ABSTRACT: Feathers are by-products that are generated in significant quantities by the poultry industry. Microbial bioconversion has been investigated as a promising strategy for the processing of feathers, since, along with the degradation of these keratinous materials, bioprocessing can result in value-added products. Thus, from the perspective of industrial microbiology, chicken feathers can be considered a raw material for obtaining microbial proteases. Within this context, this research investigated and characterized the production of extracellular proteases by Aspergillus sp., isolated from soil of the Amazon Rainforest. The enzymatic production was evaluated using several growth substrates (whole feathers, feather meal, human hair, casein, gelatin, peptone and chicken beaks). With highest enzyme production was obtained the feather meal (FM) and peptone. After 48 h of fermentation, FM degradation was 15.82%. The crude protease showed optimal activity at pH 5.0 and 37 °C and enzymatic activity was enhanced with the addition of 1 and 5 mM of CaCl2, MnSO4, KCl, MgSO4 and CuSO4. The detergents Tween 20 and Triton x-100, at concentrations 0.5 and 1% (v/v), tended to stimulate activity. The presence of 0.5 and 1% (v/v) of organic solvents (methanol, acetone, butanol, acetonitrile, isopropanol and DMSO), maintained the enzymatic activity. β-mercaptoethanolstimulated proteolytic activity in the enzymatic assays. This study suggested new direction for waste management with industrial applications giving rise to green technology for sustainable development.

RESUMO: As penas são subprodutos que são gerados em quantidades significativas pela indústria avícola. A bioconversão microbiana tem sido investigada como uma estratégia promissora para o processamento de penas, uma vez que, juntamente com a degradação desses materiais queratinosos, o bioprocessamento pode resultar em produtos de valor agregado. Assim, do ponto de vista da microbiologia industrial, as penas de frango podem ser consideradas matéria-prima para a obtenção de proteases microbianas. Dentro deste contexto, o objetivo deste trabalho foi investigar e caracterizar a produção de proteases extracelulares por Aspergillus sp., isolados de solo da floresta Amazônica. A produção enzimática foi avaliada utilizando diversos substratos de crescimento (penas inteiras, farinha de penas, cabelo humano, caseína, gelatina, peptona e bicos de frango). Com maior produção de enzima foi obtida a farinha de penas (FP) e peptona. Após 48 h de fermentação, a degradação da FP foi de 15.82%. A protease bruta mostrou atividade ótima em pH 5.0 e 37 0C e a atividade enzimática foi aumentada com a adição de 1 e 5 mM de CaCl2, MnSO4, KCl, MgSO4 e CuSO4. Os detergentes Tween 20 e Triton x-100, nas concentrações 0.5 e 1% (v/v), tenderam a estimular a atividade. A presença de 0.5 e 1% (v/v) dos solventes orgânicos (metanol, acetona, butanol, acetonitrila, isopropanol e DMSO), mantiveram a atividade enzimática. O β-mercaptoetanol estimulou a atividade proteolítica nos ensaios enzimáticos. Este estudo sugere uma nova direção para a gestão de resíduos com aplicações industriais dando origem à tecnologia verde para o desenvolvimento sustentável.

Abstract The effects of melatonin application by itself and mixed with sucrose solution on vase life and physicochemical changes in amaryllis cut flowers were investigated. Amaryllis stems with flower buds at harvest points were placed into vases containing different maintenance solutions: Melatonin (Mt; 0.01 mM), Sucrose (Suc; 4%), Melatonin + Sucrose (Mt + Suc; 0.01 mM + 4%) and distilled water (Control). Each treatment consisted of five repetitions, with one inflorescence stem per vase. The vases remained at 22 ± 3 °C and constant lighting of 13 µmol m-2 s-1 for 14 days. Immersion of stems in Suc or Mt + Suc delayed the initial senescence processes of the amaryllis cut flower. Vase life was prolonged for additional 2 days compared to stems immersed in water (control), increasing from 10 to 12 days of conservation. Floral stem mass was kept more stable; the degradation of anthocyanin and flavonoid pigments was delayed; and the stability of phenolic compounds and total carbohydrates was maintained for 14 days. These findings confirm the role of melatonin as a preservative in cut flowers. However, its preservative effect was potentialized by the addition of sucrose to the water of the amaryllis cut flowers. More work needs to be carried out to investigate the physiological mechanisms promoted by the interaction of melatonin and sucrose in the regulation of senescence in amaryllis cut flowers, including the analysis of gene expression and activity of the antioxidant system.

Resumo O presente trabalho investigou os efeitos da aplicação de melatonina individualmente e misturada com solução de sacarose na vida de vaso e nas alterações físico-químicas de flores de corte de amarílis. Hastes de amarilis com botões florais em pontos de colheita foram colocadas em vasos contendo diferentes soluções de manutenção: Melatonina (Mt; 0,01 mM), Sacarose (Suc; 4%), Melatonina + Sacarose (Mt + Suc; 0,01 mM + 4%) e Água destilada (Controle). Cada tratamento constou de 5 repetições, sendo uma haste de inflorescência por vaso. Os vasos permaneceram a 22 ± 3° C e iluminação constante de 13 µmol m-2.s-1 durante 14 dias. A imersão das hastes em Suc ou Mt + Suc retardou os processos iniciais de senescência de flor de corte de amarílis, prolongando por mais 2 dias sua vida de vaso, em relação às hastes sem uso desses conservantes (controle). Aumentando de 10 para 12 dias de conservação. Pois mantiveram mais estáveis a massa fresca, retardaram a degradação de pigmentos antocianinas e flavonoides, bem como, mantendo a estabilidade dos compostos fenólicos e carboidratos totais ao final de 14 dias. Esses achados confirmam o papel da melatonina como conservante de flores de corte. Todavia, o seu efeito conservante foi potencializado em amarílis, associado à sacarose. Mais trabalhos necessitam ser realizados para investigar mais profundamente quais mecanismos fisiológicos promovidos pela interação melatonina e sacarose na regulação da senescência das flores de amarilis cortadas, incluindo análise de expressão de genes e atividade do sistema antioxidante.

Abstract: This work aimed to evaluate the physical-mechanical properties of Pinus oocarpa wood agglomerated panels produced with different levels (0 %, 25 %, 50 %, 75 % and 100 %) of wood replacement with bean residues. For this purpose, Pinus oocarpa wood and the agricultural residue were reduced into particles and their properties of apparent density, extractives, lignin and ash content of these raw materials were determined. Then, the particles were dried to a 3 % humidity and granulometrically selected to produce panels with a density of 0,60 g/cm3. These particles were bonded using 12 % urea-formaldehyde adhesive, pressed, following normative dimensions (250 mm x 250 mm x 15 mm (width, length, and thickness)), and kept in a climate-controlled environment (20 ºC ± 2 ºC and 65 % ± 5 % RH) until the physical and mechanical tests were carried out. The research results indicated that the particles from bean residues in comparison with Pinus oocarpa wood, presented low density, lignin and holocellulose values, and higher extractives data. Furthermore, regarding the characterization of the panels, there was a trend towards uniformity in the apparent density values, an increase in the properties of compact ratio, water absorption and thickness swelling, and a decrease in their mechanical properties associated with the increase in the by-product addition to the panels. Therefore, new studies are necessary, seeking a larger study and greater knowledge of the addition effects of bean residues in particulate panels, aiming the dissemination of this sustainable process on large scale.

ABSTRACT Despite the increasing use of plaster as a construction material, due to its numerous advantages when compared to cement, its use is still restricted, because of its low mechanical resistance and high solubility in water. In this context, research has been carried out related to the addition of nanomaterials to improve the mechanical and physical properties of plaster in civil construction. A highly available, low-cost nanomaterial with excellent properties is nanotalc. In this work, nanocomposites with dimensions of 40 × 40 × 160 mm were produced with ultrafine micronized nanotalc replacing plaster in proportions of 0%; 0.5%; 1%; 1.5% and 2%. The physical and mechanical properties of the nanocomposites were evaluated according to standards. The nanocomposites produced with 1% nanotalc showed satisfactory results for physical and mechanical properties, with an increase of 1.8% in apparent density and 24.12% in compressive strength, and a decrease in water absorption of 6.23%, compared to the composite without the incorporation of nanotalc. The production of nanocomposites with the incorporation of 1% nanotalc is viable and shown to be promising, presenting potential for application as linings and internal partitions, since they showed low water absorption due to the hydrophobicity of nanotalc.

Dental trauma is a public health problem because of its high prevalence rates and treatment costs and for affecting mainly younger individuals. Aim This cross-sectional study aimed to investigate the variables associated with dental trauma and its influence on oral health-related quality of life among 7th-grade students of public elementary schools. Methods The data was collected with semi-structured and self-administered questionnaires and an intraoral clinical examination (n = 204). The variables collected regarded dental trauma, lip coverage, overjet, oral health-related quality of life (Child Perceptions Questionnaire - CPQ11-14 ISF: 8), and sociodemographic profile. Association tests and the Mann-Whitney test were performed at a 5% significance level. Results Dental trauma occurred in 12.3% of students, 94.6% had adequate lip coverage, and the mean overjet was 2.7 mm (±2.0). Sex was the only variable with a statistically significant association with dental trauma (p = 0.021). There was no statistically significant difference in the CPQ11-14 ISF: 8 score between students with and without dental trauma (p = 0.136). Conclusions Dental trauma was significantly associated with sex and did not impact the oral health-related quality of life of the students.

ABSTRACT Purpose: To evaluate the viability of the porcine vas deferens as a realistic microsurgical training model for vasectomy reversal Methods: The model uses swine testicles (vas deferent), which are usually discarded in large street markets since they are not part of Brazilian cuisine. The spermatic cord was carefully dissected, and the vas deferens were isolated, measuring 10 cm in length. A paper quadrilateral with 5 cm2 was built to delimit the surgical training field. The objective of the model is to simulate only the microsurgical step when the vas deferens are already isolated. The parameters analyzed were: feasibility for reproducing the technique, patency before and after performing the vasovasostomy, cost of the model, ease of acquisition, ease of handling, execution time, and model reproducibility. Results: The simulator presented low cost. All models made were viable with a texture similar to human, with positive patency obtained in 100% of the procedures. The internal and external diameters of the vas deferens varied between 0.2-0.4 mm and 2-3 mm, respectively, with a mean length of 9 ± 1.2 cm. The total procedure time was 43.28 ± 3.22 minutes. Conclusions: The realistic model presented proved to be viable for carrying out vasectomy reversal training, due to its low cost, easy acquisition, and easy handling, and providing similar tissue characteristics to humans.

Resumo Coarctação da aorta abdominal é uma causa rara de claudicação de membros inferiores e hipertensão refratária. O tratamento é complexo e exige conhecimento de diversas técnicas de reconstrução vascular. Apresentamos um caso de coarctação ao nível das artérias renais, seu tratamento e revisão da literatura. Paciente feminina, 65 anos, com hipertensão refratária desde os 35 anos, utilizando cinco medicações anti-hipertensivas em dose máxima. Pressão arterial média de 260/180mmHg e claudicação incapacitante (menos de 20 metros) bilateral. Angiotomografia computadorizada demonstrou coarctação de aorta justarrenal de 4 mm de maior diâmetro, calcificação circunferencial no local da estenose e tortuosidade da aorta infrarrenal. Foi submetida a tratamento híbrido, com ponte ilíaco-birrenal e implante de stent Advanta V12 no local da estenose. A paciente evoluiu satisfatoriamente e, 60 dias depois da cirurgia, apresentava-se com uma pressão arterial de 140/80mmHg, em uso de apenas duas medicações anti-hipertensivas e sem claudicação.

Abstract Coarctation of the abdominal aorta is a rare etiology of intermittent claudication and refractory hypertension. Treatment is complex and requires knowledge of several vascular reconstruction techniques. We report a case of aortic coarctation at the level of the renal arteries, describing its treatment and presenting a literature review. Female patient, 65 years old, with refractory hypertension since the age of 35, using five antihypertensive medications at maximum doses. Blood pressure was 260/180mmHg and she had disabling claudication (less than 20 meters). Computed tomography angiography showed a 4mm coarctation in the juxtarenal aorta, with circumferential calcification at the stenosis site, and tortuous infrarenal aorta. Hybrid repair was performed with an iliac-birenal bypass and implantation of an Advanta V12 stent at the stenosis site. The patient’s postoperative course was satisfactory, she was free from claudication, and her blood pressure 60 days after surgery was 140/80mmHg, taking two antihypertensive medications.

Resumo Contexto A aferição do diâmetro venoso e a escolha de um filtro de veia cava compatível são fundamentais para diminuir o risco de complicações decorrentes do implante desses dispositivos. Entretanto, são escassas as informações sobre como o diâmetro da cava inferior varia de acordo com o sexo e a idade. Objetivos Determinar a influência do sexo e da idade dos pacientes sobre o diâmetro da cava inferior e a adequação dos diferentes modelos de filtro disponíveis. Métodos Estudo analítico retrospectivo, realizado a partir de imagens de tomografia computadorizada. O diâmetro no segmento infrarrenal da veia cava inferior foi aferido em três pontos (cranial, médio e caudal). Os resultados foram classificados de acordo com o sexo e as faixas etárias. Resultados Foram analisadas tomografias de 417 pacientes: 245 mulheres e 172 homens. Os diâmetros nos pontos médio e caudal foram, respectivamente, 19,1 mm e 20,6 mm em mulheres de 81 a 92 anos, sendo estatisticamente menores (p < 0,05) quando comparados aos de mulheres com idade entre 19 e 40 anos (diâmetro no ponto médio: 22,7 mm; diâmetro no ponto caudal: 23 mm). Resultados semelhantes foram observados em homens. Os diâmetros venosos nos pontos cranial e caudal foram estatisticamente maiores em homens (ponto cranial: 24,4 mm; ponto caudal: 22,3 mm) do que em mulheres (ponto cranial: 22,6 mm; ponto caudal: 20,8 mm) em pacientes com idade entre 51 e 70 anos (p < 0,05). Conclusões O diâmetro da veia cava inferior foi menor em pacientes com idade mais avançada em ambos os sexos, e a taxa de variação do diâmetro foi semelhante entre homens e mulheres.

Abstract Background Measuring the venous diameter and choosing a compatible vena cava filter are essential to reduce the risk of complications resulting from implantation of these devices. However, there is little information on how the diameter of the inferior vena cava varies with sex and age. Objectives To determine the influence of patients’ gender and age on their inferior vena cava diameter and the suitability of the different models of available filters. Methods Retrospective analytical study based on computed tomography images. The diameter of the inferior vena cava was measured at 3 points: above the confluence of the common iliac veins, below the renal veins, and midway between these two points (cranial point, caudal point, and midpoint) using Arya® and Carestream PACS® software. The results were classified by sex and age groups. Results CT scans of 417 patients were analyzed: 245 women and 172 men. The diameters at the midpoint and caudal point were, respectively, 19.1 mm and 20.6 mm in women from 81 to 92 years old and were statistically smaller (p< 0.05) when compared to women aged 19 to 40 years (midpoint: 22.7 mm; caudal point: 23 mm). Similar results were seen in men. Venous diameters at the cranial and caudal points in patients aged from 51 to 70 years were statistically larger in men (cranial point: 24.4 mm; caudal point:22.3 mm) than in women (cranial point: 22.6 mm; caudal point:20.8 mm) (p< 0.05). Conclusions A smaller diameter was found for the inferior vena cava in older patients of both sexes and the rate of diameter change was similar among men and women.

Abstract Biofilms are important to the virulence of human pathogenic fungi, and some molecules have been found to play key roles in the growth and regulation of fungal biofilms. Farnesol, one of these molecules, is well-described for some microorganisms but is still scarcely known for Rhodotorula spp. This study aimed to evaluate the influence of farnesol on the biofilm of R. mucilaginosa. Initially, screening with 0.2 mM to 2.1 mM of farnesol was evaluated against planktonic forms. A concentration of this compound was then chosen and evaluated for its effect on biofilm in formation and on preformed biofilm after 24, 48 and 72 hours. The impact of farnesol was evaluated by colony-forming units (CFU) counts, determination of metabolic activity and quantification of total biomass. In the presence of 0.9 mM, farnesol was able to decrease the CFU number, at 48 hours, when the biofilm was in formation, although it did not affect the preformed biofilms. Thus, our results show that farnesol exerts a modulating activity during biofilm formation for R. mucilaginosa, with this compound reducing the metabolic activity and total biomass of the biofilms.

Abstract This study evaluate the maxillary anterior teeth anatomy by micro-computed tomography (μCT), about relevant characteristic for endodontic treatment planning. Fifty maxillary central incisors (MCI), lateral incisors (MLI) and maxillary canines (MC) were scanned using a μCT device. Two and three-dimensional parameters at 1 to 5mm distance to the apical foramen, external anatomic characteristics of the teeth and qualitative analysis of the internal anatomy was performed. The roundness and form factor values revealed a circular canal in the apical third in the MCI and MC, whereas MLI showed flattening in the apical third. The linear regression test indicated a progressive increase in the major/minor diameters in the five mm assessed (p < 0.001). The 3D analysis revealed the greatest volume and surface area in MC. The SMI showed a cylindrical geometry of root canals. All teeth presented Vertucci’s type I root canal configuration. A mild curvature was prevalent in the MCI (45%) and a moderate one in the MLI (50%) and MC (50%). Palatal shoulder volume was smaller in the MLI (11.46 ± 3.09) than in the MCI (14.15 ± 3.85) and MC (13.95 ± 2.55). The most common exit of main apical foramen was in a central (22%), distolingual (30%) and mesiobuccal position (28%) for MCI, MLI and MC, respectively. Radicular grooves were observed in 2% of MCI and 4% of MLI. Two and three-dimensional data obtained by μCT allowed to observe morphological characteristics of internal/external anatomy of the maxillary anterior teeth. These characteristics may affect the endodontic treatment planning.

Resumo O objetivo neste estudo foi avaliar a influência de diferentes instrumentos e mecanismos de agitação da solução irrigadora na penetração e resistência de união (RU) do AH Plus à dentina. Pré molares humanos foram distribuídos em dois grupos experimentais (n=30), de acordo com o sistema de instrumentação: ProTaper Next (PN) ou XP-endo Shaper (XS) e de acordo com três protocolos de irrigação (n=10): NaviTip (Nv), XP-endo Finisher (XF), passive ultrasonic irrigation/ XP-endo Finisher (PUIXF). A irrigação do canal radicular foi realizada com NaOCl 2,5% e EDTA 17%. A obturação foi realizada por meio da técnica da condensação lateral, com AH Plus acrescido de rodhamina B 0,1%. As raízes foram seccionadas, obtendo-se 2 slices de 2,0 mm para cada terço radicular. O primeiro slice foi submetido a análise da penetração do cimento e ao teste de push-out e o segundo slice submetido a MEV para análise da interface de união. Para penetração (%) Tukey evidenciou que PNXF (82,38±13,48), PNPUIXF (82,48±12,02), XSXF (82,24±11,28) e XSPUIXF (86,23±10,45) apresentaram os maiores valores, diferentes (p<0,05) de PNC (68,29±15,12) e XPSC (71,41±16,50). Na RU (MPa) foi evidenciado que PNPF (4,92±1,04) e XPSPF (5,03±0,70), no terço cervical, obtiveram os maiores valores diferentes dos demais (p<0,05). MCVL e MEV evidenciaram maior penetração do cimento em toda extensão da parede do canal radicular inclusive nas regiões polares, quando foi realizada a agitação da solução irrigadora. Concluiu-se que a associação PUI e XP-endo Finisher favoreceu a penetração e resistência de união do material obturador à dentina radicular.

Abstract The aim of this study was to evaluate the influence of different instruments and mechanisms of agitation of the irrigating solution on the penetration by confocal laser scanning microscopy (CLSM), and the bond strength (BS) of the filling material to the dentin by push-out test. Human premolars were distributed in two experimental groups (n=30), according to the instrumentation system: ProTaper Next (PN) or XP-endo Shaper (XS) and three irrigation protocol (n=10): NaviTip (Nv), XP-endo Finisher (XF), passive ultrasonic irrigation/ XP-endo Finisher (PUIXF). The 2.5% NaOCl and 17% EDTA were the irrigating solutions used. The filling was performed using a lateral condensation technique, with AH Plus added to 0.1% rodhamine B. The roots were sectioned, obtaining 2 slices for each third of the root. The first slice was submitted to the sealer penetration analysis and the push-out test. The second slice was submitted to qualitative analysis (SEM) of the union interface. For the penetration (%) Tukey showed that PNXF (82.38±13.48), PNPUIXF (82.48± 12.02), XSXF (82.24±11.28) and XSPUIXP (86.23±10.45) presented the highest values, different (p<0.05) from PNNv (68.29±15.12) and XSNv (71.41±16.50). The BS (MPa) test evidenced that in the cervical third, PNPF (4.92±1.04) and XPSPF (5.03±0.70) obtained the highest values differing from the others groups (p<0.05). CSLM and SEM showed greater penetration of the sealer on the entire length of the root canal when the irrigation solution was stirred. In conclusion that the association PUI and XP-endo Finisher favored the penetration and bond strength of the filling material to the root dentin.

Resumo Objetivo A capacidade das macrófitas, para colonizar grandes áreas é frequentemente relatada como dependente do investimento no sistema radicular e a sua capacidade para absorver nutrientes. Este trabalho teve como objetivo avaliar os efeitos do fósforo no crescimento da raiz, na anatomia radicular e na sua capacidade de absorver este nutriente pela macrófita aquática Typha domingensis. Metodologia As plantas foram cultivadas por 60 dias em solução nutritiva contendo 0, 0,2, 0,4, 0,6 ou 0,8 mM de fósforo. Ao final do experimento, o comprimento e conteúdo de P da raiz bem como a sua anatomia nas regiões de maturação e meristemática foram avaliados. Resultados Maiores concentrações de P aumentaram a absorção deste nutriente bem como a massa seca das plantas. Contudo o comprimento da raiz foi reduzido pelas maiores concentrações de fósforo. Além disso, maiores concentrações de P aumentaram a proporção da coifa e reduziram a proporção de procâmbio na zona meristemática. Ademais, maiores concentrações de fósforo reduziram o diâmetro dos vasos de xilema e a proporção do cilindro vascular na zona de maturação apesar de uma maior proporção de floema ter sido observada nestas condições. A espessura da endoderme e a exoderme bem como a proporção de aerênquima foram reduzidas pelas maiores concentrações de fósforo. Conclusões Portanto, a exigência de fósforo de T. domingensis é atingida sob 0,4 mM deste nutriente e condições hipertróficas promovem o desenvolvimento de características desfavoráveis na anatomia e um menor crescimento radicular.

Abstract Aim The capacity of macrophytes to colonize large areas is often referred to as dependent of the investment in root system and its capacity to uptake nutrients. This work aimed to evaluate the phosphorus (P) effects on the root growth and anatomy as well as its capacity to uptake this nutrient by the aquatic macrophyte Typha domingensis. Methods Plants were grown for 60 days in nutrient solution containing 0, 0.2, 0.4, 0.6 or 0.8 mM of phosphorus. At the end of the experiment, the root length and P root content as well as the root anatomy at the maturation and meristematic zones were evaluated. Results Higher P concentrations increased the uptake of this nutrient and plant dry mass. However, the root length was reduced by higher phosphorus levels. In addition, P increased the proportion of the root cap while reduced the proportion of the procambium at the meristematic zone. Higher phosphorus concentrations reduced the xylem vessel diameter and the proportion of the vascular cylinder at the maturation zone, whereas increased phloem proportion was observed under this condition. Furthermore, higher phosphorus levels reduced the endodermis and exodermis thickness as well as the aerenchyma proportion. Conclusions Therefore, the T. domingensis P requirement is fulfilled at 0.4 mM of this nutrient and hypertrophic conditions promote the development of unfavorable root anatomical traits and reduction of the root growth.

Abstract The presence of a tooth-surface defect, such as a non-carious cervical lesion (NCCL), associated with sites of gingival recession (GR) defects creates a combined soft tissue/tooth defect (CD) that requires a different treatment plan. This study aimed to critically review the literature regarding the available treatment protocols for CDs and suggest a new decision-making process. NCCLs were classified as Class A-: the cementoenamel junction (CEJ) was visible and the root surface discrepancy was < 0.5 mm (no step); Class A+: CEJ was visible and the root surface discrepancy was > 0.5 mm (with a step); Class B-: unidentifiable CEJ without a step; Class B+: unidentifiable CEJ with a step. NCCLs affecting both root and crown surfaces (Class B) lead to CEJ destruction and consequently eliminate an important landmark used before and after root coverage procedures. The depth of the root surface discrepancy is vital owing to its possible impact on soft tissue adaptation after healing, which, in turn, may influence the treatment options, namely the use of graft and/or composites to compensate for the discrepancy. Clinically, a step with horizontal depth greater than 0.5 mm should be recognized as the minimum threshold value to define this condition. Extremely deep defects tend to assume a V-shaped topography. Therefore, extremely deep V-shaped defects were classified into subclasses A+V, a V-shaped defect, and B+V, a V-shaped defect with loss of CEJ, for management considerations. The treatment options, supported by the literature, and a decision-making process to deal with each condition are presented.

resumo: A norma brasileira de alvenaria estrutural considera para a tensão máxima de tração das armaduras (fs) embutida no graute em blocos cerâmicos com superfícies lisas vários limites da tensão de escoamento do aço (fyk). Este trabalho teve como principal objetivo analisar os limites da tensão de escoamento das armaduras inseridas na alvenaria estrutural de blocos cerâmicos por meio de análises numéricas e paramétricas em corpos de provas push-out e pull-out, variando o tipo de graute e diâmetro das armaduras. O estudo numérico dos modelos analisados foi feito pelo Método dos Elementos Finitos utilizando o pacote computacional FX+DIANA®. A análise paramétrica confirmou que os limites obtidos nesta pesquisa para armaduras com diâmetros de 8 mm, 10 mm, 12.5 mm e 16 mm estão em concordância com os especificados pela norma brasileira, com exceção da armadura de 20 mm de diâmetro, cujo limite ficou menor que o apontado pela norma. Dessa maneira, a tensão de escoamento da armadura embebida no graute diminui progressivamente com o aumento do diâmetro das barras, sendo a falha dominada pela tensão de aderência da interface que se cria entre as paredes dos blocos cerâmicos e o graute.

abstract: The Brazilian Standard Structural Masonry considers for the maximum tensile stress (fs) of the reinforcements embedded in the grout in clay blocks with smooth surfaces several limits of the yield stress for the reinforcement (fyk). This work aims to analyze the limits of the yield stress of reinforcement bars in clay block masonry structures by numerical and parametric analysis in push-out and pull-out tests, varying the type of grout and reinforcement diameter. A numerical study was performed using a 3D-model with the DIANA® software based on the Finite Element Method. The parametric study confirmed that the limits obtained in this research for reinforcement diameter of 8 mm, 10 mm, 12.5 mm and 16 mm are in agreement with the limits specified by the Brazilian Standard, with exception of the 20 mm diameter, which limit was lower than indicated by the Standard. The tensile stress limits of the embedded reinforcement progressively reduce with increasing rebar diameter, being the failure is dominated by the bond strength of the block/grout interface.

ABSTRACT The objective of this study was to compare the antimicrobial activity of macrophages and serum in laying hen (MM, CC, and CCc) and broiler chicken lineages (TT and LL). Macrophages were evaluated for phagocytic and antimicrobial activity. Microbicidal serum activity was evaluated by the resistance test for serum and the agar test. The results showed that phagocytic activity was higher in males of the MM strain, with 13% of macrophages presenting phagocytosis, while the other lineages studied, and even female MM, presented a rate of 6% of phagocytic cells. However, antimicrobial activity in macrophages from males of CCc lineage and females of TT lineage were higher, eliminating more than 30% of the Salmonella enterica inoculum, while in the other strains, the results were similar, with inoculum reduction below 30%. In the serum resistance assay, female laying lines presented higher antibacterial activity than female broiler lines. In the trials to evaluate the microbicide activity of the serum, females of both broiler and laying lineages presented higher performance when compared with males of the same lineage. Females of laying hen lines (MM and CC) present a greater antibacterium activity than males. These results can contribute to a better understanding of the immune response in broiler chicken and laying hen lineages, to aid development of lineages of birds more resistant to pathogens.