RESUMO A indústria da construção tem procurado o uso de soluções sustentáveis, uma delas é a incorporação de resíduos como materiais de construção. Para isso, estudos vêm sendo desenvolvidos para analisar a viabilidade da incorporação desses resíduos em argamassas e concretos, visto que essas inserções alteram aspropriedades dos materiais tanto no estado endurecido quanto fresco. A análise de materiais como pastas, argamassas ou concretos em seu estado fresco está diretamente ligada ao estudo de uma simulação das solicitações que essas podem sofrer durante sua mistura, transporte e aplicação. Os materiais constituintes e a relação água/aglomerante têm um papel fundamental nas propriedades das pastas. Características como a finura do aglomerante, a forma da partícula e a origem mineralógica podem afetar diretamente a sua trabalhabilidade. Para o entendimento do comportamento reológico de pastas cimentícias no estado fresco, várias técnicas podem ser utilizadas como a reometria de fluxo e oscilação, o método do espalhamento pelo mini-cone, escoamento pelo Funil de Marsh, método do Squeeze flow e o Vane test. Neste trabalho estudouse o comportamento reológico de diferentes pastas cimentícias preparadas com o cimento Portland CP V-ARI RS e adição de metacaulim (MC) e adição de resíduo de tijolo cerâmico moído (RTM). As pastas foram analisadas para diferentes tempos de hidratação e também difrentes relações água/aglomerante. O estudo se deu através de medições de parâmetros reológicos como tensão de escoamento e viscosidade, usando um reômetro rotacional de placas paralelas. Os resultados mostraram que o RTM provocou uma diminuição na tensão de escoamento inicial quando comparado com o uso do MC, o que pode contribuir para uma mistura com maior facilidade de manuseio, ou seja, menos viscosa.
ABSTRACT The construction industry has sought the use of sustainable solutions, one of which is the incorporation of waste as building materials. For this, studies have been developed to analyze the viability of the incorporation these residues in mortar and concrete, since these inserts modify the properties of the materials both in the hardened and fresh state. The analysis of materials such as pastes, mortars or concretes in their fresh state is directly linked to the study of a simulation of the requests that they may suffer during their mixing, transportation and application. The constituent materials and the water / binder ratio have a fundamental role in the properties of the pastes. Characteristics of the materials such as the fineness of the binder, the shape of the particle and the mineralogical origin can directly affect its workability. For the understanding of the rheological behavior of cement pastes in the fresh state, several techniques can be used such as flow and oscillation rheometry, the mini-cone spreading method, Marsh funnel flow, Squeeze flow method and the Vane test. In this work the rheological behavior of different cementitious pastes prepared with Portland cement CP V-ARI RS and addition of metakaolin (MK) end ceramic brick wastes (CBW) was studied. The pastes were analyzed for different hydration times and water/binder ratios. The experiment was carried out through measurements of rheological parameters such as flow stress and viscosity, using a parallel plate rotational rheometer. The results showed that the CBW caused a decrease in the initial flow stress when compared to the use of MK, which may contribute to a mixture with easier handling, that is, less viscous.