RESUMO Porcos tibetanos são caracterizados por diferenças fenotípicas significativas em relação aos porcos de planície. Nosso estudo anterior demonstrou que os genes CRYAB e CTGF eram expressos diferentemente nos tecidos do coração entre os porcos tibetanos (raça das terras altas) e Yorkshire (raça das terras baixas), indicando que eles poderiam participar da adaptação à hipoxia. CRYAB (ɑB-crystallin) e CTGF (fator de crescimento do tecido conjuntivo) também foram relatados como estando associados ao desenvolvimento pulmonar. Entretanto, os padrões de expressão do CRYAB e CTGF nos tecidos pulmonares em diferentes altitudes e sua caracterização genética não são bem compreendidos. Neste estudo, o qRT-PCR e a mancha ocidental de tecido pulmonar revelou níveis de expressão de CRYAB mais elevados em porcos tibetanos e Yorkshire de altitude e média altitude do que em seus pares de planície. Com um aumento na altitude, o nível de expressão do CTGF aumentou nos porcos tibetanos, enquanto diminuiu nos porcos Yorkshire. Além disso, foram identificados dois novos polimorfismos de um único nucleotídeo na região flanqueadora de CRYAB (g.39644482C>T e g.39644132T>C) e CTGF (g.31671748A>G e g.31671773T>G). O polimorfismo pode contribuir parcialmente com as diferenças nos níveis de expressão entre grupos a uma mesma altitude. Estas descobertas proporcionam novos conhecimentos sobre as adaptações de hipoxia a alta altitude dos porcos tibetanos.

ABSTRACT Tibetan pigs are characterized by significant phenotypic differences relative to lowland pigs. Our previous study demonstrated that the genes CRYAB and CTGF were differentially expressed in heart tissues between Tibetan (highland breed) and Yorkshire (lowland breed) pigs, indicating that they might participate in hypoxia adaptation. CRYAB (ɑB-crystallin) and CTGF (connective tissue growth factor) have also been reported to be associated with lung development. However, the expression patterns of CRYAB and CTGF in lung tissues at different altitudes and their genetic characterization are not well understood. In this study, qRT-PCR and western blot of lung tissue revealed higher CRYAB expression levels in highland and middle-highland Tibetan and Yorkshire pigs than in their lowland counterparts. With an increase in altitude, the expression level of CTGF increased in Tibetan pigs, whereas it decreased in Yorkshire pigs. Furthermore, two novel single-nucleotide polymorphism were identified in the 5′ flanking region of CRYAB (g.39644482C>T and g.39644132T>C) and CTGF (g.31671748A>G and g.31671773T>G). The polymorphism may partially contribute to the differences in expression levels between groups at the same altitude. These findings provide novel insights into the high-altitude hypoxia adaptations of Tibetan pigs.

Slope instability is one of the major concerns in open pit mining. A significant collapse of the pit wall can result in injuries or fatalities, damage to mining equipment, interruptions to production, and potential loss of reserves. Properly interpreted microseismic data can be used to augment surface monitoring systems in identifying potential instability and the associated failure mode. A challenge for this microseismic application is that many seismic events associated with slope movements are weak and they hardly trigger a microseismic monitoring system that is set up to record an event in a trigger mode. A research project carried out at an open pit mine in Australia used both trigger mode and continuous mode to record microseismic events. The preliminary results have shown that the weak events are equally important as the strong seismic events for slope stability assessment, and they should not be ignored in microseismic monitoring for open pit mining.

ABSTRACT: Introduction: Evidence shows a lag in adoption of evidence-based practices (EBPs) for substance abuse treatment and supports the need for studying the factors involved in this worldwide problem. Objective: This study aimed to assess the readiness and barriers to adopt EBPs for substance abuse in a sample of outpatient treatment centers of a newly created Mexican Clinical Trials Network. Method: An online survey was administered to directors (n = 8) and clinicians (n = 40) from seven outpatient treatment centers in Mexico. Questions were obtained from two surveys that had been implemented in the US to assess the same objectives. Results: Respondents reported being more ready to adopt Cognitive Behavioral Therapy (CBT, 83.3%) and Motivational Enhancement Therapy (MET, 79.1%), compared to 12 step facilitation (58.3%), couples therapy (56.2%), Brief Strategic Family Therapy (BSFT, 66.6%), and motivational incentives (60.4%). Directors had lower mean resistance to EBPs (11.8 vs. 17.4; p = 0.01) than clinicians. The biggest barriers identified by directors to EBP adoption were not having enough clinical staff, being unable to afford well-trained staff, not enough psychiatric and medical support. Discussion and conclusion: CBT and MET emerged as the most frequently used evidence based practices in the sites that are part of the Mexican Clinical Trials Network. Staff positive attitudes towards EBPs are critical for adoption.

RESUMEN: Introducción: La literatura demuestra una demora en la adopción de las practicas basadas en la evidencia (PBEs) para el tratamiento del abuso de sustancias y apoya la necesidad de estudiar los factores involucrados en este problema mundial. Objetivo: Este estudio evaluó la disponiblildad y las barreras de la adopción de PBE para el abuso de sustancias en una muestra de centros pertenencientes a la nueva Red Mexicana de Ensayos Clinicos. Método: Se administró una encuesta online a directores (n = 8) y a clinicos (n = 40) de siete centros de tratamiento ambulatorio para el tratamiento de las adicciones en México. Las preguntas se obtuvieron de dos encuestas que se administraron en los Estados Unidos con los mismos objetivos. Resultados: Los encuestados reportaron estar más dispuestos a la adopción de la Terapia Cognitivo Conductual (CBT,83.3%) y Terapia de Incremento Motivacional (MET, 79.1%),comparado con la facilitación de los 12 pasos (58.3%),terapia de pareja (56.2%), Terapia Familiar Breve y Estratégica (BSFT, 66.6%),e incentivos para la motivación (60.4%). Los directores tuvieron menor promedio de Resistencia a las PBEs (11.8 vs. 17.4; p = 0.01) que los clinicos. Las principales barreras identificadas por los directores fueron no tener suficiente personal clínico, no poder costear personal altamente entrenado, apoyo psiquiátrico y médico insuficiente. Discusión y conclusión: La CBT y la MET emergieron como las PBEs usadas con mayor frecuencia en centros que son parte de la Red Mexicana de Ensayos Clínicos. Las actitudes positivas del personal hacia las PBEs son críticas para la adopción.

Resumo Este estudo teve como objetivo medir a pré-carga em diferentes conexões implante/pilar baseado em imagens de micro-CT. Implantes de hexágono externo (EH) e Cone Morse (MT) (n = 5) foram utilizados para a medição de pré-carga. Os parafusos de pilares foram digitalizados em um micro-CT de alta resolução para obter seus modelos virtuais, que foram utilizados para registrar o comprimento inicial. Os pilares foram parafusados sobre o implante com um torque de 20 Ncm e, o conjunto composto por implante, parafuso do pilar e pilar foi levado para o micro-CT para obter cortes virtuais dos espécimes. Esses cortes permitiram a medida do comprimento dos parafusos após a aplicação do torque. Assim, com base no alongamento dos parafusos, os valores de pré-carga foram calculados usando a Lei de Hooke. A pré-carga de ambos os grupos foram comparados pelo Test-t independente. O torque de remoção de cada espécime foi registrado. Para avaliar a precisão da técnica de micro-CT, três bastões foram escaneados em micro-CT e o comprimento do seu modelo virtual foi comparado com o comprimento original dos bastões. Um bastão foi digitalizado e mensurado quatro vezes para avaliar a variação do método de medição e a sua repetitividade. Não houve diferença entre os grupos para a pré-carga (EH = 461,6 N e MT = 477,4 N), no entanto o grupo EH apresentou maiores valores de torque de afrouxamento do parafuso (13,8 ± 4,7 contra 8,2 ± 3,6 Ncm para o grupo MT). A técnica de micro-CT mostrou uma variabilidade de 0,053% e a repetitividade apresentou um erro de 0,23 a 0,28%. Dentro das limitações deste estudo, não houve diferença entre Hexágono Externo e Cone Morse para pré-carga. O método baseado em imagens de micro-CT pode ser considerado para mensuração da pré-carga.

This study aimed to measure the preload in different implant platform geometries based on micro-CT images. External hexagon (EH) implants and Morse Tapered (MT) implants (n=5) were used for the preload measurement. The abutment screws were scanned in micro-CT to obtain their virtual models, which were used to record their initial length. The abutments were screwed on the implant with a 20 Ncm torque and the set composed by implant, abutment screw and abutment were taken to the micro-CT scanner to obtain virtual slices of the specimens. These slices allowed the measurement of screw lengths after torque application and based on the screw elongation. Preload values were calculated using the Hooke's Law. The preloads of both groups were compared by independent t-test. Removal torque of each specimen was recorded. To evaluate the accuracy of the micro-CT technique, three rods with known lengths were scanned and the length of their virtual model was measured and compared with the original length. One rod was scanned four times to evaluate the measuring method variation. There was no difference between groups for preload (EH = 461.6 N and MT = 477.4 N), but the EH group showed higher removal torque values (13.8±4.7 against 8.2±3.6 Ncm for MT group). The micro-CT technique showed a variability of 0.053% and repeatability showed an error of 0.23 to 0.28%. Within the limitations of this study, there was no difference between external hexagon and Morse taper for preload. The method using micro-CT may be considered for preload calculation.

18F-fluoro-2-deoxyglucose (FDG) positron emission tomography (PET)/computed tomography (CT) is widely used to diagnose and stage non-small cell lung cancer (NSCLC). The aim of this retrospective study was to evaluate the predictive ability of different FDG standardized uptake values (SUVs) in 74 patients with newly diagnosed NSCLC. 18F-FDG PET/CT scans were performed and different SUV parameters (SUVmax, SUVavg, SUVT/L, and SUVT/A) obtained, and their relationship with clinical characteristics were investigated. Meanwhile, correlation and multiple stepwise regression analyses were performed to determine the primary predictor of SUVs for NSCLC. Age, gender, and tumor size significantly affected SUV parameters. The mean SUVs of squamous cell carcinoma were higher than those of adenocarcinoma. Poorly differentiated tumors exhibited higher SUVs than well-differentiated ones. Further analyses based on the pathologic type revealed that the SUVmax, SUVavg, and SUVT/L of poorly differentiated adenocarcinoma tumors were higher than those of moderately or well-differentiated tumors. Among these four SUV parameters, SUVT/L was the primary predictor for tumor differentiation. However, in adenocarcinoma, SUVmax was the determining factor for tumor differentiation. Our results showed that these four SUV parameters had predictive significance related to NSCLC tumor differentiation; SUVT/L appeared to be most useful overall, but SUVmax was the best index for adenocarcinoma tumor differentiation.

To prepare expandable graphite (EG) with high anti-flame property for Linear low density polyethylene (LLDPE), dosages of oxidant KMnO4, intercalation reagent H2SO4 and ancillary intercalation reagent Na4P2O7 were optimized during oxidation intercalation reaction of natural graphite. EG with an initiation expansion temperature of 148 ± 2 °C and expansion volume of 550 mL/g can be prepared according to the mass ratio of C:KMnO4:H2SO4(98%):Na4P2O7 = 1.0:0.4:5.0:0.6 (H2SO4 should be diluted to the mass concentration of 80% before intercalation reaction), the reaction time is 40 min at constant 40 °C. Addition of 30% of the prepared EG to LLDPE can improve its limiting oxygen index LOI from 17.5% to 29.4%, and the synergistic anti-flame LOI of 20% EG with 10 polyphosphate (APP II) can reach to 31.2%. TG and DTA analysis were completed to discuss the anti-flame mechanism. 70%LLDPE/10%APP(II)/20%EG synergistic anti-flame system can cause higher residual carbon and lower material surface temperature.