RESUMEN: Se realizó un estudio sobre la relación entre el valor de la Unidad Hounsfield (HU) de corte único del húmero proximal chino y la densidad mineral ósea (DMO) mediante TC de tórax de rutina y absorciometría de rayos X de energía dual (DEXA). Se recopilaron datos de 240 personas que se sometieron a DEXA y tomografías computarizadas de rutina de tórax (incluidas imágenes completas del húmero proximal) el mismo día en 967 hospitales entre enero de 2019 y diciembre de 2021. El método para medir los valores de HU de un solo corte del húmero proximal en las tomografías computarizadas de tórax mostraron alta confiabilidad y repetibilidad (coeficiente de correlación intraclase > 0,961, P < 0,001). Se observó una fuerte correlación positiva entre los valores de HU de un solo corte del húmero proximal y los resultados de DEXA, demostrando el valor de HU de 20 mm la correlación más alta. En diferentes grupos de IMC, el área bajo la curva (AUC) para el valor HU de 20 mm fue consistentemente el más grande (AUC = 0,701-0,813, P <0,05). Por lo tanto, el valor de HU de 20 mm puede considerarse una referencia fiable para el cribado oportunista de DMO baja, con valores de referencia de -4 HU para personas con bajo peso, -13 HU para personas con peso normal, -7 HU para personas con sobrepeso y -16 HU para personas obesas. Los valores por debajo de estos umbrales indican un riesgo de DMO baja. Este estudio es un aporte para los datos chinos sobre la DMO y ofrece un enfoque rápido y eficaz para detectar de forma oportunista la DMO baja.

SUMMARY: A Study on Relationship between Single-Slice Hounsfield Unit(HU) value of the Chinese proximal humerus and Bone Mineral Density(BMD) Using Routine Chest CT and Dual-energy X-ray Absorptiometry(DEXA) was performed. Data were collected from 240 individuals who underwent DEXA and routine chest CT scans (including full images of the proximal humerus) on the same day at 967 Hospitals between January 2019 and December 2021. The method of measuring single-slice HU values of the proximal humerus on routine chest CT scans exhibited high reliability and repeatability (intraclass correlation coefficient > 0.961, P < 0.001). A strong positive correlation was observed between single-slice HU values of the proximal humerus and DEXA results, with the 20-mm HU value demonstrating the highest correlation. Across different BMI groups, the Area Under Curve (AUC) for the 20-mm HU value was consistently the largest (AUC=0.701- 0.813, P< 0.05). Therefore, the 20-mm HU value can be considered a reliable reference for the opportunistic screening of low BMD, with reference values of -4HU for underweight individuals, -13HU for normal weight individuals, -7HU for overweight individuals, and -16HU for obese individuals. Values below these thresholds indicate a risk of low BMD. This study enriches the Chinese BMD data and offers a swift and effective approach for opportunistically screening low BMD.

ABSTRACT Land-use effectiveness can be ensured by utilizing GIS and geostatistical tools in conjunction with land assessment methods to prevent soil erosion and salinization. This study employs a GIS-based LESA methodology, combined with geostatistics, to evaluate the land’s capacity to produce agricultural crops on calcareous soils. Land Evaluation for Agricultural Uses (LESA) key components are site assessment and land evaluation, with the former being non-soil-dependent and the latter being soil-dependent. Geostatical kriging was used to interpolate and generalize a GIS map of land capability. The study found that 27.88, 47.94, 18.76, and 5.41 % of the study area were unsuitable for crop farming, marginally suitable, moderately suitable, and highly suitable, respectively. Our research demonstrates that a flexible GIS framework can assist decision-makers in more accurately assessing land resources, including unsuitable, marginally-suitable, and reforested lands. Landuse use salinization GISbased based methodology geostatistics lands s soils (LESA evaluation nonsoildependent non dependent soildependent. soildependent dependent. soil-dependent capability 2788 27 88 27.88 4794 47 94 47.94 1876 18 76 18.76 541 5 41 5.4 farming suitable respectively decisionmakers decision makers resources marginallysuitable, marginallysuitable marginally-suitable 278 2 8 27.8 479 4 9 47.9 187 1 7 18.7 54 5. 27. 47. 18.

Rapid recognition of the sources of drugs can provide some valuable clues and the basis for determining the nature of the case. A novel recognition method was put forward to identify the sources of heroin drugs rapidly and non-destructively by using a hand-held near infrared (NIR) spectrometer and a multi-layer-extreme learning machine (ML-ELM) algorithm. In contrast to traditional linear discriminant analysis (LDA), support vector machine (SVM) and extreme learning machine (ELM) algorithms, the accuracy, sensitivity and specificity were the highest for the proposed ML-ELM algorithm. The prediction accuracy of the ML-ELM algorithm was 25.33, 20.00, 17.33% higher than that of LDA, SVM and ELM algorithm, respectively, for 4 cases. The ML-ELM models for recognizing the different sources of heroin drugs had the best generalization ability and prediction results. The experimental results indicated that the combination of the hand held NIR technology and ML-ELM algorithm can recognize the different sources of heroin drugs rapidly, accurately, and non-destructively on the spot. case nondestructively non destructively handheld (NIR multilayerextreme multi layer MLELM ML (ML-ELM LDA , (LDA) (SVM (ELM algorithms 2533 25 33 25.33 2000 20 00 20.00 1733 17 17.33 respectively cases accurately spot (LDA 253 2 3 25.3 200 0 20.0 173 1 17.3 25. 20. 17.

ABSTRACT China's socialized service industry of agricultural machinery emerged as the times required, which resolved the institutional contradiction between small farm households and large-scale agriculture. However, as cross-operation harvesters are still monitored based on phone calls, the monitoring efficiency and real-time performance are relatively poor. To improve the dynamic monitoring accuracy of harvester working areas, we proposed a working progress monitoring method based on harvester traveling trajectory and header status identification. The position and gap bridge angle information of harvesters was synchronously acquired in real-time. The height of the header above ground was calculated to determine whether the harvester was harvesting on a valid trajectory. Finally, the valid trajectory of the harvester was selected for area calculation. Field experiments showed that the header heights at the working and non-working tracing points collected by the system were discretely distributed at intervals of [0m, 0.5m] and (0.5m, 2m), respectively. The working progress monitoring algorithm proposed in this paper effectively improved the monitoring accuracy of harvester working areas. The mean error between the working areas calculated with identifying the header status and the actual cultivated land area in the five test plots was 0.09 hm2, with a mean error rate of 3.10%, 8.59% lower than that without identifying the harvester header status. Chinas China s required largescale large scale agriculture However crossoperation cross operation calls realtime real time poor identification realtime. time. Finally calculation nonworking non 0m, 0m m [0m 0.5m 05m 0 5m 0.5m, (0.5m 2m, 2m , 2m) respectively 009 09 0.0 hm2 hm 310 3 10 3.10% 859 8 59 8.59 00 0. 31 1 3.10 85 5 8.5 3.1 8. 3.

RESUMEN Introducción: La reconstrucción artroscópica interna total del ligamento cruzado anterior es una de las nuevas tecnologías de los últimos años. La principal ventaja es la necesidad de un solo tendón para el procedimiento quirúrgico. Objetivo: Comparar los efectos clínicos de la técnica interna total y la técnica tradicional en la reconstrucción del ligamento cruzado anterior. Métodos: Desde enero de 2019 hasta enero de 2022, se analizaron retrospectivamente los datos clínicos de 45 pacientes con reconstrucción del ligamento cruzado anterior, incluidos 32 hombres y 13 mujeres, de entre 18 y 33 años, con una media de 24,2 ± 3,3 años. Se realizó una reconstrucción interna total en 22 casos (grupo interno total) y una reconstrucción tradicional en 23 casos (grupo tradicional). Se registraron y compararon el momento de la lesión, la duración del procedimiento quirúrgico, la puntuación postoperatoria de la VAS y la recuperación de la función de la rodilla de los dos grupos. Se utilizaron el Comité Internacional de Literatura sobre la Rodilla (IKDC) y el sistema de puntuación de Lysholm para evaluar la eficacia clínica. Resultados: 45 pacientes fueron seguidos durante 14 a 18 meses, con una media de (15,4 ± 1,3) meses. No hubo diferencias significativas entre los dos grupos en cuanto al tiempo transcurrido entre la operación y la lesión, la duración de la operación, la puntuación IKDC y Lysholm de la rodilla afectada en el último seguimiento. Sin embargo, hubo diferencias significativas en la puntuación de la VAS al primer día, al tercer día, al séptimo día, a las dos semanas y al mes después de la operación (p < 0,05), sin que hubiera diferencias significativas a los tres meses, a los seis meses y al año después de la operación. Conclusión: El efecto de la reconstrucción interna total del ligamento cruzado anterior es equivalente al de los métodos tradicionales, con menos dolor postoperatorio, lo que la convierte en la opción ideal para este tratamiento. Nivel de evidencia II; Estudios terapéuticos - investigación de los resultados del tratamiento. Introducción años quirúrgico Objetivo Métodos 201 2022 4 3 1 mujeres 242 24 2 24, 3, grupo tradicional. . tradicional) lesión (IKDC clínica Resultados 15,4 154 15 (15, 1,3 seguimiento embargo día p 0,05, 005 0,05 , 0 05 0,05) Conclusión tradicionales postoperatorio tratamiento II 20 202 15, (15 1, 00 0,0 (1 0, (

RESUMO Introdução: A reconstrução artroscópica interna total do ligamento cruzado anterior é uma das novas tecnologias dos últimos anos. A principal vantagem é a necessidade de apenas um tendão para o procedimento cirúrgico. Objetivo: Comparar os efeitos clínicos da técnica interna total e da técnica tradicional na reconstrução do ligamento cruzado anterior. Métodos: Entre janeiro de 2019 a janeiro de 2022, os dados clínicos de 45 pacientes com reconstrução do ligamento cruzado anterior foram analisados retrospectivamente, incluindo 32 homens e 13 mulheres, com idades entre 18-33 anos, média de 24,2 ± 3,3 anos. A reconstrução interna total foi realizada em 22 casos (grupo interno total) e a reconstrução tradicional em 23 casos (grupo tradicional). O tempo da lesão, duração do procedimento cirúrgico, escore de VAS pós-operatório e recuperação da função do joelho dos dois grupos foram registrados e comparados. O Comitê Internacional de Literatura de Joelho (IKDC) e o sistema de pontuação de Lysholm foram utilizados para avaliar a eficácia clínica. Resultados: 45 pacientes foram acompanhados durante 14 a 18 meses, média de (15,4 ± 1,3) meses. Não houve diferença significativa entre os dois grupos no tempo entre a operação e a lesão, a duração da operação, a pontuação do IKDC e Lysholm do joelho afetado no último acompanhamento. Porém, houveram diferenças significativas na pontuação do VAS no primeiro dia, terceiro dia, sétimo dia, duas semanas e um mês após a operação (P < 0,05), sem diferença significativa em três meses, seis meses e um ano após a operação. Conclusão: O efeito da reconstrução interna total do ligamento cruzado anterior é equivalente ao dos métodos tradicionais, com menor dor pós-operatória, sendo a escolha ideal para esse tratamento. Nível de evidência II; Estudos terapêuticos - investigação dos resultados do tratamento. Introdução anos cirúrgico Objetivo Métodos 201 2022 4 retrospectivamente 3 1 mulheres 1833 33 18-3 242 24 2 24, 3, grupo tradicional. . tradicional) lesão pósoperatório pós operatório comparados (IKDC clínica Resultados 15,4 154 15 (15, 1,3 acompanhamento Porém dia P 0,05, 005 0,05 , 0 05 0,05) Conclusão tradicionais pósoperatória, pósoperatória operatória, operatória pós-operatória tratamento II 20 202 183 18- 15, (15 1, 00 0,0 (1 0, (

ABSTRACT Introduction: Total internal arthroscopic anterior cruciate ligament reconstruction is one of the new technologies in recent years. The main advantage is the need for only one tendon for the surgical procedure. Objective: Compare the clinical effects of total internal and traditional anterior cruciate ligament reconstruction techniques. Methods: From January 2019 to January 2022, the clinical data of 45 patients with anterior cruciate ligament reconstruction were retrospectively analyzed, including 32 males and 13 females aged 18-33 years, mean of 24.2 ± 3.3 years. Total internal reconstruction was performed in 22 cases (total internal group) and traditional reconstruction in 23 cases (traditional group). The two groups recorded and compared the time of injury, duration of surgical procedure, postoperative VAS score, and recovery of knee function. The International Knee Literature Committee (IKDC) and the Lysholm scoring system were used to evaluate clinical efficacy. Results: 45 patients were followed for 14 to 18 months, mean (15.4 ± 1.3) months. There were no significant differences between the two groups in time between operation and injury, duration of operation, IKDC, and Lysholm score of the affected knee at the last follow-up. However, there were significant differences in the VAS score on day one, day three, day seven, two weeks, and one month after the operation (P < 0.05), with no significant difference at three months, six months, and one year after the operation. Conclusion: The effect of total internal reconstruction of the anterior cruciate ligament is equivalent to that of traditional methods, with less postoperative pain, making it the ideal choice for this treatment. Level of evidence II; Therapeutic studies - investigation of treatment outcomes. Introduction years procedure Objective techniques Methods 201 2022 4 analyzed 3 1 1833 33 18-3 242 24 2 24. 3. group group. . injury function IKDC (IKDC efficacy Results months 15.4 154 15 (15. 1.3 followup. followup follow up. up follow-up However seven weeks P 0.05, 005 0.05 , 0 05 0.05) Conclusion methods pain II outcomes 20 202 183 18- 15. (15 1. 00 0.0 (1 0. (

Abstract Objective The purpose of this study is to investigate the pathogenic role of PPARα in periodontal antigen treated gingival cells in vitro and in experimental periodontitis in vivo . Methodology Gingival fibroblasts, gingival epithelial cells and splenocytes were isolated from C57BL/6J wild type (WT) mice and treated with fixed P. gingivalis at for 48 hours. The mRNA levels of PPARs, TNFα, IL-1β and IL-10 were detected by Real-time quantitative PCR. Silk ligatures after being soaked in the P.gingivalis suspension were tied around both maxillary second molars of WT mice or PPARα knock-out (KO) mice for two weeks. PPARα agonist fenofibrate and vehicle control were injected into the different side of the palatal gingiva on days 3, 6, and 9. At day 14, bone resorption and gingival mRNA expression levels of PPARs, TNFα, IL-1β and IL-10 were measured by micro-computed tomography and RT-qPCR respectively. Results P. gingivalis treatment downregulated the expression of PPARα, but not PPARβ or PPARγ, and increased the expression of TNF-α and IL-1β in Gingival fibroblasts, gingival epithelial cells and splenocytes from WT mice. Gingival mRNA levels of PPARα were significantly decreased in experimental periodontitis in WT mice. The bone loss of PPARα KO mice in experimental periodontitis was significantly higher than WT mice and was not reduced by fenofibrate treatment. Gingival TNFα protein expressions were significantly increased by P. gingivalis associated ligation and decreased by fenofibrate treatment in WT mice but not in PPARα KO mice. Conclusion This study suggests that PPARα plays an essential role in periodontitis. fibroblasts C57BL6J CBLJ C57BL 6J C BL J (WT P 4 hours PPARs IL1β ILβ IL 1β β IL10 10 IL-1 Realtime Real time PCR Pgingivalis knockout knock out (KO weeks 3 6 9 14 microcomputed micro computed RTqPCR RT qPCR respectively PPARγ TNF α CBL IL1 1 IL-

Abstract A series of mesoporous materials supported ionic liquids were prepared and tested as effective and practical catalysts for the synthesis of 2,4,5-triaryl-1H-imidazoles. The effects of type of catalysts, catalyst amount, and catalyst stability have also been investigated in detail, the catalyst Ti-SBA-15@ILTsO exhibited excellent activity in excellent yields of 92 % ~ 99 % with low catalyst amount at room temperature within 1 h. In addition, the supported ionic liquid can be easily recovered and reused for six times with satisfactory catalytic activity. Furthermore, a general synergetic catalytic mechanism for the reaction was proposed. Maybe this work employing Ti-SBA-15@ILTsO as highly efficient and stable catalyst for the synthesis of 2,4,5-triaryl-1H-imidazoles has potential commercial applications.

Resumen Se prepararon y probaron una serie de materiales mesoporosos soportados con líquidos iónicos como catalizadores eficaces y prácticos para la síntesis de 2,4,5-triaryl-1H-imidazoles. También se investigaron en detalle los efectos del tipo de catalizadores, la cantidad de catalizador y la estabilidad del catalizador. El catalizador Ti-SBA-15@ILTsO mostró una excelente actividad con rendimientos excelentes del 92 % ~ 99% con una baja cantidad de catalizador a temperatura ambiente en 1 h. Además, el líquido iónico soportado puede recuperarse fácilmente y reutilizarse durante seis veces con una actividad catalítica satisfactoria. Por otro lado, se propuso un mecanismo catalítico sinérgico general para la reacción. Este trabajo que emplea Ti-SBA-15@ILTsO como catalizador altamente eficiente y estable para la síntesis de 2,4,5-triaril-1H-imidazoles puede tener aplicaciones potencialmente comerciales.

RESUMO: Depois de usar o método conhecido como escala de cinza para plantas de milho, a diferença de escala de cinza entre diferentes partes da planta é grande ou a diferenciação do solo não é alta, a precisão do trajeto de navegação é baixa e a velocidade é lenta. Neste trabalho foi proposto um novo método de extração da linha de referência de navegação para campos de milho, que é usado para controlar a caminhada de robôs agrícolas. Os métodos de projeto incluem: segmentação de imagem, extração de ponto de navegação e encaixe de linha de navegação. A segmentação por imagem é baseada na separação de culturas e solos com base no novo fator de escala de cinza combinado com a filtragem mediana, método de Otsu e operação morfológica. A extração de pontos de navegação é baseada em um mapa de projeção vertical de imagem de dois valores para obter a área de interesse, e as coordenadas do ponto de navegação são determinadas por cálculo do ponto central relativo no pixel branco da linha amostral na área de interesse. O fator de escala de cinza melhorado nesta pesquisa irá extrair o centro da entre linha de plantio alvo com uma taxa de precisão de 92%. A precisão de extração da linha de navegação é mais de 90%. O erro máximo foi de 5cm quando o experimento de rastreamento de navegação em tempo foi é realizado em campos de milho.

ABSTRACT: Focusing on the problem that corn plant in different growth periods is grayed out by known methods, the gray scale difference of different part is large or the soil discrimination degree is not high, the navigation path is low in accuracy and speed. This paper proposed a new method for extracting cornfield navigation baselines, which is used to control walking of agricultural robots. Design method included image segmentation, navigation point extraction, and navigation path fitting. Image segmentation is based on a new grayscale factor combined with median filtering, OSTU method and morphological operations to achieve the separation of crops and soil. The extraction of the navigation point is based on the binary image vertical projection map to obtain the region of interest, and the navigation point coordinates are determined by calculating the relative center point of the white pixel points of the sampling line in the region of interest. The Hough transform is used to fit the navigation point obtained by the vertical projection map to determine the navigation path, and then the control parameters are obtained. The gray scale factor that is improved in this paper combined with the vertical projection map can extract the target ridge with an accuracy rate of 92%, and the accuracy of extracting the navigation line is more than 90%. When conducting navigation tracking experiments in corn field, the maximum error is 5cm.

RESUMO: Para resolver o problema que os nós do caule são difíceis de identificar no processo de corte automático de sementes de cana-de-açúcar, é proposto, neste artigo, um método para identificar os nós do colmo da cana-de-açúcar com base nos pontos extremos da função de projeção vertical. Em primeiro lugar, a fim de reduzir a influência da luz no processamento da imagem, a imagem de cor RGB foi convertida em imagem de cor HSI, e a imagem de componente S do espaço de cores HSI é extraída como um objeto de pesquisa. Em seguida, o método Otsu foi usado para binarizar o mapa do componente S, e a operação morfológica fechada foi usada para preencher os espaços da imagem binária, e a projeção horizontal da imagem binária foi usada para separar a cana de açúcar do fundo. Finalmente, a posição do caule de cana-de-açúcar foi preliminarmente determinada através da tomada contínua do derivado da função de projeção vertical da imagem binária, e a soma do valor pixel local da coluna de pixel suspeito foi comparada para determinar ainda mais o nódulo da cana-de-açúcar. Os resultados experimentais mostram que a taxa de reconhecimento do nó de haste única foi de 100%, o desvio padrão foi inferior a 1.1 mm. A precisão da identificação simultânea de nós de haste dupla foi de 98%, o desvio padrão foi menor que 1.7 mm. A precisão da identificação simultânea dos três nós de haste é de 95%, o desvio padrão foi inferior a 2.2 mm. Comparado com os outros métodos introduzidos neste artigo, o método proposto possui maior reconhecimento e precisão.

ABSTRACT: In order to solve the problem that the stem nodes are difficult to identify in the process of sugarcane seed automatic cutting, a method of identifying the stem nodes of sugarcane based on the extreme points of vertical projection function is proposed in this paper. Firstly, in order to reduce the influence of light on image processing, the RGB color image is converted to HSI color image, and the S component image of the HSI color space is extracted as a research object. Then, the S component image is binarized by the Otsu method, the hole of the binary image is filled by morphology closing algorithm, and the sugarcane and the background are initially separated by the horizontal projection map of the binary image. Finally, the position of sugarcane stem is preliminarily determined by continuously taking the derivative of the vertical projection function of the binary image, and the sum of the local pixel value of the suspicious pixel column is compared to further determine the sugarcane stem node. The experimental results showed that the recognition rate of single stem node is 100%, and the standard deviation is less than 1.1 mm. The accuracy of simultaneous identification of double stem nodes is 98%, and the standard deviation is less than 1.7 mm. The accuracy of simultaneous identification of the three stem nodes is 95%, and the standard deviation is less than 2.2 mm. Compared with the other methods introduced in this paper, the proposed method has higher recognition and accuracy.

Abstract China, origin of mulberry, has rich genetic resources usually. High expense, limited space and wavering environment of usually conservation in vivo poses dangerous situation for mulberry. The concept of core collection could takes priority for conservation of mulberry. In this study, 560 accessions were used with 40 morphological descriptors and stratified sampling strategies for a core collection. The core collection consisted of 28 accessions, accounting for 5% of the whole collection. The core collection included seven accessions belonging to Morus alba, one accession belonging to M. alba var. macrophylla, four accessions belonging to M. atropurprea, one accession belonging to M. nigra, three accessions belonging to M. australis, seven accessions belonging to M. multicaulis, two accessions belonging to M. wittorum and three accessions belonging to M. bombycis. The quality of core collection exceeded the evaluation criteria and could be a prioritized collection for high efficient and long-term conservation for mulberry.

RESUMEN El flujo de detritos que cae en los tributarios de los ríos puede bloquear los ramales principales y eventualmente convertirse en un riesgo. El rompimiento de uno de estos represamientos de agua puede causar inundaciones en las zonas de la corriente, además de víctimas y daños a propiedades. Este estudio propone un método para evaluar la formación de represamientos de agua por flujo de detritos bajo dos condiciones: (1) los sedimentos transportados por el flujo de detritos deben alcanzar el lecho del río; (2) el grosor de los depósitos por el flujo de detritos debe ser mayor que la profundidad de agua in situ. Esta metodología se utilizó para estudiar el caso de represamiento por el flujo de detritos en el río Er de Taiwán, el cual bloqueó el río Chishan y que condujo a la formación de la presa Namasha. Esta metodología también puede aplicarse para identificar la formación de represamientos por flujo de detritos.

ABSTRACT Debris flows in tributaries rush into and block the main branches of rivers and often result in serious hazards. Dam failures cause large floods in the downstream area and can lead to fatalities and property damage. This study proposes an assessment method to evaluate the formation of a debris flow dam, which includes two conditions: (1) the sediment transported by the debris flow must reach across the river; and (2) the thickness of the deposit by the debris flow must be higher than the in situ water depth. This methodology was used to study the case of a debris flow dam caused by debris flow across the Er River in Taiwan, which blocked the Chishan River and led to the formation of the Namasha debris flow dam. This methodology can also be applied to identify the formation of debris flow dams.

Background: The impact of enteral nutrition (EN) on surgical risk in Crohn's disease (CD) patients suffering from spontaneous intra-abdominal abscess (IAA) was evaluated. Methods: CD patients diagnosed with spontaneous IAA from 2008 to 2015 were included in the study. The impact of EN on surgical risk was evaluated using both univariate and multivariate analyses. Results: A total of 87 patients were enrolled, 66 (75.9%) were male. The mean age at the development of an abscess was 30.2 ± 10.1 years and the median duration of illness from CD diagnosis until the development of an abscess was three (2-6) years. After a median follow-up of 1.9 (1.1-2.9) years, surgical intervention was performed in 42 patients (48.3%). Patients treated with EN were less likely to require surgical intervention (26.1% vs 56.3%, p = 0.01). Multivariate analysis showed that EN was an independent protective factor for the risk of surgery with a hazard ratio of 0.27 (95% confidence interval: 0.11-0.65, p = 0.004) after adjusting for abdominal pain, history of abdominal surgery, concomitant intestinal stenosis and prior use of antibiotics within three months. Conclusions: Surgical intervention is common for CD patients with IAA. Appropriate application of EN may help obviate the need for surgical treatment.

El terremoto de Wenchuan, el 12 de mayo de 2008, generó una gran cantidad de material sólido suelto que puede producir flujos de detritos devastadores. En los años posteriores al terremoto han ocurrido deslizamientos a gran escala individuales y simultáneos que han causado daño a los habitantes reubicados y a los esfuerzos de reconstrucción. Las ciudades reconstruidas de Yingxiu, Yinxing y Miansi han sufrido flujos de detritos y otros desastres secundarios desde el terremoto, y no están exentas de eventos futuros. Un evento simultáneo de flujo de detritos afectó a cuatro localidades del condado de Wenchuan, a lo largo de la autopista de Duwen, parte de la carretera nacional 213, en la medianoche del 10 de julio de 2013, después de una lluvia extrema de 176,2 mm 24h-1. Los movimientos de detritos ocurrieron en siete pendientes. Un total de 1500 personas resultaron afectadas debido a la destrucción en áreas de reasentamiento, fábricas, estaciones eléctricas y viviendas. Debido a este devastador hecho, el tráfico de la autopista Duwen estuvo interrumpido durante el período del desastre y mientras se recuperaba la zona. Este estudio se enfoca en el deslizamiento del Puente Lianshan, donde se analizaron las características y las causas del flujo de detritos basados en investigaciones de campo, interpretación de detección remota y experimentos de laboratorio. Se calcularon y analizaron los parámetros dinámicos particulares del flujo de detritos como la densidad, velocidad, descarga, volumen total y fuerza de impacto. También se analizaron los procesos dinámicos y los cambios que ocurrieron en el flujo de detritos, al igual que se estudiaron las características de bloqueo y ruptura del flujo con base en cálculos estadísticos y análisis de los parámetros dinámicos característicos. Finalmente, se propone un programa para prevenir mayores movimientos de detritos de acuerdo con la investigación de campo y basado en los análisis de las características y procesos dinámicos del flujo de material sólido suelto.

The Wenchuan earthquake of May 12, 2008, generated a significant amount of loose solid material that can produce devastating debris flows. In the five years since the earthquake, there have been many large-scale individual and group catastrophic debris flows that have caused lots of damage to the resettled population and the reconstruction efforts. The reconstructed towns of Yingxiu, Yinxing and Miansi have suffered debris flows and other secondary disasters in the past five years and are still not out of danger in the future. A debris-flow catastrophic event hit four towns of Wenchuan County along the Duwen Highway, part of China's National Highway 213, at midnight on July 10, 2013, following a local extreme rainfall of 176.2mm 24h-1. The debris flows occurred simultaneously along seven gullies. A total of 15000 people were affected due to the destruction of resettlement areas, factories, power stations, and houses. Because of this devastating event, traffic along the Duwen highway was completely disrupted during the disaster and recovery period. The present study focuses on the Lianshan Bridge debris flow gully; the disaster characteristics and cause of the debris flow were analyzed based on field investigations, remote sensing interpretation, and laboratory experiments. The particular dynamic parameters of the debris flow were calculated and analyzed including density, velocity, discharge, total volume and impact force. Also, the dynamic processes and changes that occurred in the debris flow were examined, and the block and burst characteristics of debris flow were studied based on statistical calculation and analysis dynamic characteristic parameters of debris flow. Finally, a program to prevent further debris flow was proposed according to the on-site investigation and based on the analysis of the features and dynamic processes of the debris flow.

The aim of this study is to evaluate the medicinal values of different parts of Epimedium brevicornu Maxim. and the effect of processing on major pharmaceutical ingredients in it. The contents of icariin and epimedin C in different parts and processed medicinal material of E. brevicornu in Taihang Mountain were determined with ultrasonic extraction and RP-HPLC. The results indicated that the contents of icariin and epimedin C, respectively 3.4524% and 0.5485%, in the leaf are higher than that in other parts. The contents of icariin and epimedin C, respectively 0.1942 % and 0.1342%, in the stem (include petiole) are the lowest. The contents of these ingredients in the root (include rhizome) are close to that in the leaf. The icariin and epimedin C in all parts of E. brevicornu reduced after processing. The content of icariin in the processed leaf is about 59.5% of that in unprocessed leaves. The effect of prossing on the content of icariin in the stem is unobvious. The content of epimedin C in the processed leaf is about 33.7% of that in unprocessed leaf. The content of epimedin C in the processed stem (include petiole) is about 36.9% of that in unprocessed stem. It is worth to exploit the stem and petiole of E. brevicornu because there are certain contents of pharmaceutical ingredients in them. The firepower should be paid attention to and the temperature should not be very high to avoid the damage on pharmaceutical ingredients in E. brevicornu when process it.

Este estudio pretende evaluar los valores medicinales de diferentes partes de la Epimedium brevicornu Maxim y el efecto de su procesamiento sobre sus principales componentes farmacéuticos. El contenido de icariina y epimedin C en diferentes partes y en material medicinal procesado de Epimedium brevicornu en la montaña de Taihang fue determinado mediante extracción ultrasónica y RP-HPLC. Los resultados indicaron que el contenido de icariina y epimedin C, respectivamente 3,4524% y 0,5485%, en la hoja son mayores que en otras partes. El contenido de icariina y epimedin C, respectivamente 0,1942% y 0,1342%, en el tallo (peciolo incluido) es más bajo. El contenido de estos componentes en la raíz (rizoma incluido) es similar al de la hoja. El contenido de icariina y epimedin C en todas las partes de E. brevicornu se vio reducido después del procesado. El contenido de icariina en la hoja procesada es aproximadamente el 59,5% del de la hoja sin procesar. El efecto del procesado sobre el contenido de icariina en el tallo no es evidente. El contenido de epimedin C en el tallo procesado es de aproximadamente el 33,7% del de la hoja sin procesar. El contenido de epimedin C en el tallo procesado (peciolo incluido) es de aproximadamente el 36,9% de aquel del tallo sin procesar. Vale la pena aprovechar el tallo y peciolo de la E. brevicornu porque hay cierto contenido de componentes farmacéuticos en ellos. Hay que controlar la potencia de fuego y la temperatura no debe ser muy alta para evitar dañar los componentes farmacéuticos de la E. brevicornu.

OBJETIVO: Metalotioneína 3 (MT-3) tem mostrado proteção contra a apoptose neuronal em cérebros de pacientes com doença de Alzheimer. Zinco é um potente inibidor da caspase-3, e sua deficiência pode promover a apoptose. No presente trabalho, foram dosados os níveis de zinco e cobre nos cérebros de camundongos PRONE8 com envelhecimento acelerado (SAMP8), visando investigar o efeito da MT-3 na apoptse dos neurônios da região hipocampal CA1 destes camundongos. MÉTODO: Os níveis de zinco e cobre em amostras cerebrais de camundongos SAMP8 e de controles normais SAMR1 foram determinados por absorção atômica em espectrofotometria. Foram administradas MT-3 ou MT-1 intraperitoneais durante quatro semanas, sendo em seguida avaliada a apoptose pelo método TUNEL , enquanto a expressão da proteína anti-apoptótica Bcl-2 e a proteína pró-apoptótica Bax foram avaliadas por imunohistoquímica. RESULTADOS: Em comparação aos camundongos SMAR1, o nível de zinco nas amostras cerebrais dos camundongos SAMP8 estava significativamente diminuído (P<0.05). Além disto, níveis significativos de apoptose foram observados no hipocampo dos camundongos SAMP8, o que, em comparação com os níveis em camundongos SMAR1, também mostrava níveis significativamente mais baixos de Bcl-2 e níveis mais altos de Bax (P<0.05). MT-3 aumentou a concentração de zinco no hipocampo dos camundongos SAMP8, além de diminuir significativamente a apoptose destes neurônios, de uma forma dose-dependente, ao mesmo tempo que aumentou níveis de Bcl-2 e diminuiu níveis de Bax. CONCLUSÃO: MT-3 pode atenuar a morte neuronal apoptótica no hipocampo de SAMP8, o que sugere que esta proteína possa diminuir a neurodegeneração.

OBJECTIVE: Metallothionein 3 (MT-3) has been shown to protect against apoptotic neuronal death in the brains of patients with Alzheimer's disease. Zinc is a potent inhibitor of caspase-3 and its deficiency was found to promote apoptosis. Here, we measured the zinc and copper content in the brains of senescence-accelerated mouse/PRONE8 (SAMP8) and sought to investigate the effect of MT-3 on the apoptosis of neurons in the hippocampal CA1 region of these mice. METHOD: The zinc and copper content in the brain samples of SAMP8 and normal control SAMR1 mice were determined using an atomic absorption spectrophotometer. The mice were administered intraperitoneally for four weeks with MT-3 or MT1 and thereafter apoptosis was measured using the TUNEL method and the expression of anti-apoptotic protein Bcl-2 and proapoptotic protein Bax was examined by immunohistochemistry. RESULTS: Compared with that in SMAR1 mice, the content of zinc in the brains of SAMP8 mice was significantly reduced (P<0.05). Moreover, significant levels of apoptosis of neurons were observed in the hippocampus of SAMP8 mice, which, compared with those in SMAR1 mice, also showed significantly lower levels of Bcl-2 and higher levels of Bax (P<0.05). MT-3 increased zinc concentration in the hippocampus of SAMP8 mice and also significantly decreased apoptosis in these neurons dose-dependently and increased the levels of Bcl-2 and decreased the levels of Bax. CONCLUSION: MT-3 could attenuate apoptotic neuron death in the hippocampus of SAMP8, suggesting that the protein may lessen the development of neurodegeneration.