Abstract The application of the centrifugal concentration gains importance in the world scenario, considering the low environmental impact and the concentration of fine particles. Literature does not present articles using centrifugal concentration (Falcon) for chromite. The material used in the tests is the tailings from a Northeastern Brazil concentration plant, which was homogenized in the laboratory. In the process assays, the number of G (25-300 G) and the fluidization water pressure (20-100 kPa) were optimized. The initial tests used a wide range of particle size of 1 kg mass, with the "best results" being for 50 and 100 G at a pressure of 60 and 80 kPa, respectively, where a metallurgical recovery of 25% and grade close to 20% of Cr2O3 were obtained. The amount of mass showed to be a significant variable in the process, being 250 g the ideal for the material used, which obtained considerable recoveries, even though the grade is still low. These results led to a cut at 250 µm, considering that the liberation of the chromite is of the order of 77 %. The best result was with 150 G and fluidization water pressure of 60 kPa for a metallurgical recovery of 72% and a grade of 28% Cr2O3.

Sugarcane (Saccharum spp.) is an efficient and sustainable alternative for energy generation compared to non-renewable sources. Currently, during the mechanized harvest process, the straw left in the field can be used in part for the second generation ethanol and increasing the electric energy production. Thus, this study aimed to provide information on the potential for residual biomass cultivars of sugarcane cropping system. This study provides the following information: yield of straw, depending on the calculated leaf area index and the number of tillers per linear meter; primary energy production of several sugarcane genotypes; contribution of dry tops and leaves; biomass yield; and evaluation of fiber, cellulose, hemicellulose and lignin. Preliminary results obtained by researchers of the State of São Paulo, Brazil, and reCviews related studies are presented. The results suggest that the production of sugarcane straw content varies according to the cultivars; the greater mass of sugarcane straw is in the top leaves and that the potential for the crude energy production of sugarcane per area unit can be increased using fiber-rich species or species that produce more straw. The straw indexes was shown to be a good indicator and allow the estimation of straw volumes generated in a sugarcane crop. The cellulose, hemicellulose and lignin composition in sugarcane is distinct among varieties. Therefore, it is possible to develop distinct biomass materials for energy production and for the development of sugarcane mills using biochemical processes and thermal routes.