ABSTRACT A mechanism to convert Fe(III) to Fe(II) by a reduction process could be a solution to the problem of selective separation of metals in extraction processes by using the ion-exchange process. The aim of this research was to reduce Fe(III) to Fe(II) present in leachate from nickel mining waste. Reducing agents used were sodium dithionite and sodium metabisulfite. The potential was decreased in order to quantify the minimum reducing agent that was necessary for conversion. Reaction time, pH, stirring speed and temperature were also studied. Results indicated dithionite was a better reducing agent than metabisulfite and complete conversion was possible by reducing the potential to 590mV at pH 0.5-2 and 240mV at pH 2.5. Stirring speed had no influence on the reduction process at 2 hours; however, conversion decreased after 24 hours, perhaps due to oxygen present in air. The analyses were conducted by ion chromatography and voltammetry.

Abstract This work aims to verify the possibility of using depleted batteries as a source of manganese dioxide applying the electrolytic process. An electrolyte solution containing the following metal ions was used: Ca (270 mgL-1), Ni (3.000 mgL-1), Co (630 mgL-1), Mn (115.3 mgL-1), Ti (400 mgL-1) and Pb (20 mgL-1). The production of electrolytic manganese dioxide (EMD) was performed through electrolysis at 98 °C (± 2 °C) applying different current densities (ranging from 0.61 A.dm-2 to 2.51 A.dm-2). The materials obtained were analyzed through X-ray fluorescence spectrometry, X-ray diffraction, specific surface area (BET) and scanning electron microscopy (SEM). The best results regarding the current efficiency, purity grade and specific surface area were obtained with a current density ranging between 1.02 A.dm-2 and 1.39 A.dm-2. The allotropic εMnO2 variety was found in all tests.

Abstract Membrane separation techniques have been explored for treating industrial effluents to allow water reuse and component recovery. In an electrodialysis system, concentration polarization causes undesirable alterations in the ionic transportation mechanism. The graphic construction of the current voltage curve is proposed for establishing the value of the limiting current density applied to the cell. The aim of this work was to determine the limiting current density in an electrodialysis bench stack, the function of which was the treatment of an electroplating effluent containing HEDP. For this, a system with five compartments was used with a working solution simulating the rinse waters of HEDP-based baths. The results demonstrated correlation between the regions defined by theory and the experimental data.

Este trabalho visou o estudo da produção de lã de rocha utilizando escória da produção de ligas de ferro silício manganês. O resíduo em questão possui características químicas que indicam a possibilidade de adição deste resíduo em formulações de lãs minerais. Procedeu-se a fusão da escória em um forno elétrico a arco, em escala de laboratório. A escória foi fundida e vazada na temperatura de 1450 ºC em um recipiente com água, visando um resfriamento brusco e com isso uma aproximação do método de produção das lãs de rocha. Amostras da lã de rocha produzida foram caracterizadas por técnicas de análise química, difração de raios X, microscopia eletrônica de varredura e análise térmica diferencial sendo que, os resultados obtidos foram comparados aos valores encontrados na literatura. Os resultados encontrados mostram que a reciclagem dos resíduos para a produção de lãs de rocha é promissora, pois o reaproveitamento da escória de ferro silício manganês permite a transformação destes resíduos em subprodutos através da incorporação dos resíduos na produção de lã de rocha, que possui amplo mercado como isolante térmico, acústico e inibidor de propagação de chamas.

This study aimed to investigate the production of rock wool using slag from the production of ferrosilicon manganese alloys. The waste in question has chemical characteristics that indicate the possibility of adding this in formulations of mineral wool. There has been melting the slag in an electric arc furnace in laboratory scale. The slag was melted and poured at a temperature of 1450 ºC in a container with water, aiming at a rapid cooling and thus an approximation of the method of production of rock wool. Samples of rock wool produced were characterized by techniques of chemical analysis, X-ray diffraction, scanning electron microscopy and differential thermal analysis is that the results were compared to those found in the literature. The results show that the recycling of waste for the production of rock wool is promising, for the reuse of slag from ferrosilicon manganese allows the conversion of waste products through the incorporation of waste in the production of rock wool, which has broad market as insulation thermal, acoustic and inhibiting the spread of flames.

Este artigo apresenta as análises das propriedades mecânicas e de durabilidade de concreto com agregados reciclados (CAR) para em concreto. Sabe-se que a porosidade dos agregados reciclados influencia as propriedades frescas e endurecidas do concreto e estas propriedades estão relacionadas com a massa específica dos agregados graúdo reciclado, que diretamente influencia as propriedades mecânica do concreto. Os resíduos de construção e demolição (RCD), que deram origem aos agregados reciclados, foram separados em agregado miúdo e agregado graúdo. Também, um agregado graúdo reciclado de maior densidade foi obtido misturando o agregado reciclado do RCD com o agregado reciclado de resíduo de concreto (RC). Os concretos com agregados reciclados foram produzidos com três níveis de relação a/c, as razões foram usadas de acordo com a NBR 6118 para concretos estruturais, combinando-se cada agregado graúdo reciclado com o agregado miúdo reciclado e com uma areia natural. Concretos de referência também foram produzidos utilizando-se agregados naturais. Observou-se que CAR tem potencial para aplicação como concretos estruturais. Em termos gerais, o uso combinado dos agregados graúdos e miúdos reciclados não foi vantajoso, mas as propriedades dos CAR eram tanto melhores quanto maior a massa específica dos agregados graúdos reciclados. Alguns CAR chegaram a apresentar resistências mecânicas maiores que as de seus respectivos concretos de referência.

This paper presents the analysis of the mechanical and durable properties of recycled aggregate concrete (RAC) for using in concrete. The porosity of recycled coarse aggregates is known to influence the fresh and hardened concrete properties and these properties are related to the specific mass of the recycled coarse aggregates, which directly influences the mechanical properties of the concrete. The recycled aggregates were obtained from construction and demolition wastes (CDW), which were divided into recycled sand (fine) and coarse aggregates. Besides this, a recycled coarse aggregate of a specific mass with a greater density was obtained by mixing the recycled aggregates of the CDW with the recycled aggregates of concrete wastes (CW). The concrete was produced in laboratory by combining three water-cement ratios, the ratios were used in agreement with NBR 6118 for structural concretes, with each recycled coarse aggregates and recycled sand or river sand, and the reference concrete was produced with natural aggregates. It was observed that recycled aggregates can be used in concrete with properties for structural concrete. In general, the use of recycled coarse aggregate in combination with recycled sand did not provide good results; but when the less porous was used, or the recycled coarse aggregate of a specific mass with a greater density, the properties of the concrete showed better results. Some RAC reached bigger strengths than the reference concrete.

Esta pesquisa teve como objetivo avaliar a lignificação em caules jovens de plantas de Lophanthera lactescens Ducke crescidas in vitro. L. lactescens (Malpighiaceae) é uma espécie endêmica da Amazônia Brasileira que, além de propriedades medicinais, apresenta potencial para a indústria de produtos florestais. As plantas foram crescidas in vitro, usando-se meio nutritivo MS. As análises foram realizadas por microespectrometria no infravermelho, no modo reflectância difusa. Microscopia com fluorescência e testes histoquímicos de Wiesner e Maüle foram realizados para o acompanhamento do processo de lignificação. Os espectros registrados a partir da microscopia no infravermelho mostraram sinais em 1336 e 1246 cm-1, característicos de ligninas siringílica e guaiacílica. Indivíduos que apresentaram entorses no caule, em decorrência do acentuado desenvolvimento, produziram fibras gelatinosas, com a camada de celulose evidente. A microscopia com fluorescência evidenciou deposição de lignina inicialmente nos ângulos das células, com depósito progressivo ocorrendo na parede secundária dos elementos traqueais do caule.

This aim of this study was to evaluate the lignification in young stems of the Lophanthera lactescens Ducke plant grown in vitro L. lactescens (Malpighiaceae), a species endemic in the Brazilian Amazon that possesses both medicinal properties and could be used in the forest product industry. Plants grown in vitro condition in MS medium were analyzed using Infrared (IR) microspectroscopy in a diffuse reflectance mode, fluorescence microscopy. Moreover, histochemical tests such as the Wiesner and Maüle test were run to monitor the process of lignification in cell walls. The spectra of IR microscopy recorded using cross section tissue are representative of guaiacyl/syringyl lignin, based on the 1336 and 1246 cm-1 signal. Individuals presenting stem sprains, resulting from the marked development, produced gelatinous fibers with a clear cellulose layer. Initially, fluorescence microscopy demonstrated lignin deposition in the cell corner region having progressive deposition in the secondary wall of tracheary elements of the stem.