RESUMO Introdução: A reabsorção cervical invasiva (RCI) é um tipo relativamente raro de reabsorção radicular externa (RRE), no qual uma reabsorção localizada começa na região cervical do dente, abaixo da junção epitelial e acima da crista marginal. Objetivo: Descrever o caso clínico de um menino com 11 anos de idade, sem histórico de trauma dentário, apresentando apinhamento moderado e erupção ectópica do incisivo central superior. Ele realizava tratamento ortodôntico em outro local, mas sua família estava insatisfeita com os resultados. Descrição: Foi iniciado um novo tratamento, que incluiu a expansão rápida da maxila, seguida pela extração de quatro pré-molares. Durante a avaliação de rotina da radiografia panorâmica, uma imagem radiolúcida foi detectada, e uma radiografia periapical da região foi solicitada, sendo encontrada uma RCI no incisivo central superior direito. O tratamento foi finalizado com cautela e, apesar do uso de forças leves, o incisivo central estava seriamente comprometido pela RCI e, portanto, precisou ser extraído. Conclusão: Esse exemplo clínico discute a importância das radiografias de rotina para o diagnóstico precoce da RCI.

ABSTRACT Introduction: Invasive cervical resorption (ICR) is a relatively rare type of ERR (External Root Resorption), in which a localized resorption begins in the cervical area of the tooth, below the epithelial junction and above the ridge crest. Objective: Describe the clinical case of an 11-year-old boy with no dental trauma history, presenting moderate crowding and ectopic eruption of the maxillary right central incisor. He had been undergoing orthodontic treatment elsewhere, and his family was dissatisfied with the results. Description: A new treatment was indicated, which included rapid maxillary expansion followed by extraction of four premolars. During routine panoramic evaluation, a radiolucid image was detected and a periapical radiograph was requested. At this point, an ICR of the maxillary right central incisor was found. The treatment was cautiously finalized and despite the use of light forces, central incisor was severally compromised by ICR and was therefore extracted. Conclusion: This clinical example discusses the importance of routine radiographs for the early diagnoses of ICR.

RESUMO Objetivo: Avaliar a qualidade de diagnóstico de imagens de TCFC para detecção de lesões de cárie utilizando parâmetros de exposição diferentes. Métodos: Sessenta dentes humanos extraídos foram selecionados e digitalizados usando o sistema Kodak 9000 3D TCFC, com as seguintes combinações de parâmetros de exposição: 74 kV, 10 mA; 74 kV, 12 mA; 74 kV, 8 mA70 kV, 10 mA; 70 kV, 12 mA; 70 kV e 8 mA; 70 kV, 6,3 mA. Dois observadores avaliaram as imagens para a presença de cárie utilizando o CS 3D Imaging Software. Cada observador pontuou as superfícies proximais de cada dente em uma escala de 5 pontos. Os escores foram comparados com cortes histológicos, utilizados como padrão-ouro. A precisão para detecção de lesões de cárie foi analisada para cada combinação de parâmetros de exposição e avaliada por meio de análise da curva ROC. Resultados: Os valores médios para as áreas sob as curvas ROC para cada combinação de parâmetro de exposição variou de 0,35-0,60. Não houve diferença estatística significativa entre os protocolos 1, 2, 4, 6 e 7. No entanto, os protocolos 3 e 5 diferem de todos os protocolos. Conclusão: Embora o protocolo de dose mais elevada foi o mais eficiente para a detecção da cárie proximal, o protocolo de dose mais baixa deverá ser escolhido com base no princípio ALADA.

ABSTRACT Objective: The objective of study was to evaluate the diagnostic quality of CBCT images for caries lesions detection using different exposure parameters. Methods: Sixty extracted human teeth were selected and scanned using Kodak 9000 3D CBCT system, with the following exposure parameters combinations: 74 kV, 10mA; 74 kV, 12mA; 74 kV, 8 mA; 70 kV, 10 mA; 70kV, 12 mA; 70 kV e 8 mA; 70 kV, 6.3 mA. Two observers evaluated the images for caries presence using CS 3D Imaging Software. Each observer scored the proximal surfaces of each tooth on a 5-point scale. The scores were compared to histological sections used as gold standard. Accuracy for caries lesion detection was assessed for each exposure parameter combination and evaluated by means of ROC curve analysis. Results: The mean values for the areas under the ROC curves for each exposure parameter combination varied from 0.35 to 0.60. There was no statistical significant difference among protocols 1, 2, 4, 6 and 7. However, protocols 3 and 5 differed from all protocols. Conclusion: Although the highest dose protocol was the most efficient for proximal caries detection, the lowest dose protocol should be chosen based on the ALADA principle.

Abstract This study aimed at verifying the correlation among angulation of the articular eminence (AE), shape of the condyle and its degenerative bone diseases (DBDs), according to age and sex, through Cone Beam Computed Tomography (CBCT). Five hundred and twenty-eight temporomandibular joints (TMJ) were evaluated. The condyles were classified as: flat, convex, angled and rounded, and the AE angulation was measured. The DBDs evaluated were osteophytes, flattening, erosion, subcortical cysts and spinal sclerosis. There was no difference in the mean angulations in relation to age group (p>0.05). In age groups of 60-69 years (p=0.003) and 70 years or over (p=0.021), the angulation was higher in males. There was an association between DBD and sex (p=0.047), in that the prevalence was higher in females. Differences in AE angles were not observed in condyles with one or no DBDs (p>0.05). However, the presence of two or more DBDs led to a decrease in the angle (p<0.05). Angled condyles showed higher AE angulations than the flat and convex types (p<0.01). In conclusion, the AE inclination is influenced by DBD and condyle shape; an association of two or more bone diseases in the condyle, or its flat or convex anatomy, results in a decrease in the angulation.

ABSTRACT The aim of this study was to evaluate the kerma at the surface of the lens in TMJ CBCT and to derive the equivalent dose. An anthropomorphic phantom of the head and neck manufactured by Radiation Support Devices (model RS-230) was used. The dosimetric measurements were obtained by using fourteen thermoluminescent dosimetry (TLD) dosimeters (LiF: Mg, Ti), divided in two pairs (one pair for each eye) and positioned on the surface of the phantom, per scanner evaluated. The tomographic images were acquired in three types of CBCT equipment (CS 9000, Gendex GXCB 500 and i-CAT). Values of equivalent dose obtained were: 5.82 mSv (CS 9000); 5.38 mSv (Gendex GXCB 500) and 7.98 mSv (i-CAT), which varied in accordance with the scanner and the exposure factors used in the image acquisition. The Gendex GXCB 500 used larger FOV and higher kV, resulting in levels close to those obtained on the CS 9000, while larger doses were associated with the i-CAT. The dose values associated with TMJ radiological procedures should be performed with awareness and appropriateness due to sensitivity of the lens.

Introdução: Para realização de mensurações precisas para implantes osteointegrados, é necessário que as imagens tomográficas apresentem uma qualidade mínima, que permita a visualização clara das estruturas anatômicas.Objetivo:Diante disso, avaliou-se, subjetivamente, a aceitabilidade das imagens de diferentes protocolos de tomografia computadorizada de feixe cônico (TCFC), para o planejamento de implantes osteointegrados.Material e método: Foram obtidas imagens de TCFC de dez hemimandíbulas maceradas no equipamento K9000 3D, sendo modificada apenas a miliamperagem (Grupo I: 2 mA; Grupo II: 8 mA e Grupo III: 15 mA). As aquisições foram feitas com 80 kV, FOV de 5 × 3,7 cm, matriz de 512 × 512 e voxel de 0,076 mm de espessura. Após as aquisições, três avaliadores analisaram as reconstruções ortogonais em três tamanhos de voxel, constituindo-se, assim, nove grupos experimentais. Após a realização das mensurações de altura e espessura óssea, os avaliadores atribuíram escores (sim ou não) para a aceitabilidade das imagens para mensurações.Resultado: Os grupos apresentaram qualidade de imagem aceitável para o planejamento de implantes, com exceção das imagens adquiridas com 2 mA e analisadas com voxel de 0,076 mm e 0,535 mm.Conclusão: O protocolo de 8 mA e voxel de 2,1 mm deve ser, preferencialmente, indicado na identificação do canal mandibular, já que a dose de radiação é menor do que nos protocolos de 15 mA e a qualidade de imagem é superior aos protocolos de 2 mA; além disso, voxel de 2,1 mm apresentou maior aceitabilidade das imagens.

Introduction: Performing accurate measurements for osseointegrated implant requires that the tomographic images show a minimum quality to allow adequate visualization of anatomical structures.Objective: Therefore, the acceptability of images of different Cone-Beam Computed Tomography (CBCT) protocols was assessed subjectively for the planning of osseointegrated implantsMaterial and method: CBCT images of ten hemimandibles macerated in K9000 3D system were obtained, and only mA was modified (Group I: 2mA, Group II: 8mA and Group III: 15mA). All acquisitions were made with 80kV, FOV of 5 × 3.7 cm, matrix: 512 × 512 and voxel thickness of 0.076 mm. After the acquisitions, the orthogonal reconstructions were analyzed in three voxel sizes by three evaluators, thus making up nine experimental groups . Following bone height and thickness measurements, the evaluators scored (as yes or no) the acceptability of the images to be measured.Result:The groups presented acceptable image quality for implant planning, with the exception of the images acquired with 2mA and analyzed with voxel of 0.076 mm and 0.535 mm.Conclusion:The 8mA and 2.1 mm voxel protocol should preferably be indicated in the identification of the mandibular canal, as the radiation dose is lower than 15mA protocols and image quality is higher than 2 mA protocols. Additionally, 2.1 mm voxel showed a higher acceptability of images.

Este trabalho tem como objetivo apresentar um caso clínico de adesão do disco da articulação temporomandibular à eminência articular, diagnosticada através da ressonância magnética. Paciente de 37 anos de idade, sexo feminino, com queixa de crises ocasionais de otalgia bilateral, ao longo dos últimos 2 anos. A paciente não referia dor ou ruídos articulares de qualquer natureza. Clinicamente, apresentava limitação de abertura de boca, com desvio à esquerda sem correção da trajetória ao final do movimento mandibular. A impressão diagnóstica foi de deslocamento anterior parcial, com redução, do disco articular direito; e, para o lado esquerdo, deslocamento anterior parcial, com redução, e adesão do disco articular ao componente temporal, com hipomobilidade do côndilo. A particularidade do caso descrito está justamente no fato de que além do deslocamento parcial anterior, bilateral, existia, também, uma adesão do disco no lado esquerdo. Conclui-se que o exame de ressonância magnética da articulação temporomandibular pode ser considerado o método de escolha para avaliação do posicionamento do disco articular e suas alterações morfológicas.

This case report has the aim to present an adhesion of the temporomadibular disc to the articular eminence, diagnosed on magnetic resonance imaging images. A 37-year-old female patient with TMJ (temporomandibular joint) disk adhesion on the left side and complaining of bilateral otalgia over the last 2 years is reported in the present article. The patient did not complain of articular pain or clicking, or any other noises of any nature. Clinical observation showed that the patient had restricted jaw opening, with mandibular deviation the left side without correction during mandibular movement. Our diagnostic impression was of partial anterior disk displacement with reduction of the right side disc; and partial anterior disk displacement with reduction and disc disk adhesion with hypo-mobility of the condyle, on the left temporomandibular joint. The peculiarity of this reported case is the fact that besides the bilateral partial anterior disc displacement, there was also found an adhesion of the disc on the left side. In conclusion, the magnetic resonance imaging exam of the temporomandibular joint can be considered an exam of choice for the evaluation of disc positioning and its morphological alterations.

This study was conducted to investigate how well cone-beam computed tomography (CBCT) can detect simulated cavitary defects in condyles, and to test the influence of the reconstruction protocols. Defects were created with spherical diamond burs (numbers 1013, 1016, 3017) in superior and/or posterior surfaces of twenty condyles. The condyles were scanned, and cross-sectional reconstructions were performed with nine different protocols, based on slice thickness (0.2, 0.6, 1.0 mm) and on the filters (original image, Sharpen Mild, S9) used. Two observers evaluated the defects, determining their presence and location. Statistical analysis was carried out using simple Kappa coefficient and McNemar's test to check inter- and intra-rater reliability. The chi-square test was used to compare the rater accuracy. Analysis of variance (Tukey's test) assessed the effect of the protocols used. Kappa values for inter- and intra-rater reliability demonstrate almost perfect agreement. The proportion of correct answers was significantly higher than that of errors for cavitary defects on both condyle surfaces (p < 0.01). Only in identifying the defects located on the posterior surface was it possible to observe the influence of the 1.0 mm protocol thickness and no filter, which showed a significantly lower value. Based on the results of the current study, the technique used was valid for identifying the existence of cavities in the condyle surface. However, the protocol of a 1.0 mm-thick slice and no filter proved to be the worst method for identifying the defects on the posterior surface.

OBJETIVO: Descrever os aspectos clinicopatológicos de dois casos de cisto odontogênico ortoqueratinizado e a compará-los a relatos anteriores. RELATO DO CASO: No caso 1, uma mulher de 17 anos de idade, apresentou edema endurecido e indolor na mandíbula posterior esquerda. Radiograficamente, uma área radiolúcida com uma radiopacidade foi observada. O diagnóstico clínico de ameloblastoma ou tumor odontogênico ceratocístico foi estabelecido. O exame histopatológico revelou um cisto odontogênico ortoqueratinizado. No caso 2, uma mulher de 23 anos apresentou duas lesões radiolúcidas circundadas por halos radiopacos simetricamente distribuídas, associada aos terceiros molares inferiores irrompidos. Um diagnóstico clínico de cisto dentígero bilateral (DC) foi estabelecido. O exame histopatológico mostrou ser um cisto odontogênico ortoqueratinizado. CONCLUSÃO: Cisto odontogênico ortoqueratinizado deve ser considerado no diagnóstico diferencial das lesões que ocorrem na mandíbula associado com dentes impactados, especialmente aqueles casos que simulem o cisto dentígero. Além disso, observamos a importância de tomadas radiográficas antes do tratamento ortodôntico no diagnóstico de patologias bucais.

PURPOSE: To describe the behavior clinical and pathological features of two cases of odontogenic cyst orthokeratinized. CASE DESCRIPTION: In case 1, a 17-year-old woman presented hard and painless swelling in the left posterior mandible. Radiographically, a radiolucent area with a radiopaque was observed. A clinical diagnosis of ameloblastoma or odontogenic keratocystic tumor was established. The histopathological examination revealed an orthokeratinized odontogenic cyst. In case 2, a 23-year-old woman presented a radiolucent lesion surrounded by radiopaque halo symmetrically distributed on both partially erupted lower third molars. A clinical diagnosis of bilateral dentigerous cyst (DC) was rended. The histopathological examination showed bilateral orthokeratinized odontogenic cyst. CONCLUSION: Orthokeratinized odontogenic cyst should be considered in the differential diagnosis of lesions occurring in the jawbones associated with an impacted tooth, particularly those cases simulating dentigerous cyst. In addition, we observed the importance of radiographs taken prior to orthodontic treatment as an important tool in the diagnosis of oral pathologies. Performing routine radiograph is of high clinical value, especially before orthodontic treatment.

This article focuses on important morphofunctional features of the temporomandibular joint, particularly those related to the ultrastructure and anterosuperior attachment of the joint capsule and condylar position at the end of the mouth-opening movement.

Se focaliza importantes aspectos morfofuncionales de la articulación temporomandibular, especialmente aquellos relacionados a la ultraestructura e inserción antero-superior de su cápsula articular y la posición final del cóndilo, en el movimiento de apertura máxima bucal.

OBJECTIVES: The aim of this study was to evaluate the detection of enamel-dentin occlusal caries using photostimulable phosphor plates. MATERIAL AND METHODS: The ability to detect enamel-dentin occlusal caries in 607 premolars and molars from 47 patients between 10 and 18 years old, referred to the School of Dentistry of the Federal University of Bahia, Brazil, was evaluated based on clinical and radiographic examinations, using the criteria proposed in a previous study. A total of 156 bitewing digital images were obtained using Digora® (Soredex Medical Systems, Helsinki, Finland) phosphor plates. The plates were scanned and the images were captured and displayed on a computer screen. Image evaluation was done using Digora® for Windows 2.1 software, Soredex®. The radiologists were allowed to use enhancement tools to obtain better visibility during scoring of the teeth based on the radiographic criteria proposed in a previous study. Descriptive analysis and chi-squared proportion tests were done at 5% significance level. RESULTS: The results of clinical examination showed a higher prevalence of teeth with a straight dark line or demineralization of the occlusal fissure (score 1) and a lower prevalence of sealed teeth (score 5). In the bitewing digital images, 47 teeth presented visible radiolucency, circumscribed, in dentin under occlusal enamel (enamel-dentin caries lesions). CONCLUSIONS: Correlating the clinical and radiographic findings, it was found that in the majority of teeth diagnosed by radiographic images as having enamel-dentin caries, no caries could be detected by clinical examination.

OBJETIVO: o objetivo deste estudo reside na avaliação do produto dose-área (DAP) e das doses de entrada na pele (DEP), empregando protocolos com tamanho de voxel diferente, obtidos com o aparelho de Tomografia Computadorizada de Feixe Cônico (TCFC) i-CAT, a fim de determinar melhores parâmetros baseados nos princípios da radioproteção. MÉTODOS: para medição do DEP foi utilizada uma câmara de ionização do tipo lápis, e para o DAP foi utilizado um aparelho PTW. Quatro protocolos foram testados, a saber: (1) 40 seg., voxel de 0,2mm e 46,72mAs; (2) 40 seg., voxel de 0,25mm e 46,72mAs; (3) 20 seg., voxel de 0,3mm e 23,87mAs; (4) 20 seg., voxel de 0,4mm e 23,87mAs. A quilovoltagem permaneceu constante (120KVp). RESULTADOS: detectou-se diferença estatisticamente significativa (p<0,001) entre os quatro protocolos, para os dois métodos de avaliação da dose de radiação (DAP e DEP). Na avaliação do DAP, os protocolos 2 e 3 promoveram uma diferença estatisticamente significativa, não sendo possível detectar qual dos protocolos na avaliação da DEP proporcionou esse resultado. CONCLUSÃO: DAP e DEP apresentam-se como métodos de avaliação para doses de radiação em tomografia computadorizada de feixe cônico, sendo necessários mais estudos para elucidar tal achado. O tamanho do voxel, isoladamente, não é capaz de interferir na dose de radiação em exames de TCFC (i-CAT). A dose de radiação para exames de TCFC (i-CAT) está diretamente relacionada ao tempo de exposição e à miliamperagem.

Objectives: The aim of this study was to evaluate the dose-area product (DAP) and the entrance skin dose (ESD), using protocols with different voxel sizes, obtained with i-CAT Cone-Beam Computed Tomography (CBCT), to determine the best parameters based on radioprotection principles. METHODS: A pencil-type ionization chamber was used to measure the ESD and a PTW device was used to measure the DAP. Four protocols were tested: (1) 40s, 0.2 mm voxel and 46.72 mAs; (2) 40s, 0.25 mm voxel and 46.72 mAs; (3) 20s, 0.3 mm voxel and 23.87 mAs; (4) 20s, 0.4 mm voxel and 23.87 mAs. The kilovoltage remained constant (120kVp). RESULTS: A significant statistical difference (p<0.001) was found among the four protocols for both methods of radiation dosage evaluation (DAP and ESD). For DAP evaluation, protocols 2 and 3 presented a statistically significant difference, and it was not possible to detect which of the protocols for ESD evaluation promoted this result. CONCLUSIONS: DAP and ESD are evaluation methods for radiation dose for Cone-Beam Computed Tomography, and more studies are necessary to explain such result. The voxel size alone does not affect the radiation dose in CBCT (i-CAT) examinations. The radiation dose for CBCT (i-CAT) examinations is directly related to the exposure time and milliamperes.

OBJETIVO: avaliar a existência de correlação entre a proporção da altura do ramo mandibular (AR) com a altura dentoalveolar posterior total (ADAPT) e a inclinação do plano mandibular (PM). MÉTODOS: dois examinadores avaliaram 81 telerradiografias laterais de pacientes, com idades a partir de 18 anos, do arquivo do curso de especialização em Ortodontia e Ortopedia Facial da Faculdade de Odontologia da UFBA. As radiografias foram digitalizadas, os pontos marcados e as medidas obtidas através do programa Radiocef 1.0. Mediu-se a inclinação do plano mandibular para caracterizar o padrão vertical da face e dividir as radiografias em três grupos: grupo de face normal (GN), de 22º a 28º, de face curta (GC), menor que 22º, e de face longa (GL), maior que 28º. A inclinação do plano palatino serviu como critério de exclusão, sendo que valores abaixo de -2,5° ou acima de 3,5º foram excluídos. Desta forma, 46 telerradiografias laterais totalizaram a amostra. RESULTADOS: a AR diferiu entre GC e GL, porém não houve diferença estatisticamente significante para as alturas dentoalveolares posteriores. Houve baixa correlação entre a AR e a ADAPT nos grupos, no entanto, a correlação da proporção entre essas alturas com a inclinação do PM mostrou-se estatisticamente significante e negativa. CONCLUSÃO: este é um fator a ser levado em consideração na avaliação do PM, quando do diagnóstico e tratamento das displasias verticais dentofaciais.

AIM: This study evaluated the relationship between two cephalometric variables: the mandibular ramus height/posterior alveolar bone height index (MRH/ABH) and the mandibular plane angle (MP). METHODS: Two examiners assessed 81 lateral cephalometric radiographs of at least 18 years old patients, retrieved from the archives of the Orthodontic Department from Federal University of Bahia (Salvador, BA, Brazil). The data input from the cephalogram was accomplished by using Radiocef Studio 1.0 software. The mandibular plane angle was used to assess the vertical growth pattern, in order to divide the sample into three groups: the normal face group (NG, 22º - 28°), the short face group (SG, less than 22°) and the long face group (LG, more than 28°). The palatal plane angle was evaluated as a criterion to exclude radiographs that presented values below -2.5° and above 3.5°. Thus, the final sample consisted of 46 lateral cephalometric radiographs. RESULTS: The ramus height differed between the SG and LG groups; however, there was no significant statistical difference for the posterior alveolar bone height among the three groups. No strong correlation between the mandibular ramus height (MRH) and the posterior alveolar bone height (ABH) was found; nevertheless, the correlation between the mandibular ramus height/posterior alveolar bone height index (MRH/ABH) and the mandibular plane angle (MP) was statistically significant and negative. CONCLUSION: Therefore, we concluded that this index (MRH/ABH) should be considered by orthodontists when evaluating the mandibular plane angle of patients with vertical dysplasias.

OBJETIVO: avaliar a efetividade de métodos de diagnóstico por imagem utilizados na localização vertical de sítios eleitos para inserção de mini-implantes. METODOLOGIA: a amostra foi composta de quatro pacientes, nos quais foram estabelecidos 32 sítios inter-radiculares, na região posterior, para instalação de mini-implantes, sítios estes representados por orifícios preenchidos com guta-percha em moldeiras de acetato (PCg - ponto de contato das coroas dentárias na moldeira de acetato; PIg - ponto de inserção do mini-implante na moldeira de acetato). Foram feitas radiografias periapicais, interproximais e tomografias computadorizadas de feixe cônico, com as moldeiras posicionadas em boca, sendo considerados os seguintes pontos: PC - imagem radiodensa do ponto PCg; PI - imagem radiodensa do ponto PIg; PCx - ponto de contato entre as coroas dentárias, determinado sobre a radiografia. Medidas verticais utilizadas: padrão-ouro - de PCg a PIg; medida 1 - de PC a PI; e medida 2 - de PCx a PI. As medidas foram comparadas através de análise descritiva e do teste t de Student. RESULTADOS: para a medida 1, foi observada diferença estatisticamente significante, em relação ao padrão-ouro, em 4,1%, 25% e 100% das medidas avaliadas nas tomografias computadorizadas, radiografias interproximais e periapicais, respectivamente. Para a medida 2, foi observada diferença estatisticamente significante, em relação ao padrão-ouro, em 4,1%, 56,2% e 100% das medidas avaliadas nas tomografias computadorizadas, radiografias interproximais e periapicais, respectivamente CONCLUSÕES: a tomografia computadorizada de feixe cônico foi o exame mais preciso na avaliação da posição vertical dos sítios eleitos para instalação de mini-implantes; a radiografia interproximal pode, com reserva, ser utilizada; a radiografia periapical apresentou resultados insatisfatórios, sendo contra-indicada para este fim.

OBJECTIVE: Evaluate the effectiveness of image diagnosis methods used in the vertical location of sites elect to insert mini-implants. METHODS: The sample was composed of four patients, in which 32 inter-radicular sites were established in the subsequent area, for setting up mini-implants. These sites were represented by holes filled out with guta-percha in acetate moulder (PCg - contact point of dental crowns in the acetate moulder; PIg - point of insertion of the mini-implant in the acetate moulder). Periapical X-rays, interproximal and computerized tomographies of cone-beam, with the moulders positioned in mouth, were performed and the following points were taken into consideration: PC - radiodense image of the PCg point; PI - radiodense image of the PIg point; PCx - contact point among the determined dental crowns on the X-ray. Vertical measures used: gold-pattern from PCg to PIg; measure 1 - from PC to PI; and measure 2 - from PCx to PI. The measures were compared through descriptive analysis and test t of Student. RESULTS: For the measure 1, differences statistically significant were observed (4.1%), in relation to the gold-pattern, 25% and 100% of the appraised measures in the computerized tomographies, interproximal and periapical X-rays, respectively. For the measure 2, differences statistically significant were observed in relation to the gold-pattern (4.1%), 56.2% and 100% of the appraised measures in the computerized tomographies, interproximal and periapical X-rays, respectively CONCLUSIONS: The cone-beam computerized tomography was the most precise exam in the evaluation of the vertical position of the elect sites to install mini-implants; the interproximal X-ray can, with reservation, be also used; the periapical X-ray presented unsatisfactory results, being contraindicated for this purpose.

Presentamos un caso de adhesión unilateral del disco de la articulación temporo-mandibular en un paciente de 51 años, sexo femenino, con queja de otalgia bilateral ocasional, de intensidad moderada, a lo largo de los últimos 10 años. La paciente no refirió dolor o ruidos articulares de ninguna naturaleza. Clínicamente, presentaba limitación de apertura bucal, con desvío hacia la izquierda sin corrección de la trayectoria al final del movimiento mandibular. La impresión diagnóstica clínica e imagenológica fue de desplazamiento anterior parcial con reducción del disco articular derecho; y aparente desplazamiento anterior parcial, adhesión del disco articular (“anchored disc phenomenon” - ADP) e hipomovilidad del cóndilo izquierdo.

It is reported on a case of a 51-year-old female patient presenting TMJ (temporomandibular joint) disk adhesion on the left side and complaining of otalgia over the last 10 years. The patient did not complain of articular pain or clicking. Clinically, the patient presented jaw opening limitation, with deflection of the mandible to the left side without correction of the trajectory at the end of the jaw opening movement. Our diagnostic impression was partial anterior disk displacement with reduction, for the right side; and elusive partial anterior disk displacement, disk adhesion (“anchored disc phenomenon” - ADP), and hipomobility of the condyle, for the left side.

Considerando-se o potencial da tomografia computadorizada tridimensional (TC-3D) como preditor de dimensões ósseas reais e avaliando-se nove crânios humanos secos com edentulismo maxilar, foi feito um estudo utilizando-se o recurso das imagens obtidas por TC-3D, previamente à execução da técnica de fixação zigomática, para mensurar o comprimento de tais fixações. Na avaliação da concordância interexaminador da TC-3D, houve uma boa correlação entre o primeiro e segundo (75%), e ausência de correlação entre estes e a medida cirúrgica. Contextualizando, o pior resultado foi o cirúrgico, possivelmente pelo fato de utilizar uma sonda imprecisa. Diante dos dados obtidos, concluiu-se que a sonda utilizada é imprecisa, sugerindo uma mudança na mesma quanto ao seu escalonamento e que medidas para aproximar as linguagens do cirurgião e do radiologista talvez fossem conseguidas com a utilização de guias de inserção, pois o que possivelmente ocasionou a discrepância nos resultados foi o fato de os examinadores 1 e 2 da TC-3D medirem um local de inserção da fixação e o cirurgião inserir esta em outro. É possível que uma amostra maior, por proporcionar avaliações mais abrangentes, possa incrementar os resultados ora encontrados.

Considering the potential of tridimensional computed tomography (3D-CT) as a predictor of real bone dimensions, nine dried human skulls with maxillary edentulism were evaluated using images obtained by 3D-CT, prior to the installation of zygomatic implants, in order to obtain the measurements of the implants. In the analysis of correlation between the two 3D-CT examiners, a 75% agreement was found, and no correlation was found between them and the surgical measurement. The worst result was the surgical one, possibly because an inaccurate probe was used. Based on the obtained data, we concluded that the probe used is inaccurate, suggesting that the surgical probe be changed in its measurement scale. Agreement between surgeon and radiologist could possibly be obtained by using insertion guides, since what might have possibly caused the discrepancy in the results is the fact that the 3D-CT examiners and the surgeon used different implant insertion points. It is also possible that a larger sample might produce a more accurate evaluation, thus improving the results.