Spent Foundry Sand is one of the largest industrial solid wastes generated by foundries in the production of iron and steel components. Currently, millions of tons of molten sands are discarded worldwide. Therefore, this work aims to reuse the Spent Foundry Sand for the production of glass-ceramic materials, since this reuse minimizes the environmental impacts related to its discarding. The Spent Foundry Sand, composed of >60% SiO2, was mixed with limestone and melted at 1500 °C to produce the glass (melting and rapid cooling method). The materials were characterized by X-Ray Fluorescence, X-Ray Diffraction and thermal analysis. The X-Ray Diffraction results of the glass tablets treated at 875, 941 and 1050 °C show that the formed phases are Wollastonite-1A, β-Wollastonite and Akermanite. In summary, it is possible to produce glass-ceramic from Spent Foundry Sand with Wollastonite phase. components Currently worldwide Therefore glassceramic ceramic discarding 60 >60 SiO2 SiO 150 C melting method. method . method) XRay X Ray Fluorescence analysis 875 94 105 Wollastonite1A, Wollastonite1A WollastoniteA 1A, 1A A Wollastonite-1A βWollastonite β Akermanite summary phase 6 >6 15 87 9 10 > 1 8

ABSTRACT Manganese oxides were synthesized during 40 min at 140 ºC via Microwave-Assisted Hydrothermal (MAH) method and treated at different temperatures in order to evaluate the phase evolution using structure refinement (Rietveld method). The samples obtained were heat treated at temperatures defined by means of thermal analysis (160 ºC, 480 ºC, 715 ºC, 870 ºC, 920 ºC and 1150 ºC) and analyzed by X-Ray Diffractometry (XRD), X-Ray Fluorescence (XRF), Fourier Transform Infrared (FTIR) spectroscopy, Raman scattering, UV-Vis absorption and Scanning Electron Microscopy (SEM). Structural characterizations allowed to identify five distinct phases: α-MnO2, Mn3O4, Mn5O8, Na2Mn5O10 and Na4Mn9O18 with weight percentages dependent on the heat treatment. The hausmannite structure (average crystallite size ranging from 28.9 nm to 99.1 nm) is present in all samples and go through various oxidation and reduction processes from 160 ºC to 1150 ºC without any major variation in the lattice parameters. Chemical characterizations identifies the presence of Na+ ions in all samples, either as substitution defects or as components of specific crystalline structures (Na2Mn5O10 and Na4Mn9O18), showing that the synthesized manganese oxides works as Na+ intercalation compounds, important materials for energy storage devices optimization. The results presented enables a better interpretation of the thermal and structural characteristics of manganese oxides synthesized via MAH.

Glass-ceramic materials were obtained by heat treatment (960 ºC for 2, 4, and 6 hs) of glasses with CaCO3 47.50 wt%-TiO2 23.75 wt%-SiO2 23.75-Al2O3 5.00 wt% formulation produced by the melt-quenching technique (melting at 1650 ºC and subsequent annealing at 650 ºC). The materials’ structural characterization and crystallization kinetics (Kissinger method) indicate the presence of CaTiO3, CaSiO3, and CaTiSiO5 crystalline phases with activation energies 217, 281, and 446 kJ/mol, respectively. The structure refinement (Rietveld method) suggests metastability for the CaSiO3 and CaTiSiO5 phases as a function of the heat treatment time. The increase in time favors CaTiO3 crystallization, from 62.97 wt%, in the 2 hs treated sample, to 79.21 wt%, in the 6 hs treated sample. EDS and microstructure analyses confirm the glass-ceramic production and indicate segregation of the CaTiO3 phase for longer heat treatment times.

Abstract Macusanite is a volcanic glass extracted from the volcanic field Macusani – Peru, formed by the fast cooling of magma. This study shows physical and chemical characterization of Macusanite samples to better understand its molecular structure, elemental composition as well as to investigate the presence of natural inclusions. The characterization of the natural glass can give valuable geological information about the magma composition, the eruption intensity and age of volcanism activity. Moreover, the use of different characterization techniques can help in mineral prospecting. Macusanite was characterized by X-Ray Diffraction/Fluorescence (XRD/XRF), Optical Microscopy, Scanning Electron Microscopy (SEM) and micro-Raman spectroscopy. The latter suggests the presence of andalusite mineral incorporated in the glass structure, while the Energy-Dispersive X-ray Spectroscopy (EDS) analysis indicates the presence of some rich calcium inclusion. Moreover, XRD shows the glass characteristic amorphous band and that the sample is in the glassy stage.

RESUMO As blendas poliméricas obtidas com resíduos que antes eram chamados de lixos vêm crescendo como uma solução viável, permitindo melhorias nas propriedades mecânicas e como alternativas sustentáveis. Este trabalho relata os efeitos de misturas de polietileno de baixa densidade (PEBD) e borracha natural(NR), com cinzas de bagaço de cana-de-açúcar (CBCA) como carga, com e sem polietileno-enxertado com anidrido maleico (PE-g-MA) como agente de ligação. Os comportamentos dinâmico-mecânico e a análise de tensão-deformação foram estudados. Os materiais foram avaliados por calorimetria diferencial de varredura e observações morfológicas. Os resultados mostraram que a incorporação do PE-g-MA reduziu a deformação e melhorou o estresse e o módulo Young das misturas. Além disso, a presença de SCBA aumentou a dureza, mantendo a resistência à tração e o comportamento de alongamento do polímero. Os resultados demonstram o potencial uso da CBCA na mistura de elastômeros e termoplásticos, livres de agentes de vulcanização.

ABSTRACT The polymer blends obtained with residues that before were called wastes has been growing as a viable solution, allowing improvements in the mechanical properties and as sustainable alternative. This work reports the effects of blends of low-density polyethylene (LDPE) and natural rubber (NR), with sugar cane bagasse ash (SCBA) as filler, with and without polyethylene-graft-maleic anhydride (PE-g-MA) how coupling agent. The dynamic mechanical behavior and a stress-strain analysis were studied. The materials were further evaluated by differential scanning calorimetry and morphological observations. The results showed that incorporation of the PE-g-MA reduced the strain and improved the stress and the Young module of the mixtures. Moreover, the presence of SCBA increased the hardness while maintaining the tensile strength and the elongation behavior of the polymer. The results demonstrate the potential use of SCBA in the elastomer and thermoplastic mixture, free of vulcanization agents.

The supramolecular structure of organic thin films is a key factor in their optical and electrical properties and, consequently, in the technological applications involving organic electronic. Here, thin films of a perylene derivative, the bis butylimido perylene (BuPTCD), were produced by vacuum thermal evaporation (PVD, physical vapor deposition). The main objective is to investigate the supramolecular structure of the BuPTCD in these PVD films, which implies to control their thickness at nanometer scale and to determine their molecular organization, morphology at micro and nanometer scales and crystallinity. The ultraviolet-visible absorption reveals a uniform growth of the PVD films. The optical and atomic force microscopy images show a homogeneous surface of the film at micro and nanometer scales, respectively. The X-ray diffraction indicates that both powder and PVD film are in the crystalline form. Complementary, a preferential head-on orientation of the molecules in the PVD films is determined via infrared absorption spectroscopy. Besides, the annealing process (200oC) did not affect the molecular organization of the PVD films, revealing a thermal stability of the BuPTCD molecules within the PVD films. Through DC electrical measurements, an electrical conductivity of 7.45x10-10 S/m was determined for BuPTCD PVD films onto Au interdigitated electrodes (IDE-structured devices), which can be enhanced, under illumination, by two orders of magnitude (photoconductivity effect). As proof-of-concept, the IDE-structured devices are tested as gas sensor for trifluoroacetic acid.

Waste recycling has been the subject of numerous scientific researches regarding the environmental care. This paper reports the redirecting of sugarcane bagasse ash (SBA) as new filler to natural rubber (NR/SBA). The NR/SBA composites were prepared using an opened cylinder mixer to incorporate the vulcanization agents and different proportions of residue (SBA). The ash contains about 70-90% of inorganic compounds, with silica (SiO2) being the main compound. The SBA incorporation improved the mechanical properties of the vulcanized rubber. Based on these results, a new use is proposed for the agro-industry organic waste to be implemented in the rubber vulcanization process, aimed at improving the rubber physical properties as well as decreasing the prices of natural rubber composites.