This paper reports a method for simultaneous determination of H2, O2, N2, CO, CO2, CH4, C2H2, C2H4, C2H6, C3H4 (propadiene and propyne), C3H6, C3H8 and C4H10 (n-butane and isobutane) by gas chromatography using thermal conductivity and flame ionization detectors. A single porous layer open tubular column (0.53 mm internal diameter ? 30 m length ? 30 µm thick) was applied and no catalytic converter was needed to convert CO and CO2 into CH4 to enable identification by a flame ionization detector. The most appropriate chromatographic conditions were defined for the method and it was validated according to the recommendations of the National Health Surveillance Agency and the National Institute of Metrology, Standardization and Industrial Quality. Chromatographic conditions defined for the target gases presented satisfactory linearity (r > 0.99), and limits of detection ranged between 0.0916 and 2.75 ppm. High accuracy (98-101%) obtained for the gas chromatography/thermal conductivity detector/flame ionization detector method associated to low relative standard deviation (?λτ; 2%) confirmed its applicability in routine quantification of target gases formed during the pyrolysis of municipal refuse-derived fuel.

This study reports a protocol for the treatment of a sanitary landfill leachate through integration between a stage of coagulation-flocculation, a step of filtration of the resulting suspension, and application of the photo-Fenton process using a ferrioxalate complex and solar irradiation. The best results for turbidity removal by coagulation-flocculation were reached using Al3+ as nitrate salt mainly using concentrations up close 4.4 mmol L-1, at the natural pH of the effluent (pH 7.9), when the removal of 66% of the turbidity was achieved. By using a ferrioxalate complex after adjusting the pH of the effluent to 5, it was possible to circumvent the classical limitations of the Fenton process (related to the pH of the medium limited to between 2.5 and 3.0), performing a removal of 68% of the remaining dissolved organic carbon. The global dissolved organic carbon removal in this process was of 86% after a membrane filtration step before the photo-Fenton process.

A oxidação de uma série de 1,2-diidronaftalenos, substituídos no anel aromático, foi investigada com trinitrato de tálio (TTN) em metanol ou em trimetilortoformiato (TMOF) como solvente. Em todos os casos, indanos foram formados, embora o rendimento tenha variado de excelente a baixo, dependendo da estrutura do substrato. A presença de um grupo doador de elétrons no substrato favorece o rearranjo, enquanto que uma quantidade significativa de derivados glicólicos, bem como naftalenos, foi obtida na oxidação de 1,2-diidronaftalenos com um grupo retirador de elétrons, tais como Br e NO2. Mecanismos para a formação de cada um destes produtos foram propostos.

The oxidation of a series of 1,2-dihydronaphthalenes substituted in the aromatic ring was investigated with thallium trinitrate (TTN) in methanol or in trimethylorthoformate (TMOF) as solvent. In all cases, indans are produced, although the yield varied from excellent to poor, depending on the structure of the substrate. The presence of an electron-donating group in the substrate favors the rearrangement, whereas significant amounts of glycolic derivatives, as well as naphthalenes, were obtained in the oxidation of 1,2-dihydronaphthalenes bearing electron-withdrawing groups, such as Br and NO2. Mechanisms for the formation of each of these products are proposed.