Abstract The main purpose of this study was to answer the question: “Can radiotherapy cause changes in the dental pulp condition of patients treated with irradiation in the head and neck region?” Clinical observational studies in adults with head and neck cancer undergoing treatment with ionizing radiation, longitudinal or cross-sectional follow-up to measure oxygen saturation (SpO2), and/or pulp sensitivity test to cold stimulation, were considered eligible. A systematic literature search was performed in six different databases, including the gray literature, and in article references. Two independent evaluators selected the studies, extracted the data, recorded the data on electronic spreadsheets, and then evaluated the methodological quality using the Checklist for Quasi-Experimental Studies tool devised by JBI. The data were assessed qualitatively using the Synthesis Without Metanalysis (SWiM) guidelines. After removing the duplicate articles, carefully analyzing the titles and abstracts, and reading the papers in full, seven studies were included. Four of the studies evaluated applied the cold sensitivity test, two associated pulse oximetry and cold sensitivity, and only one used just pulse oximetry. Evaluation using the cold sensitivity test and pulse oximetry in the initial periods before radiotherapy showed a decrease in the sensitive response and in SpO2 levels during a maximum period of 1 year. However, analyses thereafter indicated a normal response in both tests from 5 to 6 years after the end of radiotherapy treatment. Radiotherapy causes changes in pulp behavior patterns in the short term; however, recovery and return to average values occurs after long periods. question Can region region? radiation crosssectional cross sectional followup follow up SpO2, SpO , (SpO2) andor stimulation eligible databases references spreadsheets QuasiExperimental Quasi Experimental JBI SWiM (SWiM guidelines articles abstracts full included year However term however (SpO2 (SpO

Abstract This study evaluated a method to determine the spatial geometry of root canal preparation (RCP) using navigation dynamics and a specific algorithm from a new CBCT software (e-Vol DX). CBCT scans of 168 root canals of mandibular molars were acquired before and after RCP, using nickel-titanium (NiTi) instruments (ProTaper Next, BioRace, Reciproc Blue, and WaveOne Gold). The spatial geometry of the root canals and the operative risk of disproportional wear of dentinal walls after RCP were evaluated using a new CBCT software. A 3-point scoring system was used after the measuring of cementum/dentin thickness before and after RCP in all root thirds. The root thirds were distributed into three parts of similar sizes, and the scores were categorized at three levels: 1. mild risk (1/3), 2. moderate risk (2/3), 3. severe risk (3/3). These levels were proposed according to the risk of creating disproportionate shapes, thin walls, or perforations. The data were analyzed statistically by Fischer’s exact test (α = 5%). There were no significant differences in operative risk among the NiTi engine-driven systems, for the distal or mesial walls of all the root canal thirds (p>0.05). The spatial geometry method to assess operative risk allows clinical planning for a predictable enlargement of the root canal in all root thirds. Based on using a map-reading strategy on root canals in CBCT scans, NiTi engine-driven instruments did not present an increased operative risk during RCPs. (RCP eVol e Vol DX. DX . DX) 16 nickeltitanium nickel titanium (NiTi ProTaper Next BioRace Blue Gold. Gold Gold) 3point point 3 cementumdentin cementum dentin sizes 1 1/3, 13 1/3 , (1/3) 2 2/3, 23 2/3 (2/3) 3/3. 33 3/3 (3/3) shapes perforations Fischers Fischer s α 5%. 5 5% 5%) enginedriven engine driven systems p>0.05. p005 p p>0.05 0 05 (p>0.05) mapreading map reading RCPs 1/ (1/3 2/ (2/3 3/ (3/3 p00 p>0.0 (p>0.05 (1/ (2/ (3/ p0 p>0. (p>0.0 (1 (2 (3 p>0 (p>0. ( p> (p>0 (p> (p

Resumo Este estudo avaliou um método para determinar a geometria espacial do preparo do canal radicular (PCR) usando uma dinâmica de navegação e um algoritmo específico do software e-Vol DX. Imagens de tomografia computadorizada de feixe cônico (TCFC) de 168 molares inferiores foram adquiridas antes e depois do PCR, usando instrumentos de níquel-titânio (NiTi) (ProTaper Next, BioRace, Reciproc Blue e WaveOne Gold). A geometria espacial dos canais radiculares e o risco operatório de desgaste desproporcional das paredes dentinárias após o preparo foram avaliados usando o software de TCFC e-Vol DX. Um sistema de Score de 3 pontos foi usado após a mensuração da espessura cemento/dentina antes e depois do PCR, em toda extensão dos canais radiculares. Os terços radiculares foram distribuídos em três partes de tamanhos semelhantes, e os Scores foram categorizados em três níveis: 1. risco leve (1/3), 2. risco moderado (2/3), 3. risco severo (3/3). Esses níveis foram propostos de acordo com o risco de criar formas desproporcionais, paredes finas ou perfurações radiculares. Os dados foram analisados estatisticamente pelo teste exato de Fischer ((=5%). Não houve diferenças significativas no risco operatório entre os sistemas de NiTi acionados a motor, para as paredes distal ou mesial em todos os terços do canal radicular (p>0,05). O método de geometria espacial para avaliar o risco operatório permite o planejamento clínico para um alargamento previsível do canal radicular em todos os terços radiculares. Com base no uso de uma estratégia de navegação dinâmica de canais radiculares de molares inferiores analisados em imagens de TCFC, os instrumentos de NiTi acionados estudados não apresentaram um aumento do risco operatório durante o preparo dos canais radiculares. PCR (PCR eVol Vol DX (TCFC 16 níqueltitânio níquel titânio (NiTi ProTaper Next BioRace Gold. Gold . Gold) cementodentina cemento dentina semelhantes 1 1/3, 13 1/3 , (1/3) 2 2/3, 23 2/3 (2/3) 3/3. 33 3/3 (3/3) desproporcionais =5%. 5 =5% ((=5%) motor p>0,05. p005 p p>0,05 0 05 (p>0,05) 1/ (1/3 2/ (2/3 3/ (3/3 =5 ((=5% p00 p>0,0 (p>0,05 (1/ (2/ (3/ = ((=5 p0 p>0, (p>0,0 (1 (2 (3 ((= p>0 (p>0, ( (( p> (p>0 (p> (p

Abstract: This study measured the thickness of cementum/dentin in the danger zone of the mandibular molars after root canal preparation using novel cone-beam computed tomography (CBCT) software. Eighty-four teeth were distributed into four groups: ProTaper Next, BioRace, Reciproc Blue, and WaveOne Gold. E-Vol DX® CBCT software was used to measure initial and final remaining cementum-dentin thicknesses after root canal preparation of the mesial root of mandibular molars at 1 and 3 mm from the furcation. The Kolmogorov-Smirnov test was used to test variable symmetry. The variables were described as mean and standard deviations, compared among the groups using analysis of variance (ANOVA), and within the groups using the Student t test. A generalized estimating equation model was used to compare the variation before and after root canal preparation. The level of significance was set at 5%. Differences between mean initial and final thicknesses of the mesiobuccal (MB) and mesiolingual (ML) canals were not statistically significant. The mean initial thickness was 3 mm (0.900 mm ± 0.191), considering that a mean lower than 1 mm (1.035 mm ± 0.184) indicates the danger zone. Although cementum/dentin is thinner at 3 mm from the furcation (0.715±0.186) after root canal preparation, the greatest amount of dentin removed was found at 1 mm (0.734 ± 0.191). The cementum-dentin remaining after preparation was thicker than 0.715 mm in root canals prepared using #35 (WaveOne Gold®) and #40 (ProTaper Next®, BioRace® and Reciproc Blue®) instruments. This confirms the safety of canal preparation in the danger zone using these systems.

Abstract: Maxillary and mandibular incisors have increased risk for severe orthodontically induced inflammatory root resorption. A patient-related risk factor is aberrant root morphology. This study aimed to assess the frequency of detection of different root morphologies in anterior teeth using dental panoramic tomography (DPT) and long cone periapical radiographs (LCPAs). A retrospective cross-sectional design was used to assess a sample of 50 consecutive pre-treatment radiographic records of patients from a specialist orthodontic practice in Adelaide, Australia. A reference guide was developed that included three previously unreported morphologies: pipette and bent, bent and pointed, bent and blunt. Two trained and calibrated assessors examined each record against the inclusion criteria, then independently assessed each anterior tooth from DPTs and LCPAs to detect the type of root morphology present. Data were analysed using the chi-square statistical test. Radiographic records for 48 patients (48 DPTs and 161 LCPAs) were eligible, with 355 and 426 teeth on DPTs and LCPAs, respectively, included for assessment. Normal root morphology (119 teeth) was commonly observed in DPTs, while bent (154 teeth) was frequently observed using LCPAs. Mandibular incisors often had normal morphology in DPTs but bent in LCPAs. Bent was the most common morphology in maxillary lateral incisors using DPT and LCPAs, although maxillary centrals were mostly normal in DPTs but pointed in LCPAs. Differences using the two image acquisition methods were highly significant (p < 0.01). Aberrant root morphologies are more easily detected in anterior teeth using LCPAs compared to DPTs.

Abstract This study evaluated the interference of enamel and coronal dentin thickness and ambient light in pulse oximetry interpretation, using SaO2the human finger as a reference. Forty-two intact human permanent mandibular molars were sectioned mesiodistally in the central portion. Buccal and lingual dentin surfaces were drilled, and 4 mm, 3 mm and 2 mm enamel/dentin thicknesses were interposed between finger and device, after which SaO2 levels were measured by finger pulse oximetry. A reference device was designed to align pulse oximeter light-emitting diode, buccal surface of tooth, little finger, lingual surface of tooth and photodiode. Variables were described as means and standard deviation, and the confidence interval was reported. Repeated measures analysis of variance (ANOVA) was used to compare the groups, followed by Bonferroni correction. Student t test for paired samples was used to determine presence of ambient light (α = 0.05). Mean SaO2 level was lower at 4.0 ± 0.2 mm thickness, regardless of presence or absence of ambient light (92.7% and 89.3%). The other thicknesses yielded values of 95.5% and 94.5% at 3.0 ± 0.2 mm, and 96.4% and 96.0% at 2.0 ± 0.2 mm (p < 0.001). There were significant differences between SaO2 values at 4.0 ± 0.2 mm, 3.0 ± 0.2 mm and 2.0 ± 0.2 mm thicknesses, in the presence of ambient light. Mean SaO2 level in positive control was 96.3%, and mean pulse rate was 69.5 bpm in presence of ambient light; in the absence of light, these values were 96% and 70.5 bpm. Enamel and dentin thickness interfere with SaO2, regardless of presence or absence of ambient light. The lowest SaO2 levels were found for the thickest tooth samples.

Abstract This study presents an overview of the accuracy of cone beam computed tomography (CBCT) compared with micro-computed tomography (μCT) in the assessment of root canal morphology of extracted human permanent teeth. A database search in PubMed, PubMed Central, Embase, Scopus, Opengrey, Scielo and Virtual Health Library was conducted which compared root canal morphology of extracted human permanent teeth on the accuracy of CBCT with μCT. In accordance with PRISMA statement guidelines, data were extracted on study characteristics, target mediators, sampling and assay techniques and the parameters associated with obtaining the image and ability to identify the root canal morphology. Amongst 2734 records, ten fulfilled the inclusion criteria. Four studies compared the accuracy of CBCT and μCT in the assessment of root canal morphology using Vertucci’s classification, with at least one CBCT group or subgroup of each study presented high agreement compared to the μCT. Six studies assessed more detailed root canal morphology, including two articles that found a lack of agreement between these imaging systems. Risk of bias was deemed low in three studies, moderate in four and high in three. CBCT can be as accurate as μCT in the assessment of several morphological features of extracted human permanent teeth; however there are some exceptions related to the more detailed morphological aspects. Voxel size likely influences the ability to detect these features, though the different aspects of exposure setting used in studies components may be confounding factors. CBCT may be considered for the assessment of root canal morphology ex-vivo.

Abstract Objective To assess pulp oxygen saturation levels (SaO2) in maxillary central incisors after dental bleaching. Materials and Methods 80 participants (160 teeth) were randomly allocated to four groups: G1 In-office bleaching with two applications of 35% hydrogen peroxide (HP) (20 minutes), followed by at-home bleaching with 10% carbamide peroxide (CP) (2 hours/day for 16 days); G2 - Same protocol as G1, plus desensitizing toothpaste; G3 - In-office bleaching with 35% HP and one application of placebo gel (20 minutes), followed by at-home bleaching with 10% CP (2 hours/day for 16 days); and G4 - Same protocol as G3, plus desensitizing toothpaste. Pulp SaO2 levels were measured before (T0) and immediately after (T1) in-office bleaching; on the 5th (T2), 8th (T3), 12th (T4), and 16th days of at-home bleaching (T5); and on the 7th (T6) and 30th (T7) days. Mean (SD) pulp SaO2 levels were compared within groups by generalized estimating equations (GEE) and Student’s t-test (P<0.05). Results Mean pulp SaO2 at T0 was 84.29% in G1, 84.38% in G2, 84.79% in G3, and 85.83% in G4. At T1, these values decreased to 81.96%, 82.06%, 82.19%, and 81.15% in G1, G2, G3, and G4 respectively, with significant difference in G4 (P<0.05). During home bleaching, pulp SaO2 levels varied in all groups, with 86.55%, 86.60%, 85.71%, and 87.15% means at T7 for G1, G2, G3, and G4, respectively; G2 presented significant difference (P<0.05). Conclusions Pulp SaO2 level in maxillary central incisors was similar at baseline, reducing immediately after in-office bleaching, regardless of using desensitizing toothpaste and increasing at 30 days after dental bleaching.

Abstract: Root perforation results in the communication between root canal walls and periodontal space (external tooth surface). It is commonly caused by an operative procedural accident or pathological alteration (such as extensive dental caries, and external or internal inflammatory root resorption). Different factors may predispose to this communication, such as the presence of pulp stones, calcification, resorptions, tooth malposition (unusual inclination in the arch, tipping or rotation), an extra-coronal restoration or intracanal posts. The diagnosis of dental pulp and/or periapical tissue previous to root perforation is an important predictor of prognosis (including such issues as clinically healthy pulp, inflamed or infected pulp, primary or secondary infection, and presence or absence of intracanal post). Clinical and imaging exams are necessary to identify root perforation. Cone-beam computed tomography constitutes an important resource for the diagnosis and prognosis of this clinical condition. Clinical factors influencing the prognosis and healing of root perforations include its treatment timeline, extent and location. A small root perforation, sealed immediately and apical to the crest bone and epithelial attachment, presents with a better prognosis. The three most widely recommended materials to seal root perforations have been calcium hydroxide, mineral trioxide aggregate and calcium silicate cements. This review aimed to discuss contemporary therapeutic alternatives to treat root canal perforations. Accordingly, the essential aspects for repairing this deleterious tissue injury will be addressed, including its diagnosis, prognosis, and a discussion about the materials actually suggested to seal root canal perforation.

Abstract Multicystic and unicystic ameloblastomas are benign odontogenic tumors that present distinct biological behavior. The investigation of stem cells has become an important branch of tumor biology, with several studies addressing the possible role of these cells in tumor growth, angiogenesis, progression, infiltration and invasiveness. This study evaluated the immunohistochemical expression of CD90(Thy-1) and P75NTR stem cell markers in multicystic and unicystic ameloblastomas. Seventeen (17) samples of ameloblastomas (multicystic, n = 10; unicystic, n = 7) were submitted to immunohistochemical reactions and graded semi-quantitatively. The Kolmogorov-Smirnov test was used to verify possible differences in CD90 and P75NTR expressions between multicystic and unicystic ameloblastomas (p < 0.05). CD90 immunostaining was observed in all multicystic ameloblastoma specimens (n = 10), in the cytoplasm of the fibroblasts and vascular endothelial cells of the tumor stroma, near the neoplastic odontogenic epithelia. The staining of stromal CD90 was significantly higher in multicystic than in unicystic ameloblastomas (p = 0.003). Nuclear P75NTR immunostaining was observed in all ameloblastoma specimens. A significant difference was seen in the epithelial staining of P75NTR between multicystic and unicystic types (p = 0.007). The increased expression of CD90 and P75NTR found in multicystic ameloblastomas suggests a behavioral biological difference between multicystic and unicystic ameloblastomas, as well as a difference in ameloblastoma development.

O objetivo do estudo foi monitorar tratamentos de canais radiculares (TCR) convencionais e com auxílio de cirurgia periapical. Este estudo prospectivo constituiu de 80 pacientes portadores de infecções primárias e secundárias persistentes e periodontite apical (PA). O índice periapical utilizando tomografia computadorizada de feixe cônico (CBCTPAI) foi utilizado como auxiliar no diagnóstico, planejamento e para determinar a melhor estratégia terapêutica. Apenas 40 pacientes retornaram para o TCR. Em 20 pacientes (26 dentes) com diagnósticos de infecções primárias e PA foram feitos TCR convencionais e monitoramentos por 10 a 36 meses. Em 20 pacientes (31 dentes) com diagnósticos de infecções secundárias persistentes foram submetidos a procedimentos cirúrgicos e acompanhamentos durante 6 a 30 meses. Os resultados mostraram TCR bem sucedidos em 19 de 26 casos, com curas completas das PA (5 de 26 com reparação parcial) em controles de 10 a 36 meses. Para os casos de tratamentos cirúrgicos foram detectadas eficácias das terapêuticas cirúrgicas em 10 de 31 casos com curas completas (10 de 31 casos com reparação parcial) em controles de 6 a 30 meses. O retorno dos pacientes para controle clínico e radiográfico e a obediência ao período de tempo proposto está muito aquém do ideal. Os níveis de sucesso em ambos os protocolos terapêuticos se mostraram elevados. Fracassos no TCR foram detectados mesmo utilizando protocolo clínico com rigoroso padrão.

The aim of this study was to monitor nonsurgical and surgical root canal treatment (RCT) of teeth with primary and secondary infections and apical periodontitis (AP). This prospective clinical study comprised the treatment of 80 patients with primary and persistent secondary infections and AP. Of this initial sample, forty patients did not return. Periapical index using cone beam computed tomography scans (CBCTPAI) was used to aid diagnosis, planning and to determine the better therapeutic strategy. Twenty patients (26 teeth) diagnosed with primary infection and AP received conventional RCT and were followed up for 10 to 36 months. Twenty patients (31 teeth) diagnosed with persistent secondary infection were submitted to periapical surgical and followed up for 6 to 30 months. The results showed RCT successful in 19/26 cases with complete AP healing (5/26 with partial repair) in 10-36 months of follow up. For the surgically managed cases, effectiveness of surgical therapy was detected in 10/31 cases with complete healing (10/31 cases with partial repair) within 6-30 months follow up. The return of patients for clinical and radiographic follow-up, and obedience to the proposed time period was very short from ideal. The levels of success in both therapeutic protocols were high. RCT failures were detected even with rigorous standard clinical protocols.

O objetivo deste estudo foi detectar reabsorção radicular inflamatória apical (RRIA) associada à lesão periapical utilizando tomografia computadorizada de feixe cônico (TCFC) e microscopia eletrônica de varredura (MEV). Este estudo clínico avaliou RRIA em 88 ápices radiculares de 52 dentes permanentes de 14 pacientes, extraídos por diferentes motivos. Os pacientes foram submetidos a uma entrevista clínica, revisão da história médica/dental, exames clínicos e de imagem para o plano de tratamento. Todos os dentes selecionados apresentaram condição não restaurável devido à extensa perda de estrutura dental associada a lesões cariosas, e infecção do canal radicular associada a lesões periapicais. TCFC foram obtidas dos pacientes com o objetivo de diagnosticar as alterações periapicais que se mostraram complexas ou duvidosas. Dois examinadores avaliaram a presença ou ausência de RRIA. Os ápices foram também analisados por MEV. O teste do qui-quadrado foi usado para comparar os métodos de detecção de RRIA. O nível de significância foi estabelecido em 5%. RRIA associada à infecção do canal radicular e periodontite apical foi encontrada em 61,4% dos casos estudados usando MEV, e pelo menos metade dos casos utilizando TCFC. A análise microscópica continua a ser o padrão frente a métodos de imagens para a identificação de RRIA.

The aim of this study was to detect apical inflammatory root resorption (AIRR) associated with periapical lesion using cone beam computed tomography (CBCT) and scanning electronic microscopy (SEM). This clinical study evaluated AIRR in 88 root apexes, from 52 permanent teeth of 14 patients, extracted for different reasons. The patients were submitted to a clinical interview, review of dental/medical histories and clinical/imaging examinations for treatment planning. All selected teeth showed unrestorable condition because of the extensive coronal breakdown due to carious lesions, and root canal infection associated with periapical lesions. CBCT images were obtained from the patients with the aim of diagnosing the periapical diseases which showed complex or doubtful conditions. Two examiners assessed the presence or absence of AIRR. Apices were also analyzed under SEM. Chi-square test was used to compare the imaging methods for detection of AIRR. The level of statistical significance was set at 5%. AIRR associated with root canal infection and apical periodontitis was found in 61.4% of the cases studied by using SEM, and at least half of the cases by CBCT. The microscopic analysis remains as a reference standard against the imaging method to identify AIRR.

OBJECTIVE:To evaluate the discrepancy of root canal filling (RCF) measurements obtained from original root specimens and cone-beam computed tomography (CBCT) images. MATERIAL AND METHODS: Seventy-two human maxillary anterior teeth were prepared up to an ISO #50 K-File 1 mm short of the apical foramen. Thus, the teeth were randomly divided into 8 groups, according to the root canal filling material: Sealapex ®, Sealapex®+gutta-percha points, Sealer 26®, Sealer 26®+gutta-percha points, AH PlusTM, AH PlusTM+gutta-percha points, Grossman Sealer, and Grossman Sealer+gutta-percha points. After root canal preparation and RCF, CBCT scans were acquired and the specimens were sectioned in axial, sagittal and coronal planes. The RCF measurements were obtained in different planes and thicknesses to determine the discrepancy between the original root specimens (using a digital caliper) and the CBCT images (using the scanner’s proprietary software). One-way analysis of variance and Tukey tests were used for statistical analyses. The significance level was set at α=5%. RESULTS: Measurements of the different endodontic filling materials were 9% to 100% greater on the CBCT images than on the original root specimens. Greater RCF dimensions were found when only sealers were used, with statistically significant difference among the groups. CONCLUSIONS: RCF dimensions were greater on CBCT images than on the original root specimens, especially when only sealer was used.

The efficacy of the sodium hypochlorite (NaOCl) and chlorhexidine (CHX) on Enterococcus faecalis was evaluated by systematic review and meta-analysis. The search strategies included search in electronic biomedical journal databases (MEDLINE, EMBASE, CENTRAL) and handsearching records, using different matches of keywords for NaOCl, CHX and Enterococcus faecalis. From 41 in vivo studies, 5 studies met the inclusion criteria. In a sample containing 159 teeth, E. faecalis was detected initially in 16 (10%) teeth by polymerase chain reaction (PCR) and 42 (26.4%) teeth by microbial culture techniques. After root canal disinfection, this species was observed in 11 (6.9%) teeth by PCR and 12 (7.5%) teeth by culture. Risk differences of included studies were combined as generic inverse variance data type (Review Manager Version 5.0 _ Cochrane Collaboration, http://www.cc-ims.net, accessed 15 May 2008), taking into account the separate tracking of positive and negative cultures/PCR. The level of statistical significance was set at p<0.05. In conclusion, NaOCl or CHX showed low ability to eliminate E. faecalis when evaluated by either PCR or culture techniques.

Objetivo deste estudo foi verificar a influência do Iodofórmio no potencial antimicrobiano do hidróxido de cálcio. S. aureus, E. faecalis, P. aeruginosa, B. subtilis, C. albicans foram os indicadores biológicos. As substâncias testadas foram: hidróxido de cálcio + solução salina; hidróxido de cálcio + iodofórmio + solução salina; iodofórmio + solução salina. Para o teste de difusão em ágar, 18 placas de Petri contendo 20 ml de ágar BHI foram inoculadas com as suspensões microbianas. Cinqüenta e quatro cavidades foram feitas e preenchidas com as substâncias testadas. Os diâmetros da inibição microbiana foram então mensurados. No teste de exposição direta, 162 pontas de papel absorvente número 50 esterilizadas foram imersas nas suspensões experimentais por 5 minutos, e cobertas pelas pastas testadas. Em intervalos de 24, 48 e 72 horas, as pontas de papel foram imersas em 10 ml de Letheen Broth, seguido de incubação a 37°°C por 48 horas. O crescimento microbiano foi avaliado pela turvação do meio de cultura. Um inóculo de 0.1 ml obtido do Letheen Broth foi transferido para 7 ml de BHI, e incubado a 37°°C por 48h. o crescimento bacteriano foi novamente avaliado pela turvação do meio de cultura. As pastas contendo hidróxido de cálcio e solução salina, hidróxido de cálcio-iodofórmio e solução salina mostraram significativa atividade antimicrobiana nos métodos experimentais estudados. A pasta contendo iodofórmio e solução salina foi inefetiva pelo teste de difusão em agar e, também, por exposição direta, para o B. subtilis e a mistura.

The purpose of this research was to verify the influence of Iodoform on antimicrobial potential of calcium hydroxide. S. aureus, E. faecalis, P. aeruginosa, B. subtilis, C. albicans were the biological indicators. The substances tested were: calcium hydroxide + saline; calcium hydroxide + Iodoform + saline; Iodoform + saline. For the agar diffusion test, 18 Petri plates with 20 ml of BHI agar were inoculated with the microbial suspensions. Fifty-four cavities were made and filled with the substances tested. The diameters of microbial inhibition were then measured. In direct exposure test, 162 #50 sterile absorbent paper points were immersed in the experimental suspensions for 5 min, and covered with the pastes. At intervals of 24, 48 and 72 hours, the paper points were immersed in 10 ml of Letheen Broth, followed by incubation at 37°°C for 48h. Microbial growth was evaluated by turbidity of the culture medium. A 0.1 ml inoculum obtained from the Letheen Broth was transferred to 7 ml of BHI, and incubated at 37°°C for 48h. Bacterial growth was again evaluated by turbidity of the culture medium. The calcium hydroxide associated with the saline or the iodoform plus saline showed antimicrobial effectiveness in both experimental methods. The iodoform paste presented antimicrobial ineffectiveness for the agar diffusion test on all biological microorganisms and for the direct exposure test on B. subtilis and on the mixture.

O objetivo deste estudo foi avaliar a capacidade do ozônio associado a três diferentes soluções usadas em um sistema de limpeza ultra-sônica em inativar Staphylococcus aureus. Cento e vinte mL de suspensão com S. aureus foram misturadas em 6 L das soluções experimentais (água destilada esterilizada, vinagre de maça, e água destilada esterilizada + Endozime AWpluz) utilizadas no sistema de limpeza ultra-sônica. O ozônio foi produzido por descarga elétrica através de uma corrente de oxigênio com valor de 7g/h de ozônio (1,2%) dentro das suspensões microbianas. Um total de 10 mL de cada solução experimental foram coletados e realizadas cinco diluições em 9 mL de BHI e incubadas a 37°C por 48 h. O crescimento bacteriano foi avaliado pela turbidade do meio de cultura. Ao mesmo tempo, 1 mL das amostras bacterianas foram coletadas e inoculadas em placas contendo BHIA. Após o período de incubação a 37ºC por 48 h, realizou-se a contagem de unidades formadoras de colônias (ufc/mL). No teste de diluição em tubos com BHI e placas com BHIA (ufc/mL), quando o ozônio foi empregado, o crescimento bacteriano não foi observado em nenhuma das soluções experimentais. Nas condições deste estudo, a aplicação do ozônio nas soluções experimentais presentes no sistema de limpeza ultra-sônica mostrou atividade antibacteriana sobre S. aureus.

The aim of this study was to evaluate the antimicrobial potential of ozone applied to 3 different solutions in an ultrasonic cleaning system against Staphylococcus aureus. A total of 120 mL of S. aureus were mixed in 6 L of the experimental solutions (sterilie distilled water, vinegar and sterile distilled water + Endozime AWpluz) used in a ultrasonic cleaning system (UCS). Ozone was produced by an electric discharge through a current of oxygen and bubbling with flow rate at 7g/h ozone (1.2%) into the microbial suspensions. Ten mL of each experimental suspension were collected and 5 fold dilutions were made in 9 mL of BHI and incubated at 37°C for 48 h. Bacterial growth was evaluated by turbidity of the culture medium. At the same time, 1 mL of bacterial samples was collected and inoculated in BHIA plates. After incubation at 37°C for 48 h, the number of colony forming units (cfu) per mL on BHIA surface was counted. In dilution test in BHI tubes and in BHIA plates (cfu/mL), bacterial growth was not observed in any of the experimental solutions when ozone was added. Under the tested conditions, it may be concluded that the addition of ozone to a ultrasonic cleaning system containing different experimental solutions resulted in antibacterial activity against S. aureus.