Abstract Building structures made of cast-in-place reinforced concrete use timber for formwork, struts, scaffolding, safety elements, and temporary construction site structures, which characterize the underutilization of biomaterial in a function of short life cycles and low added value. This work aims to survey timber consumption for temporary purposes in high-rise buildings with reinforced concrete structures cast in loco. Secondary data obtained through a systematic and exploratory review of national and international articles on timber use, reuse, and disposal was used. For studies with primary data for vertical housing buildings, timber consumption per constructed area ranged from 0.002 to 0.054 m³/m². For studies with secondary data and high-rise buildings for different uses, wood consumption ranged from 0.002 to 0.077 m 3 /m 2 . There was variability in the results of 33 times (average), explained by the methods of quantification, applications, and reuse of the material.

Resumo Estruturas de edifícios em concreto armado moldado in loco utilizam madeira para fôrmas, escoras, andaimes, elementos de segurança e estruturas provisórias de canteiro, que caracterizam a subutilização do biomaterial em uma função de curto ciclo de vida e baixo valor agregado. O objetivo deste trabalho é levantar o consumo de madeira para fins provisórios em obras verticais com estrutura em concreto armado moldado in loco. Utilizou-se dados secundários obtidos por meio de uma revisão sistemática e exploratória de artigos nacionais e internacionais sobre uso, reuso e descarte da madeira. Para estudos com dados primários de edifícios habitacionais verticais o consumo de madeira por área construída foi de 0,002 a 0,054 m³/m². Para estudos com dados secundários e edifícios verticais de outros usos, o consumo de madeira foi de 0,002 a 0,077 m³/m². Houve variabilidade dos resultados de 33 vezes (média), explicada pelos métodos de quantificação, aplicações e reuso do material.

ABSTRACT The physical and microbiological characteristics of the soil are indicators considered in the assessment of the conditions of anthropized areas and are tools to identify levels of degradation, define the best crops, and thus, propose actions that help the producer to choose the appropriate soil management. In this regard, the aim of this work was to analyze the physical and microbiological properties of the soil in different agricultural production systems and in a preserved area. The research was carried out at a property located in the municipality of Campo Novo do Parecis - MT, Cerrado`s Biome. For the physical analysis, samples at depths of 0-0.10 m, 0.10-0.20 m and 0.20-0.30 m in five locations were collected randomly, within each production system and in the forest fragment. To evaluate the microbial activity of the soil, soil samples were collected at the 0-0.10 m layer also in five locations. All uses showed changes in physical characteristics, when compared to natural conditions. In the microbiological analysis, the integrated systems did not present significant differences in relation to the organic matter and the basal respiration of the soil when compared with the conventional systems and the forest fragment. The carbon of the microbial biomass of the soil and the metabolic quotient showed a difference between the systems of use and the preserved area.

RESUMO Introdução Em todo mundo os trabalhadores estão expostos a riscos no local de trabalho, podendo resultar em acidentes. Os hospitais são ambientes ricos em perigos e, por isso, com maior probabilidade de ocorrerem Acidentes de Trabalho com consequentes lesões músculo-esqueléticas ou com risco de transmissão de agentes biológicos. Objetivos Conhecer as caraterísticas dos acidentes em contexto laboral que ocorrem num Hospital Central. Ao descrever e analisar os mesmos, é possível fazer uma adequada avaliação de risco, permitindo no futuro adotar medidas preventivas que reduzam ou eliminem os perigos existentes em meio hospitalar. Materiais e métodos Estudo observacional, transversal, descritivo e analítico. Como instrumento de recolha foi utilizada uma base de dados existente no Serviço de Saúde Ocupacional de um Hospital Central, com informação relativa aos Profissionais de Saúde acidentados. Foram selecionados apenas os acidentes mecânicos ou com exposição a agentes biológicos. Foi testada a normalidade das distribuições e aplicados os testes do Qui Quadrado, Fisher ou Mann-Whitney, sendo considerado o nível de significância para rejeição da hipótese nula de 5%. Resultados Foram analisados um total de 265 Acidentes de Trabalho: 36.2% classificaram-se como mecânicos e os restantes como biológicos. Os grupos com maior número de sinistrados foram os Enfermeiros (49.4%) e com idades entre os 21 e os 30 anos (36.2%). De janeiro a março de 2021 registou-se o maior pico de acidentes (n=51) e o tempo mediano desde a admissão até a ocorrência de acidentes foi inferior nos que tiveram exposição a fluidos biológicos, comparativamente com os mecânicos. A atribuição de Incapacidade Temporária Absoluta aos sinistrados foi de 84.5%, destacando-se ainda que não existiram associações entre variáveis independentes e a atribuição de incapacidade temporária (absoluta ou parcial). Discussão e conclusões As características da população que sofreu Acidentes de Trabalho no Hospital Central em análise é idêntica à de outros estudos. Durante o pico de internamentos na pandemia COVID-19, o número de acidentes no Hospital aumentou, sugerindo que a pandemia e a elevada carga de trabalho associada podem ser uma possível causa. A elevada incidência de acidentes com exposição a fluidos biológicos, em profissionais com menos experiência, pode estar relacionada com a pouca destreza no manuseio de materiais e equipamentos e a elevada atribuição de Incapacidade Temporária Absoluta pode-se atribuir à baixa notificação de acidentes menos graves. Assim, o Serviço de Saúde Ocupacional deverá interceder junto dos Profissionais de Saúde para promover a notificação de acidentes, particularmente os menos graves que são frequentemente desvalorizados, permitindo tomar medidas para minimizar esses eventos. Será importante reforçar medidas preventivas que, considerando as características dos acidentes, poderão ser a utilização de equipamentos ou materiais para mobilização de cargas, utilização de calçado adequado, melhoria das infraestruturas do Hospital, sensibilização para os riscos existentes e, especialmente em acidentes com exposição a fluidos biológicos, formação para melhoria das capacidades técnicas dos profissionais no manuseio de materiais e equipamentos. Não foram identificados preditores para a existência de incapacidade temporária após Acidente de Trabalho, recomendam-se estudos com uma população-alvo maior, maior espaço temporal e, eventualmente, estudos longitudinais para identificar eventuais associações.

ABSTRACT Introduction All over the world, workers are exposed to hazards in the workplace, which can result in accidents. Hospitals are environments rich in dangers and, therefore, Work accidents are more likely to occur with subsequent musculoskeletal injuries, or risk of transmission of biological agents. Objectives To know the characteristics of accidents in the work context that occur in a Central Hospital. By describing and analyzing them, it is possible to make an adequate risk assessment, allowing in the future to adopt preventive measures that reduce or eliminate the existing dangers in the hospital environment. Materials and methods Observational, cross-sectional, descriptive and analytical study. As a data collection instrument, a database belonging to the Occupational Health Service of a Central Hospital, with information on injured Health Professionals, was used. Only mechanical accidents or those with exposure to biological fluids were selected. The normality of the distributions was tested and the Chi-Square, Fisher or Mann-Whitney tests were applied, considering the significance level for rejection of the null hypothesis of 5%. Results A total of 265 Work Accidents were analyzed, 36.2% mechanical and the remaining with exposure to biological fluids. The groups with the highest number of victims were the nurses (49.4%) and aged between 21 and 30 years (36.2%). Between January and March 2021 there was a peak in the number of accidents (n=51) and the median time from admission to the occurrence of the accident was lower in those who had exposure to biological fluids compared to mechanical ones. The attribution of Absolute Temporary Disability to the victims was 84.5%, highlighting that there were no associations between independent variables and the attribution of temporary disability (absolute or partial). Discussion and conclusions The characteristics of the population that suffered Work Accidents at the Central Hospital under analysis is identical to those of other studies. During the peak of hospitalizations in the COVID-19 pandemic, the number of accidents in the Hospital increased, suggesting that the pandemic and the associated high workload may be a possible cause. The high incidence of accidents with exposure to biological fluids, in professionals with less experience, may be related to the lack of dexterity in the handling of materials and equipment and the high attribution of Absolute Temporary Incapacity can be attributed to the low notification of less serious accidents. In this way, the Occupational Health Service should intercede with the Health Professionals to promote the notification of accidents, particularly the less serious ones that are often devalued, allowing to take measures to minimize these events. It will be important to strengthen preventive measures, which, considering the characteristics of accidents, may be the use of equipment or materials for the mobilization of loads, use of appropriate footwear, improvement of the Hospital's infrastructures, awareness of existing risks and, especially in accidents with exposure to biological fluids, training to improve the technical skills of professionals in the handling of materials and equipment. No predictors were identified for the existence of temporary disability after a Work Accident, studies with a larger target population, an increase in time span and, eventually, longitudinal studies to identify possible associations are recommended.

Abstract We studied the mineralization of the herbicide bentazon (Bn) through advanced electro-oxidation using a non-divided modified Diachem® cell. The treatment system consisted of an array of three boron-doped diamond (BDD) electrodes: cathode-anode-cathode. The chosen variables of interest were current density (j = 0.5, 1.0, and 1.5 mA cm-2), the initial Bn concentration (10, 50, and 100 mg L-1), and the volumetric flow (v = 280, 500, and 750 mL min-1). In all cases, a 0.04 M Na2SO4 and 0.05 M NaHSO4 (pH ~ 2) solution was used as the supporting electrolyte. Results indicate that, at low current densities, up to 86 % of the Bn present in the solution can be removed (j = 1.0 mA cm-2 and v = 500 mL min-1); however, additional increases in j (from 1.0 to 1.5 mA cm-2) slightly increase (2-3 %) the removal efficiency but increase 55 % the carbon footprint and the treatment cost. Likewise, increases in the volumetric flow from 500 to 750 mL min-1 marginally affect the elimination of Bn and the removal of total organic carbon (TOC) in 1% and 4 %, respectively. The highest efficiencies for TOC (68 %) and COD (82 %) removals were obtained with the following operational conditions: j = 1.0 mA cm-2 and v = 750 mL min-1. Values obtained for the instantaneous current efficiency (ICE) showed an exponential reduction, suggesting that mass transfer influences importantly the efficiency of the process.

Resumen En este trabajo se estudió la mineralización del herbicida bentazón (Bn) por medio de electroooxidación avanzada utilizando una celda no dividida Diachem® modificada. El sistema de tratamiento consta de un arreglo de tres electrodos de diamante dopado con boro (BDD): cátodo-ánodo-cátodo. Las variables de interés seleccionadas fueron: la densidad de corriente ( j = 0.5, 1.0 y 1.5 mA cm-2), la concentración inicial de Bn (10, 50 y 100 mg L-1) y el flujo volumétrico (v = 280, 500 y 750 mL min-1). En todos los casos se usó como electrolito soporte una solución de 0.04 M Na2SO4 y 0.05 M de NaHSO 4 (pH ~ 2). Los resultados obtenidos indican que, a bajas densidades de corriente, se puede remover hasta el 86 % del Bn presente en solución (j = 1.0 mA cm-2 y v = 500 mL min-1); sin embargo, aumentos adicionales en j (de 1.0 a 1.5 mA cm-2) elevan ligeramente la eficiencia de remoción (2-3 %) pero incrementan hasta en un 55% la huella de carbono y el costo de tratamiento. De igual forma, incrementos en el flujo volumétrico de 500 a 750 mL min-1 afectan de forma marginal la eliminación del Bn y la remoción del carbono orgánico total (TOC) en un 1 % y 4 %, respectivamente. Las mayores eficiencias de remoción de TOC (68 %) y COD (82 %) se obtuvieron con las siguientes condiciones operativas: j = 1.0 mA cm-2 y v = 750 mL min-1. Los valores obtenidos de la eficiencia de corriente instantánea (ICE) presentaron una reducción exponencial, lo cual sugiere que la transferencia de masa tiene una influencia importante en la eficiencia del proceso.

ABSTRACT Background. Coral reefs exist thanks to the delicate balance between calcification and erosion processes. However, due to anthropogenic pressures, bioerosive processes have become the main forcing factors in reef growth patterns. Nevertheless, due to the morphology of the reefs located in the Mexican South Pacific (extensive plates of pociloporids), estimating internal macrobioerosion is a challenge, resulting in a critical gap in bioerosion processes, particularly those occurring inside corals. Objectives. To measure the internal macrobioerosion of the main coral species and to know its impact on carbonate production in reefs. Methods. We used a computed tomography (CT) based approach to measure the volume of CaCO3 removed by different groups of macrobioeroders. Results. We estimated percentages of internal macrobioerosion between 16.80 % and 26.67 % of the total volume of the colonies. We observed that sponges and mollusks are the guilds that most bioerode species of branching and massive morphology, respectively. We found macrobioerosion rates of 1.51 ± 0.11 kg CaCO3 m-2 yr-1 for branched species and 0.53 ± 0.03 kg CaCO3 m-2 yr-1 for massive species. The measured bioerosion processes accounted for 39.02 % and 43.86 % of CaCO3 production. Conclusions. Although CT scanning represents higher costs than other approaches (i.e., X-rays), it is the only approach capable of measuring the internal macrobioerosion that occurs within the entire coral skeleton. This approach will allow us to produce more accurate carbonate balances than those that do not consider internal macrobioerosion, improving our estimates of the state of health of the reefs.

RESUMEN Antecedentes. Los arrecifes de coral subsisten gracias al delicado balance entre procesos de acreción y de erosión. No obstante, debido a presiones antropogénicas, los procesos bioerosivos se han convertido en los principales factores que condicionan los patrones de crecimiento de los arrecifes. Debido a la morfología de los arrecifes ubicados en el Pacífico sur mexicano (placas extensas de pocilopóridos), estimar la macrobioerosión interna se convierte en un reto, lo que resulta en una importante brecha sobre los procesos de bioerosión, particularmente los que ocurren al interior de los corales. Objetivo. Medir la macrobioerosión interna de las principales especies de coral y conocer el impacto que ejerce sobre la producción de carbonatos en los arrecifes. Métodos. Empleamos un enfoque basado en tomografía computarizada (TC) que permite medir el volumen de CaCO3 removido por diferentes grupos de macrobioerosionadores. Resultados. Estimamos porcentajes de macrobioerosión interna entre el 16.80 % y el 26.67 % del volumen total de las colonias de coral. Observamos que las esponjas y moluscos son los grupos que más bioerosionan las especies de coral con morfología ramificada y masiva, respectivamente. Encontramos tasas de macrobioerosión de 1.51 ± 0.11 kg CaCO3 m-2 año-1 para las especies ramificadas y de 0.53 ± 0.03 de kg CaCO3 m-2año-1 para las especies masivas. Los procesos de bioerosión representaron entre el 39.02 % y 43.86 % de la producción de CaCO3, que fue calculada mediante la metodología ReefBudget. Conclusiones. A pesar que emplear TC representa costos más elevados que otros enfoques (p. ej., rayos-X), hasta ahora es el único enfoque capaz de medir la macrobioerosión interna de todo el esqueleto de coral. Este enfoque permitirá producir balances de carbonatos más certeros que aquellos que no consideran la macrobioerosión interna, mejorando nuestras estimaciones del estado de salud en que se encuentran los arrecifes.

RESUMO: O presente estudo teve como objetivo avaliar se os índices obtidos com Canopeo e GreenSeeker (NDVI) em Megathyrsus maximum são capazes de estimar altura de plantas, massa de matéria seca, componentes morfológicos e teor de proteína bruta e fibra em detergente neutro em diferentes dias de crescimento. Cinco parcelas de 5 × 25 m de capim M.maximum foram definidas: sub parcelas de 1 × 1 m foram avaliadas a cada três dias, nas quais a pastagem apresenta 3, 6, 9, 12, 15, 18, 21, 24, 27 e 30 dias de rebrota. A sub parcela foi avaliada quanto à altura do dossel e acúmulo de massa. O índice do Canopeo (IC) obtido em maior altura foi menor do que o obtido em menor altura. A maior altura de medição aumentou o NDVI em relação a 0,10 m. Os maiores índices foram observados desde 18 dias de rebrota. Exceto para o IC avaliado a 0,10 m de altura, os índices não foram correlacionados com a composição química da forragem. IC e NDVI correlacionaram-se positivamente com a altura da planta, massa de MS e índice foliar, e negativamente com o índice de colmos. Assim, menores alturas de avaliação para IC e NDVI podem ser um bom preditor da altura da forragem. Valores de 0,83 e 85,8 para NDVI e IC, respectivamente, indicam um momento adequado para o início do pastejo de Megathyrsus maximum.

ABSTRACT: This study determined whether Canopeo and GreenSeeker measurements in Megathyrsus maximus can estimate plant height, dry matter mass, morphological components, and content of crude protein and neutral detergent fiber at different days of growth. Five plots of 5 × 25m M. maximus grass were defined: subplots of 1×1m were evaluated every three days, in which the pasture shows 3, 6, 9, 12, 15, 18, 21, 24, 27, and 30 days of regrowth. The subplot was evaluated for canopy height and mass accumulation. The canopeo index (CI) obtained at a higher height was lower than those obtained at a smaller height. Higher measurement height increased the normalized difference vegetation index (NDVI) relative to 0.10 m. The highest indexes were observed since 18 d of regrowth. Except for the CI evaluated at 0.10 m of height, the indexes were not correlated to the chemical composition of the forage. The CI and NDVI were positively correlated to plant height, dry matter mass, and leaf index, whereas both were negatively correlated with stalk index. Thus, lower evaluation heights for CI and NDVI can be a good predictor of forage height. Values of 0.83 and 85.8 for NDVI and CI, respectively, indicated an appropriate time to start the grazing of M. maximus.

Abstract The use of deep foundations is a common practice in geotechnical civil engineering designs, in which the bearing capacity of these foundations occurs by side resistance, tip, or through the combination of both. In the case of caisson, the bearing capacity is often obtained by considering only the resistance of the lower end due to its bell-shaped geometry, neglecting the skin friction resistance of the shaft, which may represent an oversizing in some cases. In this context, this paper analyzed the behavior of nine caisson prototypes laid at 10 m, 15 m and 20 m deep. At each depth, three types of caissons were analyzed, with and without an expanded base, and a third type with deformable material at the top of the base. The axisymmetric numerical analyses were conducted by using the finite element method considering an isotropic medium. Thus, it was found that with increasing depth, the skin frictional resistance of the surrounding soil of shaft contributes significantly to the bearing capacity of the caisson suggesting that little load would reach the base of the caisson in situations that would negligible the side resistance of the shaft in the design phase. This may be an important consideration in foundation design using caisson, as it would reduce risks to human life, as well as reduce material consumption and the generation of carbon released into the atmosphere.

Abstract We evaluate how the concentrations of inorganic nutrients and chlorophyll a vary in a heterogeneous area (Equatorial SW Atlantic), covering a gradient from stations closer to the coast to others more distant associated or not with turbid-zone reefs. Vertical temperature (27.9 ± 0.10 °C; mean ± standard deviation) and salinity (36.2 ± 0.14) profles showed that the water column is well mixed (0-30 m depth). The oligotrophic condition was marked by low concentrations of phosphate (0.30 ± 0.22 µM) and dissolved inorganic nitrogen (0.64 ± 0.74 µM). Moreover, dissolved reactive silicon (DSi) was low in most samples (< 2.0 µM), but higher (>10 µM) in nearshore stations, probably related to continental runoff and/or resuspension of the bottom sediments. The pelagic phytoplankton biomass indicated that chlorophyll a (0.25 ± 0.08 µg L-1) was low, positively correlated with light and negatively correlated with nutrients, indicating possible phytoplankton uptake. Chlorophyll a concentrations were lower in stations closer to the coast and higher in some stations near the reefs, indicating that the latter could be more prone to phytoplankton development and depletion of nutrients, especially DSi. Therefore, although oligotrophy is present along this coast, we found some unexpected heterogeneity of nutrient and chlorophyll a distributions, which were probably infuenced by benthic-pelagic coupling due to the presence of extensive reefs, sponge gardens (18-30 m depth), and the proximity to the coast. These results highlight the importance of understanding the heterogeneity of ocean productivity, especially in lesser known low-latitude areas, which showed distinct nutrient and chlorophyll a levels related to the occurrence of tropical reefs that are capable of supporting important fsh stocks and unique biological communities.

ABSTRACT Biofloc technology (BFT) has several advantages, such as low water supply requirements and apparent feed conversion ratio (FCR), and high densities. However, there is no information on adequate densities and their effect on the large-scale production of different species. In this study, we determined the effects of the stocking density of monosex red tilapia reared using BFT on the growth performance, water quality parameters, and chemical characteristics of fish on a large scale and under culture conditions in eastern Colombia. In total, six circular tanks (diameter: 14 m, height: 1 m, and capacity: 153 m³) were used in this investigation. Two stocking densities were considered: treatment 1 (T30: 30 fish/m³) and treatment 2 (T40: 40 fish/m³), in triplicate. The water quality parameters of the two treatment densities were within the normal ranges for the species, but dissolved oxygen decreased throughout the production process. The T30 and T40 treatments did not result in significant differences in growth performance. At the end of the trial, the FCRs were 1.6 and 1.7 from T30 and T40, respectively. Fishes raised at a lower density had a similar weight gain; however, their final biomass was not significantly different. BFT did not affect the nutritional characteristics of fish; the percentage of protein (%) in tilapia was 17.81% ±1% and 16.72% ±1% in the T30 and T40 groups, respectively. None of the fish were infected by Salmonella spp. or Vibrio cholerae.

RESUMO Tecnologia de bioflocos (BFT) tem vantagens em termos de redução do fornecimento de água, redução da taxa aparente de conversão alimenta FCR e aumento das densidades. Entretanto, não há informações sobre densidade adequadas e seu impacto na produção em largas escala das diferentes espécies. Este estudo teve como objetivo determinar os efeitos da densidade de povoamento da tilápia vermelha masculinizada no BFT sobre desempenho produtivo, parâmetros de qualidade da água e características químicas dos peixes em larga escala e sob condições de cultivo no leste da Colômbia. Foram usados seis tanques circulares de 14 m de diâmetro, com capacidade de 153-m3, as densidades estudadas foram tratamento 1 (T30-30 peixes/m³) e tratamento 2 (T40-40 peixes/m³), em triplicado. Os parâmetros de qualidade da água das duas densidades estavam dentro das faixas normais para a espécie, mas o oxigênio dissolvido tendia a diminuir durante todo o processo de produção. As densidades de estocagem de T30 e T40, respectivamente, não resultaram em diferenças significativas no desempenho de crescimento. No final da experiência, FCR eram 1,6 e 1,7 de T30 e T40, respectivamente. Os peixes produzidos com menor densidade tiveram um ganho de peso semelhante; entretanto, a biomassa final não apresentou diferenças significativas. O BFT não afetou as características nutricionais, a porcentagem (%) de proteína foi 17.81 ±1 e 16.72 ±1 para T30 e T40, respetivamente. Não há presença de bactérias Salmonella spp. e Vibrio cholerae na carne de tilápia.

Abstract: Background and Aims: Huauzontle (Chenopodium berlandieri subsp. nuttalliae) is a pseudocereal native to Mexico and is part of its culinary tradition. This pseudocereal is recognized for its high nutritional value and components that are associated with beneficial health effects. However, there is currently no literature on the impact that the fermentation process would have on its bioactive properties. Therefore, the aim of this research was to evaluate the effect of fermentation by Lactiplantibacillus plantarum Lp22 in huauzontle seeds suspended in water on their antioxidant and anti-inflammatory properties in vitro. Methods: Huauzontle seeds were suspended in water (0.3%, w/v), inoculated with L. plantarum Lp22 (1%, v/v) at 108 CFU/ml, and allowed to ferment for 24 h at 37 °C. Then, seeds were recovered by filtration, grounded and aqueous extract was obtained. The antioxidant activity of the extracts was determined by the ABTS and ORAC methods. Moreover, the inhibition of the enzymes lipoxygenase (LOX) and trypsin was evaluated and the total phenolic compounds in methanolic extract (Folin-Ciocalteu method) were also determined. Key results: The antioxidant activity represented as (M of Trolox equivalents was 812.50 and 927.50 by ABTS and 1384.32 and 3391.11 for ORAC, for unfermented and fermented huauzontle, respectively (p<0.05). The inhibition of LOX activity was 40.06% and 37.24% for unfermented and fermented huauzontle, respectively, while for trypsin it was 12.53% and 14.38% (p>0.05). Besides, total phenol content was 7.49 and 20.24 (g/ml (p<0.05), respectively. Conclusions: Our findings evidence that fermentation of huauzontle improves the antioxidant and anti-inflammatory properties, which may be associated with increased phenol content. Therefore, its consumption could enhance the antioxidant and immune system of the human organism.

Resumen: Antecedentes y Objetivos: El huauzontle (Chenopodium berlandieri subsp. nuttalliae) es un pseudocereal nativo de México y forma parte de su tradición culinaria. Este pseudocereal es reconocido por su alto valor nutricional y componentes que se asocian a efectos benéficos a la salud. Sin embargo, al momento no se cuenta con literatura sobre el impacto que tendría el proceso de fermentación sobre sus propiedades bioactivas. Por ello, el objetivo de la presente investigación fue evaluar el efecto de la fermentación por Lactiplantibacillus plantarum Lp22, en semillas de huauzontle suspendidas en agua, sobre sus propiedades antioxidantes y antiinflamatorias in vitro. Métodos: Semillas de huauzontle se suspendieron en agua (0.3% p/v), se inocularon con L. plantarum Lp22 (1% v/v) a una concentración de 108 UFC/ml y se fermentaron por 24 h a 37 °C. Finalmente, las semillas fueron recuperadas por filtración, se molieron y del extracto acuoso se determinó la actividad antioxidante por los métodos de ABTS y ORAC. Además, se evaluó la inhibición de las enzimas lipooxigenasa (LOX) y tripsina y se determinó la concentración de fenoles totales (método de Folin-Ciocalteu) en extractos metanólicos. Resultados clave: La actividad antioxidante representada como (M de equivalentes Trolox fue de 812.50 y 927.50 por ABTS, y 1384.32 y 3391.11, para ORAC, para huauzontle no fermentado y fermentado, respectivamente (p<0.05). La inhibición de la actividad de LOX fue de 40.06% y 37.24%, y para tripsina fue de 12.53% y 14.38% (p>0.05), para no fermentado y fermentado, respectivamente, mientras que el contenido de fenoles totales fue de 7.49 y 20.24 (g/ml (p<0.05), respectivamente. Conclusiones: Estos hallazgos indican que la fermentación del huauzontle mejora las propiedades antioxidantes y antiinflamatorias, y que pueden estar asociados con el incremento en el contenido de fenoles, por lo que su consumo podría fortalecer el mecanismo antioxidante y sistema inmune del organismo humano.

Methanol present in wastewater from the biodiesel industry can become an atmospheric pollutant and an environmental liability of effluents. This article proposes the development and performance evaluation of two spectroscopic methods, ATR-FTIR and UV-Vis, to identify and quantify methanol in aqueous media. The results of both ways exhibited remarkable linear detection, with a coefficient of determination (r2) > 0.99, wide working range, and relative standard deviation (RSD) < 12%. In the ATR-FTIR method, the detection and quantification limits were 0.064 and 0.128% m V-1, respectively. The UV-Vis method presented lower limits (0.005 and 0.008% m V-1, respectively). Finally, the methods were successfully applied to quickly and sensitively quantify the methanol present in wastewater from biodiesel-washing in a wide concentration range of 0.008-0.641% m V-1. Therefore, we evidenced the feasibility of spectroscopic methods in quality control for identifying and quantifying methanol in aqueous solution, with potential for application in biodiesel production industries and research laboratories. Mainly by ATR-FTIR, in the region of 1300-900 cm-1, as it proved to be more environmentally friendly, faster, and cheaper than the GC-FID method.

Abstract Background Decreased walking ability in patients with peripheral arterial disease is often a clinical problem and limits the quality of life and daily activities of these subjects. physical exercise is important in this scenario, as it improves both the daily walking distance and the ability to withstand intermittent claudication related to the limitations of the peripheral disease. Objectives Our aim was to compare the effects of two types of exercise training (aerobic training and aerobic training combined with resistance exercises) on pain-free walking distance (PFWD) and health-related quality of life (HRQoL) in a sample composed of patients with peripheral artery disease (PAD). Methods Twenty patients with claudication symptoms were randomized to either aerobic control (AC) N= 9, or combined training (CT) N= 8, (24 sixty-minute sessions, twice a week). The total walking distance until onset of pain due to claudication was assessed using the 6-minute walk test and HRQoL was measured using the WHOQOL-bref questionnaire (general and specific domains) at baseline and after training. We used generalized estimating equations (GEE) to assess the differences between groups for the PFWD and HRQoL domains, testing the main group and time effects and their respective interaction effects. P values < 0.05 were considered statistically significant. Results Seventeen patients (mean age 63±9 years; 53% male) completed the study. Both groups experienced improvement in claudication, as reflected by a significant increase in PFWD: AC, 149 m to 299 m (P<0.001); CT, 156 m to 253 m (P<0.001). HRQoL domains also improved similarly in both groups (physical capacity, psychological aspects, and self-reported quality of life; P=0.001, P=0.003, and P=0.011 respectively). Conclusions Both aerobic and combined training similarly improved PFWD and HRQoL in PAD patients. There are no advantages in adding strength training to conventional aerobic training. This study does not support the conclusion that combined training is a good strategy for these patients when compared with classic training.

Resumo Contexto A diminuição da capacidade de marcha em pacientes com doença arterial periférica é frequentemente um problema clínico e limita a qualidade de vida e as atividades diárias desses indivíduos. O exercício físico é importante nesse cenário, pois melhora tanto a distância caminhada diária quanto a capacidade de suportar a claudicação intermitente relacionada às limitações da doença periférica. Objetivos Comparar os efeitos do treinamento aeróbico (TA) e do treinamento aeróbico combinado com exercícios de resistência (TC) na distância percorrida livre de dor (DPLD) e na qualidade de vida relacionada à saúde (QVRS) em pacientes com doença arterial periférica (DAP). Métodos Vinte pacientes com sintomas de claudicação foram randomizados para TA ou TC. Os treinamentos foram realizados em 24 sessões, duas vezes por semana. A DPLD foi avaliada por meio do teste de caminhada de 6 minutos, e a QVRS foi medida pelo instrumento da avaliação de qualidade de vida da Organização Mundial da Saúde (WHOQOL-BREF), no início e após o treinamento. Para avaliar as diferenças entre os grupos para DPLD e os domínios da QVRS, foi utilizado o modelo de equações de estimativa generalizada, testando os efeitos principais do grupo e tempo, bem como os respectivos efeitos de interação. Valores de p < 0,05 foram considerados estatisticamente significativos. Resultados Dezessete pacientes (idade média: 63±9 anos; 53% do sexo masculino) completaram o estudo. Ambos os grupos apresentaram melhora na claudicação, refletida por um aumento significativo na DPLD: grupo controle aeróbico - de 149 m para 299 m (P < 0,001); grupo de treinamento combinado - de 156 m para 253 m (P < 0,001). Os domínios da QVRS também melhoraram de forma semelhante em ambos os grupos (capacidade física, aspectos psicológicos e qualidade de vida autorreferida; P = 0,001, P = 0,003 e P = 0,011, respectivamente). Conclusões Ambos os treinamentos melhoraram de forma semelhante a DPLD e a QVRS em pacientes com DAP. Não há vantagens em associar o treinamento de força ao treinamento aeróbico convencional. O estudo não permite concluir que o TC é uma boa estratégia para esses pacientes quando comparado ao treinamento clássico.

Abstract This study aimed to analyze the properties of 38-year-old Cariniana legalis wood from trees planted with three spacings between trees: 3 × 2.5, 3 × 2, and 3 × 1.5 m. Five trees were collected from each tree spacing. Discs were collected from the trunk base of each tree and at 2.5 and 5.0 m. The vessel diameter was significantly wider for a spacing of 3 x 2.5 m compared to that of 3 x 1.5 m. Basic density, apparent density, volumetric shrinkage, and natural moisture content were influenced by longitudinal position. However, fiber length and fiber wall thickness showed no significant differences. Basic density and natural moisture content were inversely proportional. Our study shows that the anatomical features of C. legalis wood were more sensitive to variations in tree spacing than its physical properties.

Resumen El objetivo de este estudio fue analizar las propiedades de la madera árboles de Cariniana legalis de 38 años plantados con tres espaciamientos: 3 × 2.5, 3 × 2 y 3 × 1.5 m. Se cortaron cinco árboles por cada espaciamiento. Se recolectaron discos de la base del tronco de cada árbol y a 2.5 y 5.0 m. El diámetro de los vasos fue significativamente más ancho en el espaciamiento de 3 x 2.5 m en contraste con el de 3 x 1.5 m. La densidad básica, la densidad aparente, la contracción volumétrica y el contenido de humedad natural fueron influenciados por la posición longitudinal. Sin embargo, la longitud de la fibra y el grosor de la pared de la fibra no presentaron diferencias significativas. La densidad básica y el contenido de humedad natural fueron inversamente proporcionales. Nuestro estudio muestra que las características anatómicas de la madera de C. legalis fueron más sensibles a la variación del espaciamiento entre árboles que sus propiedades físicas.

ABSTRACT Identifying factors that influence the satisfaction of undergraduate dental students can contribute to establishing strategies for improving the educational process, furthering student development, and enhancing students’ academic and professional achievements. Aim: the present study investigated associations between undergraduate students’ satisfaction with the dental course and their satisfaction with life, perception of professional career and sociodemographic factors. Materials and method: this was a cross-sectional study on 512 dental students from a Brazilian School of Dentistry. Students were asked to respond to three questionnaires about sociodemographic characteristics, academic, and professional perceptions. Satisfaction with life was measured using the Brazilian version of the Satisfaction with Life Scale, which comprises five statements with responses scored on a seven-point Likert scale ranging from “I strongly disagree” to “I strongly agree”. Unadjusted and adjusted multiple logistic regression analyses were performed to test associations between satisfaction with the dental course and key variables. Results: most participants were female (73.2%), single (99.8%) and with mean age 21.77 (±2.71) years. Approximately three quarters had a family income over three times higher than the national monthly minimum wage. Higher satisfaction with the course was associated with more optimistic perception of the job market (OR=2.44; 95% CI: 1.36-4.40), better academic performance (OR=1.65; 95% CI: 1.00-2.74) and greater satisfaction with life (OR=1.10; 95% CI: 1.06-1.15). Students’ sex and family income did not have significant impact on satisfaction with the dental course. Conclusions: satisfaction with the dental course is related to an optimistic perception of the job market, academic performance and satisfaction with life.

RESUMO Identificar os fatores que influenciam na satisfação dos estudantes de odontologia pode contribuir para o estabelecimento de estratégias que aprimorem o processo educacional, favorecendo o desenvolvimento dos alunos e potencializando suas conquistas acadêmicas e profissionais. Objetivo: o presente estudo investigou as associações entre a satisfação de estudantes de graduação com o curso de odontologia e sua satisfação com a vida, percepção da carreira profissional e fatores sociodemográficos. Materiais e método: um estudo transversal foi realizado com 512 estudantes de Odontologia de uma Faculdade Brasileira de Odontologia. Três questionários foram aplicados aos alunos, com o objetivo de avaliar as características sociodemográficas, percepções acadêmicas e profissionais. A satisfação com a vida foi mensurada pela versão brasileira da Escala de Satisfação com a Vida, que compreende cinco afirmações com respostas pontuadas em uma escala Likert de sete pontos, variando de “discordo totalmente” a “concordo totalmente”. A análise de regressão logística foi realizada para testar associações entre a satisfação com o curso de Odontologia e as demais variáveis. Análises de regressão logística múltipla não-ajustada e ajustada foram realizadas para testar associações entre a satisfação com o curso de odontologia e variáveis-chave. Resultados: A maioria dos participantes era do sexo feminino (73,2%), solteiros (99,8%) e com média de idade de 21,77 (±2,71) anos. Aproximadamente três quartos tinham renda familiar três vezes superior ao salário-mínimo nacional. A maior satisfação dos alunos com o curso foi associada a maior percepção otimista do mercado de trabalho (OR=2,44; IC 95%: 1,36-4,40), desempenho acadêmico (OR=1,65; IC 95%: 1,00-2,74) e satisfação com a vida (OR =1,10; IC 95%: 1,06-1,15). O sexo dos alunos e a renda familiar não apresentaram impacto significativo na satisfação com o curso de odontologia. Conclusão: a satisfação com o curso de odontologia está relacionada com a percepção otimista do mercado de trabalho, desempenho acadêmico e satisfação com a vida.