Abstract The aim of the present study was to evaluate the physical and chemical quality of the brown soybean preserve in function of the ascorbic acid concentration and the maceration time, and also to evaluate the chemical composition, microbiological hazard, and acceptability of the best preserve, in addition verify its technological, nutritional, functional and sensory viability. The hardness of the grain ranged between 8.6 and 23N and was significantly affected by the maceration time. The ascorbic acid concentration influenced antioxidant activity (ranged between 4.3 and 183.8 mg100g-1) and total phenolic compounds (ranged between 176.4 and 466.2 mg100g-1). The best brown soybean preserve was obtained with a maceration time of 23 min and an ascorbic acid concentration of 0.15 g100g-1 . This shows high nutritional value and essential amino acid content, absence of trypsin inhibitor and microbiological risk, and also sensory acceptance. Therefore, the brown soybean preserve is viable, and its consumption is recommended.

Abstract The objective of this study was to characterize the structural and physicochemical properties, the bioactive compounds and the antioxidant activity of freeze-dried açaí pulp (FDAP). The morphology of freeze-dried açaí pulp showed a continuous matrix with a spongey aspect, and the X-ray diffractometry indicated that 96.17% of the molecular structure was in the amorphous state and 3.82% in the crystalline state. Freeze-dried açaí pulp presented an interesting chemical composition of macronutrients, which constituted mainly of lipids (49.14 g/100 g d.b.), proteins (9.19 g/100 g d.b.), total crude fiber (20.29 g/100 g d.b.) and total sugars (2.71 g/100 g d.b.). It also showed great amount of total phenolic compounds (1405.03 mg gallic acid/100 g d.b.) and anthocyanins (127 mg cyanidine-3-glucoside/100 g d.b.), allowing for functional properties allegations. There was significant increase in the water absorption and water solubility indices when the freeze-dried açaí pulp was submitted to a gradual increase in temperature, properties that are adequate for industrial use. Thus, the consumption of freeze-dried açaí pulp should be encouraged and also its use by the food industry in order to develop new food products.

Abstract The aim of this research was compare methods for pigments extraction and color determination in different tomato for processing cultivars, and choose the most promising materials for the industry. The tomatoes for processing studied were of the IT761, H9992, H9553, AP533, Advance, N901, BRSena, U2006, HY26, HY37 and HY68 cultivars. The extraction yields of lycopene and β-carotene using acetone and the mixture of ethanol, acetone and hexane (10:10:20) were determined, and the parameters of color were determined by colorimetric and digitals image methods (Cielab and Hunterlab), besides other physicochemical characteristics. The mixture of solvents is more efficient in the extraction of lycopene and β-carotene than acetone on its own. The methods of assessing the color through image presented higher levels of luminosity and chrome a* and b* than the instrumental method, given that the Hunterlab is closer to the colorimeter method, than Cielab. The analysis through digital images indicates that the procedure is promising, and it can be used as a instrument for analysing tomato colors. Considering that the level of TSS is fundamental to industrial performance, the IT761, BRSena, AP543, and H9992 cultivars stand out, moreover these cultivars have higher levels of lycopene and darker red color.

Abstract The effect of the anatomical structure of tomato skin may be significant for quality determination at the harvest point, but the definitions of cells that constitute the skin of fleshy fruits, such as tomato, are still unclear, providing contradictory descriptions. The aim of this study was to evaluate the epidermal tissue of different genetic materials of tomato processing (IT761, U2006, TC2736, CVR2909 and F3060) and maturation stage, in order to compare and choose genetic materials with morphological characteristics of the epidermis region more appropriate for the bulk transport. Micrographs were used for cell measurements using the Image J software. Cuticle undergoes thickening during fruit growth, and reduction in full maturation. Genetic materials presenting fruits with thicker cuticle at the harvest stage (CVR2909, F3060 and IT761) were more advantageous due to their mechanical resistance. Cuticle deposition ends before full fruit maturation, resulting in a decrease in the amount of cutin per surface unit, consequently decreasing cuticle thickness in the ripe fruit. The characteristics observed in the tomato fruit mesocarp clearly showed the disruption of the cell wall during the fourth maturation stage related to loss of fruit firmness. Among the new genetic materials, F3060 has a greater potential to become cultivated for industrialization due to its morphological characteristics, such as elevated cuticle thickness and high values for width, height, perimeter and area of epidermal cells in full maturation stage, which make it suitable for bulk transport.

RESUMO Pão de queijo (PQ) é um produto sem glúten, produzido a partir de amido de mandioca azedo. Apresenta casca crocante e miolo macio, lembrando uma estrutura extrudada. O amido de milho ceroso (AMC) é conhecido pela sua qualidade tecnológica e não foram encontrados estudos para sua aplicação na produção de PQ. Neste sentido o presente trabalho objetivou investigar o uso de AMC e de AMC fermentado, utilizando polvilho azedo de mandioca como inóculo, e seco ao sol (AMCF) na substituição do amido convencional (0, 25, 75, e 100%) e seus efeitos no desenvolvimento da massa, cor e propriedades de textura. Os dados foram analisados por ANOVA e teste de Tukey (p≤0.05%) e os resultados foram comparados com um produto comercial A melhor formulação foi caracterizada quanto sua composição proximal, aceitação sensorial e pela intenção de compra e os dados são apresentados pelas suas médias e desvio-padrão. Os parâmetros que diferiram estatisticamente foram as coordenadas de cor para o vermelho, capacidade de expansão, volume específico. Com 100% de AMCF a melhor formulação foi microbiologicamente segura. A composição proximal apresentou valores menores quando comparados com os valores da Tabela Brasileira de Composição de Alimentos. O produto pode ser considerado com boa aceitação, já que apresentou notas maiores que 7,79 para textura, aparência, sabor e intenção de compra. O AMCF pode ser considerado como um bom substituto para o polvilho azedo de mandioca.

ABSTRACT Brazilian cheese bread (CB) rolls are gluten-free bread made from sour cassava starch. They are soft in the center and have crispy crust, reminding of the extruded structure. Although native waxy maize starch (WMS) has higher technologic quality, it has not been used in CB rolls; therefore, this study aimed to investigate the use of WMS and the backslopping fermentation process plus sun drying in WMS to replace sour cassava starch (0, 25%, 75%, and 100%) and the effects on dough development, color, and textural properties. Data were analyzed using variance and Tukey test (p ≤ 0.05%), and the results were set against a commercial product from cassava starch. The better formulation was characterized by proximal composition, sensorial acceptance, and willingness to buy, and data were presented as means and standard deviation. The different statistic parameters included color to redness coordinate, baking expansion capacity, specific volume, hardness, fracturability, and chewiness. The best formulation had 100% of sundried WMS and was microbiologically safe. The proximal composition had lower values than that obtained from the Brazilian Food Database. The product was considered satisfactory as it had a score of more than 7.79 to texture, appearance, and flavor with higher willingness to buy (92.5%). The backslopping fermentation plus SWMS was considered a potential replacement for sour cassava starch.

Abstract The aim of this work was to evaluate the microbiological and physicochemical qualities of sour cassava starch and cassava bagasse produced during cassava agroindustry in order to evaluate their potential for use in food. All samples were kindly provided by family farmers producers from the region of Cará, in town of Bela Vista de Goiás, Brazil. All of sour cassava starch samples showed microbial counts within the values established by the current legislation. Drying process of raw cassava bagasse to produce the bran was sufficient to reduce the mold and yeast counts (from 1.9x103 to 3.5x101 CFU g -1) and of total coliform counts (from 2.1x103 to 2.4x102 MPN 100 mL-1), and also eliminated the contamination by coliforms at 45 ° C and Bacillus cereus. Carbohydrate contents of all sour cassava starch samples ranged from 99.64 to 99.75 g 100g-1. These results indicated that the sour cassava starch presented high degree of purity, and extraction process was efficient. Bran sample showed high carbohydrate (96.94 g 100g-1) and dietary fiber (22.58 g 100g-1) contents. High dietary fiber content suggests the use of bran as raw material to increase the availability of fiber in food products, increasing its nutritional quality.

Abstract In order to help the choice and recommendation of cultivars with the greater mechanical resistance of fruits, this research aimed to determine the mechanical resistance and biometric and physicochemical characteristics of tomato cultivars for industrial processing. Eleven processing tomato cultivar fruits cultivar were used (IT761, H9992, H9553, AP533, Advance, N901, BR-Sena, U2006, HY26, HY37 and HY68). Tomatoes firmness was influenced by several factors, including thickness, epidermal cell shape, and internal structures. In general terms, fruits more resistant to compression and puncture presented low longitudinal diameter (55-59 mm), cross-sectional diameter (42-45 mm), scar diameter (5.8-6.6 mm), pericarp thickness (5.9-7.7 mm), fresh weight (56 - 70 g), volume (61-77 cm3) and ash (0.34-0.40 g 100 g-1), and high moisture content (96.2-96.6 g 100 g-1), and pectin content (0.39-0.47 mg 100 g-1). The fruits showing a better mechanical resistance come from AP533, IT761, HY37 and H9992 cultivars, which should be recommended for cultivation in order to reduce losses during harvest, bulk handling and transportation.

Abstract Food-type soybean, considered a functional and nutritious food, becomes an new alternative food in human nutrition, and its preserve is an option to the consumer market. The present study aims to verify the effect of maceration time of the grains and the acetic acid concentration in brine on the physical and chemical characteristics of a edible soybean preserves, and to evaluate the proximal composition, microbiological risk and sensory acceptance of the selected preserve. The methodology used was the response surface and the central composite rotational design. The presence of acetic acid in the brine was prejudicial to the quality of the edible soybean preserve - BRSMG 790A cultivar. The soybean preserve with the best characteristics was obtained with a maceration time of 100 minutes and without the addition of acetic acid. The product was microbiological safe, showed sensory acceptance and high nutritional value (15.5 g 100 g-1 of protein and 7.0 g 100 g-1 of lipid), free of trypsin inhibitor. The essential amino acids represented 17.2% of those in the dry grain, more than 50% the standard values proposed for the essential amino acids for children and adults. The selected preserve maintained 31.25% of the antioxidant activity of the grains and could be used as a viable technological option.

Abstract The market for ready-to-drink fruit nectars is one of the fastest growing ones, because fruits provide beneficial effects for health maintenance and disease prevention, mainly due to the presence of phenolic compounds and their antioxidant activity. Amongst these, jambolan stands out, but is still little explored. The objective of the present work was to evaluate the influence of different proportions of jambolan pulp, sucrose and water on the physicochemical characteristics and sensory acceptance of jambolan nectars, besides determining the content of some bioactive compounds and the antioxidant capacity of the selected nectar, with a view to adding value to the fruit. Six jambolan nectar formulations were established using a Simplex design. The ingredients significantly affected the Chroma (9.33-11.05), Hue angle (359.36-359.48), apparent viscosity (6.9-64.8 cP) and pH (3.84-3.93) of the jambolan nectars. The formulation with 55 g of jambolan pulp, 5 g of sucrose and 40 g of water per 100 g of nectar presented higher levels of anthocyanins when compared to tropical acai juice and camu-camu nectar. It is feasible to produce jambolan nectar with desirable physicochemical and sensory characteristics, rich in bioactive compounds, thus increasing the possibilities of applying this fruit as an ingredient in the food industry.

Abstract The aim of this study was to characterize the corn gluten feed and corn gluten meal originated from waxy maize wet milling industry, in relation to its microbiological risk and physical, chemical and functional properties. The wet residues showed microbiological standards for human consumption. Maize gluten meal was characterized by having high protein content (32 g 100 g-1), lipids (16 g 100 g-1) and carbohydrates (45 g 100 g -1), whereas the maize gluten feed contains high content of dietary fiber (44 g 100 g -1). The maize gluten feed and maize gluten meal have high potential for application as food ingredient. The high dietary fiber, suggests its use as a promising ingredient to increase the availability of fibers, thereby increasing attractiveness and nutritional quality of food. Furthermore, the use of this coproduct of waxy starch may be an alternative to traditional fibers used in the production of bakery products already before with claimed functional and health properties.

Abstract The aim of this study was to determine the physical and chemical characteristics of ten processing tomatoes cultivars (H9992, H9553, U2006, N901, E8755, BA5445, F170, HMX, AP533 and CVR) produced in the city of Morrinhos, Goiás State, Brazil, in order to assess the fruit quality and contribute with more subsidies for choosing tomato cultivars for processing by industries. H9992, H9553, N901, BA5445 and HMX genotypes have smaller fruits (length, volume and mass) and higher mechanical resistance of the fruit pulp. H9992, HMX and F170 genotypes also have higher resistance of fruit peel, indicating that these materials are less susceptible to losses during mechanical harvesting and transportation to the industry. Regarding the L* and b* parameters, the less yellow and darker H9992, H9553 and U2006 cultivars are the most recommended for the industry, which seeks genotypes with higher concentrations of lycopene and less carotenes. Processing tomatoes cultivar HMX, H9992, H9553 and U2006 have higher soluble solids, and potential to enable greater industrial efficiency. Therefore, cultivars H9992 and HMX standing out positively in most of the evaluated parameters: have smaller fruits (length, volume and mass), higher mechanical resistance of the fruit pulp, greater resistance of the fruit peel, higher soluble solids content. Therefore, new genetic material that presented better characteristics for industrialization is HMX.

RESUMO: Este estudo objetivou avaliar o efeito do tempo de torra no micro-ondas para diferentes tamanhos de grãos de soja tipo alimento de tegumento preto, de forma a atingir a melhor crocância, sabor e dureza, e em seguida caracterizar o seu confeito, estruturado na forma de núcleo e camadas de cobertura de chocolate (drageados), em relação ao valor nutricional, risco microbiológico, aceitabilidade e intenção de compra pelos consumidores. O sabor e a crocância da soja preta torrada foram afetados somente pelo tempo de torra em micro-ondas, enquanto a dureza somente foi afetada pela dimensão dos grãos. O melhor núcleo (selecionado) foi obtido com os grãos de peneira 15 (grãos grandes), no tempo de 11 min de torra em micro-ondas, pois apresentou maior frequência para as notas de extremamente crocante (56%), sabor de torrado (61%), e uma dureza instrumental próxima ao produto comercial (33,17 N). As drágeas não apresentaram amido resistente, antocianinas e risco microbiológico, e foram sensorialmente aceitas pelos provadores (scores médios de 7,77 para textura e 8,36 para aparência, em uma escala de 1 a 9). Portanto, o drageado de soja preta torrada com chocolate é viável do ponto de vista tecnológico, nutricional e sensorial, com alto potencial de comercialização.

ABSTRACT: This study aimed to evaluate the effect of different microwave-roasting timeson different sizes of soybean grains with black tegument to achieve the best crunchiness, flavor, and hardness. Black soybean dragées- containing a soybean core coated with layers of chocolate (dragée) - were manufactured, and their nutritional value, microbiological risk, acceptability, and consumer-purchase intentions were verified. Flavor and crunchiness of the roasted black soybeans wereonly affected by the roasting time in the microwave, whereas the hardness was only affected by grain size. The best core of the dragéewas obtainedusing grains ofsieve size 15 (large grains) roastedin the microwave for 11 min; this core presented higher frequencies for extremely crunchy notes (56%), toasted flavor (61%), and an instrumental hardness close to that of the existing commercial product (33.17 N). The manufactured dragées did not present resistant starch, anthocyanins, and microbiological risk, and they were sensorially accepted by the tasters (mean scores of 7.77 for texture and 8.36 for appearance on a scale of 1 to 9). Thus, roasted black soybean dragéeshave a high marketing potential from technological, nutritional, and sensorial points of view.

RESUMO: A araruta é uma planta que apresenta conteúdo abundante de amido, e por não apresentar as proteínas do glúten em sua composição desperta o interesse da sua utilização na produção de alimentos para pessoas intolerantes a essas proteínas. A substituição do glúten envolve a utilização de agentes espessantes, como amidos ou farinhas pré-gelatinizados, que podem ser obtidos por meio de processos físicos. Neste contexto, o objetivo deste estudo foi avaliar as características físico-químicas e tecnológicas da farinha de araruta (FA), FA modificada por ultrassom (FAU) em função da intensidade e tempo, e FA modificada por tratamento térmico de baixa umidade (FATTBU) em função da temperatura e tempo, além de caracterizar FAU e FATTBU selecionadas, visando sua futura aplicação em produtos sem glúten. Todas as variáveis independentes afetaram (P<0.05): índice de absorção de água (IAA) e o índice de solubilidade em água (ISA) a 28 °C, ISA a 80 °C, viscosidade de pico, viscosidade final, tendência a retrogradação e entalpia de gelatinização (ΔH). A FAU selecionada foi processada em 15 min em intensidade do ultrassom de 43,5%, enquanto FATTBU a 105 ºC por 15 min. Ambas não apresentaram diferenças significativas em relação à composição proximal. A modificação da FA tanto por ultrassom como por tratamento térmico com baixa umidade é viável, e é possível prever a sua utilização na formulação de alimentos sem glúten, devido as suas características físico-químicas serem mais apropriadas que a da FA.

ABSTRACT: Arrowroot is a plant abundant in starch content, and because it does not possess gluten proteins in its composition, its utilization is of great interest in the production of food for people who are intolerant to these proteins. The substitution of gluten involves the use of thickening agents, such as pre-gelatinized starches or flours, which can be obtained by physical processes. In this context, the aim of this study was to evaluate the physicochemical and technological characteristics of arrowroot flour (AFU) modified by ultrasound, in the functioning of intensity and time, and modified by low humidity heat treatment (LHHT) as a function of temperature and time. Besides characterizing AFU and AFLHHT, we aimed their future application in products without gluten. All independent variables affected (P<0.05) water absorption index (WAI) and water solubility index (WSI) at 28 °C; WSI was at 80 °C, peak viscosity, final viscosity, setback and enthalpy of gelatinization (ΔH). The selected AFU was processed in 15 min at an ultrasound intensity of 43.5%, while AFLHHT was at 105 °C for 15 min. Neither of them presented significant differences in relation to their proximal composition. It is concluded that the modification of AF by both methods is feasible, and it is possible to predict its use in the formulation of foods without gluten, due to their physicochemical and technological characteristics which are more appropriate than those of AF.

Abstract The aim of this study was to evaluate in sherbet formation the effects of sugar, milk, and jambolan pulp quantity on the overrun, color, physicochemical characteristics, microbiological characteristics, and acceptance of the experimental sherbets, in addition to evaluating the bioactive compounds of the selected product. Seven formulations were established through the Simplex method. The formulation with 20g 100g-1 sugar, 45g 100g-1 milk, and 35g 100g-1 jambolan pulp was selected (S5) because it was included among the most accepted sensorially (S4 and S5), and also presented higher overrun, chroma, SST/AT, and pH than S4, receiving the scores 8.0; 8.2, 6.4 and 7.1 and 6.1, respectively, for appearance, color, flavor, texture, and odor. The selected sherbet presented a high total phenolic compound content of 192mg gallic acid g-1, and a percentage of DPPH inhibition of 73%. It is concluded that it is possible to produce jambolan sherbet with desirable physical, chemical, microbiological, and sensory characteristics, which can increase the possibilities of applying the fruit as an ingredient in the edible ice cream industry.

Abstract Different proportions of sugar cane juice, toasted baru nut and extruded rice bran were used in the formulation of sugar cane candies (“rapaduras”), and the effect on color, hardness and proximate composition determined. The best formulation was selected on the basis of composition, hardness and luminosity, and evaluated for sensory acceptance and purchase intent. Simplex design was used to plan the experiment and the limits of the different ingredients. Sugar cane juice has lower values for ash, protein, lipids and total fiber compared to the other ingredients, but it is the ingredient that characterizes the product. The added ingredients affect the physical and chemical characteristics of the “rapaduras”. The hardness of the experimental “rapaduras” varied between 20 and 26.1 N, similar to the traditional product, while protein (from 3.28 to 5.9 g 100 g-1), lipids (from 3.87 to 7.67 g 100 g-1), and total dietary fiber (1.47 to 2.67 g 100 g-1), were above the values of the traditional product. Addition of 15 g 100 g -1of extruded rice bran and 10 g 100 g-1of toasted baru nut to 75 g 100 g -1 of sugar cane juice delivered a product with low microbiological risk and good sensory acceptance. The developed product with extruded rice bran and toasted baru nut has good technological potential, allied with sensory and nutritional advantages, and it can be an alternative to add value to rice by-product and nuts from areas of forest conservation.