Abstract The objective of this study was to map, through a scoping review, the evidence available in the literature on the use of platelet concentrates in compromised patients undergoing oral surgeries. Searches were performed in electronic databases for clinical studies with compromised patients undergoing oral surgery who used platelet concentrates. Only studies published in English were included. Two independent researchers carried out the selection of studies. The study design and objective, surgical procedure and platelet concentrate used, systemic involvement, analyzed outcome, and main results were extracted. A descriptive analysis of the data was performed. Twenty-two studies met the eligibility criteria and were included. Case series was the most frequent study design among the included studies (41.0%). In terms of systemic disability, 19 studies reported patients with cancer and related to surgical treatment 16 studies reported patients underwent treatment for osteonecrosis related to the use of the drug. The most used platelet concentrate was pure platelet-rich fibrin (P-PRF). In general, most studies recommend the use of platelet concentrates. Thus, the results of this study suggest that the evidence related to the use of platelet concentrates in compromised patients when undergoing oral surgeries is still initial. Also, most studies assessed the use of platelet concentrates in patients with osteonecrosis.

Resumo O objetivo do estudo foi mapear, através de uma revisão de escopo, as evidências disponíveis na literatura sobre o uso de agregrantes plaquetários em pacientes comprometidos e que realizaram cirurgias odontológicas. Pesquisas foram realizadas em bases de dados por estudos clínicos com pacientes comprometidos que realizaram cirurgia odontológica e usaram agragantes plaquetários. Apenas estudos em inglês foram incluídos. Dois pesquisadores independentes realizaram a seleção dos estudos. Os seguintes dados foram extraídos: desenho do estudo, objetivo, procedimento cirúrgico, agregante plaquetário usado, envolvimento sistêmico, desfecho analisado e principais resultados. Uma análise descritiva dos dados foi realizada. Vinte e dois estudos preencheram os critérios de elegibilidade e foram incluídos. Série de casos foi o desenho de estudo mais frequente entre os estudos incluídos (41,0%). Em relação ao comprometimento sistêmico, 19 estudos reportaram pacientes com câncer e em relação ao tratamento cirúrgico, 16 estudos reportaram pacientes que realizavam tratamento para osteonecrose relacionada ao uso de medicamentos. O agregante mais utilizado foi o plasma rico em fribina (P-PRF). Em geral, maioria dos estudos recomendou o uso dos agregantes plaquetários. Assim, os resultados desse estudo sugerem que a evidência relacionada ao uso de agregantes plaquetários em pacientes comprometidos que realizam cirurgia odontológica é ainda inicial. Ainda, a maioria dos estudos avaliaram o uso de agregantes plaquetários em pacientes com osteonecrose.

Resumo O objetivo neste estudo foi avaliar por meio do método por elemento finito tridimensional (3D-AEF) a biomecânica envolvida na infraestrutura do sistema barra-clipe para overdentures. Os fatores de estudo foram inclinação mésio-distal entre implantes (-10, -5, 0, 5, 10 graus) e diferentes seções transversais da barra metálica (circular, oval e Hader) com desajuste horizontal (50 e 150 µm). Valores de inclinação positivas (5 e 10 graus) indicam inclinação do implante para mesial e valores negativos (-5 e -10 graus) mostram inclinação para distal, enquanto zero grau indica implantes paralelos. Valores de tensões equivalentes de von Mises foram utilizadas nos sistemas barra, parafuso e implante. Tensão máxima e mínima principal, e cisalhante foram utilizadas para análise do osso alveolar peri-implante. Implantes paralelos promoveram menores tensões em tecido peri-implante; as inclinações para mesial apresentaram piores resultados para as estruturas protéticas e implantes. As diferentes seções transversais da barra não mostraram influência na distribuição de tensões no osso alveolar peri-implante. Concluindo, a barra circular apresentou melhores resultados para os componentes protéticos e maiores valores de tensões foram observados em todos os modelos na medida que o desajuste aumentou.

Abstract The aim of this study was to evaluate by three-dimensional finite element analysis (3D-FEA) the biomechanics involved in bar-framework system for overdentures. The studied factors were latero-lateral angulation in the right implant (-10, -5, 0, 5 and 10 degrees), and different bar cross-sections (circular, Hader and oval) presenting horizontal misfits (50 or 150 µm) on the opposite implant. Positive angulation (5 and 10 degrees) for implant inclination to mesial position, negative angulation (-5 and -10 degrees) for distal position, and zero degree for parallel implants. The von Mises stresses evaluated the bar, screw and the implant; maximum principal, minimum principal and shear stress analyses evaluated the peri-implant bone tissue. Parallel implants provide lower stress in alveolar bone tissue; mesial inclined bars showed the most negative effect on prosthetic structures and implants. In conclusion, bar cross-section showed no influence on stress distribution for peri-implant bone tissue, and circular bar provided better behavior to the prosthetic system. Higher stress concentration is provided to all system as the misfit increases.

Resumo Introdução A qualidade das próteses totais pode ser influenciada pelo método de confecção. Objetivo Avaliar a influência de diferentes métodos de confecção de próteses totais na adaptação e movimentação de dentes. Material e método A confecção das próteses foi dividida em dois grupos (n=10) para arcadas superior e inferior de acordo com o método: 1) convencional de uma etapa - realizada uma base de prova em cera onde foram montados os dentes e levada para a termopolimerização; 2) Método de duas etapas - a base foi encerada e termopolimerizada. Com a base da prótese polimerizada, os dentes foram montados e em seguida realizou a polimerização da outra porção. Para movimentação de dentes foram avaliadas as distâncias entre incisivos (I-I), pré-molares (PM-PM), molares (M-M), incisivo esquerdo a molar esquerdo (IE-ME) e incisivo direito a molar direito (ID-MD) antes e após polimerização final. As próteses foram seccionadas em três posições para análise de adaptação: (A) face distal de caninos, (B) face mesial de primeiros molares, e (C) face distal de segundos molares. Resultado As bases das próteses demonstraram melhor adaptação quando polimerizadas no processo de uma etapa, tanto superiores (p<0,05) quanto inferiores (p<0,05), com a região A apresentando melhor adaptação que a região C. Na arcada superior uma redução na distância entre I-I foi observada na técnica de uma etapa, enquanto que na técnica de duas etapas houve redução na distância ID-MD. Na arcada inferior, na técnica de uma etapa houve redução na distância ID-MD e houve redução significativa na distância IE-M pelo método de duas etapas. Conclusão O método de uma etapa apresentou melhores resultados para a adaptação da prótese. Ambos os métodos de confecção apresentaram alteração na movimentação de dentes.

Abstract Introduction The quality of complete dentures might be influenced by the method of confection. Objective To evaluate the influence of two different methods of processing muco-supported complete dentures on their adaptation and teeth movements. Material and method Denture confection was assigned in two groups (n=10) for upper and lower arches according to polymerization method: 1) conventional one-stage - a wax trial base was made, teeth were arranged and polymerized; 2) two-stage method - the base was waxed and first polymerized. With the denture base polymerized, the teeth were arranged and then, performed the final polymerization. Teeth movements were evaluated in the distances between incisive (I-I), pre-molars (P-P), molars (M-M), left incisor to left molar (LI-LM) and right incisor to right molar (RI-RM). For the adaptation analysis, dentures were cut in three different positions: (A) distal face of canines, (B) mesial face of the first molars, and (C) distal face of second molars. Result Denture bases have shown a significant better adaptation when polymerized in the one-stage procedure for both the upper (p=0.000) and the lower (p=0.000) arches, with region A presenting significant better adaptation than region C. In the upper arch, significant reduction in the distance between I-I was observed in the one-stage technique, while the two-stage technique promoted significant reduction in the RI-RM distance. In the lower arch, one-stage technique promoted significant reduction in the distance for RI-RM and two-stage promoted significant reduction in the LI-LM distance. Conclusion Conventional one-stage method presented the better results for denture adaptation. Both fabrication methods presented some alteration in teeth movements.

<p>Este estudo avaliou a força de tração de infraestruturas fundidas confeccionadas pela técnica da infraestrutura cimentada sobre pilares preparados utilizando dois diferentes cimentos resinosos. Quarenta análogos de pilares multi-unit foram individualmente fixados com resina acrílica quimicamente ativada em cilindros de PVC utilizando um delineador. Pilares cilíndricos foram torqueados aos pilares multi-unit para serem usados como espaçadores e, então, pilares calcináveis UCLA foram posicionados sobre eles. Estes pilares foram fundidos em liga de Ni-Cr e divididos em 4 grupos (n=10): cimentados com RelyX U100(r); cimentados com RelyX U100(r) e simulação do processo de polimerização da resina acrílica; cimentados com Multilink(r); e cimentados com Multilink(r) e simulação do processo de polimerização da resina acrílica. Os pilares foram cimentados de acordo com as recomendações dos fabricantes. Em máquina universal de ensaio, a resistência à tração foi aplicada na direção do longo eixo dos pilares a uma velocidade de 1 mm/min até o deslocamento do pilar cimentado ser obtido. Os valores da tração máxima (N) necessária para o deslocamento dos pilares cimentados foram tabulados e analisados estatisticamente pela ANOVA de 1 fator com 95% de nível de confiança. Diferença estatisticamente significativa não foi encontrada entre os grupos (p>0,05). Houve um aumento na força média de tração quando os espécimes foram submetidos à simulação de processo de polimerização da resina acrílica, mas os resultados não diferiram estatisticamente. Ambos os cimentos resinosos apresentaram resultados positivos no que diz respeito à retenção dos pilares cimentados em seus respectivos pilares multi-unit. Ambos os materiais podem ser indicados para a técnica da infraestrutura cimentada sobre pilares preparados quando os profissionais buscam melhor adaptação de infraestruturas de próteses implanto-suportadas.</p>

<p>This study evaluated the tension force of cast frameworks made by the technique of framework cemented on prepared abutments using two different resin cements. Forty multi-unit abutment analogs were individually fixed with chemically cured acrylic resin inside PVC cylinders using a parallelometer. Brass cylindrical abutments were tightened to the multi-unit abutments to be used as spacers and then castable UCLA abutments were positioned above. These abutments were cast with Ni-Cr and then divided into 4 groups (n=10): cemented with RelyX U100(r); cemented with RelyX U100(r) and simulation of acrylic resin polymerization process; cemented with Multilink(r); and cemented with Multilink(r) and simulation of acrylic resin polymerization process. Abutments were cemented according to manufacturers' instructions. In a universal testing machine, tensile strength was applied in the direction of the long axis of the abutments at 1 mm/min crosshead speed until displacement of the luted abutments was obtained. The values of maximum tensile force (N) required for the displacement of the luted abutments were tabulated and analyzed statistically by one-way ANOVA with a 95% confidence level. No statistically significant difference was found among the groups (p>0.05). There was an increase in mean tension force when the specimens were subjected to the simulation of acrylic resin polymerization process, but the results did not differ statistically. Both resin cements presented positive results as regards the retention of luted abutments on their respective multi-unit abutments. Both materials may be indicated for the technique of framework cemented on prepared abutments when professionals pursuit better adaptation of implant-supported frameworks.</p>

Elderly patients generally use several types of medication, some of which may cause oral side effects. Aim: To investigate the oral side effects caused by medication in an elderly sample. Methods: Three hundred patients were interviewed about their use of medication and were divided in two groups: institutionalized (n=150) and community-dwelling (n=150) elderly. Results: The most used drugs were antihypertensives (53%) for community-dwelling elders and antiulceratives (76%) for the institutionalized ones. The more prevalent side effects were taste alterations that occurred in 19%, dry mouth in 17% and teeth staining in 2%. Conclusions: A high prevalence of oral side effects from medications used by the elderly was found in this study. The health professionals should be aware of the possible side effects caused by prescribed medications.

AIM: To evaluate health parameters (blood pressure, heart rate and blood glucose), the use of medicines and alcohol consumption in elderly residents in the city of São José dos Campos, SP, Brazil. METHODS: A sample of 500 elderly individuals (98 men and 402 women, with mean age of 69.5 years) was examined. Personal data and medicines used by the patients were recorded, general health aspects were assessed and the Alcohol Use Disorders Identification Test (AUDIT) was applied to survey alcohol consumption. RESULTS: Two hundred and four patients (40.8%) presented high blood pressure and 93 patients (18.6%) had hyperglycemia. The most used pharmacological groups were antihypertensive drugs, antilipidemics, drugs to control hypothyroidism and hypoglycemic agents. Possible pharmacological interactions with alcohol were present in 60.9% of the used medicines. The AUDIT results showed that 91% of the sample presented a low-level intake of alcohol and only 1% presented characteristics of alcohol addiction. Associations were found among AUDIT scores with age (p=0.037), since a larger number of alcohol addicts were found among younger patients, and use of drugs (p=0.046), since patients who consumed more daily medicines made less use of alcohol (low-level). CONCLUSIONS: The studied sample presented a high prevalence of hypertension and relatively low incidence of diabetes. A low use of drugs was verified and women made more use of daily medications than men. Low alcohol consumption was also observed, and women consumed less alcohol than men.

This study's aims was to evaluate the stress distribution in a mandibular implant-supported prosthesis and peri-implant bone considering implant quantity, diameter and position using linear 3-D finite element analysis. Models of an anterior jaw comprised 4 groups according to implant quantity, diameter, and position: control group C, 5 regular implants; R, 3 regular implants; W, 3 wide implants; and DTR, 3 regular implants with the distal ones tilted 30º distally. The cantilever was loaded with an axial load of 50 N. Data was evaluated using von Mises stress on implants and maximum principal stress and microstrain on the bone. The W group showed the lowest value of maximum principal stress in peri-implant bone of the loaded side (4.64 MPa) when compared to C (5.27 MPa), DTR (5.94 MPa), and R (11.12 MPa). Lower stress values in the loaded implants were observed in the experimental groups when compared to the C group. However, the unloaded implants presented opposite results. All the screws of the W group presented lower stress values when compared to the C group. However, the R and DTR groups presented an increase in stress values with the exception of the loaded screw. A reduction in the number of implants associated with wider implants reduced the stress in the bone and prosthetic components.