SUMMARY: This study aimed to examine the differences in bone microarchitecture between different regions of the atlas in 28 dry atlas specimens using micro-CT, in order to explain the mechanism of the predilection sites of atlas fractures from the morphological point of view. A total of 28 dry specimens of intact adult atlas were randomly selected, scanned by micro-CT, and divided into a region from the anterior arch midpoint (AAM) to the lateral masses (LM), a LM region, and a region from the LM to the posterior arch midpoint (PAM). Trabecular thickness, separation, number, connectivity, and structure model index were measured for each of the three regions using the built-in software of the CT scanner. Trabecular thickness was all measured to be 0.11 ± 0.00 mm for AAM to LM, LM, and LM to PAM. Trabecular separation: AAM to LM > LM to PAM > LM. Trabecular number: LM > LM to PAM > AAM to LM. Connectivity: LM > LM to PAM > AAM to LM. Structure model index: LM > LM to PAM > AAM to LM. A lower trabecular number and connectivity and higher trabecular separation were seen in the anterior and posterior arches of the atlas, in which higher fracture rates were reported. By contrast, a higher trabecular number and connectivity and lower trabecular separation were seen in the lateral masses, in which lower fracture rates were reported.

RESUMEN: Este estudio tuvo como objetivo examinar las diferencias en la microarquitectura ósea entre diferentes regiones del atlas en 28 muestras de atlas secas utilizando micro-CT, con el fin de informar el área de mayor frecuencia en las fracturas de atlas, desde el punto de vista morfológico. Se seleccionaron al azar un total de 28 muestras secas de atlas adultos intactas las que se escanearon por micro-CT y se dividieron en una región desde el punto medio del arco anterior (MAA) hasta las masas laterales (ML), una región ML y una región desde el ML hasta el punto medio del arco posterior (MAP). Se midió el grosor trabecular, la separación, el número, la conectividad y el índice del modelo de estructura para cada una de las tres regiones utilizando el software incorporado del escáner CT. El grosor trabecular se midió en 0,11 ± 0,00 mm para MAA a ML, ML y ML a MAP. Separación trabecular: MAA a ML> ML a MAP> ML. Número trabecular: ML> ML a MAP> MAA a ML. Conectividad: ML> ML a MAP> MAA a ML. Índice del modelo de estructura: ML> ML a MAP> MAA a ML. Se observó un menor número de estructuras trabeculares y conectividad y una mayor separación trabecular en los arcos anterior y posterior del atlas, en los que se informaron tasas de fracturas más altas. Por el contrario, se observó un mayor número de estructuras trabeculares y conectividad, y una menor separación trabecular en las masas laterales, en las que se observó un número menor de fracturas.

SUMMARY: This study aimed to investigate the sagittal spinal-pelvic morphological changes, as well as the relationship between pelvic anatomical changes and the spinal-pelvic plane in patients with adolescent idiopathic scoliosis (AIS), in order to provide guidelines for orthopedic surgery in AIS. X-ray data were collected for retrospective analysis from 30 patients diagnosed as AIS in the Departments of Radiology at the Second Affiliated Hospital of Inner Mongolia Medical University and the Inner Mongolia International Mongolian Medical Hospital from April 2014 to November 2018, along with 30 normal adolescents as control. Pelvic parameters, including pelvic incidence (PI), pelvic tilt (PT), and sacral slope (SS), a spinal parameter, lumbar lordosis (LL), and anatomical parameters, including sacral width (SW) and femoral head- sacrum distance (FH-S), were measured. The spinal-pelvic parameters were compared between AIS patients and normal controls and also between male and female AIS patients. Pearson correlation was performed to analyze correlation between spinal-pelvic parameters and between spinal-pelvic parameters and anatomical parameters in both AIS patients and normal controls. PT was significantly lower in AIS patients than in normal controls (P < 0.05), whereas no significant difference was found in the other spinal-pelvic parameters, i. e. , LL, PI, and SS. There was a significant difference in PT between sexes in AIS patients. SS was significantly correlated with LL in EIA patients (P < 0.05, r > 0.5). SS was significantly correlated with LL and PI, and PT with LL, PI, and SS in normal controls (all P < 0.05), and there was no significant correlation between the other sagittal spinal-pelvic parameters (P > 0.05). FH-S was significantly correlated with LL, PI, SS, and PT in AIS patients (all P < 0.05). AIS affects some of the sagittal spinalpelvic parameters and anatomical parameters. In AIS, there is a significant correlation between the spinal-pelvic parameters, and the anatomical parameter is significantly correlated with multiple spinal-pelvic parameters.

RESUMEN: Este estudio tuvo como objetivo investigar los cambios morfológicos sagitales de la columna vertebral-pélvica, así como la relación entre los cambios anatómicos pélvicos y el plano espinal-pélvico en pacientes con escoliosis idiopática adolescente (EIA), con el fin de proporcionar pautas para la cirugía ortopédica en AIS. Se obtuvieron los datos de rayos X para el análisis retrospectivo de 30 pacientes diagnosticados como EIA en los Departamentos de Radiología del hospital Second Affiliated Hospital of Inner Mongolia Medical University y el hospital Inner Mongolia International Mongolian Medical Hospital, desde abril de 2014 hasta noviembre del 2018, junto con 30 adolescentes normales como control. Se midieron los parámetros pélvicos, que incluyeron incidencia pélvica (IP), inclinación pélvica (P) y pendiente sacra (PS), un parámetro espinal, lordosis lumbar (LL) y parámetros anatómicos, que incluyeron el ancho sacro (AS) y la distancia del sacro cabeza femoral (FH-S). Los parámetros espinalpélvicos se compararon entre los pacientes con EIA y los controles normales, como también entre pacientes con EIA masculinos y femeninos. La correlación de Pearson se realizó para analizar la correlación entre los parámetros espinal-pélvicos y entre los parámetros espinal-pélvicos y los parámetros anatómicos tanto en pacientes con EIA como en controles normales. PT fue significativamente menor en pacientes con EIA que en los controles normales (P <0,05), mientras que no se encontraron diferencias significativas en los otros parámetros espinal-pélvicos, i. mi. , LL, PI y SS. Hubo una diferencia significativa en PT en pacientes de ambos sexos con EIA. SS se correlacionó significativamente con LL en pacientes con EIA (P <0,05, r> 0,5). SS se correlacionó significativamente con LL y PI, y PT con LL, PI y SS en controles normales (todos P <0,05), y no hubo correlación significativa entre los otros parámetros sagitales de la columna vertebral-pélvica (P> 0,05) FH-S se correlacionó significativamente con LL, PI, SS y PT en pacientes con EIA (todos P <0,05). EIA afecta algunos de los parámetros sagitales de la columna vertebral-pélvica y los parámetros anatómicos. En EIA, existe una correlación significativa entre los parámetros espinal-pélvicos, y el parámetro anatómico se correlaciona significativamente con múltiples parámetros espinales-pélvicos.

SUMMARY: This study aimed to investigate the micro-anatomical morphology of ossicular chain in term fetus using micro-CT, in order to analyze the parameters of internal ossicular structure that may affect sound conduction.Four ossicular chains from two term fetuses were scanned by micro-CT. The related structural parameters of the trabeculae within the incus and malleus were calculated and compared. The fine anatomical structure of the auditory ossicles was analyzed.The microstructure of each auditory ossicles in term fetuses was clearly revealed by micro-CT. A marrow cavity was observed in the incus and malleus. In statistical analysis of the structural parameters of trabeculae in the incus and malleus, significant differences were found in BS/BV and Tb.Th (P < 0.05). Micro-CT enables the visualization of internal ossicular structure. The auditory ossicles in term fetus has good bone quality. The obtained bone structure data will help to clarify the physiological functions of normal fetal auditory ossicles.

RESUMEN: Este estudio tuvo como objetivo investigar la morfología microanatómica de la cadena osicular en el feto a término con micro-CT, con el fin de analizar los parámetros de la estructura osicular interna que pueden afectar la conducción del sonido. Cuatro cadenas osiculares de dos fetos a término fueron examinadas por micro-CT. Se calcularon y compararon los parámetros estructurales relacionados de las trabéculas dentro de los incus y malleus. Se analizó la estructura anatómica fina de los osículos. Se observó claramente la microestructura de cada osículo en los fetos y la cavidad medular en el incus y el malleus. En el análisis estadístico de los parámetros estructurales de las trabéculas en el incus y el malleus, se encontraron diferencias significativas en BS / BV y Tb.Th (P <0,05). Micro-CT permite la visualización de la estructura osicular interna. Los osículos en el feto a término tienen buena calidad ósea. Los datos obtenidos de la estructura ósea ayudarán para aclarar las funciones fisiológicas de los osículos auditivos fetales normales.

Abstract Total spikelet number per spike (TSS) is one of the key components of grain yield in wheat. Chromosome (chr.) 2D contains numerous genes that control TSS. In this study, we evaluated 138 F8 recombinant inbred lines (RILs) derived from an F2 population of a synthetic hexaploid wheat line (SHW-L1) and a common wheat cultivar (Chuanmai 32) for TSS in six different environments. To identify quantitative trait loci (QTL) for TSS, we constructed an integrated high-density genetic map of chr. 2D containing two simple sequence repeats, 35 diversity array technology markers, and 143 single nucleotide polymorphisms. We identified three stable QTL for TSS that individually explained 9.7–19.2% of the phenotypic variation and predicted 23 putative candidate genes within the QTL mapping interval. Overall, our results provide insight into the genetic basis of TSS in synthetic hexaploid wheat that may be useful in breeding high-yielding wheat cultivars.

Abstract Background: Drought is a major abiotic stress affecting global wheat (Triticum aestivum L.) production. Exploration of drought-tolerant genes is essential for the genetic improvement of drought tolerance in wheat. Previous studies have shown that some histone encoding genes are involved in plant drought tolerance. However, whether the H2B family genes are involved in drought stress response remains unclear. Methods: Here, we identified a wheat histone H2B family gene, TaH2B-7D, which was significantly up-regulated under drought stress conditions. Virus-induced gene silencing (VIGS) technology was used to further verify the function of TaH2B-7D in wheat drought tolerance. The phenotypic and physiological changes were examined in the TaH2B-7D knock-down plants. Results: In the TaH2B-7D knock-down plants, relative electrolyte leakage rate and malonaldehyde (MDA) content significantly increased, while relative water content (RWC) and proline content significantly decreased compared with those in the non-knocked-down plants under drought stress conditions. TaH2B-7D knock-down plants exhibited severe sagging, wilting and dwarf phenotypes under drought stress conditions, but not in the non-knocked-down plants, suggesting that the former were more sensitive to drought stress. Conclusion: These results indicate that TaH2B-7D potentially plays a vital role in conferring drought tolerance in wheat.

Abstract: Rolling shear properties of cross laminated timber are important mechanical properties for its structural application. To evaluate the influence of technical characteristics such as edge-gluing and gap size in the cross layers, on the measurement of rolling shear modulus and strength of cross laminated timber, three-layer spruce-pine-fire cross laminated timber shear block specimens with and without edge-gluing, with gaps of 2 mm, 4 mm and 6 mm, were tested by a modified planar shear test method. The mean values of rolling shear strength and modulus of No. 2 visual grade spruce-pine-fire cross laminated timber were 1,32 MPa and 111 MPa with coefficients of variance of 20% and 28%, respectively, regardless of technical characteristics. The characteristic rolling shear strength of all groups of three-layer cross laminated timber specimens was determined to be 0.88 MPa. The results indicated that the rolling shear strength and modulus values used in current design practice of spruce-pine-fire cross laminated timber were conservative. It was found that edge-gluing and gap size had a significant influence on measuring rolling shear strength rather than apparent rolling shear modulus by the modified planar shear test method. With the gap size larger than 2 mm, its influence on measuring rolling shear strength became negligible. The three major initial failure modes identified for the cross layer regardless of technical characteristics were rolling shear failure along the growth ring, tension perpendicular to grain failure in wood pith and tension perpendicular to grain failure along the wood ray.

Abstract Background: CircRNAs are widespread in plants and play important roles in response to abiotic stresses. Low nitrogen (LN) promotes the growth of plant root system, allowing it to explore more nitrogen. However, whether circRNAs involved in the response to LN stress and the regulation of LN-promoted root growth in wheat remains unclear. Methods: Two wheat varieties (LH9 and XN979) with contrasting root phenotypes to LN stress were used as materials to identify circRNAs under control and LN conditions by using high-throughput sequencing technology. Results: Six differentially expressed circRNAs (DECs) involved in the common response to LN stress and 23 DECs involved in the regulation of LN-promoted root growth were successfully identified. GO analysis of the DEC-host genes involved in the regulation of LN-promoted root growth showed that GO terms related to biological regulation, responses to stimuli and signalling were significantly enriched. Moreover, seven DECs were predicted to have miRNA binding sites and may serve as miRNA sponges to capture miRNAs from their target genes. Conclusions: LN stress altered the expression profiles of circRNAs in wheat. This is the first report of LN stress responsive circRNAs in plants. Our results provided new clues for investigating the functions of circRNAs in response to LN stress and in the regulation of LN-promoted wheat root growth.