RESUMO A cerâmica à base de fosfato de cálcio hidroxiapatita (Hap) é muito utilizada para reparos ósseos por ser um biomaterial biocompatível e apresentar propriedades osteocondutoras e osteoindutoras. No entanto, a baixa resistência mecânica da Hap pode limitar sua aplicabilidade. Assim, o presente trabalho tem como objetivo melhorar as propriedades mecânicas da Hap, associando-a à alumina (Al2O3), pela técnica de metalurgia do pó, que consiste na moagem dos pós precursores em moinho planetário, prensagem uniaxial e sinterização. A microestrutura e a resistência mecânica das amostras sinterizadas foram avaliadas através dos testes de densidade, microdureza, resistência à compressão e molhabilidade. Concluiu-se que o uso de Al2O3 no compósito melhora as propriedades mecânicas da Hap, enquanto diminui seu potencial hidrofílico. Assim, a composição com 40% de Hap / 60% de Al2O3 foi considerada a melhor para aplicações biomédicas.
ABSTRACT The hydroxyapatite calcium phosphate based ceramic (Hap) is widely used for bone repair, as it is a biocompatible biomaterial and because it has osteoconductive and osteoinductive properties. However, the low mechanical strength of Hap may limit its applicability. Thus, the present work aims to improve the mechanical properties of Hap, associating it with alumina (Al2O3), using the powder metallurgy technique, which consists in the milling of the precursor powders in a planetary ball mill, uniaxial pressing and sintering. The microstructure and mechanical strength of the sintered samples were evaluated using density, microhardness, compressive strength and wettability tests. It was concluded that the use of Al2O3 in the composite improves the mechanical properties of Hap, while decreases its hydrophilic potential. Thus, the composition with 40% Hap / 60% Al2O3 was considered the best for biomedical applications.