recent evidence suggests that physical activity can improve alveolar bone quality. Irisin is an exercise-mediated peptide that might be involved in this process. We assessed the effect of exercise and that of intra-peritoneal irisin administration on bone quality in healthy and osteoporosis-induced rodents. This study was registered at PROSPERO (CRD42020184140), and followed PRISMA guidelines. A search by two independent examiners was conducted in five databases and gray literature up to July 2021, without restrictions regarding language or date of publication. Initially, they analyzed retrieved titles and abstracts (n=3,844) based on eligibility criteria. Of this total, 19 studies remained for full-text reading, and 16 proceeded to the data extraction and quality assessment phases. Meta-analyses were conducted (n= 6 studies) to establish the effects of irisin administration on cancellous bone mineral density (BMD). Exercise or irisin administration enhanced bone quality, but the meta-analysis showed that BMD increased only slightly in osteoporotic rodents (BMD: mean difference 0.03 mg/cm3 - 95% CI 0.01-0.05). This indicates that they had no significant benefits on the bones of healthy animals. Implications of key findings evidence the potential of irisin as an agent able to mitigate bone loss caused by osteoporosis, an outcome that could favor dental rehabilitation. More studies investigating the effect of irisin on alveolar bone are needed to elucidate its therapeutic viability and implications.

Resumo Os objetivos da ortopedia pré-cirúrgica são permitir a correção cirúrgica com mínima tensão dos tecidos envolvidos e menor restrição ao crescimento craniofacial. O objetivo deste estudo foi avaliar os benefícios do modelo nasoalveolar (NAM) como terapia pré-operatória em um paciente com fissura labiopalatina bilateral seguida de labioplastia e palatoplastia. Um paciente de 15 dias de idade foi submetido a tratamento ortopédico com NAM. Após o tratamento pré-operatório, observou-se retração da pré-maxila com redução da fissura. Devido aos efeitos bem-sucedidos do tratamento com NAM, o paciente realizou a cirurgia em um único tempo cirúrgico para correção dos lábios. Seis meses após verificou-se a continuidade da redução da fissura devido à pressão labial. Após dozes meses, o paciente foi submetido à palatoplastia. Ambas as cirurgias contribuíram para o fechamento remanescente da fissura, que foram reduzidas pela metade em comparação com o final do tratamento pré-operatório. O uso do NAM como tratamento pré-operatório proporcionou a aproximação dos segmentos alveolares, centralização da pré-maxila, diminuição da fissura palatina, resultando em melhora acentuada do arco, resultando em procedimentos cirúrgicos mais eficazes. Além disso, permitiu o reparo primário do lábio do paciente com fissura bilateral assimétrica em apenas uma cirurgia; em conseqüência, reduzindo a morbidade do tratamento e diminuição dos custos do tratamento.

Abstract The objectives of pre-surgical orthopedics are to allow surgical repair with minimal tension of the involved tissues and less restriction to the craniofacial growth. The aim of this study was to evaluate the benefits of nasoalveolar model (NAM) as a pre-operative therapy in a patient with bilateral cleft lip and palate followed by labioplasty and palatoplasty. A 15-day-old patient underwent orthopedic treatment with NAM. After pre-operative treatment, retraction of the pre-maxilla was observed with reduction of the fissure. Due to the successful effects of NAM treatment the patient had a one-step surgery for lip correction. Six months later, due to lip pressure the fissure was further decreased. After six months, the patient underwent palatoplasty. Both surgeries contributed to the remaining closure of the fissure, which were reduced by half compared to the end of pre-operative treatment. The uses of NAM as a pre-operative treatment approached the alveolar segments, centralized the pre-maxilla, decreased the cleft palate resulting in a marked improvement of the arch and provide superior surgical results. In addition, it allows the primary repair of the patient’s lip with asymmetric bilateral fissure in only one-step surgery; in consequence, it will reduce treatment morbidity and decrease cost of treatment.

RESUMO Introdução: técnicas convencionais, diretas ou indiretas, de colagem de acessórios ortodônticos falham em obter a posição ideal desses. Objetivo: comparar a acurácia da colagem virtual e da colagem direta de acessórios ortodônticos por vestibular. Métodos: uma configuração virtual única (modelo de manequim com Classe I dentária) serviu como base para a geração do modelo de referência (tratado virtualmente) e dos modelos de intervenção (10 modelos digitais e 10 modelos sólidos, obtidos por prototipagem). Quinhentos e sessenta dentes foram, então, igualmente distribuídos, em dois tempos distintos, entre um grupo de ortodontistas (Grupo I: colagem direta; Grupo II: colagem virtual). As posições individuais dos acessórios foram aferidas após a sobreposição tridimensional de modelos, em software customizado. O testet de Student para amostras pareadas e o teste Qui-quadrado foram usados para a análise estatística, ambos com nível de significância de 5%. Resultados: na comparação dos erros, em valores brutos, houve diferenças significativas apenas nas dimensões vertical (p< 0,001) e horizontal (p < 0,001). Considerando-se o agrupamento de faixas por limites clínicos dos desvios, essas diferenças foram significativas nas três dimensões: vertical (p < 0,001), horizontal (p = 0,044) e angular (p = 0,044). Conclusão: a colagem virtual possibilitou um posicionamento mais preciso dos acessórios ortodônticos. Seu potencial de precisão traz novas perspectivas ao refinamento dos protocolos indiretos.

ABSTRACT Introduction: Conventional direct and indirect bonding techniques fail to obtain the ideal bracket position. Objective: To compare the accuracy of virtual and conventional direct bonding of orthodontic accessories. Methods: A single virtual configuration (dental mannequin with Class I malocclusion) served as basis for generating the reference model (treated virtually) and the intervention models (10 digital models and 10 solid models, obtained by means of prototyping). A total of 560 teeth were then equally distributed between a group of orthodontists (Group I, direct bonding; and Group II, virtual bonding), working in two different time intervals. The individual positions of the accessories were measured after three-dimensional superimposition with customized software. The Student’s-t test for paired samples, and Chi-square tests were used for statistical analysis, both at the level of significance of 5%. Results: In comparison of the errors in raw values, there were significant differences only in the vertical (p< 0.001) and horizontal dimensions (p< 0.001). Considering the groups of ranges by clinical limits of the deviations, these differences were significant in the three dimensions, vertical (p< 0.001), horizontal (p= 0.044) and angular (p= 0.044). Conclusion: Virtual bonding made it possible to obtain more precise/accurate positioning of the orthodontic accessories. The potential accuracy of this method brings new perspectives to refining the indirect bonding protocols.

Objectives To evaluate the microbial contamination of pacifiers by Mutans Streptococci (MS) and the efficacy of different methods for their disinfection. Methods Twenty-eight children were assigned to a 4-stage changeover system with a 1-week interval. In each stage, children received a new pacifier and the parents were instructed to maintain their normal habits for 1 week. After this time, the pacifiers were subjected to the following 4 disinfection methods: spraying with 0.12% chlorhexidine solution, Brushtox® or sterile tap water, and immersion in boiling tap water for 15 minutes. Microbiological culture for MS and Scanning Electron Microscopy (SEM) were performed. The results were analyzed statistically by Friedman’s non-parametric test (a=0.05). Results The 0.12% chlorhexidine spray was statistically similar to the boiling water (p>0.05) and more effective than the Brushtox® spray and control (p<0.05). The analysis of SEM showed the formation of a cariogenic biofilm in all groups with positive culture. Conclusions Pacifiers become contaminated by MS after their use by children and should be disinfected routinely. Spraying with a 0.12% chlorhexidine solution and immersion in boiling water promoted better disinfection of the pacifiers compared with a commercial antiseptic toothbrush cleanser (Brushtox®).