One of the main causes of climate change is the increased concentration of greenhouse gases from anthropogenic sources. Therefore, the search for processes that provide mitigation of these gases is imperative and very important. Dry reforming of methane (DRM) is a process that converts CO2 and CH4 in pure syngas. Thus, this study aims to evaluate the influence of the calcination temperature (500 and 700 °C) in the titanate nanotubes (TNT) structure. The calcination at 700 °C led to a new morphology in the form of titanate nanorods (TNR). TNT and TNR nanostructures were modified with Ni and used as catalysts in the DRM reaction. The CO2 and CH4 conversions were around 60 and 48%, respectively, when using Ni-TNT500 at 700 °C, while values around 85 and 70%, respectively, were obtained using TNR in the same reactional condition. Both catalysts presented values of H2/CO ratio near 1. sources Therefore important (DRM CO CH syngas Thus 500 (50 70 C (TNT structure TNR. . (TNR) reaction 6 48 48% respectively NiTNT500 NiTNT TNT500 Ni-TNT50 8 70% condition H2CO HCO H2 H 1 50 (5 7 (TNR 4 NiTNT50 TNT50 Ni-TNT5 5 ( NiTNT5 TNT5 Ni-TNT

ABSTRACT One of the highlighted areas in the development of new materials is the generation of micro- and nanoparticles as drug carriers which allow the progress in formulations with the ability to release active agents in a controlled way. The proanthocyanidins (PAC) extracted from the bark of the Black Wattle have stood out for their biological activities. However, most polyflavonoids have some features which limit their application in the pharmaceutical field, such as light fastness, low bioavailability of active agents, and unpleasant taste. In this context, this study aims to present the synthesis and characterization of PAC-loaded lactic-co-glycolic acid (PLGA) microparticles obtained by the multiple emulsion method. The incorporation of PAC into PLGA was successfully achieved with PAC encapsulation efficiency around 73%. Spherical microparticles were obtained with a size distribution in the range of 0.6 to 2.4 μm. The presence of PAC modified the thermal properties of the PLGA matrix. The results of in vitro assays with Vero and T24 lineage celss showed that PLGA/PAC microparticles did not promote any effect on cell proliferation by MTT assay after 24 h. The novel Acacia mearnsii proanthocyanidin-loaded PLGA microparticles have potential for application in biological systems.

Abstract: Waterborne polyurethanes (WPUs) are interesting materials for coatings when compared to solvent-based polyurethanes, once that reducing the concentration of volatile organic compounds that are harmful for human health and the environment. However, the WPU has low weathering resistance. In order to improve this behavior among others properties, inorganic fillers has been added in these systems. SiO2 particles from various sources, mainly, from agro-industrial waste, as rice husk has attracted the scientific and technological interest. In this study, the accelerated weathering essay was performed in waterborne polyurethane (WPU)/ silica (from rice husk ash) composites in order to evaluate the thermal and physical changes in these materials. These composites were prepared by two distinct methods: in situ polymerization and blending method. The highest resistance to thermal degradation and to accelerated weathering was reached with WPU/silica composites obtained by blending method due the interactions between SiO2 particles and the polymer matrices. Blending method for preparation WPU/silica composites proved to be a simpler and faster method, with no drawback for large scale application.

Biodiesel purity expressed as fatty esters content is one of its most important quality parameters. Although several instrumental methods have been employed, gas chromatography with internal standard calibration has been the most used. Biodiesel is a very complex matrix, therefore finding a suitable internal standard (IS) is not straightforward. EN14103:2003 standard established methyl heptadecanoate (C17:0) as IS. Since this fatty ester is naturally present in some biodiesel feedstock as tallow, that standard was reviewed in 2011, and methyl nonadecanoate (C19:0) became the new IS. In turn, C19:0 produces a peak on the chromatogram that is difficult to resolve from methyl linoeate (C18:2) and metyl linolenate (C18:3) ones. In this paper, a GC-FID method for the determination of the esters content in methyl and ethyl biodiesel from canola and soy oils, using hexadecyl acetate as a new internal standard was validated. EN14103:2003 was used as reference method. Method selectivity, accuracy (t student parameter < 2.18 from both methods), repeatability (0.1 - 0.4%), intermediate precision (0.2 - 1.8%), and robustness (0.1 - 1.6%) were investigated and considered appropriate for the scope.

Embora tecnologias de captura e armazenamento de carbono (CCS) estejam recebendo grande atenção para a mitigação do efeito estufa, ainda existem muitas desvantagens, tais como o aumento dos custos e gastos de energia associados à sua implementação. No entanto, o uso de CO2 como bloco de construção C1 em síntese orgânica pode ser muito atraente para o desenho de processos ecológicos. Neste trabalho, foram estudados a sorção de CO2 e atividades catalíticas de alguns líquidos iônicos (ILs) base imidazólio para síntese de carbonato cíclico. O trabalho demonstra que a presença de um grupo nucleófilo no sistema catalítico pode melhorar seu desempenho, através da utilização de um IL com ânion halogenado ou por mistura de co-catalisador halogenado com ILs. A última abordagem permitiu a obtenção de um sistema de captura de CO2 eficaz, constituída por IL fluorado mais ZnBr2 que realiza a síntese de carbonato cíclico com 90% de rendimento e 82% de seletividade.

Although the carbon capture and storage (CCS) technologies are receiving great attention for mitigation of greenhouse gas effect, the increasing costs and energy penalties associated to its implementation are still major drawbacks. However, the use of CO2 as a C1 building block in organic synthesis can be very attractive for the design of environmentally friendly processes. In this work, we have studied both the CO2 sorption and catalytic activities of some imidazolium based ionic liquids (ILs) for cyclic carbonate synthesis. The work demonstrates that the presence of a nucleophilic group in the catalytic system can enhance its performance by the use of an IL with a halide anion or by mixing a halide co-catalyst with ILs. The latter approach allowed to obtain an effective system for CO2 capture constituted by a fluorinated IL plus ZnBr2 that performs cyclic carbonate synthesis with 90% yield and 82% of selectivity.