SUMMARY: Micro-implant stability has always been the focus of orthodontic clinical research.In the experiment, the morphological changes of bone tissue around the micro-implants in self-tapping and assisting implantation were investigated to explore the effect of different implantation on the osseointegration of micro-implants in order to provide some theoretical basis for clinical practice. Six adult male Beagle dogs were selected,three implants were implanted into the left and right maxillary bone of Beagle dogs at the 0th, 4th and 6th week, respectively. One side to self-tapping implantation, the opposite side to assisting implantation. At the 8th week of the experiment, the animals were sacrificed and the micro-implant-bone tissue specimens with the healing time of 8w, 4w and 2w were obtained.The specimens were stained with Toluidine Blue (TB) and photographed under 100X, 200X microscope. Morphology of microimplant- bone interface cells was observed under light microscope. In self-tapping group, there were some fibrous tissues surrounding the micro-implants at the 2th week, the formation of osteoblasts and osteoid was observed at the 4th week, the wavy and lamellar bone tissues were seen at the 8th week.In assisting group,more collagen fibers were deposited around the micro-implant at the 2th week, there were a large number of osteoid-like cells, and the collagen was gradually replaced by the bone tissue at the 4th week, the osteoblasts were active and the osteoblasts were linear arrange and form a laminate bone at the 8th week.Whether implanted self-tapping or assisted implantation, micro-implant-bone interface reconstruction can occur. If the clinical need for early loading force, micro-implant try to choose selftapping implantation. By appropriately prolonging the healing time, the initial stability of the micro-implant under assistive implantation can be improved.

RESUMEN: La estabilidad del microimplante siempre ha sido el foco de la investigación clínica en ortodoncia. En este trabajo se investigaron los cambios morfológicos del tejido óseo alrededor de los microimplantes autorroscantes y se ayudó a la implantación para explorar el efecto de diferentes implantes en la osteointegración de microimplantes con el fin de proporcionar alguna base teórica para la práctica clínica. Se seleccionaron seis perros Beagle machos adultos, y se colocaron tres implantes en los huesos maxilares izquierdo y derecho en la 0ª, 4ª y 6ª semana, respectivamente. De un lado se colocó el implante autorroscante, y del otro lado el implante asistido. En la octava semana, se sacrificaron los animales y se obtuvieron las muestras de microimplante-hueso con el tiempo de cicatrización de 8, 4 y 2 semanas. Las muestras fueron teñidas con azul de toluidina (TB) y fotografiadas bajo aumento de 100X, y microscopio de 200X. La morfología de las células de la interfaz microimplante-hueso se observó bajo microscopio óptico. En el grupo autorroscante, había tejido fibroso que rodeaba los microimplantes a la 2ª semana, se observó la formación de osteoblastos y osteoide a la 4ª semana y de tejido óseo ondulado y lamelar a la 8ª semana. En el grupo asistido, se depositaron más fibras de colágeno alrededor del microimplante en la 2ª semana, hubo un gran número de células similares a osteoide, y el colágeno fue reemplazado gradualmente por el tejido óseo en la 4ª semana; los osteoblastos estaban activos y se ubicaron linealmente formando un hueso laminado en la 8ª semana. Ya sea que el implante sea con autoasistencia o con implantación asistida, puede ocurrir la reconstrucción de la interfaz microimplante-hueso. Si existe la necesidad clínica de una fuerza de carga temprana, el microimplante de elección sería la implantación autorroscante. Al prolongar apropiadamente el tiempo de curación, se puede mejorar la estabilidad inicial del microimplante bajo implantación asistida.

RESUMO: Os reguladores de crescimento das plantas são um imenso grupo de substâncias que têm a capacidade de alterar o padrão de crescimento das plantas e podem ser utilizadas para melhorar o crescimento e a produtividade das plantas. Foi realizado um estudo nas pastagens de Xilin Gol, na Mongólia Interior (China), para determinar o crescimento e a produção de biomassa de Stipa krylovii em resposta à aplicação exógena de diferentes reguladores de crescimento em várias concentrações, a saber: ácido naftaleno acético (NAA), 6-benzilaminopurina (6-BA), brassinosteroide (BR), nitrofenolato de sódio (SNP) e forchlorfenuron, e ácido giberélico (GA3). A aplicação de reguladores de crescimento aumentou de forma significativa o crescimento e a produção de biomassa de S. krylovii. Houve melhora na altura do eixo vegetativo pela aplicação de 100 mg L-1 de GA3, ao passo que a altura do eixo reprodutivo foi aumentada nas concentrações de 25 mg L-1 de 6-BA, 100 mg L-1 de SNP + 5 mg L-1 de forchlorfenuron e 50 mg L-1 de SNP + 2,5 mg L-1 de forchlorfenuron, em comparação com a testemunha. Houve aumento da biomassa fresca com a aplicação de 0,02 mg L-1 de BR, 10 mg L-1 de SNP + 0,5 mg L-1 de forchlorfenuron e 50 mg L-1 de SNP + 2,5 mg L-1 de forchlorfenuron. A aplicação de 5 mg L-1 de 6-BA e 50 mg L-1 de SNP + 2,5 mg L-1 de forchlorfenuron mostrou-se mais benéfica no aumento da biomassa seca de S. krylovii, em comparação com a testemunha. Em conclusão, a aplicação exógena de diferentes reguladores de crescimento melhorou o crescimento e produção de biomassa de S. krylovii. Além disso, a aplicação de SNP + forchlorfenuron e 6-BA foi mais eficaz.

ABSTRACT: Plant growth regulators are an immense group of substances that have the ability to alter growth pattern of plants and can be used for improving plant growth and productivity. A study was conducted in the Xilin Gol grassland of Inner Mongolia, China, to ascertain the growth and biomass production of Stipa krylovii in response to exogenous application of different growth regulators at various concentrations viz. naphthalene acetic acid (NAA), 6-benzylaminopurine (6-BA), brassinosteroid (BR), sodium nitrophenolate (SNP) and forchlorfenuron, and gibberellic acid (GA3). Application of growth regulators significantly enhanced the growth and biomass production of S. krylovii. The height of vegetative shoot was enhanced mostly by the application of 100 mg L-1 GA3, while, height of reproductive shoot was increased by 25 mg L-1 6-BA, 100 mg L-1 SNP + 5 mg L-1 forchlorfenuron and 50 mg L-1 SNP + 2.5 mg L-1 forchlorfenuron as compared to control. Fresh biomass was enhanced by the application of 0.02 mg L-1 BR, 10 mg L-1 SNP + 0.5 mg L-1 forchlorfenuron and 50 mg L-1 SNP + 2.5 mg L-1 forchlorfenuron. Application of 5 mg L-1 6-BA and 50 mg L-1 SNP + 2.5 mg L-1 forchlorfenuron proved to be more beneficial in improving dry biomass of S. krylovii, as compared to control. In conclusion, exogenous application of different growth regulators improved growth and biomass production of S. krylovii. Furthermore, application of SNP + forchlorfenuron and 6-BA was more effective.

The nesting problem of irregular shapes within irregular areas has been studied from several approaches due to their application in different industries. The particular case of cutting leather involves several restrictions that add complexity to this problem, it is necessary to generate products that comply with the quality required by customers This paper presents a methodology for the accommodation of irregular shapes in an irregular area (leather) considering the constraints set by the footwear industry, and the results of this methodology when applied by a computer system. The scope of the system is to develop a working prototype that operates under the guidelines of a commercial production line of a sponsor company. Preliminary results got a reduction of 70% of processing time and improvement of 5% to 7% of the area usage when compared with manual accommodation.

El problema del acomodo de figuras irregulares dentro de áreas irregulares se ha estudiado desde varios enfoques debido a su aplicación en diferentes industrias. El caso particular del corte de cuero implica varias restricciones que hacen difícil la automatización de este problema, pues es necesario cumplirlas para poder generar productos con la calidad requerida por los clientes. El presente documento presenta una metodología para el acomodo de figuras irregulares en un área irregular (piel) considerando las restricciones establecidas por la industria del calzado, así como los resultados de dicha metodología al aplicarlos mediante un sistema de cómputo. El alcance del sistema es desarrollar un algoritmo que pueda integrarse en un prototipo funcional, que opere bajo los lineamientos de una línea de producción de una industria patrocinadora. Pruebas de laboratorio del sistema de cómputo arrojan reducciones del tiempo de 70% con respecto a sistemas comerciales y una mejora de 5 a 7% del área que puede lograr utilizar un operario.