Resumo O objetivo deste estudo clínico, prospectivo, randomizado e paralelo foi avaliar diferentes tratamentos em consultório para hipersensibilidade dentinária (HD). Cento e noventa e dois dentes com exposições radiculares não cavitadas foram tratados com diferentes dessensibilizantes: verniz fluoretado (Duraphat - FLU); solução cerâmica bioativa (Biosilicato - BIOS); adesivo autocondicionante universal (Single Bond Universal - SBU); verniz fotoativado bioativo (PRG filler - SPRG). O grau de HD foi analisado por meio da escala visual analógica (VAS) e da escala visual computadorizada (CoVAS), antes dos tratamentos e após 7, 15 e 30 dias da primeira sessão. As comparações entre dessensibilizantes foram feitas pelos testes de Kruskal-Wallis e Dunn. O teste de Friedman foi utilizado para comparação entre os tempos (p ≤ 0,05). Comparando os dessensibilizantes, o FLU apresentou um valor de HD maior do que o BIOS usando VAS aos 7 dias, no entanto, nenhuma diferença foi encontrada usando a análise CoVAS. Comparando os tempos, BIOS e SBU apresentaram redução de HD após 7 dias e SBU apresentou redução aos 30 dias em comparação com 7 dias usando VAS. Os grupos FLU e SPRG reduziram a HD em 15 dias a 30 dias usando VAS. Houve redução de HD para FLU, BIOS e SBU após 7 dias e para BIOS essa redução também ocorreu aos 30 dias quando comparada a 15 dias usando CoVAS. O grupo SPRG apresentou redução de 15 para 30 dias. Todos os dessensibilizantes testados foram capazes de reduzir a sensibilidade inicial. A solução de cerâmica bioativa reduziu o HD gradualmente após 30 dias usando análise computadorizada. clínico prospectivo HD. . (HD) Duraphat FLU) Biosilicato BIOS) Single SBU) PRG SPRG. SPRG) (VAS CoVAS, CoVAS , (CoVAS) 1 3 sessão KruskalWallis Kruskal Wallis Dunn p 0,05. 005 0,05 0 05 0,05) entanto inicial (HD (CoVAS 00 0,0 0,

Abstract The aim of this clinical, prospective, randomized, and parallel study was to evaluate different in-office treatments for dentin hypersensitivity (DH). One hundred ninety-two teeth with non-cavitated root exposures were treated using different desensitizers: fluoride varnish (Duraphat - FLU); bioactive ceramic solution (Biosilicate - BIOS); universal self-etching adhesive (Single Bond Universal - SBU); bioactive photoactivated varnish (PRG filler - SPRG). The degree of DH was analyzed using a visual analog scale (VAS) and computerized visual scale (CoVAS), before treatments and after 7, 15, and 30 days from the first session. Comparisons among desensitizers were performed using the Kruskal-Wallis and Dunn's tests. Friedman test was used to compare between times (p ≤ 0.05). Comparing desensitizers FLU presented a higher value of DH than BIOS using VAS at 7 days, however, no differences were found using CoVAS analysis. Comparing times, BIOS and SBU showed a reduction in DH after 7 days and SBU showed a reduction at 30 days compared to 7 days using VAS. FLU and SPRG groups reduced DH from 15 days to 30 days using VAS. There was a reduction in DH for FLU, BIOS, and SBU after 7 days and for BIOS this reduction also occurred at 30 days when compared to 15 days using CoVAS. SPRG group showed a reduction from 15 to 30 days. All desensitizers tested were able to reduce the initial sensitivity. The bioactive ceramic solution reduced the DH gradually after 30 days using computerized analysis. clinical prospective randomized inoffice office DH. . (DH) ninetytwo ninety two noncavitated non cavitated Duraphat FLU) Biosilicate BIOS) selfetching self etching Single SBU) PRG SPRG. SPRG) (VAS CoVAS, , (CoVAS) 3 session KruskalWallis Kruskal Wallis Dunns Dunn s tests p 0.05. 005 0.05 0 05 0.05) however analysis 1 sensitivity (DH (CoVAS 00 0.0 0.

Abstract Introduction fluoride toothpaste is widely used by the population. Objective dentifrices with a high concentration of sodium fluoride and the presence of tricalcium phosphate were developed, providing additional protection to patients vulnerable to the development of caries. This study aimed to evaluate the influence of different dentifrices on the surface and internal hardness and enamel wear after artificial caries, pH cycling, and toothbrushing. Material and method enamel blocks (4x4 mm) were obtained from 20 bovine teeth. The specimens were submitted to artificial caries lesion and then to pH cycling and brushing according to the dentifrice: Colgate Total 12 and Clinpro + Tricalcium Phosphate. Result after this period, they were submitted to analysis of superficial and internal hardness and profilometry. Scanning Electron Microscopy (SEM) was performed. The data obtained were evaluated by one-way Analysis of Variance (ANOVA) to evaluate the mineral recovery and profilometry, and two-way repeated measures ANOVA to evaluate the superficial and internal hardness. Conclusion analyzing the surface hardness, after caries induction, there was a significant reduction in hardness that was partially recovered regardless of the dentifrice used. For internal hardness, Clinpro obtained lower values on the control side and up to 90 micrometers on the test side. As for profilometry, Colgate Total 12 showed greater wear when compared to Clinpro. It was concluded that Clinpro promoted lower internal hardness, however, Colgate Total 12 resulted in greater surface wear of tooth enamel. population developed toothbrushing 4x4 x (4x mm 2 teeth 1 Phosphate period profilometry SEM (SEM performed oneway one way (ANOVA twoway two induction 9 however 4x

Resumo Introdução dentifrícios fluoretados são amplamente utilizados pela população. Foram desenvolvidos dentifrícios com alta concentração de fluoreto de sódio e presença de tricálcio fosfato, fornecendo proteção adicional a pacientes vulneráveis ao desenvolvimento da cárie. Objetivo o objetivo deste estudo foi avaliar a influência de diferentes dentifrícios na dureza superficial, interna e desgaste do esmalte após cárie artificial, ciclagem de pH e escovação. Material e método blocos de esmalte (4x4 mm) foram obtidos a partir de 20 dentes bovinos. Os espécimes foram submetidos à lesão de cárie artificial e, em seguida, à ciclagem de pH e escovação de acordo com o dentifrício: Colgate Total 12 e Clinpro + Tricálcio Fosfato. Após este período, foram submetidos à análise de dureza superficial e interna e perfilometria. Foi realizada microscopia eletrônica de varredura. Resultado os dados obtidos foram avaliados por ANOVA um critério para avaliar a recuperação mineral e perfilometria, ANOVA dois critérios medidas repetidas para avaliar a dureza superficial e interna. Conclusão analisando a dureza superficial, após a indução da cárie houve uma redução significativa na dureza que foi parcialmente recuperada independente do dentifrício utilizado. Para dureza interna, Clinpro obteve valores menores no lado controle e até 90 micrômetros no lado teste. Quanto à perfilometria, o Colgate Total 12 apresentou maior desgaste quando comparado ao Clinpro. Concluiu-se que Clinpro promoveu menor dureza interna, porém, o Colgate Total 12 resultou em maior desgaste superficial do esmalte dentário. população fosfato 4x4 x (4x mm 2 bovinos seguida 1 Fosfato período perfilometria varredura utilizado 9 teste Concluiuse Concluiu se porém dentário 4x

Abstract Objective To assess whether bleaching gel volume influences chromatic changes, hydrogen peroxide (HP) diffusion, inflammation, and oxidative stress in the pulp tissue. Methodology A total of 60 bovine teeth were divided into four groups, according to bleaching gel volume (n=15): without gel (WG); V30 (30 µL of 35% HP); V60 (60 µL); and V120 (120 μL). HP diffusion analysis was performed in the first session (T1). Chromatic changes (ΔE, ΔE00, and WID) were assessed after the first (T1), second (T2), third (T3) sessions, and 15 d (T4) after the end of treatment. Moreover, 20 rats were randomly divided into four groups (n=10) and their upper first molars were treated with different gel volumes: control (no treatment); V2 (2 μL of 17.5% HP); V4 (4 μL); and V8 (8 μL). After 24 h, rats were euthanized and the specimens processed for histological and immunohistochemical (nitric oxide synthase) evaluation. Data were analyzed using the Wilcoxon and Mann-Whitney tests (p<0.05). Results In vitro (bovine teeth), chromatic changes were not influenced by bleaching gel volume, showing similar values in all groups and sessions, except for the control group (p<0.05). The V120 group had the highest HP diffusion values (p<0.05). In vivo (pulp tissue), the V4 and V8 groups showed the highest inflammatory infiltrate in the pulp and significant oxidative stress (p<0.05). Conclusion The adverse effects on the dental pulp related to HP diffusion, pulp inflammation, and oxidative stress depend on bleaching gel volume, while the bleaching effect is not proportional to the volume used. (HP inflammation tissue 6 n=15 n15 n (n=15) WG (WG) V V3 30 (3 35 HP) V6 (6 µL) V12 120 (12 μL. . μL) T1. T1 T (T1) ΔE, ΔE (ΔE ΔE00 WID T1, , T2, T2 (T2) T3 (T3 sessions 1 T4 (T4 treatment Moreover 2 n=10 n10 10 (n=10 volumes no treatment) ( 175 17 5 17.5 4 8 h nitric synthase evaluation MannWhitney Mann Whitney p<0.05. p005 p p<0.05 0 05 (p<0.05) teeth, teeth) tissue, tissue) used n=1 n1 (n=15 (WG 3 V1 12 (1 (T1 ΔE0 (T2 (T (n=1 17. p00 p<0.0 (p<0.05 n= (n= p0 p<0. (p<0.0 (n p<0 (p<0. p< (p<0 (p< (p

Abstract This study aimed to evaluate the influence of dental adhesive color on the chromatic stability and fluorescence intensity of composite resin restorations of different thicknesses. Ninety bovine enamel samples were obtained and restored with resin composite varying thicknesses of restorative material and enamel (1.0 mm enamel and 1.0 mm composite; 1.5 mm enamel and 0.5 mm composite; 0.5 mm enamel and 1.5 mm composite). The restorations were made of composite resin (Opallis E-bleach H) using different types of dental adhesives: Ambar, Ambar APS, and Single Bond Universal (n=10). The samples were subjected to color measurement tests in a spectrophotometer using CIEDE2000 and fluorescence intensity measurements before and after aging in a red wine coloring solution. Data were subjected to analysis of variance (ANOVA) and Tukey's test (α = 0.05). There were no statistically significant changes in color stability or fluorescence intensity for restorations made of different materials or thicknesses (p>0.05). Single Bond Universal showed greater color stability at 0.5 mm thickness (ΔE00 = 4.4 ± 1.6) compared to other thicknesses of the same material (p=0.003), as well as a greater difference in fluorescence intensity after aging at 1.5 mm thickness (-414.9 ± 103.8) compared to other materials (p=0.0002). Overall, it was concluded that the different adhesive systems did not influence the color stability and fluorescence of restorations of different thicknesses. 10 1 0 (1. 1. 15 5 05 0. composite. . composite) Opallis Ebleach E bleach H adhesives APS n=10. n10 n n=10 (n=10) CIEDE CIEDE200 solution ANOVA (ANOVA Tukeys Tukey s α 0.05. 005 0.05 0.05) p>0.05. p005 p p>0.05 (p>0.05) ΔE00 ΔE (ΔE0 44 4 4. 1.6 16 6 p=0.003, p0003 p=0.003 , 003 (p=0.003) 414.9 4149 414 9 (-414. 103.8 1038 103 8 p=0.0002. p00002 p=0.0002 0002 (p=0.0002) Overall (1 n1 n=1 (n=10 CIEDE20 00 0.0 p00 p>0.0 (p>0.05 ΔE0 (ΔE p000 p=0.00 (p=0.003 414. 41 (-414 103. p0000 p=0.000 000 (p=0.0002 ( n= (n=1 CIEDE2 p0 p>0. (p>0.0 p=0.0 (p=0.00 (-41 (p=0.000 (n= p>0 (p>0. p=0. (p=0.0 (-4 (n p> (p>0 p=0 (p=0. (- (p> p= (p=0 (p (p=

Resumo O objetivo deste estudo foi avaliar a influência da cor do adesivo dental na estabilidade cromática e intensidade de fluorescência das restaurações de resina composta de diferentes espessuras. Foram obtidos noventa amostras de esmalte bovino que foram restaurados com resina composta, variando a espessura do material restaurador e do esmalte (1,0 mm de esmalte e 1,0 mm de compósito; 1,5 mm de esmalte e 0,5 mm de compósito; 0,5 mm de esmalte e 1,5 mm de compósito). As restaurações foram feitas de resina composta (Opallis E-bleach H) utilizando diferentes tipos de adesivos odontológicos: Ambar, Ambar APS, e Single Bond Universal (n=10). As amostras foram submetidas a testes de medição de cor em um espectrofotômetro usando CIEDE2000 e medições de intensidade de fluorescência antes e depois do envelhecimento em uma solução de coloração de vinho tinto. Os dados foram submetidos à análise de variância (ANOVA) e ao teste de Tukey (α = 0,05). Não houve mudanças estatisticamente significativas na estabilidade da cor ou intensidade de fluorescência para restaurações feitas de diferentes materiais ou espessuras (p>0,05). O Single Bond Universal mostrou maior estabilidade de cor a 0,5 mm de espessura (ΔE00 = 4,4 ± 1,6) em comparação com outras espessuras do mesmo material (p=0,03), bem como uma maior diferença na intensidade de fluorescência após o envelhecimento a 1,5 mm de espessura (-414,9 ± 103,8) em comparação com outros materiais (p=0,0002). Em geral, concluiu-se que os diferentes sistemas adesivos não influenciaram a estabilidade de cor e a intensidade de fluorescência das restaurações de diferentes espessuras. 10 1 0 (1, 1, compósito 15 5 05 0, compósito. . compósito) Opallis Ebleach E bleach H odontológicos APS n=10. n10 n n=10 (n=10) CIEDE CIEDE200 tinto ANOVA (ANOVA α 0,05. 005 0,05 0,05) p>0,05. p005 p p>0,05 (p>0,05) ΔE00 ΔE (ΔE0 44 4 4, 1,6 16 6 p=0,03, p003 p=0,03 , 03 (p=0,03) 414,9 4149 414 9 (-414, 103,8 1038 103 8 p=0,0002. p00002 p=0,0002 0002 (p=0,0002) geral concluiuse concluiu se (1 n1 n=1 (n=10 CIEDE20 00 0,0 p00 p>0,0 (p>0,05 ΔE0 (ΔE p=0,0 (p=0,03 414, 41 (-414 103, p0000 p=0,000 000 (p=0,0002 ( n= (n=1 CIEDE2 p0 p>0, (p>0,0 p=0, (p=0,0 (-41 p000 p=0,00 (p=0,000 (n= p>0 (p>0, p=0 (p=0, (-4 (p=0,00 (n p> (p>0 p= (p=0 (- (p> (p= (p

Abstract Objectives: To evaluate the influence of photobiomodulation with infrared laser (IRL) in the rat pulp tissue after bleaching, considering the immunolabeling of interleukin (IL)-23 and hypoxia-inducible factor (HIF)-1α. Methodology: The right and left molars of forty rats were divided into groups: Control – with placebo gel and Bleached – with 35% hydrogen peroxide (H2O2). Half of the rats received one IRL application on both sides, establishing a split-mouth design, which resulted in 4 groups with 20 hemi-maxillae each: Control, Bleach, IRL, and Bleached-IRL. Rats (n=10) from each group were euthanized, at 2- and 30-days mark, and the pulp tissue was evaluated using inflammation and immunolabeling scores. Wilcoxon and Mann-Whitney statistical tests were performed (p<0.05). Results: At the 2-days mark, the Bleached group had severe inflammation and necrosis in the occlusal thirds of the pulp, and moderate to severe inflammation in cervical third, whereas the Bleached-IRL had mild to moderate inflammation (p<0.05). At the 30-days mark, there was no inflammation, but tertiary dentine formation in the bleached groups. Regarding IL-23, severe immunolabeling was observed in the Bleached group (p<0.05) at the 2-days mark; at the 30-days mark, there was a reduction in immunolabeling, in which the Bleached group had moderate and the Bleached-IRL group had mild immunolabeling (p>0.05). HIF-1α was more evident at the 2-days mark in the Bleached group, without significant difference with the Bleached-IRL (p>0.05). The difference was observed between the bleached and control groups, without immunolabeling (p<0.05); at the 30-days mark, the Bleached group had reduction in HIF-1α immunolabeling, while the Bleached-IRL had an increase; the difference remained between the bleached and the controls groups (p<0.05) Conclusion: Photobiomodulation using IRL minimized the inflammation and IL-23 immunolabeling in the pulp tissue of rats after dental bleaching, but did not influence significantly the HIF-1α immunolabeling.

Abstract Objectives This study evaluated if the use of a bioactive glass-ceramic-based gel, named Biosilicate (BS), before, after or mixed with bleaching gel, could influence the inflammation of the dental pulp tissue of rats’ molars undergoing dental bleaching with hydrogen peroxide (H2O2). Methodology The upper molars of Wistar rats (Rattus norvegicus, albinus) were divided into Ble: bleached (35% H2O2, 30-min); Ble-BS: bleached and followed by BS-based gel application (20 min); BS-Ble: BS-based gel application and then bleaching; BS/7d-Ble: BS-based gel applications for 7 days and then bleaching; Ble+BS: blend of H2O2 with BS-based gel (1:1, 30-min); and control: placebo gel. After 2 and 30 days (n=10), the rats were euthanized for histological evaluation. The Kruskal-Wallis and Dunn statistical tests were performed (P<0.05). Results At 2 days, the Ble and Ble-BS groups had significant alterations in the pulp tissue, with an area of necrosis. The groups with the application of BS-based gel before H2O2 had moderate inflammation and partial disorganization in the occlusal third of the coronary pulp and were significantly different from the Ble in the middle and cervical thirds (P<0.05). The most favorable results were observed in the Ble+BS, which was similar to the control in all thirds of the coronary pulp (P>0.05). At 30 days, the pulp tissue was organized and the bleached groups presented tertiary dentin deposition. The Ble group had the highest deposition of tertiary dentin, followed by the Ble-BS, and both were different from control (P<0.05). Conclusion A single BS-based gel application beforehand or BS-based gel blended with a bleaching gel minimize the pulp damage induced by dental bleaching.

Abstract Objective This study aimed to evaluate the effects of different toothpastes on the surface wear of enamel, dentin, composite resin (CR), and resin-modified glass ionomer cement (RMGIC), and to perform a topographic analysis of the surfaces, based on representative images generated by atomic force microscopy (AFM) after erosion-abrasion cycles. Methodology One hundred and forty bovine incisors were collected and divided into two groups: 72 enamel and 72 dentin blocks (4×4 mm). Half of the specimens were restored with CR (Filtek Z350 XT) and the other half with RMGIC (Fuji II LC). Then, samples were submitted to a demineralization cycle (5 days, 4×2 min/day, 1% citric acid, pH 3.2) and exposed to three different toothpastes (2×15 s/day): without fluoride (WF, n=12), sodium fluoride-based (NaF, n=12), and stannous fluoride-based (SnF2, n=12). Surface wear, as well as restoration interfaces wear, were investigated by profilometry of the dental substrates and restorative materials. All representative surfaces underwent AFM analysis. Data were analyzed by two-way analysis of variance and Tukey’s tests (α=0.05). Results NaF-based toothpaste caused the greater dentin surface wear (p<0.05). Toothpastes affected only enamel-restoration interfaces. AFM analysis showed precipitate formation in dentinal tubules caused by the use of fluoride toothpastes. Conclusions NaF-based toothpastes had no protective effect on enamel adjacent to CR and RMGIC against erosion-abrasion challenges, nor on dentin adjacent to RMGIC material. SnF2-based toothpastes caused more damage to interfaces between enamel and RMGIC.

Abstract Objective The aim of this study was to compare two in vitro erosion protocols, in which one simulates in vivo conditions experienced by patients with gastroesophageal disorders or bulimia (HCl-pepsin protocol), and the other simulates the diet of an individual who consumes a high volume of erosive beverages (citric acid protocol). In addition, the mechanical properties and surface gloss of eroded human dentin were compared with those of sound human dentin. Materials and Methods Blocks of cervical dentin were used: sound human dentin (n=10), human dentin with erosive lesions (n=10), and bovine dentin (n=30). Twenty bovine blocks were subjected to either of two erosion protocols (n=10/protocol). In the first protocol, samples were demineralized using HCl-pepsin solution, then treated with trypsin solution. In the second protocol, samples were demineralized with 2% citric acid. Toothbrushing was performed in both protocols using a toothbrushing machine (15 s with a 150 g load). Ten bovine dentin blocks were not subjected to any erosive treatment. All samples of bovine and human dentin were analyzed to obtain Martens hardness values (MH), elastic modulus (Eit*) and surface gloss. One-way ANOVA and Tukey's test were performed to analyze the data (α=0.05). Results Sound human and eroded human dentin groups showed similar MH and Eit* values (p>0.05); however, sound human dentin showed a higher surface gloss value when compared to eroded human dentin (p<0.05). Sound bovine dentin and HCl-pepsin-treated bovine dentin treatments resulted in similar values for both MH and Eit* (p>0.05), but HCl-pepsin-treated bovine dentin and citric acid-treated bovine dentin resulted in lower surface gloss than sound bovine dentin (p<0.05). Conclusions The HCl-pepsin protocol modified bovine dentin properties that could be similar to those that occur on human dentin surfaces with erosive lesions.

Resumo O gel clareador à base de peróxido de hidrogênio (H2O2) causa danos ao tecido pulpar. Este estudo investigou a ação de um anti-inflamatório tópico, o Otosporin®, nos dentes de ratos clareados com a hipótese nula de que o Otosporin® não é capaz de minimizar a inflamação da polpa gerada pelo gel clareador. Os molares dos ratos foram divididos em grupos: ClA: clareado (H2O2 a 35% / aplicação única de 30 min); CLA-O: clareado seguido do Otosporin® (10 min); e controle: gel placebo. No segundo dia após a clareação dentária, os ratos foram mortos e suas maxilas foram processadas para análise de hematoxilina-eosina e imunohistoquímica para o fator de necrose tumoral alfa (TNF-a), interleucina (IL)-6 e IL-17. Os dados coletados foram submetidos aos testes estatísticos de Kruskal-Wallis e Dunn com um nível de significância de 5% (p<0,05). O grupo CLA apresentou inflamação moderada à severa no terço oclusal da polpa coronária, com áreas necróticas; e CLA-O, inflamação leve (p<0,05). Houve diferença significativa nos terços oclusal e médio da polpa coronária entre o grupo CLA com os grupos CLA-O e controle (p<0,05). Não houve diferença no terço cervical (p>0,05). O grupo CLA apresentou maior imunoexpressão para TNF-a comparado aos grupos CLA-O e controle (p<0,05), com imunoexpressão moderada e leve, respectivamente. Em relação a IL-6 e IL-17, o grupo CLA apresentou maior imunoexpressão comparado ao controle (p<0,05); o CLA-O foi semelhante ao controle (p>0,05). O anti-inflamatório tópico Otosporin® pode reduzir a inflamação pulpar após clareação em dentes de ratos.

Abstract Bleaching gel containing hydrogen peroxide (H2O2) cause damages in pulp tissue. This study investigated the action of a topical anti-inflammatory, the Otosporin®, in rats’ bleached teeth with the null hypothesis of which the Otosporin® is no able to minimize the pulp inflammation that bleaching gel generates. The rat’s molars were divided into groups: BLE: bleached (35% H2O2 concentration /single application of 30 min); BLE-O: bleached followed by Otosporin® (10 min); and control: placebo gel. In the second day after dental bleaching, the rats were killed, and the jaws were processed for hematoxylin-eosin and immunohistochemistry analysis for tumor necrosis factor alpha (TNF-α), interleukin (IL)-6 and IL-17. The data collected were subjected to Kruskal-Wallis and Dunn statistical tests with at a 5% level of significance (p<0.05). The BLE group had moderate to strong inflammation in the occlusal third of the coronary pulp, with necrotic areas; and BLE-O, mild inflammation (p<0.05). There was a significant difference in the occlusal and middle thirds of the coronary pulp between the BLE with BLE-O and control groups (p<0.05). There was no difference in the cervical third (p>0.05). The BLE group had a high immunoexpression of TNF-α than BLE-O and control groups (p<0.05), with moderate and mild immunoexpression, respectively. Regarding IL-6 and IL-17, the BLE group had higher immunoexpression than control (p<0.05); the BLE-O was similar to the control (p>0.05). The topical anti-inflammatory Otosporin® can reduce pulp inflammation after dental bleaching in the rat teeth.

Abstract Objective This study verified the occurrence of dental sensitivity in patients submitted to a 35% hydrogen peroxide based product (Whiteness HP Maxx 35% – FGM), skin cold sensation threshold (SCST) and its influence on dental sensitivity. Material and Methods Sixty volunteers were divided into 4 groups (n = 15), according to SCST (low: GI and GIII, and high: GII and IV) and bleaching treatment (hydrogen peroxide: GI and GII, and placebo: GIII and GIV). SCST was determined in the inner forearm for 6 different times using a neurosensory analyzer, the TSA II (Medoc Advanced Medical Systems, Ramat Yishai, Northern District, Israel). Dental sensitivity measurements were performed 10 different times using a thermal stimulus and an intraoral device attached to TSA II, positioned in the buccal surface of the upper right central incisor. Spontaneous dental sensitivity was also determined using the Visual Analogue Scale (VAS). Data were submitted to Student's t-test and Pearson's Correlation Test (α=0.05). SCST remained the same during bleaching treatment. Results Distinct responses of dental sensitivity were found in patients with low and high SCST during the first and third bleaching session (p≤0.05). The teeth submitted to the bleaching treatment became more sensitive to cold than those treated with placebo. Moreover, data obtained with TSA and VAS presented moderate correlation. Conclusions Bleaching treatment increased dental sensitivity and skin cold sensation threshold might represent a determining factor in this occurrence, since low and high SCST patients had different responses to the thermal stimulus in the teeth.

Abstract Objective The objective of this study was to evaluate dental sensitivity using visual analogue scale, a Computerized Visual Analogue Scale (CoVAS) and a neurosensory analyzer (TSA II) during at-home bleaching with 10% carbamide peroxide, with and without potassium oxalate. Materials and Methods Power Bleaching 10% containing potassium oxalate was used on one maxillary hemi-arch of the 25 volunteers, and Opalescence 10% was used on the opposite hemi-arch. Bleaching agents were used daily for 3 weeks. Analysis was performed before treatment, 24 hours later, 7, 14, and 21 days after the start of the treatment, and 7 days after its conclusion. The spontaneous tooth sensitivity was evaluated using the visual analogue scale and the sensitivity caused by a continuous 0°C stimulus was analyzed using CoVAS. The cold sensation threshold was also analyzed using the TSA II. The temperatures obtained were statistically analyzed using ANOVA and Tukey's test (α=5%). Results The data obtained with the other methods were also analyzed. 24 hours, 7 and 14 days before the beginning of the treatment, over 20% of the teeth presented spontaneous sensitivity, the normal condition was restored after the end of the treatment. Regarding the cold sensation temperatures, both products sensitized the teeth (p<0.05) and no differences were detected between the products in each period (p>0.05). In addition, when they were compared using CoVAS, Power Bleaching caused the highest levels of sensitivity in all study periods, with the exception of the 14th day of treatment. Conclusion We concluded that the bleaching treatment sensitized the teeth and the product with potassium oxalate was not able to modulate tooth sensitivity.

Resumo Este estudo teve como objetivo avaliar a penetração trans-amelodentinária do peróxido de hidrogênio (H2O2) aplicados em dentes bovinos pigmentados com chá preto em diferentes intensidades. Divisão dos grupos: AD em água destilada; CP100 em uma infusão de 1,6 g de chá preto para 100 mL de água destilada; CP10 em uma infusão de 1,6 g de chá preto para 10 mL de água destilada. Todos os grupos foram imersos por 6 dias. Para quantificar a penetração de H2O2, as amostras foram colocadas em câmaras pulpares artificiais (CPAs) e submetidas a um tratamento clareador com PH a 38%, uma vez por semana durante 3 semanas. Após o tratamento clareador, a solução tampão de acetato das CPAs com a enzima da peroxidase, foi avaliada num espectrofotômetro de reflexão. A penetração trans-amelodentinária de PH e os valores de L* obtidos em T1, T2 e T3 foram submetidos ao teste estatístico de Kruskal-Wallis e Friedman. Em T1, a difusão de H2O2 no AD foi mais elevada do que em CP100 e CP10. Nos outros tempos de avaliação, os valores de penetração no CP100 e CP10 aumentaram e permaneceram semelhantes. Os valores L* aumentaram significativamente em todos os grupos no T1. No T2, os valores L* foram maiores no AD e os valores em CP100 e CP10 foram semelhantes entre si. No último tempo, o CP10 apresentou os menores valores de L*. Diferentes níveis de pigmentação não afetaram a penetração de H2O2 através do esmalte e dentina e o agente de clareador foi eficaz na alteração cromática.

Abastract This study aimed to evaluate the transenamel and transdentinal penetration of hydrogen peroxide (H202) applied to bovine teeth pigmented with black tea at different intensities. The following groups were formed DW: immersion in distilled water; BT100: immersion in an infusion of 1.6 g of black tea per 100 mL distilled water; BT10: immersion in an infusion of 1.6 g black tea per 10 mL distilled water. All groups were immersed for 6 days. To quantify the penetration of H202, the specimens were placed in artificial pulp chambers (APCs) and subjected to bleaching treatment with 38% H2O2 once per week for 3 weeks. After bleaching treatment, the acetate buffer solution of APCs with peroxidase enzyme was evaluated in a reflection spectrophotometer. The transenamel and transdentinal penetration of H2O2 and the L* values obtained at T1, T2 and T3 were subjected to Kruskal-Wallis and Friedman statistical tests. At T1, the H2O2 diffusion in DW was higher than that in BT100 and BT10. At the other evaluation times, the penetration values in BT100 and BT10 increased and remained similar. The L* values increased significantly in all groups at T1. At T2, the L* values were higher in DW, while the values in BT100 and BT10 were similar to each other. At the end of the experiment, BT10 showed the lowest L* values. The pigmentation level did not affect the penetration of H2O2 through the enamel and dentin and the bleaching agent effectively changed the color of the teeth.

ABSTRACT Dental materials in general are tested in different animal models prior to the clinical use in humans, except for bleaching agents. Objectives To evaluate an experimental rat model for comparative studies of bleaching agents, by investigating the influence of different concentrations and application times of H2O2 gel in the pulp tissue during in-office bleaching of rats’ vital teeth. Material and Methods The right and left maxillary molars of 50 Wistar rats were bleached with 20% and 35% H2O2 gels, respectively, for 5, 10, 15, 30, or 45 min (n=10 rats/group). Ten animals were untreated (control). The rats were killed after 2 or 30 days, and the maxillae were examined by light microscopy. Inflammation was evaluated through histomorphometric analysis with inflammatory cell count in the coronal and radicular thirds of the pulp. Fibroblasts were also counted. Scores were attributed to odontoblastic layer and vascular changes. Tertiary dentin area and pulp chamber central area were measured histomorphometrically. Data were compared by analysis of variance and Kruskal-Wallis test (p<0.05). Results After 2 days, the amount of inflammatory cells increased in the coronal pulp occlusal third up to the 15-min application groups of each bleaching gel. In the groups exposed to each concentration for 30 and 45 min, the number of inflammatory cells decreased along with the appearance of necrotic areas. After 30 days, reduction on the pulp chamber central area and enlargement of the tertiary dentin area were observed, without the detection of inflammation areas. Conclusion The rat model of extracoronal bleaching showed to be adequate for studies of bleaching protocols, as it was possible to observe alterations in the pulp tissues and tooth structure caused by different concentrations and application periods of bleaching agents.

Resumo O objetivo deste estudo foi avaliar o efeito da ciclagem de pH erosiva com soluções que simulam a erosão dental, na dureza Martens (HMV) e módulo de elasticidade (Eit) da dentina restaurada com sistemas adesivos contendo fluoretos. Vinte e sete blocos de dentina foram restaurados com três sistemas adesivos: sistema adesivo de condicionamento total Adper Single Bond 2 e sistemas adesivos autocondicionantes contendo fluoreto One Up Bond F e Clearfil SE Protect. As restaurações foram realizadas com resina Filtek Z250. Os valores de HMV e Eit nas distâncias de 10, 30, 50 e 70µm da interface foram avaliadas em ultramicrodurômetro dinâmico antes e após a imersão em água deionizada, ácido cítrico e ácido clorídrico (n=9). Dados foram submetidos à ANOVA para medidas repetidas e Fisher PLSD (α=0,05). Após a ciclagem erosiva, os valores de HMV da dentina diminuíram em todos os grupos. Para a dentina restaurada com Adper Single Bond 2, os menores valores foram encontrados próximo a camada híbrida enquanto que, para os sistemas adesivos One Up Bond F e Clearfil SE Protect, os valores permaneceram inalterados em todas as distâncias. Para a dentina restaurada com os materiais que liberam fluoretos, uma redução nos valores de Eit foi encontrada, mas após 30µm essa diferença não foi mais significante. As substâncias ácidas foram capazes de alterar a HMV e o Eit da dentina subjacente. Para os adesivos que liberam fluoretos, quanto maior a distância da interface adesiva, menor os valores de Eit. O fluoreto presente no One Up Bond F e Clearfil SE Protect foi capaz de proteger a dentina subjacente próxima aos materiais. Dessa maneira, a presença do flúor em sistemas adesivos pode ter algum efeito positivo em estágios iniciais de lesões erosivas.

Abstract The aim of the study was to evaluate the effect of erosive pH cycling with solutions that simulate dental erosion on Martens hardness (HMV) and elastic modulus (Eit) of dentin restored with fluoride-releasing adhesive systems. Twenty-seven bovine dentin slabs were restored with three adhesive systems: Adper Single Bond 2 total-etch adhesive system, One Up Bond F and Clearfil SE Protect fluoride-containing self-etching adhesive systems. The restorations were made with Filtek Z250. The HMV and Eit values at distances of 10, 30, 50 and 70 µm from the interface were evaluated using a dynamic ultra microhardness tester before and after immersion in deionized water, citric acid and hydrochloric acid (n=9). Data were submitted to repeated-measures ANOVA and Fisher's PLSD tests (=0.05). After erosive cycling, HMV values of dentin decreased in all groups. For dentin restored with Adper Single Bond 2, the lowest values were found closer to the hybrid layer, while for One Up Bond F and Clearfil SE Protect, the values remained unaltered at all distances. For dentin restored with fluoride-releasing adhesive systems, a decrease in Eit was found, but after 30 µm this difference was not significant. The acid substances were able to alter HMV and Eit of the underlying dentin. For fluoride-releasing adhesives, the greater the distance from bonded interface, the lower the Eit values. The fluoride in One Up Bond F and Clearfil SE Protect was able to protect the underlying dentin closer to the materials. In this way, the fluoride from adhesive systems could have some positive effect in the early stages of erosive lesions.

Resumo O peróxido de hidrogênio (H2O2) é capaz de penetrar pelos tecidos dentários, alterando a coloração destes, e causar danos a polpa. Este estudo avaliou a penetração por esmalte e dentina, a alteração de cor e a reposta tecidual pulpar, provocadas pelo uso de duas concentrações de H2O2 em protocolos de clareação dentária de consultório. Discos de dentes bovinos em câmaras pulpares artificiais receberam géis clareadores para avaliação da penetração por esmalte e dentina e da alteração de cor, formando os grupos: BLU (H2O2 20% - 1x50 min, Whiteness HP Blue); MAX (H2O2 35% - 3x15 min, Whiteness HP Maxx); e Controle (gel placebo - 1x50 min). A penetração por esmalte e dentina foi quantificada baseada na reação do H2O2 com o corante violeta leucocristal, e a alteração de cor foi analisada pelo sistema CIELab. Vinte ratos Wistar foram divididos em dois grupos (BLU e MAX), e tiveram os molares direito superiores tratados com os mesmos protocolos do estudo in vitro; os molares superiores do lado esquerdo serviram de controle. Após 2 dias, os animais foram eutanasiados e as maxilas examinadas por microscopia de luz. Foram atribuídos escores ao infiltrado inflamatório (1, ausente; 2, leve; 3, moderado; 4 severo ou necrose). Os dados foram submetidos a testes estatísticos (=0,05). O grupo MAX apresentou maior penetração de H2O2 por esmalte e dentina (p<0,05). A alteração de cor foi semelhante nos grupos clareados (p>0,05), mas diferente quando comparados grupos clareados com controle (p<0,05). MAX apresentou inflamação severa nos terços superiores da polpa coronária, e BLU apresentou inflamação moderada (p<0,05). Assim, protocolo para procedimento clareador de consultório utilizando baixas concentrações de H2O2 deve ser de escolha na clínica, por reduzir a penetração por esmalte e dentina, causando menos danos à polpa, e proporcionar mesma eficiência clareadora.

Abstract Hydrogen peroxide (H2O2) penetrates into the dental hard tissues causing color alteration but also alterations in pulpal tissues. Hard-tissue penetration, color alteration and the pulp response alterations were evaluated for two in-office bleaching protocols with H2O2. For trans-enamel/dentin penetration and color alteration, discs of bovine teeth were attached to an artificial pulp chamber and bleached according to the groups: BLU (20% H2O2 - 1x50 min, Whiteness HP Blue); MAX (35% H2O2 - 3x15 min, Whiteness HP Maxx); Control (1x50 min, placebo). Trans-enamel/dentin penetration was quantified based on the reaction of H2O2 with leucocrystal violet and the color analyzed by CIELab System. Twenty Wistar rats were divided into two groups (BLU and MAX) and their maxillary right molars were treated according to the same protocols of the in vitro study; the maxillary left molars were used as controls. After 2 days, the animals were killed and their maxillae were examined by light microscopy. The inflammation of pulp tissue was scored according to the inflammatory infiltrate (1, absent; 2, mild; 3, moderate; 4, severe/necrosis). Data were analyzed by statistical tests (α=0.05). MAX showed higher trans-enamel/dentinal penetration of H2O2 (p<0.05). The color alteration was similar for both groups (p>0.05), and different when compared to Control group (p<0.05). MAX showed severe inflammation in the upper thirds of the coronal pulp, and BLU showed moderate inflammation (p<0.05). In-office bleaching protocols using lower concentrations of hydrogen peroxide should be preferred due to their reduced trans-enamel/dentinal penetration since they cause less pulp damage and provide same bleaching efficiency.