RESUMO: A criação em cativeiro do jacaré do Pantanal (Caiman yacare) oferece grande potencial para o aproveitamento integral de todas as partes componentes do animal. A carne é uma opção para consumo humano com boa aceitação sensorial, a pele é valorizada no mercado internacional e a carcaça pode ser utilizada para obtenção de carne de jacaré mecanicamente separada (CJMS). O objetivo deste trabalho foi avaliar os parâmetros físico-químicos da carne mecanicamente separada obtida da carcaça do jacaré do Pantanal para melhorar seu rendimento. A oxidação lipídica, pH, bases voláteis totais (TVB) e cor durante o armazenamento sob congelamento a -18 °C, foram avaliados por 90 dias. Além disso, foi avaliada a composição centesimal. A CJMS apresentou baixo teor de lipídios, alto teor de proteína e boa estabilidade durante o armazenamento sob congelamento por 90 dias. Esses resultados demonstram que a CJMS pode ser utilizada no desenvolvimento de produtos cárneos de jacaré. RESUMO Caiman yacare animal sensorial CJMS. . (CJMS) físicoquímicos físico químicos rendimento lipídica pH TVB (TVB 18 -1 C °C 9 dias disso centesimal lipídios (CJMS 1 -

ABSTRACT: The captive breeding of the Pantanal caiman (Caiman yacare) offers great potential for the full use of all the component parts of the animal. The meat is an option for human consumption with good sensory acceptance, the skin is valued on the international market and the carcass can be used for obtaining mechanically separated caiman meat (MSCM). This research evaluated the physical chemical parameters of mechanically separated meat obtained from caiman yacare carcass to improve its yield. The proximate composition, lipid oxidation, pH, total volatile bases (TVB) and color during storage under freezing at -18 °C for 90 days were all evaluated. The MSCM presented low lipid content, high protein content and good stability during storage under freezing for 90 days. These results demonstrated that MSCM can be used in the development of caiman meat products. ABSTRACT Caiman animal acceptance MSCM. . (MSCM) yield composition oxidation pH TVB (TVB 18 -1 C 9 products (MSCM 1 -

ABSTRACT The demand for clean label foods has driven research in the meat product sector. The objective of this study was to evaluate the effect on the physicochemical properties of adding L-lysine, wheat fiber (WTF) and microcrystalline cellulose (MCC) in sausage without the addition of sodium tripolyphosphate (STPP) and with reduced salt levels. Eight treatments were produced in total. Three control treatments were: CON1 - 0.5 % sodium tripolyphosphate and 2 % salt; CON2 - without STPP and 2 % salt; CON3 - without STPP and 1 % salt. Five other treatments were carried out without STPP and 1 % of salt: LYS - 0.8 % L-lysine; WTF - 2 % wheat fiber; MCC - 2 % microcrystalline cellulose fiber; LYSWTF - 0.8 % L-lysine and 2 % wheat fiber; LYSMCC - 0.8 % L-lysine and 2 % microcrystalline cellulose fiber. L-lysine and wheat fiber provided good emulsion stability for sausages. L-lysine and MCC increased the yield of the products. Microcrystalline cellulose increased the red color value (a*) of sausages. The intensity of the yellow color value (b*) was significantly affected by the removal of STPP and the reduction of salt levels, but L-lysine and MCC improved this parameter, providing similar results to CON1. Adding of L-lysine and dietary fiber increased hardness in sausages without added STPP and with salt reduction. L-lysine and wheat fiber are promising for reformulating emulsified meat product without phosphate added and with reduced salt levels due to lipid oxidation control and improvement in emulsion stability.

ABSTRACT: The use of natural colorants in meat products can keep its coloring attractive as well as meet the demand from consumers interested in products that are healthier. Nitrite is added as a preservative to these products and it is also a precursor of the generation of a specifically desired color in meat products. However, its use has been associated with the development of certain kinds of cancer. The objective of this study was to evaluate the effect of reduced levels of nitrite in Brazilian sausage (linguiça) with natural colorants on the physicochemical and sensorial properties following frozen storage. Nine treatments were tested: 0.015 % nitrite (C150), 0.0075 % nitrite (C75) and 0 % nitrite (C0), 0.0075 % nitrite and 1.5 % microencapsulated betalain (BME75), 0 % nitrite and 1.5 % microencapsulated betalain (BME0), 0.0075 % nitrite and 0.19 % commercial betalain (BCP75), 0 % nitrite and 0.19 % commercial betalain (BCP0), 0.0075 % nitrite and 0.02 % of cochineal carmine (CC75) and 0 % nitrite and 0.02 % of cochineal carmine (CC0). Oxidative stability, residual nitrite and instrumental color were the determinant factors. Sensory analysis was directed at color, texture, taste and global acceptance. Natural colorants did not have any antioxidant effect. Sausages prepared with betalain and 0.0075 % nitrite showed the highest a* values. The addition of colorants improved both color and overall acceptance. The addition of betalain and cochineal carmine with 0.0075 % nitrite proved to be effective in achieving high acceptability in Brazilian sausage (linguiça).

ABSTRACT: Cuts of muscle (biceps femoris) from three crossbreeds between the Nelore, Angus and Wagyu breeds of cattle (Crossbreed 1 (C1): ½ Angus and ½ Nelore; Crossbreed 2 (C2): ¾ Angus and ¼ Nelore; Crossbreed 3 (C3): ½ Wagyu, ¼ Nelore and ¼ Angus) were characterized by their chemical composition, pH, water activity and lipid oxidation. The cuts were submitted to wet brining in a 5 % NaCl concentration at 5 °C with either static brine (SB) or brine assisted with ultrasound (US). Samples of the treatments were taken after 30, 60, and 120 min of wet brining for later analysis. The experimental data were adjusted using the Peleg and Page models, and the Page template best described the experimental data. The crossbreeding did not affect the water and ash content; however, it significantly affected the levels of lipids and proteins. C3 presented higher fat content than C2, which, in turn, was higher than C1. C1 had higher protein content than C2, which had more protein than C3. When ultrasound was applied, crossbreeding influenced the water content and the water absorption rate during brining, which had the highest values for the highest protein content. The crossbreeding and ultrasound application also affected the NaCl content of the cuts. However, only ultrasound application increased the rate of NaCl absorption during wet brining. The results demonstrate that ultrasound accelerates the mass transfer in wet brining of the cuts of beef, regardless of the crossbreeds studied.

Abstract Rabbit meat has a low-fat content when compared to other meat traditionally used as raw material in the processing of fermented sausages. In addition, it has high levels of essential amino acids in its composition. Thus, the objective of this study was to evaluate the technological properties and sensorial acceptance of a fermented sausage produced with pork and rabbit meat. Three formulations were made: C1 (80% fresh lean pork + 20% pork back fat), T1 (40% fresh lean pork + 40% rabbit meat + 20% pork back fat) and T2 (80% rabbit meat + 20% pork back fat). Samples were evaluated for composition, texture profile, instrumental color, pH, weight loss, lipid oxidation and sensorial acceptance. The samples did not present significant differences between them for moisture, fat and protein contents. Regarding the aroma, flavor, hardness and overall acceptance, all samples presented similar mean values (P>0.05). The study showed that up to 40% of rabbit meat could be substituted in a fermented pork sausage without altering any of the sensorial attributes evaluated and with minimal effect on the technological parameters.

Abstract Sausage is one of the meat products most consumed in Brazil, although the incorporation of fat is necessary for its elaboration, influencing its technological and sensory characteristics and its caloric value. The aim of this study was to evaluate the addition of resistant starch as a fat substitute in sausage on physicochemical properties and sensory acceptance. The analyses performed were the centesimal composition, emulsion stability, instrumental colour, texture profile analysis and sensorial acceptance. The resistant starch was evaluated for thermal properties, demonstrating that it required a high temperature for gelatinization, indicating that there was probably no gelatinisation of the starch in the cooking of the sausages. There was a significant difference between the treatments T1 and T2 with partial fat reduction and caloric value reduction. The study showed that the partial fat reduction positively influenced the reduction of caloric value, emulsion stability, colour parameters and texture profile analysis. All treatments were well accepted by the consumers. The incorporation of resistant starch in sausages did not influence the centesimal composition, texture profile analysis and sensory analysis, showing it to be a promising ingredient in the making of healthier meat products.

Abstract This study was focused on the determination of the chemical composition and experimentally obtaining the sorption isotherms for four samples of commercial cooked ham subjected to simulated commercial storage conditions. The isotherms were determined using the gravimetric method. The mathematical models of Guggenhein, Anderson and de Boer; Brunauer, Emmett and Teller; Halsey; Henderson; and Peleg were fitted to the experimental data. The Guggenhein, Anderson and de Boer model was chosen to best describe the isotherms as it had a very good fit. The increase in temperature reduced the equilibrium moisture content of the product. Increased relative humidity resulted in an increase in equilibrium moisture content of the product regardless of storage temperature. The differences in chemical composition between the samples affect the desorption isotherms. The higher the content and availability of the protein or the lower the fat content, the higher the equilibrium moisture content of the product.

Abstract The aim of this study was to optimize the addition of oat fiber and inulin as fat substitutes in cooked Paio sausage using response surface methodology. The chemical composition, textural parameters, color properties, lipid oxidation, microbial analysis and sensory properties were assessed in twelve different treatments. The addition of dietary fiber led to a significant (P < 0.05) increase in moisture content and also a decrease in fat content of between 60.78% and 63.16%. Color parameters were significantly affected by the addition of inulin and oat fiber, as lightness decreases with the addition of oat fiber. Similar happened with redness, the lowest results were for the treatment with higher dietary fiber content added. Regarding lipid oxidation, the inclusion of fiber did not influence the TBARS values among treatments and throughout the storage time. Sausages manufactured with inulin and oat fiber present similar scores for color, taste and overall acceptability, while lower texture values were found in sausages manufactured with oat fiber. The addition of up to 6% of inulin with up to 0.85% oat fiber in a low fat cooked Paio sausage did not compromise technological parameters and sensory acceptably.

Abstract Inulin, fructooligosaccharide, oat fiber and wheat fiber were added at 3 and 6% level in low-fat beef burger and their performances were evaluated. The low-fat beef burgers were submitted to cooking losses, objective color, texture profile, TBARS value, pH, microbiological and sensory evaluations. FR3, FR6, IN3 e IN6 showed no difference from the control to yield. Hardness values increased in OF6, WF3 and WF6 and it was similar to control. WF6 was the lowest score for the overall acceptance. Higher yield and hardness were found with the addition of insoluble fibers at 6% level. The TBARS values were not influenced by the addition of dietary fibers in low-fat beef burger. Inulin at 6% (IN6) level showed the highest score for all the sensory attributes. Adding 6% inulin was shown the best alternative for use in low-fat beef burger.

Abstract Non-meat ingredients have been added as extenders to variety of meat products, such as beef burger, to improve some properties. Textured soy protein (TSP), collagen (CL) and maltodextrin (MD); and their combinations (TSPCL, TSPMD, CLMD and TSPCLMD) were added to beef burgers and then the effect on physicochemical and sensory properties was evaluated. MD and TSPMD presented higher yield and TSPMD showed lower value for the shrinkage analysis; these results showed the positive influence of the maltodextrin in reducing water loss. CL and TSPCL were harder than the control treatment. CLMD had higher approval in sensorial acceptance than MD and TSPCL. The addition of these extenders in the beef burgers improved the cooking properties, texture and sensorial acceptance, showing the importance of the addition of these ingredients to the final product.

Abstract Sodium chloride in meat products provides microbiological stability and desirable technological and sensory effects. Therefore, the reduction of this ingredient is a challenge for the meat industry. The objective of this study was to evaluate the physicochemical and sensory characteristics of ready-to-eat sliced frozen roast beef with partial replacement of sodium chloride by a commercial additive mostly composed of potassium chloride. The analyses performed were chemical composition, cooking yield and post defrosting loss, microbiological evaluation and sensory analysis. There was higher moisture content (p < 0.05) in the control treatment (without the presence of the replacement additive) and all treatments were not different (p ≥ 0.05) in the cooking yield and in post-defrosting loss. The results of microbiological analysis are according to Brazilian Legislation. The sensory evaluation showed no difference between the control treatment and the T1 treatment (with the reduction of 35% of NaCl), while the T2 treatment (with reduction of 70% of NaCl) had the lowest average values in all attributes. The study showed that the reduction of 35% NaCl for commercial additive, mostly composed of potassium chloride, in roast beef is feasible since no changes were observed in sensory and technological characteristics evaluated.

Resumo Novos produtos cárneos de fácil preparo e com apelo de mais saudáveis têm sido desenvolvidos para satisfazer consumidores que buscam por praticidade aliada à redução nos teores de gordura e sal. Novos ingredientes são testados para causar menos impacto na textura, no rendimento e em outras propriedades físico-químicas destes produtos. O presente estudo teve como objetivo avaliar a adição de fibra de aveia sobre as propriedades físico-químicas de hambúrgueres cozidos e congelados de carne bovina e carne mecanicamente separada de frango, com redução de gordura e sal. Foram determinados a composição centesimal dos hambúrgueres, perfil de textura, rendimento, encolhimento, rendimento após o aquecimento por micro-ondas, além da determinação da cor objetiva durante estocagem sob congelamento. A adição de 6% de fibra de aveia em hambúrguer de carne bovina e carne mecanicamente separada de frango com redução da adição de gordura e de sal aumentou o rendimento, diminuiu a perda de peso durante o aquecimento por micro-ondas e melhorou a estabilidade da cor durante a estocagem sob congelamento por 60 dias. Tanto os hambúrgueres com adição de 3% como de 6% de fibra de aveia tiveram valores para dureza, mastigabilidade e coesividade similares ao controle, com adição de gordura e sem redução de sal. Houve redução de 35% no teor de gordura para os tratamentos com adição de fibra de aveia, em relação ao controle, com adição de gordura e sem redução de sal. A fibra de aveia pode ser considerada um ingrediente promissor para auxiliar formulações de produtos cárneos com redução de sal e gordura.

Summary New, healthier and easy to prepare meat products have been developed in order to satisfy consumers looking for convenience together with reduced fat and salt contents. New ingredients are tested to cause less impact on the texture, yield and other physicochemical properties of these products. This study aimed to evaluate the addition of oat fiber on the physicochemical properties of cooked and frozen hamburgers made from beef and mechanically deboned chicken meat with reduced fat and salt contents. The analyses carried out were the proximate composition, texture profile, yield, shrinkage and yield after heating in a microwave oven, besides the determination of instrumental colour during storage. The addition of 6% oat fibre to the hamburgers made from beef and mechanically deboned chicken meat with reduced fat and salt contents, increased the yield, decreased the weight loss during microwave heating and improved the colour stability during 60 days of frozen storage. Both the hamburgers with 3% and 6% of added oat fibre showed values for hardness, cohesiveness and chewiness similar to those of the control with added fat and no salt reduction. There was a reduction of 35% in the fat content for the treatments with added oat fibre as compared to the control with added fat and no salt reduction. Oat fibre can be considered a promising ingredient to assist the formulation of meat products with reduced salt and fat contents.

The objective of this work was to study the effect of adding wheat fiber and partial pork back fat on the quality characteristics of bologna sausage. The compound central rotating design was used with treatments containing fixed levels of inulin (5%) and oat fiber (1%) and variable levels of wheat fiber (0-4%) and pork back fat (0-10%). The pH and protein were similar in all the treatments, the fat was lower than the control treatment and the moisture content was higher than the control treatment (CF) without fibers. The wheat fiber increased the hardness and reduced cohesiveness and scores were given for overall impression. We found that it was possible to prepare low-fat bologna sausage with the addition of 6.58% fiber (5% inulin, 1% oat fiber and 0.58% wheat fiber), whilst retaining good sensory acceptability, thus reducing the pork back fat levels by between 25 and 42.75%.

The impact of sodium chloride reduction and its substitution for micronized salt on consumer acceptance of turkey ham was investigated. Five formulations - F1 (control - 2.0% NaCl), F2 (1.7% NaCl), F3 (1.4% NaCl), F4 (1.7% micronized NaCl), and F5 (1.4% micronized NaCl) - were evaluated with respect to sodium chloride content and by consumers using a nine-point hedonic scale for overall acceptability and CATA (check-all-that-apply) using 24 sensory descriptors. Trained panelists characterized the products using the flash profiling technique. Reductions in the salt content by up to 30% did not affect the overall acceptability of the samples by the consumers. However, the consumers characterized the formulations with lower salt content as "less salty and less seasoned" in comparison to the contents in the control. Products containing 1.7% NaCl were considered very similar to the control. The results obtained indicate that it is possible to reduce NaCl content by 30% without affecting consumer acceptance of the product. The use of micronized salt did not affect the sensory characteristics when compared with those of formulations containing the same level of sodium chloride indicating that micronized salt does not influence perception of salt.