This study demonstrated the utility of real-time electrical impedance, utilizing the xCELLigence system to assess the cytotoxic effects of silver nanoparticles (AgNPs) and hydroxyapatite nanoparticles (HANPs) on A549 cells. Method validation confirmed the accuracy and reliability of cell index (CI) measurements. The NPs were thoroughly characterized to confirm their elemental composition, size, and morphology through energy dispersive spectroscopy, transmission electron microscopy, and dynamic light scattering. Cytotoxicity assays revealed a concentration-dependent response. Exposure to AgNPs resulted in a significant change in CI, with a pronounced increase followed by a sharp decrease in the first few hours after treatment at the highest concentration of 50 μg mL-1. This pattern suggested an initial cell response to AgNPs exposure, possibly indicating mechanisms such as apoptosis or necrosis, followed by a decrease in cell adhesion. Conversely, HANPs demonstrated a tendency to restore CI at higher concentrations (1-100 μg mL-1) before 48 h, suggesting a potential recovery in cell proliferation capacity. This underscores the diverse cell responses to NPs, emphasizing the sensitivity of the method in detecting subtle cytotoxic effects. These findings highlight the efficacy of real-time electrical impedance in dynamic nanoparticle cytotoxicity assessments, surpassing traditional assays. Adapting to high-throughput screening enhances nanomaterial safety evaluations. realtime real time (AgNPs (HANPs A A54 cells (CI measurements composition size spectroscopy microscopy scattering concentrationdependent dependent 5 mL1. mL1 mL 1. 1 mL-1 exposure necrosis adhesion Conversely 1100 100 (1-10 4 h capacity assessments highthroughput high throughput evaluations A5 mL- 110 10 (1-1 11 (1- (1 (

Resumo Esta série de casos relata uma técnica de túnel modificada com enxerto de tecido conjuntivo para o recobrimento radicular de múltiplas recessões gengivais Classe I, II e III de Miller. A abordagem modificada apresenta uma técnica de sutura inovadora para melhorar a estabilidade e a posição do enxerto. Dez pacientes com múltiplas recessões gengivais (n=85 dentes) receberam tratamento cirúrgico de recobrimento radicular. A altura e a largura da recessão gengival foram mensuradas e apresentadas como valores medianos, mínimos e máximos. A eficácia do tratamento foi expressa como uma porcentagem da cobertura radicular após pelo menos 12 meses. O teste de Shapiro-Wilk avaliou a normalidade; o teste de Wilcoxon pared determinou o valor P exato para as diferenças entre a altura da recessão gengival antes e após o tratamento cirúrgico (α = 0,05). Uma média de 97,9% (± 5,6%, p < 0,0001) de cobertura radicular após o tratamento ocorreu, e 73 das 85 recessões apresentaram cobertura radicular completa após 12 meses. O tratamento das recessões gengivais classe I e II de Miller resultou em recobrimento radicular superior a 99 e classe III superior a 95% (p < 0,0001). A série de casos apresentada relata a eficácia de uma técnica cirúrgica modificada promovendo mais de 95% de cobertura radicular após 12 meses em múltiplas recessões gengivais Classe I, II e III de Miller. Ensaios controlados randomizados cegos bem desenhados são necessários para validar a técnica proposta. n=85 n85 n (n=8 dentes medianos máximos 1 ShapiroWilk Shapiro Wilk normalidade α 0,05. 005 0,05 . 0 05 0,05) 979 97 9 97,9 ± ( 56 5 6 5,6% 0,0001 00001 0001 ocorreu 7 8 95 0,0001. proposta n=8 n8 (n= 00 0,0 97, 5,6 0,000 0000 000 n= (n 0, 5, 0,00

Abstract This case series reports a modified tunnel technique with connective tissue graft for the root coverage of multiple Miller Class I, II, and III gingival recessions. The modified approach presents an innovative suture technique to improve the stability and position of the graft. Ten patients with multiple gingival recessions (n=85 teeth) received surgical root coverage treatment. The gingival recession height and width were measured and presented as median, minimum, and maximum values. The percentage of the root coverage after at least 12 months expressed the treatment effectiveness. The Shapiro-Wilk test evaluated the normality; pared Wilcoxon test determined the exact P-value for the differences in the height of the gingival recession before and after surgical treatment (α = 0.05). An average of 97.9% (± 5.6%, p < 0.0001) root coverage after treatment occurred, and 73 out of 85 recessions presented complete root coverage after 12 months. Treatment of Miller class I and II gingival recessions resulted in root coverage higher than 99 and class III higher than 95% (p < 0.0001). The presented case series report the efficacy of a modified surgical technique promoting more than 95% of root coverage after 12 months in multiple Miller Class I, II, and III gingival recessions. Well-designed blind randomized controlled trials are needed to validate the proposed technique. n=85 n85 n (n=8 teeth median minimum values 1 effectiveness ShapiroWilk Shapiro Wilk normality Pvalue P value α 0.05. 005 0.05 . 0 05 0.05) 979 97 9 97.9 ± ( 56 5 6 5.6% 0.0001 00001 0001 occurred 7 8 95 0.0001. Welldesigned Well designed n=8 n8 (n= 00 0.0 97. 5.6 0.000 0000 000 n= (n 0. 5. 0.00

Abstract The aim of this study was to obtain ionic quantification in periradicular medium after diffusion tests of the solution used inside root canals during the electrochemical dissolution of endodontic file fragments and the NiTi-containing dissolution product via an apical foramen. Thirty single-rooted extracted human teeth had root canals prepared and were attached to Eppendorf tubes filled with sterile saline. The samples were divided into 3 groups (n = 10) according to the solution used inside the root canal during the diffusion tests: Group 1: [NaF 12 g/L + NaCl 1 g/L]; Group 2: [NaF 12 g/L + NaCl 1 g/L + NiTi 0.50 g/L]; Group 3: [NaF 6 g/L + NaCl 0.5 g/L + NiTi 0.25 g/L]. The sample in each Eppendorf tube was then analyzed to assay the ionic quantification in periradicular medium. The groups were compared in relation to ionic quantifications (Kruskal-Wallis and Dunn’s tests, p ≤ 0.05). Group 2 showed significantly higher F-, Ni and Ti quantities than groups 1 and 3 (p < 0.05). Group 3 showed significantly higher Ti and Ni quantities than group 1, where no measurable quantities of Ti and Ni were observed (p < 0.05). The conclusions were that a 50% dilution of the NiTi-containing dissolution product resulted in significantly lower F-, Ni and Ti quantities compared to the undiluted product. The quantifications observed here suggest that irrigation is recommendable during the electrochemical dissolution process to reduce the resultant ion concentrations in both the root canal and the periradicular medium.

Abstract Cone-beam computed tomography (CBCT) is an essential imaging method that increases the accuracy of diagnoses, planning and follow-up of endodontic complex cases. Image postprocessing and subsequent visualization relies on software for three-dimensional navigation, and application of indexation tools to provide clinically useful information according to a set of volumetric data. Image postprocessing has a crucial impact on diagnostic quality and various techniques have been employed on computed tomography (CT) and magnetic resonance imaging (MRI) data sets. These include: multiplanar reformations (MPR), maximum intensity projection (MIP) and volume rendering (VR). A recent advance in 3D data visualization is the new cinematic rendering reconstruction method, a technique that generates photorealistic 3D images from conventional CT and MRI data. This review discusses the importance of CBCT cinematic rendering for clinical decision-making, teaching, and research in Endodontics, and a presents series of cases that illustrate the diagnostic value of 3D cinematic rendering in clinical care.

Resumo Muitos estudos objetivaram desenvolver biomateriais terapêuticos alternativos para o reparo ósseo. O objetivo desta revisão sistemática foi avaliar o efeito da estatina carreada por fosfato de cálcio na formação e regeneração de tecido ósseo em modelos animais quando comparado com outros biomateriais ou coágulo. Esta revisão sistemática seguiu as recomendações do Cochrane Handbook for Systematic Reviews of Interventions, PRISMA guidelines, e o Preclinical Systematic Review & Meta-analysis Facility (SyRF). O protocolo desta revisão sistemática foi registrado no PROSPERO (CRD42018091112) e no CAMARADES. Além disso, o guia ARRIVE foi utilizado com o objetivo de aumentar a qualidade e transparência do estudo. Uma pesquisa eletrônica foi realizada através do MEDLINE/PubMed, Scopus, SciELO, e biblioteca do PROSPERO. Os autores utilizaram uma estratégia de busca específica para cada base de dados, e uma busca foi conduzida na literatura cinza e nas referências dos artigos selecionados. Os critérios de elegibilidade foram estudos em animais, os quais avaliaram o repara do ósseo tratado com fosfato de cálcio como carreador de estatina. O processo de seleção obteve 8 estudos dos 657 encontrados. Todos os estudos concluíram que a aplicação local da sinvastatina carreada pelo fosfato de cálcio é biocompatível, melhora o reparo ósseo e induz uma formação óssea significantemente maior que coágulo ou fosfato de cálcio sozinho. Em conclusão, os estudos pré-clínicos pertinentes evidenciaram a biocompatibilidade do fosfato de cálcio e sua eficácia na entrega do SIM para melhorar o reparo de defeitos ósseos. Assim, estudos clínicos são encorajados a investigar o impacto do SIM associado ao enxerto ósseo de fosfato de cálcio na reparação de defeito ósseo em humanos.

Abstract Several studies have aimed to develop alternative therapeutic biomaterials for bone repair. The purpose of this systematic review was to evaluate how statins carried by calcium phosphate affect the formation and regeneration of bone tissue in animal models when compared to other biomaterials or spontaneous healing. This systematic review followed the recommendations of the Cochrane Handbook for Systematic Reviews of Interventions, the PRISMA guidelines, and the Preclinical Systematic Review & Meta-analysis Facility (SyRF). The protocol of this systematic review was registered in PROSPERO (CRD42018091112) and in CAMARADES. In addition, ARRIVE checklists were followed in order to increase the quality and transparency of the search. An electronic search was performed using the MEDLINE/PubMed, Scopus, SciELO, and PROSPERO library databases. The authors used a specific search strategy for each database, and they also conducted a search in the grey literature and cross-references. The eligibility criteria were animal studies, which evaluated bone repair treated with calcium phosphate as a simvastatin carrier. The selection process yielded 8 studies from the 657 retrieved. All manuscripts concluded that locally applied simvastatin carried by calcium phosphate is biocompatible, enhanced bone repair and induced statistically greater bone formation than cloth or calcium phosphate alone. In conclusion, the pertinent pre-clinical studies evidenced the calcium phosphate biocompatibility and its effectiveness in delivering SIM to improve the repair of bone defects. So, clinical trials are encouraged to investigate the impact of SIM associated with calcium phosphate bone graft in repairing bone defect in humans.

Resumo Este estudo discute um método para determinar a dimensão anatômica do canal radicular usando o software e-Vol DX. A metodologia consiste em inicialmente estabelecer as posições corretas que serão medidas, definir o ponto na borda da estrutura anatômica e ajustar a posição intermediária na escala de cinza na imagem em tomografia computadorizada de feixe cônico (TCFC). A seguir, slices finos (0,10mm) são obtidos a partir de cortes 3D reconstruídos no filtro para as medidas, a fim de determinar a borda da superfície anatômica no plano axial. Uma replicação de posições no modo 3D é feita em reconstrução multiplanar (MPR) em imagens de TCFC, onde a posição correta é estabelecida com o auxílio de um guia de posicionamento. A densidade 3D é ajustada de modo a ficar na mesma dimensão da imagem 2D, e então realiza-se uma calibração de dimensão até o ponto em que há uma coincidência entre o modo 3D e 2D. Essa calibração é feita apenas no início da medição. Posteriormente, a posição intermediária da divisão entre a escala de cinza é verificada na TCFC. Uma vez que um lado tenha sido concluído, o guia é movido para o outro lado, e segue-se as mesmas diretrizes descritas. Define-se a posição do marcador na outra margem, sendo que o modo 2D usado como referência. Assim, obtém-se a medida necessária, sendo verificado nas duas margens do canal radicular. A criação deste filtro no software e-Vol DX para medição e seu uso apropriado permite aplicações eficazes quando se deseja obter diâmetros de estruturas anatômicas.

Abstract This study discusses a method to determine the root canal anatomic dimension by using e-Vol DX software. The methodology consists in initially establishes the correct positions which will be measured, define the point on the edge of the anatomical structure, and next adjust the intermediate position in the grayscale of CBCT image. Afterward, thin sections (0.10 mm) are obtained from 3D reconstructed slices in the filter for the measurements, in order to determine the edge of the anatomical surface in the axial plane. A replication of positions in 3D mode is done in multiplanar reconstruction (MPR) of CBCT images, where the correct position is established with the aid of a positioning guide. The 3D density is adjusted so that it is in the same dimension as the 2D image, and a dimension calibration occurs to the point where there is a coincidence between 3D and 2D. This calibration is done only at the beginning of the measurement. Next, the intermediate position of the division between the grayscale is verified in the CBCT scan. Once one side has been completed, it is moved to the other side and follows the same guidelines described above. When setting the position of the courses in the other margin, being that 2D mode is used as reference. Thus, one obtains the required measure, being checked in the two points. The creation of this filter in the e-Vol DX software for measurement, and its appropriate management, allows more effective applications when it is desired to obtain diameters of anatomical structures.

Resumo Este estudo avaliou comparativamente duas configurações (pó e massa) de um biomaterial composto com base de PLGA (Poli(láctico-co-glicólico)/hidroxiapatita em nanoescala (ReOss®, Intra-Lock International) através da morfologia microscópica, citotoxicidade in vitro, biocompatibilidade e resposta in vivo como substituto ósseo. MEV e EDS caracterizaram os biomateriais antes/após o enxerto. A citocompatibilidade foi avaliada em pré-osteoblastos murinos. A osteocondutividade e a biocompatibilidade foram avaliadas em coelhos Branco da Nova Zelândia. Ambas as configurações foram implantadas na calvária de dezoito animais em defeitos não-críticos, com coágulo sanguíneo como grupo controle. Após 30, 60 e 90 dias, os animais foram eutanasiados e os fragmentos contendo os biomateriais e controles coletados. Blocos ósseos foram embebidos em parafina (n=15) destinados às análises histológica e histomorfométrica, e em resina (n=3) destinadas à MEV e EDS. Antes da implantação, a configuração massa mostrou ambas fases morfológicas porosa e fibrosa. O pó revelou partículas porosas com granulometria variável. EDS mostrou cálcio, carbono e oxigênio na configuração massa, enquanto o pó mostrou também fósforo. Após a implantação a EDS revelou cálcio, carbono e oxigênio em ambas configurações. Os materiais foram considerados citotóxicos pelo teste XTT. A análise histológica mostrou nova formação óssea e nenhuma reação inflamatória nos sítios de implante. Entretanto, a análise histomorfométrica indicou que a quantidade de osso neoformado não foi estatisticamente diferente entre os grupos experimentais. Embora ambos os materiais tenham apresentado citotoxicidade in vitro, foram biocompatíveis e osteocondutores. A configuração do ReOss® afetou as características morfológicas e a citocompatibilidade in vitro, porém não impactou a resposta biológica in vivo, como medido pelo presente modelo.

Article This study evaluated comparatively two configurations (powder and putty) of a composite biomaterial based on PLGA (Poly(lactide-co-glycolide)/nanoescale hydroxyapatite (ReOss®, Intra-Lock International) through microscopic morphology, in vitro cytotoxicity, biocompatibility and in vivo response as a bone substitute. SEM and EDS characterized the biomaterials before/after grafting. Cytocompatibility was assessed with murine pre-osteoblasts. Osteoconductivity and biocompatibility were evaluated in White New Zealand rabbits. Both configurations were implanted in the calvaria of eighteen animals in non-critical size defects, with blood clot as the control group. After 30, 60 and 90 days, the animals were euthanized and the fragments containing the biomaterials and controls were harvested. Bone blocks were embedded in paraffin (n=15) aiming at histological and histomorphometric analysis, and in resin (n=3) aiming at SEM and EDS. Before implantation, the putty configuration showed both a porous and a fibrous morphological phase. Powder revealed porous particles with variable granulometry. EDS showed calcium, carbon, and oxygen in putty configuration, while powder also showed phosphorus. After implantation EDS revealed calcium, carbon, and oxygen in both configurations. The materials were considered cytotoxic by the XTT test. Histological analysis showed new bone formation and no inflammatory reaction at implant sites. However, the histomorphometric analysis indicated that the amount of newly formed bone was not statistically different between experimental groups. Although both materials presented in vitro cytotoxicity, they were biocompatible and osteoconductive. The configuration of ReOss® affected morphological characteristics and the in vitro cytocompatibility but did not impact on the in vivo biological response, as measured by the present model.

Resumo A história de periodontite crônica (CP) é um fator de risco para falhas na osseointegração. O sistema de osteoclastogênese (RANK, RANKL e OPG) é crucial para o controle da homeostase óssea. O objetivo deste estudo foi investigar os níveis de OPG e RANKL no tecido peri-implantar de voluntários com e sem histórico de CP e sua associação com inflamação da mucosa. Este é um estudo tipo caso-controle. O exame para diagnóstico de CP e na região peri-implantar foi realizado em 46 voluntários, divididos em controle (sem história CP, n=26) e grupo CP (com histórico de CP, n=20). Descartes gengivais foram obtidos durante a exposição do implante. PCR quantitativo avaliou a expressão do RNAm de OPG/RANKL. As proteínas OPG e RANKL foram analisadas por western blot e imunohistoquímica. O teste do qui-quadrado analisou a significância entre as variáveis nominais enquanto as variáveis contínuas foram analisadas pelo teste-t e Mann-Whitney, após o teste de Shapiro-wilk. O método do Livak 2--ΔΔCT avaliou a expressão gênica. Os voluntários com CP apresentaram 23 vezes mais chances de desenvolver inflamação da mucosa. Expressão elevada no RNAm de RANKL (p=0.04) e RANKL/OPG (p=0.001) foram observadas no grupo CP. Voluntários com CP mostraram aumento dos níveis da proteína RANKL em contraste com diminuída expressão de OPG. Mesmo sem periodontite ativa, voluntários com histórico de CP apresentaram elevado nível gengival de RANKL/OPG e alta correlação com inflamação peri-implantar e perda do implante.

Abstract tHistory of chronic periodontitis (CP) is a risk factor for oseointegration failure. The osteoclastogenesis system (RANK, RANKL and OPG) is critical for bone homeostatic control. We investigated the levels of OPG and RANKL in peri-implant tissues from volunteers with and without a history of CP and their association with mucosae inflammation. This is a single-blind case-contro study. Diagnosis of a history of CP and peri-implant examination was performed on 46 volunteers, divided into control (without history of CP, n=26) and CP group (with history of CP, n=20). Gingival biopsies were harvested during implant exposure. Quantitative PCR evaluated OPG/RANKL mRNA expressions. OPG and RANKL proteins were analyzed by western blot and immunohistochemistry assay. The chi-square test analyzed the significance of nominal variables between groups while continuous variables were analyzed by T-test or Mann-Whitney test, after Shapiro-Wilk test evaluation. The 2-ΔΔCT Livak method calculation evaluated the gene expression. Values of p<0.05 were considered statistically significant. Volunteers with CP history had 23 times higher chance of developing mucosae inflammation. High mucosae levels of RANKL (p=0.04) and RANKL/OPG (p=0.001) mRNA expressions were observed in CP group. CP volunteers showed increased RANKL protein levels in opposition to decreased OPG expression. Even without active periodontitis, volunteers with a history of CP had elevated gingival levels of RANKL/OPG and higher correlation with peri-implant mucosae inflammation and implant loss.

Abstract Objectives To evaluate the association between hypoxia during embryo development and oral clefts in an animal model, and to evaluate the association between polymorphisms in the HIF-1A gene with oral clefts in human families. Material and Methods The study with the animal model used zebrafish embryos at 8 hours post-fertilization submitted to 30% and 50% hypoxia for 24 hours. At 5 days post-fertilization, the larvae were fixed. The cartilage structures were stained to evaluate craniofacial phenotypes. The family-based association study included 148 Brazilian nuclear families with oral clefts. The association between the genetic polymorphisms rs2301113 and rs2057482 in HIF-1A with oral clefts was tested. We used real time PCR genotyping approach. ANOVA with Tukey's post-test was used to compare means. The transmission/disequilibrium test was used to analyze the distortion of the inheritance of alleles from parents to their affected offspring. Results For the hypoxic animal model, the anterior portion of the ethmoid plate presented a gap in the anterior edge, forming a cleft. The hypoxia level was associated with the severity of the phenotype (p<0.0001). For the families, there was no under-transmitted allele among the affected progeny (p>0.05). Conclusion Hypoxia is involved in the oral cleft etiology, however, polymorphisms in HIF-1A are not associated with oral clefts in humans.

ABSTRACT Objective: This study aimed to evaluate bone repair in rat dental sockets after implanting nanostructured carbonated hydroxyapatite/sodium alginate (CHA) and nanostructured carbonated hydroxyapatite/sodium alginate containing 5% strontium microspheres (SrCHA) as bone substitute materials. Methods: Twenty male Wistar rats were randomly divided into two experimental groups: CHA and SrCHA (n=5/period/group). After one and 6 weeks of extraction of the right maxillary central incisor and biomaterial implantation, 5 μm bone blocks were obtained for histomorphometric evaluation. The parameters evaluated were remaining biomaterial, loose connective tissue and newly formed bone in a standard area. Statistical analysis was performed by Mann-Withney and and Wilcoxon tests at 95% level of significance. Results: The histomorphometric results showed that the microspheres showed similar fragmentation and bio-absorbation (p>0.05). We observed the formation of new bones in both groups during the same experimental periods; however, the new bone formation differed significantly between the weeks 1 and 6 (p=0.0039) in both groups. Conclusion: The CHA and SrCHA biomaterials were biocompatible, osteoconductive and bioabsorbable, indicating their great potential for clinical use as bone substitutes.

Resumo O objetivo deste estudo foi avaliar a osseointegração precoce de duas superficies diferentes de implantes, uma superfície tratada com jateamento e ataque ácido (TN) comparada com outra superfície com a mesma geometria e rugosidade e modificada com hidrofilicidade / molhabilidade através do condicionamento em solução isotônica de 0,9% de cloreto de sódio (TA) através de análises histológica e histomorfométrica após a implantação em tíbia de ovelhas. Quarenta implantes dentários, divididos em dois grupos (TN e TA), foram implantados na tíbia esquerda de vinte ovelhas Santa Inês (n=5/período experimental) saudáveis e esqueleticamente maduras. Após 7, 14, 21 e 28 dias pós-implantação, as amostras foram coletadas e as ovelhas foram mantidas vivas. A análise dos cortes em resina (30 μm) permitiu a quantificação da área de osso (BA) e do contato osso-implante (BIC). O grupo TA apresentou aumento de quase 50% na BA aos 14 dias (p <0,001, ANOVA - pós teste de Tukey) em comparação com 7 dias. O grupo TA apresentou valores maiores do que o TN para BA e BIC aos 14, 21 e 28 dias após a implantação, estabilizando a cicatrização óssea. A superfície hidrofílica TA promoveu uma osseointegração precoce aos 14 e 21 dias em relação à TN, acelerando o período de cicatrização óssea após a instalação dos implantes em tíbias de ovelha.

Abstract The objective of this study was to evaluate the early osseointegration of two different implants surfaces, a sandblasted and acid-etched surface (TN) compared with same geometry and surface roughness modified to be hydrophilic/wettable by conditioning in an isotonic solution of 0.9% sodium-chloride (TA) through histological and histomorphometric analysis after sheep tibia implantation. Forty dental implants, divided in two groups (TN and TA) were placed in the left tibia of twenty healthy, skeletally mature Santa Ines sheep (n=5/experimental period). After 7, 14, 21 and 28 days post-implantation, the samples were removed and the sheep were kept alive. Analysis of resin sections (30 μm) allowed the quantification of bone area (BA) and bone-to-implant contact (BIC). TA group presented nearly 50% increase in BA at 14 days (p<0.001, ANOVA - Tukey’s post test) compared with 7 days. The TA presented higher values than the TN for BA and BIC at 14, 21, and 28 days after placement, stabilizing bone healing. TA hydrophilic surface promoted early osseointegration at 14 and 21 days compared to TN, accelerating bone healing period post-implant placement in sheep tibia.

Resumo A mordida aberta anterior apresenta uma etiologia multifatorial causada pela interação entre hábitos de sucção e fatores genéticos. O objetivo deste estudo foi avaliar a associação entre mordida aberta anterior e polimorfismo nos genes que codificam as metaloproteinases da matriz (MMPs) e seus inibidores teciduais (TIMPs). Foram avaliadas 472 crianças que apresentvam pelo menos um hábito de sucção. As crianças foram clinicamente examinadas para avaliar a presença de mordida aberta anterior. DNA genômico foi extraído da saliva. A genotipagem dos polimorfismos selecionados em MMP2, MMP3, MMP9, TIMP1 e TIMP2 foi realizada por PCR em tempo real, usando o método de TaqMan. As frequências alélicas e genotípicas foram comparadas entre os grupos com e sem mordida aberta anterior usando o software PLINK®. Duzentas e dezenove crianças apresentavam mordida aberta anterior enquanto 253 não a apresentavam. O polimorfismo rs17576 em MMP9 estava significativamente associado com mordida aberta anterior (p=0,009). No modelo recessivo (GG versus AG+AA) o genótipo GG foi um fator protetor para mordida aberta anterior (p=0,014; OR 4,6; 95%CI 1,3- 16,2). Concluindo, o polimorfismo rs17576 (substituição de glutamina por arginina) em MMP9 está associado com mordida aberta anterior. Os resultados obtidos suportam a hipótese de que fatores genéticos estão envolvidos com a etiologia da mordida aberta anterior.

Abstract Anterior open bite (AOB) has a multifactorial etiology caused by the interaction of sucking habits and genetic factors. The aim of this study was to evaluate the association between AOB and polymorphisms in genes that encode Matrix metalloproteinases (MMPs) and their tissue inhibitors (TIMPs). Four hundred and seventy-two children that presented at least one sucking habit were evaluated. Children were examined clinically for the presence of AOB. Genomic DNA was extracted from saliva. Genotyping of the selected polymorphisms in MMP2, MMP3, MMP9, TIMP1 and TIMP2 was carried out by real-time PCR using the TaqMan method. Allele and genotype frequencies were compared between the groups with and without AOB using the PLINK® software in a free and in a recessive model using a chi-square test. Logistic regression analysis was implemented (p≤0.05). Two hundred nineteen children had AOB while 253 did not. The polymorphism rs17576 in MMP9 was significantly associated with AOB (p=0.009). In a recessive model GG genotype was a protective factor for AOB (p=0.014; OR 4.6, 95%CI 1.3-16.2). In the logistic regression analysis, none of the genes was associated with AOB. In conclusion, the polymorphism rs17576 (glutamine for arginine substitution) in MMP9 was a protective factor for AOB.

Resumo O objetivo deste estudo foi caracterizar físico-químicamente e avaliar o reparo ósseo de discos de hidroxiapatita porosa contendo zinco após a implantação em calvária de coelhos (nZnHA). O pó de nZnHA e o pó hidroxiapatita porosa estequiométrica nanoestruturada (controle - nHA) foram confeccionados em discos (8 mm) e calcinados a 550˚C. Dois defeitos cirúrgicos foram criados na calvária de seis coelhos para a implantação dos discos. Após 12 semanas, os animais foram eutanasiados e as áreas enxertadas foram removidas, fixadas em formol a 10% e embebidas em parafina (n=10) para avaliação histomorfométrica. Além disso, uma amostra de cada grupo (n=2) foi embebida em metilmetacrilato para análise de MEV e EDS. O tratamento térmico dos discos de nZnHA transformou-os em implantes bifásicos compostos por HA contendo Zinco e β fosfato tricálcico com Zinco (ZnHA/βZnTCP). Os discos de nHA, apresentaram-se altamente cristalinos e com baixa solubilidade quando comparados aos discos de ZnHA. A análise histológica revelou que ambos os materiais foram biologicamente compatíveis e promoveram a osteocondução. As análises de FRX e MEV-EDS confirmaram a presença do zinco nas amostras de nZnHA. A avaliação histomorfométrica revelou a presença de neoformação óssea em ambos os grupos, porém sem diferenças estatísticas entre eles, com base no teste de Wilcoxon (p>0,05). O presente estudo confirmou que ambos os biomateriais otimizaram o reparo ósseo, foram biocompatíveis e osseocondutivos e a presença do zinco não favoreceu o reparo ósseo. Estudos adicionais in vivo devem ser conduzidos a fim de investigar o efeito de maiores concentrações de zinco.

Abstract The aim of this study was to characterize the physico-chemical properties and bone repair after implantation of zinc-containing nanostructured porous hydroxyapatite scaffold (nZnHA) in rabbits' calvaria. nZnHA powder containing 2% wt/wt zinc and stoichiometric nanostructured porous hydroxyapatite (nHA - control group) were shaped into disc (8 mm) and calcined at 550 °C. Two surgical defects were created in the calvaria of six rabbits (nZnHA and nHA). After 12 weeks, the animals were euthanized and the grafted area was removed, fixed in 10% formalin with 0.1 M phosphate buffered saline and embedded in paraffin (n=10) for histomorphometric evaluation. In addition, one sample from each group (n=2) was embedded in methylmethacrylate for the SEM and EDS analyses. The thermal treatment transformed the nZnHA disc into a biphasic implant composed of Zn-containing HA and Zn-containing β-tricalcium phosphate (ZnHA/βZnTCP). The XRD patterns for the nHA disc were highly crystalline compared to the ZnHA disc. Histological analysis revealed that both materials were biologically compatible and promoted osteoconduction. X-ray fluorescence and MEV-EDS of nZnHA confirmed zinc in the samples. Histomorphometric evaluation revealed the presence of new bone formation in both frameworks but without statistically significant differences (p>0.05), based on the Wilcoxon test. The current study confirmed that both biomaterials improve bone repair, are biocompatible and osteoconductive, and that zinc (2wt%) did not increase the bone repair. Additional in vivo studies are required to investigate the effect of doping hydroxyapatite with a higher Zn concentration.

Resumo Apesar do alto índice de sucesso em implantodontia, falhas tem aumentado drasticamente, estando associadas ao desenvolvimento de peri-implantite. A perda óssea peri-implantar é influenciada por múltiplos fatores, incluindo causas genéticas e ambientais. As BMPs (proteínas ósseas morfogenéticas) são fatores de crescimento indutores da formação óssea. Os FGFs (fatores de crescimento dos fibroblastos) e seus receptores (FGFRs) desenvolvem importante função na proliferação, diferenciação e migração celular. A relação BMP/FGF é responsável pela regeneração e perda óssea. O objetivo deste estudo foi estudar a possível correlação entre os genes BMP4, FGF3, FGF10 e FGFR1 e a perda óssea peri-implantar. Duzentos e quinze voluntários, com 754 implantes, foram submetidos ao exame oral e divididos em grupo saúde (n=129) e peri-implantite (n=86). Treze polimorfismos nos genes BMP4, FGF3, FGF10 e FGFR1 foram analisados individualmente e como haplótipos. O teste do qui-quadrado correlacionou as frequências dos genótipos, alelos e haplótipos. Valores de p<0,05 foram considerados estatisticamente significantes. Voluntários com peri-implantite mostraram alta incidência de edentulismo total (p<0,0001) e biotipo periodontal fino (p<0,04). Sangramento espontâneo, placa e mobilidade do implante foram altamente incidentes no grupo peri-implantite (p<0,0001). O genótipo polimórfico TT para BMP4 rs2761884 foi associado com saúde peri-implantar (p=0,01). FGF3 rs4631909 (genótipos TT+CT) mostraram associação com o grupo controle (p=0,04). A frequência do alelo C para FGF3 rs4631909 mostrou uma tendência de associação com peri-implantite (p=0,08). Os haplótipos FGF10 CCTG (p=0,03), BMP4 GAAA (p=0,05) e GGGA (p=0,02) foram associados com peri-implantite (p=0,03). Sendo assim, conclui-se que os haplótipos BMP4 e FGF10 estão associados com peri-implantite.

Abstract Despite the success of osseointegrated implants, failures have increased significantly, associated with development of peri-implantitis. Multiple factors influence the peri-implant bone loss, including environmental and genetic causes. BMPs (Bone morphogenetic proteins) are growth factors that induce bone formation. FGF (fibroblast growth factors) and their receptors (FGFRs) play important roles by controlling the levels of cell proliferation, differentiation and migration. BMP/FGF relationship is responsible for promoting bone regeneration and bone loss. The aim of this study was to analyze the correlation between BMP4, FGF3, FGF10 and FGFR1 genes and peri-implant bone loss. Two hundred and fifteen volunteers, with 754 dental implants, were submitted to oral examination and divided in healthy group (n=129) and peri-implantitis group (n=86). Thirteen polymorphisms in BMP4, FGF3, FGF10 and FGFR1 genes were analyzed individually and in haplotype. The chi-square test correlated genotypes, allelic and haplotype frequencies. Values of p<0.05 were considered significant. Volunteers with peri-implantitis demonstrated high incidence of total edentulism (p<0.0001) and thin peri-implant phenotype (p<0.04). Higher incidence of spontaneous bleeding, plaque and implant mobility was observed in peri-implantitis group (p<0.0001 for all). The TT polymorphic genotype for BMP4 rs2761884 was associated with healthy peri-implant (p=0.01). FGF3 rs4631909 (TT+CT genotype) also showed association with the control group (p=0.04). The frequency of C allele for FGF3 rs4631909 showed a tendency for association with peri-implantitis (p=0.08). FGF10 CCTG (p=0.03), BMP4 GAAA (p=0.05) and GGGA (p=0.02) haplotypes were associated with peri-implantitis (p=0.03). Therefore, it may be concluded that BMP4 and FGF10 haplotypes are associated with peri-implantitis.

Resumo O objetivo do presente estudo foi verificar os efeitos citotóxicos de longo prazo da MTA Fillapex e comparar com os do AH Plus. Solubilidade e pH também foram avaliados. Osteoblastos humanos foram incubados com elutos de amostras frescas de AH Plus e MTA Fillapex, e com elutos dos mesmos espécimes pelas 4 semanas seguintes. O pH foi avaliado a cada semana. Um ensaio multiparamétrico de viabilidade celular foi realizado. Para solubilidade foi utilizada metodologia ISO. Os resultados foram analisados por ANOVA, complementada com o pós-teste de Tukey (p<0,05). Nenhuma diferença significativa foi encontrada entre os materiais frescos quando avaliados em relação a citotoxicidade (p>0,05). Depois de uma semana, o AH Plus tornou-se não-citotóxico em todos os três parâmetros avaliados. Por outro lado, MTA Fillapex permaneceu citotóxico durante todo o período experimental (p<0,05). A solubilidade do AH Plus foi significativamente menor do MTA Fillapex para todos os períodos avaliados (p>0,05). O pH da AH Plus foi significativamente menor do que o MTA Fillapex na segunda e na terceira semana (p<0,05). Nos outros períodos testados não houve diferença estatística. Em conclusão, o MTA Fillapex permaneceu citotóxico após 4 semanas e a sua citotoxicidade pode estar relacionada à elevada solubilidade deste material.

Abstract The aim of the present study was to verify the long-term cytotoxic effects of the MTA Fillapex and to compare them with AH Plus. Dissolution rate and pH were also evaluated. Human osteoblast cells were incubated with elutes of fresh specimens from AH Plus and MTA Fillapex, and with elutes of the same specimens for 4 successive weeks. Elute's pH was evaluated at each time point. A multiparametric cell viability assay was performed. For dissolution rate, ISO methodology was used. The results were analyzed by one-way analysis of variance, complemented with the Tukey post-test (p<0.05). No significant difference was found among the materials when fresh mixed (p>0.05). After 1 week, AH Plus became non-cytotoxic on all three evaluated parameters. Conversely, MTA Fillapex remained severely and mildly cytotoxic over the entire experimental period (p<0.05). The dissolution rate of AH Plus was significantly lower than MTA Fillapex at all time points (p>0.05). The pH of AH Plus was significantly lower than MTA Fillapex at the second and third week (p<0.05). In the other tested time points no statistical difference was observed. In conclusion, MTA Fillapex remained cytotoxic after 4 weeks and its cytotoxicity may be related to the high dissolution rate of this material.