RESUMO O resíduo de refino de bauxita (lama vermelha) é um resíduo importante gerado na produção de alumínio, podendo ser utilizado como adsorvente de baixo custo. Este estudo teve como objetivo investigar a influência do tratamento térmico na adsorção do corante azul reativo (RB19) por lama vermelha, comparando com a capacidade de adsorção de lama vermelha não tratada termicamente. O tratamento térmico da lama vermelha até 500°C resultou em aumento da capacidade de adsorção, variando seu valor de 357 mg g-1 (lama vermelha não tratada) a 416 mg g-1, em condições ácidas. No entanto, amostras de lama vermelha tratadas termicamente a 600 e 800°C mostraram uma redução na capacidade de adsorção, chegando a 337 mg g-1 em meio ácido. A mudança na capacidade máxima de adsorção de RB 19 na lama vermelha tratada termicamente está associada a valores de área superficial específica. Assim, é possível concluir que a lama vermelha tratada termicamente em 500°C pode ser utilizada para o tratamento de água e águas residuárias com maior eficiência do que a lama vermelha natural nas indústrias têxteis, contribuindo para novos insights sobre possíveis aplicações na indústria têxtil.

ABSTRACT Red mud, a waste product generated during alumina extraction from bauxite, could be used as a low-cost adsorbent. Here, the effect of thermal treatment on the adsorption of Reactive Blue 19 (RB19) dye by red mud was compared with the adsorption capacity of untreated red mud. Thermal treatment of red mud at 500°C results in an increase in adsorption capacity from 357 mg g-1 (untreated red mud) to 416 mg g-1, under acidic conditions. Red mud samples thermally treated at 600°C and 800°C show a reduction in adsorption capacity, however, falling to 337 mg g-1, in acid medium. The change in the maximum adsorption capacity of red mud to RB19 following thermal treatment is associated with specific surface area. Red mud subjected to 500°C can be used for the treatment of water and wastewaters with a higher efficiency than untreated red mud, thus finding possible application in the textile industry.

RESUMEN Objetivo: Este estudio tiene como objetivo: describir las intervenciones del enfermero de rehabilitación en términos de Kinesiterapia Respiratoria en los pacientes con COVID-19 sobre ventilación mecánica y oxigenación com membrana extracorpórea, analizando la respuesta en términos de parámetros gasométricos y ventilatorios antes y después de cada sesión. Método: Estudio de caso de un paciente de 63 años con antecedentes patológicos de obesidad y hipertensión arterial. Se recopilaron datos retrospectivos del proceso clínico, durante una permanência en UCI de 38 días. Resultados: Las técnicas más utilizadas en Kinesiterapia Respiratoria fueron, la aspiración de secreciones en circuito cerrado, vibraciones, descompresión repentina, aberturas costales selectivas, espiración manual forzada, ventilación dirigida y in-exsuflador mecánico. En todas las sesiones, hubo una mejoria en los volúmenes inspiratorio y espiratorio, así como en la compliance estática. El in-exsuflador mecánico se inició después de una semana de hospitalización, después de agotarse todas las intervenciones posibles, siendo que todos los resultados mostraron mejoras globales, sin eventos adversos. Conclusión: La implementación de intervenciones de kinesiterapia respiratoria estructuradas e individualizadas puede contribuir significativamente en la recuperación de un paciente en una situación crítica, habiendo sido utilizadas técnicas que aín no se han descrito para los casos de COVID-19 de manera efectiva.

RESUMO Objetivo: Este estudo tem como objetivo: descrever as intervenções do enfermeiro de reabilitação em termos de Cinesiterapia Respiratória na pessoa com COVID-19, com ventilação mecânica e em oxigenação extra-corpórea por membrana, analisando a resposta em termos de parâmetros gasométricos e ventilatórios antes e após cada sessão. Método: Estudo de caso de uma pessoa com 63 anos, com antecedentes de obesidade e hipertensão arterial. Realizou-se colheita de dados retrospetiva de processo clínico, referente a um período de internamento em UCI de 38 dias. Resultados: As técnicas mais utilizadas na Cinesiterapia Respiratória foram a aspiração de secreções em circuito fechado, vibrações, descompressão brusca, aberturas costais seletivas, expiração manual forçada, ventilação dirigida e in-exsuflador mecânico. Na globalidade das sessões, verificou-se uma melhoria nos volumes inspiratórios e expiratórios, assim como melhoria na compliance estática. Começou a usar-se o in-exsuflador mecânico ao fim de uma semana de internamento, depois de se esgotarem todas as intervenções possíveis, sendo que todos osoutcomesapresentaram melhorias globais, sem eventos de adversos. Conclusão: A implementação de intervenções de cinesiterapia respiratória estruturadas e individualizadas, podem contribuir significativamente na recuperação da pessoa em situação crítica, tendo-se usado com eficácia técnicas que não estavam descritas para casos COVID- 19.

ABSTRACT Aim: This study aims to describe rehabilitation nurse interventions in Respiratory Kinesitherapy in critically ill with COVID-19 patient undergoing venovenous extra-corporeal membrane oxygenation and its response concerning to gasometric and ventilatory parameters before and after each session. Methodology: Case study of a 63-year-old person with history of obesity and high blood pressure. Retrospective data were collected from the clinical process, referring to a 38-day ICU stay. Results: The most performed techniques used in Respiratory Kinesitherapy by rehabilitation nurses were suctioning through closed system, vibrations, sudden decompression, selective costal openings, forced manual expiration, directed ventilation and mechanical in-exhaler. Globally, all sessions showed that there was an improvement in inspiratory and expiratory volumes, as well as in static compliance. Machanical in-exhaler was used after a week of hospital stay, after all other possible interventions were performed, and all outcomes showed global improvements, without any adverse events. Conclusion: Implementation of structured and individualized respiratory kinesitherapy interventions can significantly benefit recovery of critical ill patients. Techniques that weren´t described for covid 19 cases were used effectively.

RESUMO Os corantes reduzem significativamente a penetração da luz solar no corpo d’água e, consequentemente, afetam a fotossíntese e a transferência de oxigênio. Realizaram-se modelagens experimental e analítica da remoção do azul reativo 19 por ozônio. Para isso, avaliaram-se os atributos e a taxa mássica por ensaios em batelada. A eficiência de remoção foi de 64 para 94% quando a dose de ozônio aumentou de 38,4 para 153,6 mg O3.L-1. Os resultados mostraram que o azul reativo 19 é removido mais eficientemente em pH inicial da solução de 7. A taxa de remoção do azul reativo 19 reduziu à medida que a sua concentração inicial aumentou. Os estudos cinéticos mostraram que a ozonização do azul reativo 19 é uma reação de pseudoprimeira ordem em relação ao corante e a constante cinética aparente decai logaritmicamente com a concentração inicial de corante. A análise empírica indica que a taxa mássica ao longo do tempo pode ser descrita adequadamente por uma equação de potência, e os estudos analíticos sugerem que o processo é influenciado pela transferência de massa tanto no filme líquido quanto na massa líquida.

ABSTRACT Dyes highly reduce sunlight penetration into the stream, and consequently affect photosynthesis and oxygen transfer into water bodies. An experimental and analytical modelling approach to Reactive Blue 19 (RB19) removal using ozone was carried out. For this purpose, factors and mass ratio analyses were assessed based on batch assays experiments. Removal efficiency increased from 64 to 94% when the dosage increased from 38.4 to 153.6 mg O3.L-1. Results showed that RB19 is more efficiently removed when initial pH is 7. The rate of RB19 removal decreased as the initial dye concentration increased. Kinetic studies showed that the ozonation of RB19 was a pseudo first-order reaction with respect to the dye, and the apparent rate constant declined logarithmically with the initial dye concentration. Mass ratio studies showed that, for the empirical analysis, the power law equation was adequate to describe mass ratio over time and the analytical analysis suggests that the process is influenced by mass transfer in the liquid film as well as in the bulk fluid.

RESUMO Vários minerais e resíduos industriais têm sido estudados para uso como adsorvente, entre eles a lama vermelha e a anidrita. A lama vermelha é um resíduo insolúvel gerado em grande quantidade durante o processamento da bauxita. A anidrita é um sulfato de cálcio (CaSO4) cristalizado sob a forma rômbica e usada como matéria-prima na indústria. Nesta investigação, a capacidade de adsorção de Cd2+, Ni2+ e Zn2+ pela anidrita e pela lama vermelha foi avaliada usando isotermas de adsorção de Langmuir e Freundlich. Os materiais empregados apresentaram adsorção ≥75±1% para todos os metais em soluções aquosas com concentração de 0,5 mmol.25 mL-1. As isotermas baseadas no modelo de Langmuir foram as mais apropriadas para descrever o fenômeno de remoção de Cd2+, Ni2+ e Zn2+ para a anidrita e a lama vermelha, com valores de capacidade máxima de adsorção de 0,47 e 0,51 mmol.g-1 para o Cd2+, 1,18 e 1,56 mmol.g-1 para o Ni2+ e 0,84 e 1,47 mmol.g-1 para o Zn2+, respectivamente. Esses valores foram superiores a outros valores exibidos por materiais empregados como adsorventes descritos em estudos prévios.

ABSTRACT Various minerals and industrial waste have been studied for use as an adsorbent, in particular the anhydrite and the red mud. The red mud is an insoluble residue that is generated in large quantities during the processing of bauxite. The anhydrite is a calcium sulfate (CaSO4), crystallized as a rhombic way, and used as raw material in the industry. In this study, the Cd2+, Ni2+ and Zn2+adsorption capacity by anhydrite and by red mud was evaluated using adsorption isotherms obtained by the Langmuir and Freundlich models. The materials used showed adsorption ≥75±1% for all metals in aqueous solutions with a concentration of 0.5 mmol.25 mL-1. The Langmuir isotherm was more appropriate to describe the phenomenon of Cd2+, Ni2+ and Zn2+ removal, with highest adsorption capacity at 0.47 and 0.51 mmol.g-1 for Cd2+, 1.18 and 1.56 mmol.g-1 for Ni2+, and 0.84 and 1.47 mmol.g-1 for Zn2+, respectively. These values were higher than those ones obtained for other materials described in previous studies.

ABSTRACT: High growth rate is one of the criteria used for the selection of species to be used in metal phytoextraction programs. This study was carried out to characterize the growth characteristics of sunflower (Helianthus annuus L.), castor bean (Ricinus communis L.), corn (Zea mays L), and vetiver [Vetiveria zizanioides (L.) Nash] grown on a soil contaminated with lead (Pb), with and without pH correction, to improve agronomic practices regarding phytoremediation programs. The experiment was designed as a randomized block with four replications; treatments were arranged in a split-plot arrangement, with the main plot representing the species (sunflower, castor bean, corn, and vetiver), with or without pH correction and soil fertilization, and the split-plot representing harvest periods (60, 90, and 120 days after planting). After variance analysis and mean comparison analysis of the data by the Tukey test (p≤0.05), a significant effect was observed from soil pH correction for vetiver in all of the growth variables evaluated, except for the leaf area index at 120 days after planting (DAP). Castor bean and sunflower plants in soil with high acidity conditions, without pH correction (pH˂4.0), were affected by soil Pb levels. Corn plants benefited from soil pH correction and had improved results for the plant height, diameter, and leaf area variables at 60 and 90 DAP, as well as leaf area index at 60 DAP. There was no increase in these variables between the harvest periods evaluated. Regarding phytoextraction potential, corn and vetiver had the highest Pb translocation to the plant shoots at 90 DAP and were therefore considered the most suitable species for phytoremediation of the area under study. Overall, liming was essential for improving species biomass production for all the species studied in soils with high Pb availability in solution.

In this paper, we propose the production of ceramic protective thin films by plasma electrolytic oxidation using red mud-containing electrolytes. The treatments were performed through the application of pulsed voltage (600 V, 200 Hz) during 300 seconds to aluminum samples immersed in electrolytic solutions with 5 g of red mud per liter of distilled water. The coatings were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (EDS) and contact angle and surface energy measurements. The final current density during the experiments was 0.05 A/cm² and films as thick as 9.0 µm have been obtained. XRD patterns have clearly shown the incorporation of species from the red mud on the coating.

During the extraction of aluminum from bauxite, a waste of oxides containing traces of heavy metals in a highly alkaline matrix, called Red Mud (RM), is produced. In this study RM is characterized and the feasibility of using it as a precursor for the production of thin films by Plasma Sputtering and by Plasma Immersion Ion Implantation and Deposition (PIIID) is demonstrated. The chemical structure and composition, surface morphology, topography, and wettability of the films prepared using such methodologies were investigated. The films consist mainly of the elements aluminum, silicon, iron and carbon. Infrared spectroscopic analyses reveal the presence of C=O, C-H2, Fe(OH), Al-O and Si-C functionalities. RF Sputtering produced films with smoother surfaces, whereas PIIID produced granular surface structures. Surface contact angle measurements showed that despite the presence of oxides and hydroxides, the films are hydrophobic, thus exhibiting an interesting link between the physical and thermodynamical properties.

Adsorption of Reactive Blue 19 dye onto activated red mud was investigated. Red mud was treated with hydrogen peroxide (LVQ) and heated at both 400 ºC (LVQ400) and 500 ºC (LVQ500). These samples were characterized by pH, specific surface area, point of zero charge and mineralogical composition. Adsorption was found to be significantly dependent on solution pH, with acidic conditions proving to be the most favorable. The adsorption followed pseudo-second-order kinetics. The Langmuir isotherm was the most appropriate to describe the phenomenon of dye removal using LVQ, LVQ400 and LVQ500, with maximum adsorption capacity of 384.62, 357.14 and 454.54 mg g-1, respectively.

Em leguminosas tropicais, a cuidadosa seleção de estirpes de rizóbio, entre outros fatores, é fundamental para a eficiência da fixação biológica de N2 (FBN). Essa seleção deve ser feita para as leguminosas de interesse social e econômico, entre elas o feijão-fava (Phaseolus lunatus L.). O objetivo deste trabalho foi avaliar a eficiência simbiótica de rizóbios nativos de duas regiões do Piauí produtoras de feijão-fava. Foram avaliados 17 isolados e duas estirpes de referência (CIAT 899 e NGR 234), em casa de vegetação, utilizando-se vasos de Leonard autoclavados, no delineamento experimental inteiramente ao acaso, com três repetições. O genótipo de feijão-fava utilizado foi o UFPI-468. A inoculação foi feita por ocasião do plantio. A coleta foi realizada aos 34 dias após o plantio, sendo avaliadas as seguintes características: matéria seca da parte aérea (MSPA), da raiz (MSR) e dos nódulos (MSN); relação MSPA/MSR; N acumulado (Nac) na MSPA e a eficiência da fixação de N2. Foi observada diferença significativa entre os isolados em todas as características, exceto em MSR. Em geral, os isolados ISO-18, ISO-23, ISO-24, ISO-25, ISO-30, ISO-32, ISO-35, ISO-36, ISO-43 e ISO-45 apresentaram os melhores índices de MSPA, MSR, MSPA/MSR, Nac e eficiência da fixação de N2, em relação aos isolados ISO-2, ISO-9, ISO-16, ISO-40 e testemunha absoluta. As características avaliadas foram suficientes para discriminar e selecionar isolados eficientes na nodulação em feijão-fava, contribuindo para a efetividade da FBN. Os melhores isolados apresentaram bom desempenho no fornecimento de N às plantas, podendo ser recomendados para testes de eficiência agronômica.

In tropical legumes, a careful selection of rhizobia strains, among other factors, is essential for the efficiency of biological nitrogen fixation (BNF). This selection should be made for leguminous crops of social and economic interest, such as lima bean (Phaseolus lunatus L.). The aim of this study was to evaluate the symbiotic effectiveness of rhizobia from two regions of Piauí producing lima bean. Seventeen isolates and two reference strains CIAT 899 and NGR 234 were evaluated on the fava bean genotype "UFPI-468". The study was conducted in a greenhouse in autoclaved Leonard jars, in a randomized block design with three replications. Inoculation was done at planting. Samples were collected 34 days after planting to assess the following variables: shoot dry mass (SDM), root (MRS) and nodules (MNS), ratio SDM/MRS, accumulated nitrogen (Nac) in SDM by the Kjeldahl method, and N2-fixation efficiency. Significant interactions were observed among all variables except for MSR. In general, the values for DMAP, MRS , DMAP/MRS, Nac and N2-fixation efficiency of the isolates ISO-18, ISO-23, ISO-24, ISO-25, ISO-30, ISO-32, ISO-35, ISO-36, ISO-43, and ISO-45 were higher than of ISO-2, ISO-9, ISO 16, and ISO-40 and the absolute control. The variables used in this study were sufficient to discriminate and select nodulation-efficient strains for lima bean, increasing the effectiveness of BNF. Most isolates performed well in terms of N supply to plants and can be recommended for tests of agronomic efficiency.

Two sampling points were chosen and forty samples were collected between January and December 2006 at Alto Sorocaba basin. The rainwater pH varied from 5.46 to 6.36 (Ibiúna) and 5.26 to 6.81 (Itupararanga), being Ca2+ the main ion responsible for controlling the rainwater pH. The ionic concentrations decreased in the following order: Ca2 +>Na+> Mg2+>K+ for cations and SO4(2-)>HCO3->NO 3->Cl- >PO4(3-) for anions. The annual atmospheric deposition appeared to be controlled mostly by following sources: mining activities and cement factories (Ca2+ and HCO3-), natural soil dust (Na+, Mg2+ and HCO3-), fossil fuel burning (SO4(2-)) and agriculture activities (K+, NO3- and PO4(3-)).

The objective of this research is to understand the experiences of women victims of domestic and family violence, understanding the use of the Maria da Penha Law as a form of empowerment. Also, develop a social context and help to spread the knowledge of viable methods to combat it, especially the Maria da Penha Law. It is known that violence against women is the result of individual characteristics, contextual and environmental factors that, if present, increase the possibility. Are cited the ages, marital status or personality of individuals, living habits and the abuse of alcohol and illicit drugs, the social integration of the family involving low income, poor education and unemployment, or the role of gender in family relationships -- either present or historical in families. The goal is to help enrich the repertoire of the violence against women, offering subsidies for the establishment of public policies in several areas to minimize the problems of violence.

In this work commercial filters papers were organomodified with tetraethylorthosilicate (TEOS) and 3-aminopropyltriethoxysilane (3-APTS), aiming at the development of a new analytical procedure for in-situ speciation of labile and inert metal species in aquatic systems. Parameters that exert influence on the metal lability such as pH, chelating time, concentration and characteristics of the organic matter were studied in the laboratory using tests for metal recuperation. The results showed slower kinetics for Cu ion than for Ni, Mn and Cd in the absence of aquatic humic substances (AHS). The relative lability observed for complexed metals in aquatic humic substances using organomodified filter papers was Cu>>Cd>Ni>Mn. The pH values, structural characteristics and concentration of AHS exert strong influence on the lability of the metals. The results obtained showed that the utilization of organomodified filter papers can be an interesting and promising alternative for in situ characterization of metal lability in aquatic systems.