ABSTRACT Introduction: Although nerves and vessels of the penis play important role in erection, there are few studies on their development in human fetus. Therefore, the objective of the present study is to analyze, quantitatively, in the corpora cavernosa and corpus spongiosum, the development of the nerves and vessels in the fetal penis at different gestational ages. Material and Methods: Fifty-six fresh, macroscopically normal human fetuses aged from 13 to 36 weeks post-conception (WPC) were used. Gestational age was determined by the foot length criterion. Penises were immediately fixed in 10% formalin, and routinely processed for paraffin embedding, after which tissue sections from the mid-shaft were obtained. We used immunohistochemical staining to analyze the nerves and vessels in the corpus cavernous and in the corpus spongiosum. These elements were identified and quantified as percentage by using the Image-J software. Results: The quantitative analysis showed that the percentage of nerves varied from 3.03% to 20.35% in the corpora cavernosa and from 1.89% to 23.88% in the corpus spongiosum. The linear regression analysis indicated that nerves growth (incidence) in the corpora cavernosa and corpus spongiosum correlated significantly and positively with fetal age (r2=0.9421, p<0.0001) and (r2=0.9312, p<0.0001), respectively, during the whole fetal period studied. Also, the quantitative analysis showed that the percentage of vessels varies from 2.96% to 12.86% in the corpora cavernosa and from 3.62% to 14.85% in the corpus spongiosum. The linear regression analysis indicated that vessels growth (appearance) in the corpora cavernosa and corpus spongiosum correlated significantly and positively with fetal age (r2=0.8722, p<0.0001) and (r2=0.8218, p<0.0001), respectively, during the whole fetal period studied. In addition, the linear regression analysis demonstrated a more intense growth rate of nerves in the corpus spongiosum during the 2nd trimester of gestation, when compared with nerves in the corpora cavernosa. In addition, the linear regression analysis demonstrated a more intense growth rate of vessels in the corpus spongiosum when compared with the corpora cavernosa, during the whole fetal period studied. Conclusions: In the fetal period, the human penis undergoes major developmental changes, notably in the content and distribution of nerves and vessels. We found strong correlation between nerves and vessels growth (amount) with fetal age, both in the corpora cavernosa and corpus spongiosum. There is significant greater proportional number of nerves than vessels during the whole fetal period studied. Also, nerves and vessels grow in a more intense rate than that of the corpora cavernosa and corpus spongiosum areas. Introduction erection fetus Therefore quantitatively ages Methods Fiftysix Fifty six fresh 1 3 postconception post conception WPC (WPC criterion 10 formalin embedding midshaft mid shaft obtained ImageJ Image J software Results 303 03 3.03 2035 20 35 20.35 189 89 1.89 2388 23 88 23.88 incidence (incidence r2=0.9421, r209421 r r2 0 9421 (r2=0.9421 p<0.0001 p00001 p 0001 r2=0.9312, r209312 9312 (r2=0.9312 p<0.0001, , respectively studied Also 296 2 96 2.96 1286 12 86 12.86 362 62 3.62 1485 14 85 14.85 appearance (appearance r2=0.8722, r208722 8722 (r2=0.8722 r2=0.8218, r208218 8218 (r2=0.8218 addition nd gestation Conclusions changes amount (amount areas 30 3.0 203 20.3 18 8 1.8 238 23.8 r2=0.9421 r20942 942 (r2=0.942 p<0.000 p0000 000 r2=0.9312 r20931 931 (r2=0.931 29 9 2.9 128 12.8 6 3.6 148 14.8 r2=0.8722 r20872 872 (r2=0.872 r2=0.8218 r20821 821 (r2=0.821 3. 20. 1. 23. r2=0.942 r2094 94 (r2=0.94 p<0.00 p000 00 r2=0.931 r2093 93 (r2=0.93 2. 12. 14. r2=0.872 r2087 87 (r2=0.87 r2=0.821 r2082 82 (r2=0.82 r2=0.94 r209 (r2=0.9 p<0.0 p00 r2=0.93 r2=0.87 r208 (r2=0.8 r2=0.82 r2=0.9 r20 (r2=0. p<0. p0 r2=0.8 r2=0. (r2=0 p<0 r2=0 (r2= p< r2= (r2 (r

Resumen Introducción : Los adultos mayores con enfermedades crónicas avanzadas y necesidad de cuidados paliativos están más expuestos a la polifarmacia y a consumir medicación potencialmente inapropiada, la cual genera un alto riesgo de eventos adversos y alteración de la calidad de vida. El objetivo de este estudio fue describir la frecuencia de consumo de medicación potencialmente inapropiada de adultos mayores con necesidad de cuida dos paliativos que ingresaron a cuidados domiciliarios luego de una hospitalización. Métodos : Estudio de corte transversal observacional de registros de dispensación e historias clínicas electró nicas, de adultos mayores en un sistema de cuidados domiciliarios y con necesidades de cuidados paliativos según el rastreo con la herramienta NECPAL, los índices PROFUND y/o PALIAR. Se analizó el consumo de fárma cos durante los 180 días posteriores al ingreso a cuidados domiciliarios. Se clasificaron los fármacos como poten cialmente inapropiados según criterios de LESS-CHRON. Resultados : Se incluyeron 176 pacientes, edad prome dio 87.4 años, 67% mujeres; 78% eran pluripatológicos y 22% presentaban una enfermedad única crónica progre siva. La mortalidad a los 6 meses fue 73%. La mediana de consumo de fármacos por paciente fue 9.1 (RIC = 4-9.7). El 87% consumía medicación potencialmente inapropia da, principalmente antihipertensivos, benzodiacepinas y antipsicóticos. Conclusión : Este estudio observó que los adultos ma yores, con necesidad de cuidados paliativos en cuidados domiciliarios, tienen un alto consumo de medicación potencialmente inapropiada. Esto refuerza la necesidad de implementar intervenciones efectivas centradas en el paciente, para prevenir la prescripción inadecuada y estimular la de-prescripción.

Abstract Introduction : Older adults with advanced chronic diseases and palliative care needs are more exposed to polypharmacy and use of potentially inappropriate medication, which generates a high risk of adverse events and impaired quality of life. The objective of this study was to describe the frequency of potentially inappropriate medication use among older adults with palliative care needs receiving home care services after hospital discharge. Methods : Observational cross-sectional study of pharmacy dispensing and electronic health records, of older adults in a home care system and with palliative care needs according to the screening with the NECPAL tool or the PROFUND and/or PALIAR indexes. Dispensed medications during 180 days after admission to home care were analyzed. Medications were classified as po tentially inappropriate according to the LESS-CHRON criteria. Results : We included 176 patients, mean age 87.4 years, 67% were women; 73% were pluripathologic pa tients and 22% had one chronic progressive disease. Mortality at 6 months was 73%. Median frequency of dispensed medications per patient was 9.1 (IQR = 4-9.7). The frequency of potentially inappropriate medication dispensation among patients was 87%, mainly antihy pertensives, benzodiazepines and antipsychotics. Conclusion : This study observed that dispensation of potentially inappropriate medication among older adults with palliative care needs and home care services is very high. This emphasizes the need for effective patient-centered interventions to prevent inadequate prescription and stimulate de-prescription.

Resumo A biodiversidade global encontra-se sob ameaça substancial devido às invasões biológicas, um problema agravado pelas mudanças climáticas. Tais invasões têm efeitos prejudiciais sobre o meio ambiente, economia e saúde humana, resultando em encargos financeiros significativos. Recentemente, a compreensão desses desafios se tornou prioridade destacada na comunidade científica. Este estudo se concentra na avaliação do Schinus terebinthifolia, nativa da América do Sul, e sua disseminação invasiva para a América do Norte e Central, o que resultou em ampla distribuição e impacto considerável. Os principais objetivos deste estudo consistem em analisar a distribuição potencial da espécie sob cenários climáticos atuais e futuros, identificando as áreas onde seu nicho climático está se alterando. A coleta abrangeu um vasto conjunto de mais de 30.000 registros de ocorrências da espécie, nas bases de bados (1) Global Biodiversity Information Facility com 22.163 registros (GBIF), (2) O Herbário virtual Reflora com 1.438 registros e o NeoTropTree com 6.591 registros e após um processo de filtragem, 992 ocorrências foram consideradas para modelagem. Nesse processo, empregamos dados climáticos e projeções climáticas, recorrendo a diversos algoritmos, com destaque para a metodologia do modelo de consenso. Os resultados da pesquisa revelam uma clara tendência de redução na adequação do habitat da S. terebinthifolia, especialmente sob cenários de elevado aquecimento global. Isso acentua a urgência da implementação de medidas de controle de emissões e estratégias de mitigação. Adicionalmente, o estudo ressalta a importância crucial da vigilância contínua, bem como das ações de controle e restauração de ecossistemas afetados. O papel relevante desempenhado por S. terebinthifolia em suas áreas nativas e invadidas chama a atenção para a necessidade de adotar abordagens de manejo abrangentes. Diante do cenário de mudanças climáticas e das ameaças à biodiversidade, este estudo contribui com perspicazes observações sobre a dinâmica das invasões biológicas. O sucesso na abordagem dessas questões depende de uma cooperação estreita entre a comunidade científica, legisladores, gestores de terras e as comunidades locais. Essa colaboração é essencial para orientar e conduzir os esforços de conservação e gestão da biodiversidade em um mundo em constante evolução. encontrase encontra biológicas ambiente humana significativos Recentemente científica Sul Central considerável futuros alterando 30000 30 000 30.00 1 (1 22163 22 163 22.16 GBIF, GBIF , (GBIF) 2 (2 1438 438 1.43 6591 6 591 6.59 filtragem 99 modelagem algoritmos consenso S mitigação Adicionalmente contínua afetados abrangentes legisladores locais evolução 3000 3 00 30.0 ( 2216 16 22.1 (GBIF 143 43 1.4 659 59 6.5 9 300 0 30. 221 22. 14 4 1. 65 5 6.

Abstract Global biodiversity is under substantial threat due to biological invasions, a problem exacerbated by climate change. Such invasions have detrimental effects on the environment, economy, and human health, resulting in significant financial burdens. Recently, understanding these challenges has become a highlighted priority within the scientific community. This study focuses on the evaluation of Schinus terebinthifolia, native to South America, and its invasive spread into North and Central America, which has resulted in wide distribution and considerable impact. The primary objectives of this study include analyzing the potential distribution of the species under current and future climate scenarios, identifying the areas where its climatic niche is changing. Data collection encompassed a vast dataset of over 30,000 occurrence records of this species, from the following databases: (1) The Global Biodiversity Information Facility provided 22,163 records (GBIF), (2) The virtual Herbarium Reflora contributed 1,438 records, and NeoTropTree made available 6,591 records. Following a rigorous filtering process, 992 occurrences were considered for modeling. In this process, we utilized climate data and climate projections, employing various algorithms, with an emphasis on the consensus model methodology. The research results reveal a clear trend of reduced habitat suitability for S. terebinthifolia, especially under scenarios of high global warming. This accentuates the urgency of implementing emission control measures and mitigation strategies. Additionally, the study underscores the crucial importance of continuous monitoring, as well as actions for controlling and restoring affected ecosystems. The significant role played by S. terebinthifolia in both its native and invaded areas highlights the need for comprehensive management approaches. In the face of climate change and biodiversity threats, this study provides insightful observations on the dynamics of biological invasions. Success in addressing these issues relies on close cooperation between the scientific community, policymakers, land managers, and local communities. This collaboration is essential for guiding and conducting conservation and biodiversity management efforts in an ever-evolving world. environment economy health burdens Recently community America impact changing 30000 30 000 30,00 databases 1 (1 22163 22 163 22,16 GBIF, GBIF , (GBIF) 2 (2 1438 438 1,43 6591 6 591 6,59 process 99 modeling projections algorithms methodology S warming strategies Additionally monitoring ecosystems approaches threats policymakers managers communities everevolving ever evolving world 3000 3 00 30,0 ( 2216 16 22,1 (GBIF 143 43 1,4 659 59 6,5 9 300 0 30, 221 22, 14 4 1, 65 5 6,

Resumo Uma nova espécie de coccídio (Protozoa: Apicomplexa: Eimeriidae) do canário-da-terra, Sicalis flaveola, é relatada no Brasil. Oocistos esporulados de Isospora bertoi n. sp. são esféricos a subesféricos; 23,6 (21,1-26,5) x 22,0 (19,4-24,6) µm com índice morfométrico (L/W) de 1,1 (1,0-1,2); com parede lisa constituída por duas camadas com ~1,1 μm. Micrópila e resíduo de oocisto estão ausentes, mas grânulos polares estão presentes. Os esporocistos são elipsoidais alongados, 16,2 (13,6-17,9) x 10,1 (8,9-12,4) µm;. O corpo Stieda é em forma de botão, enquanto que os corpos de Sub-Stieda e Para-Stieda estão ausentes. O resíduo do esporocisto é compacto e constituido por centenas de grânulos espalhados entre os esporozoítos. O esporozoíto é claviforme com corpo e núcleo refráteis posteriores alongados. Protozoa (Protozoa Apicomplexa Eimeriidae canáriodaterra, canáriodaterra canário da terra, terra canário-da-terra flaveola Brasil n sp subesféricos 236 23 6 23, 21,126,5 211265 21,1 26,5 21 1 26 5 (21,1-26,5 220 22 0 22, 19,424,6 194246 19,4 24,6 19 4 24 (19,4-24,6 L/W LW L W (L/W 11 1, 1,01,2 1012 1,0 1,2 2 (1,0-1,2) ~1, μm ausentes presentes alongados 162 16 16, 13,617,9 136179 13,6 17,9 13 17 9 (13,6-17,9 101 10 10, 8,912,4 89124 8,9 12,4 8 12 (8,9-12,4 µm. . µm; botão SubStieda Sub ParaStieda Para esporozoítos 126 21,126, 21126 211 21, 265 26, (21,1-26, 424 19,424, 19424 194 19, 246 24, (19,4-24, 01 1,01, (1,0-1,2 ~1 617 13,617, 13617 136 13, 179 17, (13,6-17, 912 8,912, 8912 89 8, 124 12, (8,9-12, 21,126 2112 (21,1-26 42 19,424 1942 (19,4-24 1,01 (1,0-1, ~ 61 13,617 1361 (13,6-17 91 8,912 891 (8,9-12 21,12 (21,1-2 19,42 (19,4-2 (1,0-1 13,61 (13,6-1 8,91 (8,9-1 (21,1- (19,4- (1,0- (13,6- (8,9- (21,1 (19,4 (1,0 (13,6 (8,9 (21, (19, (1, (13, (8, (21 (19 (1 (13 (8 (2 (

Abstract A new species of coccidia (Protozoa: Apicomplexa: Eimeriidae) is described from the saffron finch, Sicalis flaveola, is reported from Brazil. Sporulated oocysts of Isospora bertoi n. sp. are spherical to subspherical; 23.6 (21.1-26.5) x 22.0 (19.4-24.6) µm; shape Index (L/W ratio) 1.1 (1.0-1.2) µm; with bilayer smooth walls, ~1.1 μm. Micropyle and oocyst residuum are absent, but polar granules are present. Sporocysts are elongated ellipsoidal, 16.2 (13.6-17.9) x 10.1 (8.9-12.4) µm. Stieda body is button-shaped and Sub-Stieda and Para-Stieda body are absent. Sporocyst residuum is compact and composed of hundreds of granules scattered among the sporozoites. The sporozoite is claviform with an elongated posterior refractile body and nucleus. Protozoa (Protozoa Apicomplexa Eimeriidae finch flaveola Brazil n sp subspherical 236 23 6 23. 21.126.5 211265 21.1 26.5 21 1 26 5 (21.1-26.5 220 22 0 22. 19.424.6 194246 19.4 24.6 19 4 24 (19.4-24.6 µm L/W LW L W ratio 11 1. 1.01.2 1012 1.0 1.2 2 (1.0-1.2 walls ~1. μm absent present ellipsoidal 162 16 16. 13.617.9 136179 13.6 17.9 13 17 9 (13.6-17.9 101 10 10. 8.912.4 89124 8.9 12.4 8 12 (8.9-12.4 buttonshaped button shaped SubStieda Sub ParaStieda Para sporozoites nucleus 126 21.126. 21126 211 21. 265 26. (21.1-26. 424 19.424. 19424 194 19. 246 24. (19.4-24. 01 1.01. (1.0-1. ~1 617 13.617. 13617 136 13. 179 17. (13.6-17. 912 8.912. 8912 89 8. 124 12. (8.9-12. 21.126 2112 (21.1-26 42 19.424 1942 (19.4-24 1.01 (1.0-1 ~ 61 13.617 1361 (13.6-17 91 8.912 891 (8.9-12 21.12 (21.1-2 19.42 (19.4-2 (1.0- 13.61 (13.6-1 8.91 (8.9-1 (21.1- (19.4- (1.0 (13.6- (8.9- (21.1 (19.4 (1. (13.6 (8.9 (21. (19. (1 (13. (8. (21 (19 ( (13 (8 (2

ABSTRACT Objective: To evaluate the anatomical aspects of the kidney surface in human fetuses during the second gestational trimester. Material and Methods: We studied 108 kidneys obtained from 54 human fetuses (29 males and 25 females). The kidney was dissected and the number of clefts was counted. The renal volume was also assessed. To compare the quantitative data in both sexes, the Students-t-test was used (p < 0.05). Simple linear correlations were calculated for all kidney measurements, according to fetal age. Statistical analysis was performed with the R program (Version 3.5.1). Results: The fetuses ranged in age between 11.4 to 23 weeks post-conception. The renal volume of the right kidney ranged from 0.09 to 2.397 cm (mean=0.8479) and the renal volume of the left kidney ranged from 0.07 to 2.416 cm (mean=0.8036). The mean number of renal clefts in fetuses studied was 15.25 (7 to 28). There was no statistical significant difference in renal clefts between the sides either in males (p = 0.646) or in females (p = 0.698). Also, there was no significant difference in the mean number of renal clefts between male and female fetuses in right kidney (p = 0.948) and in left kidney (p = 0.939). Conclusions: The number of renal clefts has a great variation, weak correlation and no tendency to decrease during the 2nd gestational trimester. The number of clefts in right kidney of total sample and female fetuses has a significant development with age.

ABSTRACT Background: To analyze the incidence of epididymal anomalies (EAs) associated to spermatic obstruction in patients with undescended testis (UT) according to testicular position and age. Materials and Methods: We studied 87 patients (110 testis) with cryptorchidism and analyzed the presence of EAs correlated with the testicular position, age and patency of the processus vaginalis (PV). To analyze the relations between the testis and epididymis we considered three situations: (a) Normal pattern: the epididymis was attached to the testis at the head and tail and epididymis totally attached to the testis; (b) EAs: when the epididymis was attached to the testis only at the head (Figure-1A) and (c) EAs associated to spermatic obstruction: epididymis was attached to the testis only at the tail (Figure-1B) and when there are no visible connection between testis and epididymis (Figure-1C). We used the Wilcoxon-Mann-Whitney test and the Chi-square test for contingency analysis (p <0.05). Results: The mean age of the patients was 5.18 years (SD=2.867). Of 110 testes analyzed, 14 were abdominal (12.72%); 83 inguinal (75.45%) and 13 suprascrotal (11.81%). Normal relationships between testis and epididymis were observed in 54 patients (62.1%) with no significant differences in relation to the patient's age (p=0.666). Epididymal tail disjunction was observed in 23 patients (26.44%), with no significant differences in relation to age (p=0.59). EAs associated to spermatic obstruction were observed in 16 patients (18.4%), also with no significant differences in relation to age (p=0.684). We did not observe significant correlation between the testis position and the incidence of EAs (p=0.119). We did not observe significant correlations between patency of the PV (64.7%) and incidence of EAs (p=0.742). Conclusions: Epididymal anomalies associated with spermatic obstruction are present in almost 20% of undescended testes, without significant correlation with age, testicular position and patency of the PV. This information needs to be correlated to the infertility risk of this congenital anomaly.

This study aimed to develop a reliable stability-indicating method (SIM) for amoxicillin 500 mg capsules (DP-drug product). A literature review addressing amoxicillin (AMX; DS-drug substance) forced degradation studies and the existing SIMs was conducted to verify the most significant outcomes. Subsequently, the forced degradation of DP and DS was carried out following the Brazilian Health Surveillance Agency (ANVISA) guidelines, including thermal degradation (dry and wet heat), acidic and alkaline hydrolyses, hydrogen peroxide oxidation, reaction with copper, and photodegradation. Both DS and DP were more susceptible to 0.015 M NaOH, resulting in approximately 50% degradation. AMX DS and DP were not significantly photodegraded, but some degradation products (PDegs) showed susceptibility to light exposure. Thermodegraded samples showing ≥ 10% degradation exhibited modified profiles in thermogravimetric (TG) and differential scanning calorimetric (DSC) analyses. The X-ray powder diffraction patterns (XRPD) of DS samples exposed to dry and wet heat displayed complete amorphization of AMX, attesting to the occurrence of physical degradation concomitantly with chemical degradation, which can alter the drug’s bioavailability. In contrast, the thermodegraded DP samples exhibited intact AMX crystals interspersed with the amorphous form, perhaps partly protected by the excipient. The validated SIM was able to detect and quantify about 80 PDegs.

Resumo A adição de cinzas em matrizes cimentícias é essencial para se alcançar os requisitos da Política Nacional dos Resíduos Sólidos. Entretanto, deve-se buscar tecnologias que viabilizem tais aplicações, principalmente quando o material apresenta adequada atividade pozolânica. O objetivo deste trabalho foi verificar a atividade pozolânica da cinza volante proveniente da queima de carvão mineral, proveniente do processo de fabricação de alumínio, como adição mineral em argamassas e concretos convencionais. Para isso foram realizados ensaios de caracterização físico-química da amostra de cinza e do comportamento mecânico de traços de argamassas e concretos comercialmente empregados. Os resultados demonstraram que a cinza em questão possui atividade pozolânica conforme normas ABNT empregadas e quando inserida nas matrizes cimentícias estudadas, apresentaram o desempenho esperado para este tipo de adição (maior resistência mecânica em idades mais avançadas).

Abstract The addition of ash, initially classified as waste in cement matrices, is essential to achieve the requirements of National Policy of Solid Waste. However, technologies that enable such applications should be sought, especially when the material has adequate pozzolanic activity. The aim of this study was to verify the pozzolanic activity of fly ash from coal burning, from the aluminum manufacturing process, such as mineral admixture in mortars and conventional concrete. For that, physicochemical characterization of the ash sample and the mechanical behavior of mix dosage of mortar and commercially used concrete tests were carried out. Results showed the ash in evaluation has pozzolanicity as relevant standards employed and when inserted in the studied cementitious matrices, showed the expected performance for this type of addition (higher mechanical strength at older ages).

ABSTRACT Purpose: To evaluate if late hormonal replacement is able to recover the prostatic tissue modified by androgenic deprivation. Materials and Methods: 24 rats were assigned into a Sham group; an androgen deficient group, submitted to bilateral orchiectomy (Orch); and a group submitted to bilateral orchiectomy followed by testosterone replacement therapy (Orch+T). After 60 days from surgery blood was collected for determination of testosterone levels and the ventral prostate was collected for quantitative and qualitative microscopic analysis. The acinar epithelium height, the number of mast cells per field, and the densities of collagen fibers and acinar lumen were analyzed by stereological methods under light microscopy. The muscle fibers and types of collagen fibers were qualitatively assessed by scanning electron microscopy and polarization microscopy. Results: Hormone depletion (in group Orch) and return to normal levels (in group Orch+T) were effective as verified by serum testosterone analysis. The androgen deprivation promoted several alterations in the prostate: the acinar epithelium height diminished from 16.58±0.47 to 11.48±0.29μm; the number of mast cells per field presented increased from 0.45±0.07 to 2.83±0.25; collagen fibers density increased from 5.83±0.92 to 24.70±1.56%; and acinar lumen density decreased from 36.78±2.14 to 16.47±1.31%. Smooth muscle was also increased in Orch animals, and type I collagen fibers became more predominant in these animals. With the exception of the densities of collagen fibers and acinar lumen, in animals receiving testosterone replacement therapy all parameters became statistically similar to Sham. Collagen fibers density became lower and acinar lumen density became higher in Orch+T animals, when compared to Sham. This is the first study to demonstrate a relation between mast cells and testosterone levels in the prostate. This cells have been implicated in prostatic cancer and benign hyperplasia, although its specific role is not understood. Conclusion: Testosterone deprivation promotes major changes in the prostate of rats. The hormonal replacement therapy was effective in reversing these alterations.

PURPOSE: The aim of this study was to evaluate the expression of leptin and its receptor in histological sections of prostate tumors, and their association with prognostic factors. METHODS: A total of 532 surgical specimens from prostate cancer were studied. After histopathological diagnosis, the samples were included in tissue microarrays containing cores from tumor and non-tumor (benign prostatic hyperplasia) areas. These were immunostained with anti-leptin and anti-leptin-receptor antibodies. Objective and subjective analyses were performed. Student's-t-test and ANOVA were used to compare mean values, and linear regression was used to evaluate the correlation between histological results and prognostic indicators. RESULTS: Leptin receptor expression was reduced in tumors with a positive surgical margin, urethral margin involvement, and seminal vesicles invasion. Further, there was a negative correlation between the expression of leptin receptor in tumor areas and the sum of prognostic factors, suggesting that leptin receptor may predict the aggressiveness of disease. CONCLUSION: Our findings suggest that leptin receptor expression is a potential prognostic factor for PCa. Further investigation is needed to support the use of leptin receptor as a novel biomarker, although leptin itself does not seem to predict the aggressiveness of prostate cancer.

A tendência por unidades de produção mais sustentáveis vem obrigando a indústria de alumínio a adotar estratégias para reduzir o consumo de energia e minimizar a geração de resíduos. Procedimentos nesta direção têm sido implementados em fornos de cozimento de anodo, onde alguns aprimoramentos têm permitido a redução no consumo de energia. Entretanto, sabe-se que durante a etapa de queima do anodo, elevada quantidade de calor é ainda dissipada para o ambiente, aumentando os custos com energia. Desta forma, o presente trabalho tem por objetivo apresentar alternativas de redução do consumo de combustível do forno de cozimento de anodo considerando, para isto, o transporte de calor das câmaras de combustão desde as paredes refratárias até o bloco de carbono, passando pelo coque fluido. Os resultados aqui obtidos indicam que uma possível mudança da distribuição do tamanho de partículas do coque, bem como, a adição de uma manta isolante no topo do forno pode aperfeiçoar o desempenho do sistema quando o foco é sustentabilidade e otimização do processo.

The trend for sustainable production units induced the aluminum industry to adopt strategies of reducing the energy consumption and waste generation. In this sense, several procedures have been carried out in the anode baking furnace, reducing its energy consumption. However, during the carbon block thermal treatment, a great amount of heat is still released to the environment, increasing the energy cost. Therefore, the present work aims to show alternatives of reducing the anode furnace energy consumption considering the heat flow from the combustion chamber, via the flue wall and the fluid coke, till the anode. The results point out that a change in the fluid coke particle size distribution as well as placing an insulating blanket on the top of the furnace can optimize the anode furnace performance when the focus is sustainability and the process optimization.

Encontrar aplicações sustentáveis para o resíduo de bauxita tem se mostrado um dos principais desafios da indústria do alumínio na atualidade. Com esse propósito, a geopolimerização pode se tornar uma solução interessante, uma vez que essa técnica seria capaz de tirar proveito de algumas das características mais típicas desse resíduo, como sua elevada alcalinidade e o seu significativo teor de compostos de silício e alumínio, produzindo materiais sólidos semelhantes em propriedades às cerâmicas tradicionais. Neste trabalho, o processamento, as propriedades e as possíveis aplicações dos geopolímeros compostos por resíduo de bauxita foram analisados. Além dos ensaios de porosidade aparente e resistência mecânica, as amostras preparadas também foram submetidas a um ensaio de lixiviação, de modo a já realizar uma avaliação prévia dos potenciais riscos ambientais decorrentes da utilização de um possível produto, e de quais procedimentos favoreceriam a sua passivação. Entre os principais resultados obtidos, verificou-se que a queima a 800 °C permitiu a algumas das composições desenvolvidas alcançarem valores de resistência à compressão da ordem de até 30 MPa, além de uma resistência à lixiviação muito próxima à de um tijolo de argila prensado comum, o que já permite considerar a construção civil como um dos setores mais favoráveis para a aplicação dos geopolímeros com resíduo de bauxita, principalmente pela enorme capacidade de consumo desse setor e da sua crescente demanda por produtos mais sustentáveis.

Finding sustainable applications for the bauxite residue is one of the leading challenges in the aluminium industry. For this purpose, the geopolymerization could become an interesting alternative, because this technique could make use of some of the typical characteristics of the bauxite residue, such as its alkalinity and expressive silicates and aluminates contents, resulting in solid materials with similar properties to usual traditional ceramics. In this work, the properties, processing and possible applications of such materials were analyzed. Besides the apparent porosity and the mechanical resistance tests, the obtained samples were also submitted to a leaching test, aiming to a preliminary evaluation of the potential environmental risks of application that a supposed product would represent, and which procedures could favour its passivation. As the main results, it was possible to verify that firing at 800 °C allowed some compositions to reach compression resistance values up to 30 MPa, and a leaching resistance closer to a common pressed clay brick, which makes the building materials a potential area of application for the bauxite residue geopolymers, based on the enormous consumption capacity of this area and its increasing demand for more sustainable products.

A literatura indica diversos tipos de ensaios e diferentes métodos de avaliação de dano por choque térmico. Adicionalmente sabe-se que, em determinadas aplicações, esse tipo de dano é um dos principais responsáveis pela degradação do revestimento refratário. Neste contexto e buscando a melhor forma de reproduzir as condições em serviço do revestimento refratário, o presente trabalho foi realizado visando analisar qual tipo de ensaio de choque térmico e método de avaliação do dano são os mais adequados para avaliar o desempenho destes materiais. Essa análise foi baseada em uma revisão bibliográfica e resultados obtidos em laboratório, em que se comparou e avaliou as vantagens e desvantagens dos métodos mais relevantes encontrados na literatura. Por fim, com o auxilio da ferramenta SWOT foi possível verificar se o método adotado pelos autores desse trabalho é adequado para auxiliar na seleção do refratário para aplicação em calcinadores de leito fluidizado.

The literature shows different tests and techniques for evaluating the thermal shock damage. Additionally, it is known that, for certain applications, this type of wear mechanism is one of the main causes of fluid flash calciner refractory degradation. Within this context and in order to find the best way to reproduce the refractory lining service conditions, this work was carried out to point out which thermal shock test and damage assessment method are more suitable to evaluate these materials. This analysis was based on a literature review and laboratory experiments, comparing and evaluating the advantages and disadvantages of the most important methods available. Finally, with the support of the SWOT tool it was possible to evaluate whether the method adopted by the authors of this work is appropriated for helping the selection of the refractories for calciners application.

Nos últimos anos a produção mundial de alumínio tem aumentado e para as empresas continuarem competitivas torna-se necessário que a média do custo de produção do metal seja reduzida. Uma das alternativas é aumentar a vida útil dos refratários usados em fornos de cozimento de anodo, bem como a sua capacidade de produção. Ambas estratégias podem resultar em maior qualidade do anodo e redução no custode manutenção do forno. O presente trabalho tem por objetivo apresentara caracterização termo-mecânica dos tijolos refratários utilizados em fornos de cozimento de anodo e a resistência destes materiais ao ataque químico. Os resultados indicam que a escolha da composição mais adequada depende de uma análise sistêmica das propriedades a alta temperatura, da resistência química e das práticas operacionais do forno.

In the latest years the worldwide production of aluminum is increasing and for the companies to keep their competitiveness it is necessary to reduce the average cost of the metal production. One of the alternatives is to increase the refractories working life used in anode baking furnaces and their production capacity. Both strategies may result in a higher anode quality and reduction of the furnace maintenance costs. This paper aims to present the thermo-mechanical characterization of the refractory bricks used in anode baking furnaces and their resistance to chemical attack. The results indicated that the selection of the most suitable composition depends on a systemic analysis involving the high temperature properties, chemical resistance and the operational practices of the furnace.

Dentre as diversas tecnologias existentes na produção do alumínio primário, o transporte de alumínio líquido em cadinhos (capacidade 8 a 10 t) por longas distâncias (entre 100 e 200 km) tem se tornado uma opção lucrativa para produtores e clientes. Todavia, a escolha correta do refratário de revestimento do cadinho não é uma tarefa trivial, pois uma série de propriedades deve ser considerada de modo a maximizar seu desempenho. Com isso, um estudo teórico envolvendo termodinâmica, microestrutura, resistência termomecânica, propriedades térmicas e projeto torna-se necessário. Neste trabalho, procura-se conciliar essa teoria com a prática industrial por meio da caracterização de materiais comerciais e a simulação computacional em um software desenvolvido, sendo possível a previsão do comportamento de um cadinho durante sua operação. A partir do acesso a informações da empresa parceira deste estudo, foi possível o acompanhamento industrial obtendo-se maior detalhamento sobre as reais necessidades de um projeto de revestimento de cadinhos. Portanto, suportado por três pilares "teoria", "simulação" e "prática industrial", o presente trabalho tem o intuito de ser uma contribuição tecnológica no auxílio à seleção de refratários para revestimento de cadinhos no transporte do alumínio líquido.

Among the technologies developed for aluminum industries, the long distance (over 100 to 200 km) transportation of molten aluminum (over 8 to 10 t) in crucibles has become into an advantageous process for suppliers and customers. However, choosing crucible's lining is not an obvious task, because the materials properties must be considered to maximize performance. Thus, a systemic analysis involving design, thermodynamic, microstructure, thermal conduction and thermo-mechanical factors is required. This work aims to match these theoretical aspects, the industrial results, the laboratory characterization of materials and the computing simulations using a developed software. This software is able to predict the thermal behavior of the heated containers even under operation. Therefore, the three pillars named "theory", "simulation" and "industrial results" used in the present work were applied in the selection of the refractory lining for the molten aluminum transportation crucible.