Abstract: The minimally invasive endodontic access is not directly associated with tooth discoloration in the presence of bioceramic or epoxy resin-based root canal sealers. This study aimed to evaluate the influence of minimally invasive access and endodontic sealer composition on the color stability of endodontically-treated teeth, the restorative material adaptation, and the presence of remaining filling material in the pulp chamber. Endodontic access surgery was performed in maxillary central incisors, either through conservative or minimally invasive approaches, and the root was filled with AH Plus or Bio-C Sealer. The crown color was measured with a spectrophotometer at baseline and after root obturation, restoration, and specimen storage for one year in an oven. The occurrence of voids in the restoration and the remaining filling material was analyzed using micro-CT scans. The Yellowness Index (YI) and color changes (∆E00) were calculated after each color measurement. Data of micro-CT were submitted to 2-way ANOVA, and YI and ∆E00 were analyzed with repeated-measures ANOVA. Pair-wise comparisons were performed with Tukey's test (α = 0.05). The experimental conditions had no effect on the presence of the remaining material. The minimally invasive access associated with Bio-C Sealer resulted in more voids between the restoration and the remaining filling material. Only the evaluation time affected YI and ∆E00 values. Specimens became more yellow after filling and storage in the oven (the highest ∆E00 values). The present study showed that sealer and minimally invasive cavities are not associated with crown color stability following endodontic treatment. Abstract resinbased resin based sealers endodonticallytreated endodontically treated teeth adaptation chamber incisors approaches BioC Bio C obturation microCT micro CT scans (YI E00 E (∆E00 measurement 2way way 2 ANOVA ∆E0 repeatedmeasures repeated measures Pairwise Pair wise Tukeys Tukey s α 0.05. 005 0.05 . 0 05 0.05) values values) treatment E0 (∆E0 ∆E 00 0.0 (∆E 0.

Resumo Este estudo avaliou a resistência de união (RU) de sistemas de pinos de fibra de vidro convencionais, anatomizados, ajustáveis e CAD/CAM. Quarenta raízes de caninos superiores foram enfraquecidas, tratadas endodonticamente e divididas em quatro grupos (n=10). Um slice de cada terço do canal radicular (cervical, média e apical) foi submetido ao teste de push-out e o padrão de falha foi analisado posteriormente. O slice mais apical foi submetido à análise da espessura da linha de cimentação por microscopia eletrônica de varredura (MEV). Os dados referentes à RU e espessura da linha de cimentação foram submetidos ao teste de normalidade de Shapiro-Wilk seguido dos testes de variância e Tukey. O padrão de falha foi expresso em porcentagem e submetido ao teste qui-quadrado. O pino convencional apresentou menor RU em comparação aos demais pinos de fibra de vidro (p<0,05). Todos os pinos de fibra de vidro apresentaram maior percentual de falhas adesivas à dentina. A MEV evidenciou linha de cimentação mais espessa para o pino convencional em relação aos demais grupos (p<0,05), além de lacunas e espaços vazios no material restaurador. Os pinos de fibra de vidro anatomizados, ajustáveis e fresados em CAD/CAM demonstraram RU superior e melhor adaptação à dentina radicular em comparação com o pino de fibra de vidro convencional. (RU convencionais anatomizados CADCAM CAD CAM enfraquecidas n=10. n10 n n=10 . 10 (n=10) cervical, cervical (cervical pushout push out posteriormente MEV. (MEV) ShapiroWilk Shapiro Wilk Tukey quiquadrado. quiquadrado qui quadrado. quadrado qui-quadrado p<0,05. p005 p p<0,05 0 05 (p<0,05) p<0,05, , restaurador n1 n=1 1 (n=10 (MEV p00 p<0,0 (p<0,05 n= (n=1 p0 p<0, (p<0,0 (n= p<0 (p<0, (n p< (p<0 (p< (p

Abstract This study evaluated the bond strength (BS) of conventional, anatomized, adjustable, and CAD/CAM fiberglass post systems. Forty maxillary canine roots were weakened, endodontically treated, and divided into four groups (n=10). A slice from each of the three sections (cervical, middle, apical) of the root canal was subjected to the push-out test and the failure pattern was subsequently analyzed. The most apical slice was subjected to analysis of the cementation line thickness by scanning electron microscopy (SEM). Data regarding the BS and cementation line thickness were subjected to the Shapiro-Wilk normality test followed by the variance and Tukey tests. Data failure patterns were expressed as a percentage and submitted to the chi-square test. Conventional fiberglass posts had the lowest BD compared to the other fiberglass posts (p<0.05). All fiberglass posts exhibited a higher percentage of adhesive failures to dentin. The SEM demonstrated a thicker cementation line for the conventional post compared to the other groups (p<0.05), as well as gaps and voids in the cementing material. The anatomized, adjustable, and CAD/CAM milled fiberglass post systems demonstrated a superior BS and adaptation to the root dentin compared to the conventional fiberglass post. (BS anatomized adjustable CADCAM CAD CAM weakened treated n=10. n10 n n=10 . 10 (n=10) cervical, cervical (cervical middle pushout push out analyzed SEM. (SEM) ShapiroWilk Shapiro Wilk tests chisquare chi square p<0.05. p005 p p<0.05 0 05 (p<0.05) p<0.05, , material n1 n=1 1 (n=10 (SEM p00 p<0.0 (p<0.05 n= (n=1 p0 p<0. (p<0.0 (n= p<0 (p<0. (n p< (p<0 (p< (p

Abstract The survival of endodontically treated teeth depends on the remaining tooth structure. The aim of this study was to evaluate the impact of different access cavities on root canal preparation, restorative protocol, and fracture resistance of endodontically treated teeth. Fifty-six mandibular molars were divided into control (n=8) and experimental (n=16) groups according to access cavity: Traditional, Conservative, and Truss; and redistributed (n=8) according to instrumentation protocols: Reciproc Blue and R-motion. After, teeth were scanned in micro-CT and then filled and redistributed according to composite resin restoration (n=8): Filtek One BulkFill and Filtek Z350. A new micro-CT scan was performed to analyze the restorative material. Then, samples were submitted to fracture resistance testing and the failure pattern was determined. Data were analyzed using paired T-test, ANOVA, Tukey, and chi-square tests (α=0.05). In Truss, R-Motion promoted less transportation in different thirds of root canals. Higher percentages of voids (5.05%) and filling material (11.7%) were observed in Truss. Fracture resistance values were higher for the control group, followed by Truss, Conservative, and Traditional. The predominant failure pattern was type-II. In Truss, reciprocating instruments with smaller taper showed less canal transportation. Also, Truss provided higher values of fracture resistance, although it presented a higher percentage of voids and remaining filling material. Thus, in Truss, reciprocating files with smaller taper showed less canal transportation, and these cavities provided higher values of fracture resistance, although it presented a higher percentage of voids and remaining filling material. structure preparation protocol Fiftysix Fifty six n=8 n8 n 8 (n=8 n=16 n16 16 (n=16 cavity Traditional Conservative protocols Rmotion. Rmotion R motion. motion R-motion After microCT micro CT Z350 Z Then determined Ttest, Ttest T test, test T-test ANOVA Tukey chisquare chi square α=0.05. α005 α α=0.05 . 0 05 (α=0.05) RMotion Motion canals 5.05% 505 5 (5.05% 11.7% 117 11 7 (11.7% group typeII. typeII type II. II type-II Also Thus n= (n= n=1 n1 1 (n=1 Z35 α00 α=0.0 (α=0.05 5.05 50 (5.05 11.7 (11.7 (n Z3 α0 α=0. (α=0.0 5.0 (5.0 11. (11. α=0 (α=0. 5. (5. (11 α= (α=0 (5 (1 (α= ( (α

Abstract To investigate the influence of the remaining volume of a new intracanal medication based on bioceramic compounds on the bond strength (BS) and formation of an adhesive interface between calcium silicate-based and epoxy resin-based root canal sealers. For this purpose, the specimens were distributed according to the intracanal medication (n = 26): Bio-C Temp (BCT) and Ultracal XS (UXS). The roots were scanned in microCT, and after 7 days, the medication was removed. Then a new scan was performed to evaluate the volume of medication remaining. Subsequently, 40 specimens were redistributed into 2 subgroups (n = 10) and filled according to the sealer used: AH Plus (AHP) and Bio-C Sealer (BCS), to assess the bond strength by using the push-out test, and the adhesive interface by confocal laser fluorescence microscopy (CLSM) and scanning electron microscopy (SEM). The t test showed a smaller remainder of BCT (1.77 ± 0.86) compared with UXS (10.47 ± 5.78), irrespective of the root third evaluated. The BS showed that teeth with BCT + BCS had higher bond strength values (3.70 ± 1.22) when compared to the other groups: BCT + AHP (2.15 ± 1.07), UXS + BCS (3.18 ± 1.09) and UXS + AHP (2.11 ± 1.02) (p<0.001). The cervical third had higher BS when compared with the middle and apical thirds (p < 0.001), and higher number of adhesive failures. The adhesive interface in SEM and CLSM images showed better adaptation for the association between BCT + BCS. Intracanal medication and silicate-based endodontic sealer appeared to interact chemically by forming a biomineralizing layer, allowing for an increase in the bond strength and forming an adhesive interface between the materials, with no or less gap formation. (BS silicatebased silicate resinbased resin sealers purpose n 26 26) BioC Bio C (BCT UXS. . (UXS) microCT days removed Subsequently 4 10 used (AHP BCS, , (BCS) pushout push out (CLSM SEM. (SEM) 1.77 177 1 77 (1.7 0.86 086 0 86 10.47 1047 47 (10.4 5.78, 578 5.78 5 78 5.78) evaluated 3.70 370 3 70 (3.7 1.22 122 22 groups 2.15 215 15 (2.1 1.07, 107 1.07 07 1.07) 3.18 318 18 (3.1 1.09 109 09 2.11 211 11 1.02 102 02 p<0.001. p0001 p p<0.001 001 (p<0.001) 0.001, 0001 0.001 0.001) failures layer materials (UXS (BCS (SEM 1.7 17 (1. 0.8 08 8 10.4 104 (10. 57 5.7 3.7 37 (3. 1.2 12 2.1 21 (2. 1.0 3.1 31 p000 p<0.00 00 (p<0.001 000 0.00 1. (1 0. 10. (10 5. 3. (3 2. (2 p00 p<0.0 (p<0.00 0.0 ( p0 p<0. (p<0.0 p<0 (p<0. p< (p<0 (p<

Resumo O desenvolvimento, estabelecimento e reparo da periodontite apical (PA) depende de vários fatores, que incluem a susceptibilidade do hospedeiro, infecção microbiana, resposta imune, bem como a qualidade do tratamento do canal radicular e a capacidade de reparo do organismo. A compreensão das contribuições genéticas para o risco de desenvolver a PA e apresentar PA persistente tem sido extensivamente explorada na Endodontia moderna. Assim, este manuscrito pretende fornecer uma revisão da literatura em relação aos mediadores bioquímicos envolvidos na sinalização da resposta imune, osteoclastogênese e neoformação óssea, bem como os componentes genéticos envolvidos no desenvolvimento e reparo da PA. Uma revisão narrativa da literatura foi realizada através de uma pesquisa nas bases PUBMED/MEDLINE e uma pesquisa manual nos principais livros sobre a PA. O conhecimento sobre as células, receptores e moléculas envolvidas na resposta imuno-inflamatória do hospedeiro durante a progressão da PA somado ao conhecimento da biologia óssea, especialmente o papel dos osteoblastos, osteócitos e osteoclastos no turnover ósseo, permite a identificação de fatores inerentes ao hospedeiro que podem interferir tanto na progressão como no reparo destas lesões. Os principais resultados dos estudos avaliados na revisão que investigaram a correlação entre polimorfismos genéticos e PA, nos últimos cinco anos, demonstram que os fatores genéticos do indivíduo estão envolvidos no sucesso do tratamento do canal radicular. A discussão desta revisão fornece subsídios que podem ajudar a vislumbrar o desenvolvimento de novas terapias baseadas na identificação de alvos terapêuticos e no desenvolvimento de materiais e técnicas destinadas a atuar a nível molecular para o sucesso clínico, radiográfico e histológico do tratamento endodôntico.

Abstract The development, establishment and repair of apical periodontitis (AP) is dependent of several factors, which include host susceptibility, microbial infection, immune response, quality of root canal treatment and organism's ability to repair. The understanding of genetic contributions to the risk of developing AP and presenting persistent AP has been extensively explored in modern Endodontics. Thus, this article aims to provide a review of the literature regarding the biochemical mediators involved in immune response signaling, osteoclastogenesis and bone neoformation, as the genetic components involved in the development and repair of AP. A narrative review of the literature was performed through a PUBMED/MEDLINE search and a hand search of the major AP textbooks. The knowledge regarding the cells, receptors and molecules involved in the host's immune-inflammatory response during the progression of AP added to the knowledge of bone biology allows the identification of factors inherent to the host that can interfere both in the progression and in the repair of these lesions. The main outcomes of studies evaluated in the review that investigated the correlation between genetic polymorphisms and AP in the last five years, demonstrate that genetic factors of the individual are involved in the success of root canal treatment. The discussion of this review gives subsides that may help to glimpse the development of new therapies based on the identification of therapeutic targets and the development of materials and techniques aimed at acting at the molecular level for clinical, radiographic and histological success of root canal treatment.

Resumo Este relato de caso descreve o tratamento e acompanhamento de um molar inferior em uma jovem de 18 anos com cisto periapical. Assim, torna-se importante saber quais opções devemos tomar diante de uma situação clínica que não podemos resolver pelos métodos convencionais, e quais técnicas e abordagens temos para alcançar o sucesso do tratamento. Este caso mostrou o plano de tratamento e acompanhamento, por meio de imagens de tomografia computadorizada de feixe cônico (TCFC), de um molar inferior previamente tratado com grande abscesso periapical e lesão cística, no qual, a primeira abordagem do plano de tratamento foi fazer o retratamento endodôntico. Durante o preparo químico-mecânico a presença de exsudato purulento intracanal permanente impossibilitou a secagem dos canais, impedindo a obturação do sistema de canais radiculares. Devido a essa situação clínica, foi realizada abordagem cirúrgica com a intenção de reduzir esse exsudato permanente e executar uma técnica de descompressão. Após um ano de acompanhamento, os achados clínicos e radiográficos indicaram processo de reparo.

Abstract This case describes the treatment and follow-up of a mandibular molar in an 18-year-old female with a periapical cyst. Thus, it becomes important to know which options should we take when faced with a clinical situation that we cannot resolve through conventional methods, and which techniques and approaches we have to achieve treatment success. This case showed the treatment plan and follow-up, by the use of CBCT images, from a previously treated mandibular molar with a large periapical abscess and cystic lesion, in which, the first treatment plan approach was to make the endodontic retreatment. During the chemo-mechanical preparation the presence of permanent intracanal purulent exudate made it impossible to dry the canals, impeding obturation of the root canal system. Due to this clinical situation, a surgical approach was performed with the intention of reduce this permanent exudate and to execute a decompression technique. Clinical findings, periapical radiographs and cone beam computed tomographic, indicated almost complete resolution of the radiolucency, after a one-year follow-up.

Abstract This study evaluate shaping ability of heat-treated NiTi-alloy instruments associated with different final irrigation protocols in flattened root canals. Thirty human mandibular incisors with flattened root canals were divided into 5 groups (n = 10): (XP) Original Protocol XP-endo Shaper; (XP-WT) Original Protocol XP-endo Shaper with working time variation; (XP-K) XP-endo Shaper with kinematics variation; (XP-WTK) XP-endo Shaper with kinematics and working time variations; (Hyflex) Hyflex CM. For the variation in working time protocols the same sample of the XP-endo Shaper groups with and without kinematic variation were used. To evaluate final irrigation protocols, groups 1, 3 and 5 were submitted to 3 protocols: (NI) No irrigation (n = 2); (CI) conventional irrigation (n = 4), and (EndoVac) irrigation (n = 4). The samples were scanned by microcomputed tomography and prepared for scanning electron microscopy evaluation. Quantitative data were evaluated using the parametric ANOVA test, with statistical significance level set at 5%, and qualitative data obtained were compared to establish the agreement between examiners through the Kappa test. It was observed that in the analysis of XP-endo Shaper protocols, the additional working time did not cause difference in any of parameters evaluated (p > 0.05) in relation to time recommended by manufacturer. Compared to Hyflex, XP-K showed highest mean volume increase (p < 0.05) and lowest percentage of untouched walls (p < 0.05). In the qualitative evaluation, final irrigation protocol with EndoVac provided the best cleaning results when associated with XP-K and with Hyflex. Thus, supplementary techniques are effective tools to enhance cleaning and to promote higher touch of walls during root canal preparation.

Abstract This study evaluate the maxillary anterior teeth anatomy by micro-computed tomography (μCT), about relevant characteristic for endodontic treatment planning. Fifty maxillary central incisors (MCI), lateral incisors (MLI) and maxillary canines (MC) were scanned using a μCT device. Two and three-dimensional parameters at 1 to 5mm distance to the apical foramen, external anatomic characteristics of the teeth and qualitative analysis of the internal anatomy was performed. The roundness and form factor values revealed a circular canal in the apical third in the MCI and MC, whereas MLI showed flattening in the apical third. The linear regression test indicated a progressive increase in the major/minor diameters in the five mm assessed (p < 0.001). The 3D analysis revealed the greatest volume and surface area in MC. The SMI showed a cylindrical geometry of root canals. All teeth presented Vertucci’s type I root canal configuration. A mild curvature was prevalent in the MCI (45%) and a moderate one in the MLI (50%) and MC (50%). Palatal shoulder volume was smaller in the MLI (11.46 ± 3.09) than in the MCI (14.15 ± 3.85) and MC (13.95 ± 2.55). The most common exit of main apical foramen was in a central (22%), distolingual (30%) and mesiobuccal position (28%) for MCI, MLI and MC, respectively. Radicular grooves were observed in 2% of MCI and 4% of MLI. Two and three-dimensional data obtained by μCT allowed to observe morphological characteristics of internal/external anatomy of the maxillary anterior teeth. These characteristics may affect the endodontic treatment planning.

Resumo Este estudo avaliou a associação entre polimorfismos em genes que codificam os receptores de estrogênio 1 (ESR1) e 2 (ESR2), receptor de vitamina D (VDR) e no microRNA17 (que se liga à ESR1 e VDR) e a periodontite apical persistente (PAP) após o tratamento endodôntico. Foram incluídos 162 pacientes com tratamento endodôntico concluído há pelo menos um ano e que apresentavam periodontite apical no início da terapia endodôntica. Exames clínicos e radiográficos foram realizados para avaliar a presença de PAP ou tecidos perirradiculares saudáveis (cicatrizados). As amostras de saliva foram coletadas como fonte de DNA genômico. A genotipagem de ESR1 (rs2234693 e rs9340799), ESR2 (rs1256049 e rs4986938), VDR (rs739837 e rs2228570) e miRNA17 (rs4284505) foram realizadas por PCR em tempo real. O teste do qui-quadrado foi utilizado para a distribuição das frequências genotípicas e alélicas. A análise de haplótipos também foi realizada. Oitenta e nove pacientes foram incluídos no grupo “curado” e 73 no grupo “PAP”. Não foi encontrada associação entre os polimorfismos alélicos e genotípicos estudados e a PAP (p>0,05). Concluí-se que os polimorfismos genéticos em ESR1, ESR2, VDR e miRNA17 não estão associados à PAP.

Abstract This study evaluated the association between polymorphisms in genes encoding estrogen receptors 1 (ESR1) and 2 (ESR2), vitamin D receptor (VDR) and in microRNA17 (which binds to ESR1 and VDR) with persistent apical periodontitis (PAP) after the endodontic treatment. We included 162 patients who completed endodontic treatment at least one year ago and presented apical periodontitis at the beginning of the root canal therapy. Clinical and radiographic exams were performed to evaluate the presence of PAP or healthy periradicular tissues (healed). Saliva samples were collected as a genomic DNA. The genotyping of ESR1 (rs2234693 and rs9340799), ESR2 (rs1256049 and rs4986938), VDR (rs739837 and rs2228570) and miRNA17 (rs4284505) were performed by real-time PCR. Chi-square test was used to the distribution of genotype and allele frequencies. Haplotype analysis was also performed. Eighty-nine patients were included in the “healed” group and 73 in the “PAP” group. No association was found between the allelic and genotypic polymorphisms studied and PAP (p>0.05). Haplotype analysis also did not demonstrated an association (p>0.05). In conclusion, the genetic polymorphisms in ESR1, ESR2, VDR and miRNA17 are not associated with PAP.

Abstract To compare the shaping ability of different single-file systems in the preparation of mesial curved canals of mandibular molars using micro-CT technology. Fifteen mesial roots of mandibular molars with two independent and curved canals (n = 30) were selected, scanned at a resolution of 26.7 μm anatomically matched, and distributed into three groups (n = 10), according to the preparation system: WaveOne 25.08, Reciproc 25.08, and OneShape 25.06. A final micro-CT scanning was performed, data sets were registered with their respective counterparts, and compared regarding the three-dimensional (volume, surface area, and structure model index - SMI) and two-dimensional (perimeter, area, roundness, major and minor diameters) parameters, as well as, canal transportation, using ANOVA and post hoc Tukey tests (α = 5%). Overall, no difference was observed between groups regarding area, perimeter, volume, surface area, and canal transportation (p > 0.05). Within group, no canal transportation was significantly higherobserved in the apical third (0.10 ± 0.05 mm) compared to coronal (0.08±0.040 mm) and middle (0.07 ± 0.03 mm) thirds (p < 0.05). Structure model index (SMI) was statistically higher after preparation with OneShape instrument (0.36 ± 0.26) compared to other systems (p < 0.05). Within the parameters of this study, similar shaping ability was observed in the preparation of mesial curved root canals of mandibular molars with Reciproc, OneShape and WaveOne systems.

Abstract Chitosan is a natural, biocompatible chelating substance with potential for dental use. This study compared the effects of final canal irrigation with chitosan and EDTA on dentin microhardness, sealer dentin tubules penetration capacity, and push-out strength. Methodology: Fifty canine roots were distributed according to the final irrigation protocol (n=10): G1- 15% EDTA with conventional irrigation; G2- 15% EDTA with Endovac; G3- 0.2% chitosan with conventional irrigation; G4- 0.2% chitosan with Endovac; and G5- without irrigation. Specimens were obturated (AH Plus) and sectioned in 3 slices per root third. The first slice was used for microhardness and sealer penetration assessments under a laser confocal microscope. The second was utilized in a push-out strength test. The third slice was discarded. Data were analyzed using 2-way ANOVA and Tukey's post hoc test (α<0.05). Failure mode was determined at x40 magnification. Results: Microhardness reduction was more significant in groups G2 and G4 (p<0.05). Sealer penetration through dentin was significantly greater in group G2 (p<0.05). There was no significant difference between groups G1, G3, and G4 (p>0.05). In general, all experimental groups presented similar bond resistance (p>0.05) that significantly differed from the control (p<0.001). Mixed type failures were predominant. Conclusions: In general, 0.2% chitosan and 15% EDTA solutions act in a similar manner with regard to the variables studied. The use of Endovac potentiates the effect of these solutions.

Abstract Objectives This study assessed the incidence and variability features of root canals system (RCS) and their ramifications according to Pucci & Reig (PR) (1944) and the American Association of Endodontists (AAE) (2017) by micro-computed tomography (μCT). Methodology 500 representative extracted human teeth of each tooth group (n=50) (maxillary/mandibular central and lateral incisors, canines, first and second premolars and molars) were scanned by μCT with a resolution of 26.70 μm. The reconstructed cross-sections images and the visualization of the continuous slices in the transversal axis were performed using DataViewer software. RCS were classified according to Pucci & Reig (main canal, collateral canal, lateral canal, secondary canal, accessory canal, intercanal, recurrent canal) and AAE (main canal, accessory canal, lateral canal). The apical deltas were assessed for both classifications. The prevalence of apical deltas was evaluated using the Chi-squared test (p<0.05). Results According to PR, a higher incidence of lateral canals was observed in maxillary canines (10%), central incisors (8%) and first premolars (6%). Using AAE, the highest incidence of lateral canals was observed in the mandibular first premolars (85%), first and second molars (84%), lateral incisors (67%), canines (59%), and in maxillary first premolars (52%). Regarding accessory canals, the PR showed a frequency in 2% of the maxillary lateral incisors and maxillary and mandibular first premolars and 3% of mandibular first and second molars. On the other hand, the AAE showed the highest incidence of accessory canals in 86% of the maxillary first premolars, 71% in mandibular lateral incisors, 69% in mandibular first premolars, 65% in mandibular canines, and 56% in maxillary canines. The PR showed the lowest incidence of apical deltas for all dental groups when compared with AAE (p=0.004). Interestingly, distal canals in maxillary molars showed a significant discrepancy between classifications (p=0.027). Conclusions μCT enabled accurately describing the RC system and related ramifications, adding to the PR and AAE classifications, with some discrepancies reported for maxillary molars. Clinical Relevance This μCT study enabled a thorough description of the variability among root canals and their ramifications, including clinically relevant details on the presence and location of lateral canals and accessories in all human tooth groups, beyond the currently existing classification systems.

Abstract Objective: To evaluate the effect of ultrasonic and sonic activation on physicochemical properties of AH Plus, MTA Fillapex, ADSeal, GuttaFlow Bioseal, and GuttaFlow 2 sealers. Methodology: Three experimental groups were formed: no activation (NA), ultrasonic activation (UA), and sonic activation (SA). The sealers were manipulated according to the manufacturers’ instructions. A 3-mL syringe was adapted to receive 1 mL of sealer. Activation was performed with a 20/.01 ultrasonic insert (20 s/1W) in the UA group. A size 35.04 sonic tip was used (20 s/10,000 cycles/min-1) in the SA group. The molds for physicochemical analysis were filled and evaluated according to ANSI/ADA specification no. 57: setting time (ST), flow (FL), dimensional change (DC), solubility (SB), and radiopacity (RD). Statistical analysis was performed by Kruskal-Wallis, one-way ANOVA, and Tukey's tests (P<0.05). Results: Regarding ST, only AH Plus and GuttaFlow 2 in the NA group met the ANSI/ADA standards. All FL values were greater than 20 mm in diameter, as determined by ANSI/ADA. The tested sealers and protocols did not comply with the ANSI/ADA standards for DC. As for SB, only MTA Fillapex, regardless of the activation protocol, did not follow the ANSI/ADA standards. All of the investigated sealers, regardless of the activation protocol, presented radiographic density higher than 3 mm Al, as proposed by ANSI/ADA. Conclusions: UA and SA promoted changes in the physicochemical properties of the evaluated root canal sealers, mainly in ST and F. Thus, it is important to evaluate the physicochemical properties of endodontic sealers associated with activation techniques prior to clinical application in order to determine whether the properties follow the parameters set by ANSI/ADA, ensuring safety and quality of root canal filling.

Resumo A periodontite apical persistente (PAP) é uma condição que envolve uma resposta inflamatória e imunológica causada principalmente por infecções polimicrobianas de origem anaeróbia no sistema de canais radiculares, tornando o resultado e o acompanhamento do tratamento do canal radicular intimamente relacionados à resposta do hospedeiro. O reparo da periodontite apical pode estar associado a polimorfismos genéticos. Este estudo teve como objetivo avaliar a associação entre os polimorfismos genéticos do HIF1A (rs2301113 e rs2057482) com a PAP em pacientes brasileiros. Indivíduos com pelo menos 1 ano de acompanhamento após o tratamento do canal radicular (TCR) foram agendados para consulta de acompanhamento. Sessenta e quatro indivíduos com sinais/sintomas de PAP e 84 indivíduos com dentes tratados endodonticamente e tecidos perirradiculares saudáveis (cicatrizados) foram incluídos no presente estudo. O DNA genômico foi extraído da saliva e utilizado para a genotipagem do HIF1A por PCR em tempo real. O genótipo e as frequências alélicas foram comparados por teste c2 ou exato de Fisher e odds-ratio foi implementado por meio do software Epi Info 3.5.2. Todos os testes realizados foram estabelecidos com a=0,05. Não houve associação entre alelo e distribuição genotípica para polimorfismos do HIF1A e PAP (p> 0,05). Os polimorfismos genéticos em HIF1A não foram associados à periodontite apical persistente.

Abstract Persistent apical periodontitis (AP) is a situation involving an inflammatory and immune response caused mainly by anaerobic polymicrobial infection of the root canal system and the outcome and follow-up of the root canal treatment has been reported as intimately related to host response. The apical periodontitis repair might be associated with genetic polymorphisms. This study aimed to evaluate the association between HIF1A genetic polymorphisms (rs2301113 and rs2057482) with PAP in Brazilian patients. Subjects with at least 1 year of follow-up after root canal therapy (RCT) were recalled. Sixty-four subjects with signs/symptoms of PAP and 84 subjects with root canal-treated teeth exhibiting healthy perirradicular tissues (healed) were included. Genomic DNA was extracted from saliva and used for HIF1A genotyping by real-time PCR. Genotype and allele frequencies were compared by c2 or Fisher’s exact tests and odds ratio was implemented, using Epi Info 3.5.2. All tests were performed with an established alpha of 0.05. There was no association between allele and genotype distribution for HIF1As polymorphisms and PAP (p>0.05). The genetic polymorphisms in HIF1A were not associated with persistent apical periodontitis.

Abstract: The aim of this study was to evaluate the bond strength of different triccalcium silicate cements to retrograde cavity using a push out test. Thirty maxillary central incisors were shaped using #80 hand files and sectioned transversally. Root slices were obtained from the apical 4 mm after eliminating the apical extremity. The specimens were embedded in acrylic resin and positioned at 45° to the horizontal plane for preparation of root-end cavities with a diamond ultrasonic retrotip. The samples were divided into three groups according to the root-end filling material (n = 10): MTA Angelus, ProRoot MTA and Biodentine. A gutta-percha cone (#80) was tugged-back at the limit between the canal and the root-end cavity. The root-end cavity was filled and the gutta-percha cone was removed after complete setting of the materials. The specimens were placed in an Instron machine with the root-end filling turned downwards. The push-out shaft was inserted in the space previously occupied by the gutta-percha cone and push out testing was performed at a crosshead speed of 1.0 mm/min. There was no statistically significant difference in resistance to push out by the materials tested (p > 0.01). MTA Angelus and ProRoot MTA showed predominantly mixed failure while Biodentine exhibited mixed and cohesive failures. The tricalcium silicate-based root-end filling materials showed similar bond strength retrograde cavity.