ABSTRACT Objective: Percutaneous ethanol injection (PEI) is an alternative to surgery for the treatment of thyroid nodules (TNs). However, size reductions of treated (TTNs) and untreated TN (UTNs) have not been compared. Volumetric reductions in TTNs with PEI were evaluated by comparing TTNs and UTNs in the same patient, and independent variables predicting good post-PEI outcomes were analyzed. Materials and methods: Overall, 282 patients with multinodular goiters were selected. Two nodules located in different lobes were compared for common disease behaviors. Overall, 150 nodules were selected from 75 patients (6 M: 69 F) with a mean age of 50.1 ± 17.4 years. This prospective nonrandomized intervention study prioritized treating TNs of greater volume or single hyperfunctioning TNs. A single observer experienced in PEI and an ultrasound specialist performed the interventions. Results and discussion: TTNs (mean volume: 14.8 ± 16.2 mL) were reduced by 72.6 ± 27.3% of their initial volume, while UTNs increased by a mean of 365.7 ± 1.403.8% (p < 0.00001). The patients underwent a mean of 4.0 ± 3.1 outpatient PEI sessions without relevant complications. Logistic regression analysis showed that the magnitude of the PEI induced reduction was associated with the number of treatment sessions (p = 0.03, CI [1.1-38.2]) and not with ultrasonographic characteristics of the nodules. Each PEI session increased the rate of TN reduction by a factor of 6.7. Conclusions: PEI is a well-tolerated outpatient procedure that effectively reduces the volume of TNs and is noticeably superior to conservative treatment for all ultrasonographic classifications.

Resumo Nesse estudo avaliou-se os impactos do aumento dos GEE's (cenário RCP 8.5) e dos desflorestamentos no ciclo da água na bacia do rio Madeira, utilizando o Modelo Regional Eta e o Modelo Hidrológico de Grandes Bacias (MGB), forçado com o Brazilian Earth System Model Ocean-Atmosphere versão 2.5 (BESM-OA 2.5). No cenário RCP 8.5, o modelo apresentou sensibilidade sobre toda a bacia do Madeira, com aumento da ordem de 4.0 °C na temperatura. O aumento foi intensificado com os cenários de desflorestamentos de 2050 (4.8 °C) e 2100 (6.2 °C). Nos cenários de desflorestamento predominou-se o Mecanismo de Retroalimentação Negativo, pois embora haja reduções na precipitação e evapotranspiração, a convergência de umidade aumentou em todos os cenários. Observou-se aumento das descargas na maioria das estações para todos os cenários futuros RCP 8.5 e desflorestamento. O aumento da precipitação na estação seca explicou em parte o aumento das vazões e na área de inundação sobre a bacia do Madeira. O aumento na precipitação à montante da bacia e a mudança nos parâmetros do solo, associada às alterações no uso da terra, contribuíram para o aumento da vazão e área de inundação sobre a bacia do Madeira. As alterações nas descargas e na área de inundação podem ter efeitos negativos, com prejuízos e danos ao meio ambiente, nos recursos hídricos, nos principais setores da economia, afetando de forma direta as comunidades que vivem às margens dos rios, principalmente as populações vulneráveis da bacia do Madeira.

Abstract In this study, we evaluated the impacts of increased GHGs (RCP 8.5 scenario) and future deforestations on the water cycle in the Madeira River basin by using the Eta Regional Model and MGB-IPH Large-scale Hydrological Model, forced by Brazilian Model of the Terrestrial System (BESM-AO 2.5). In the RCP 8.5 scenario, the model demonstrated sensitivity over the entire Madeira basin, with a temperature increase of 4.0 °C. The increase was intensified with the deforestation scenarios for 2050 (4.8 °C) and 2100 (6.2 °C). In the deforestation scenarios, the Negative Feedback Mechanism (NFM) was predominant because, although there were reductions in precipitation and evapotranspiration, the convergence of humidity presented an increase in all the scenarios. Regarding the hydrological processes, an increase in the discharges in most stations for all future scenarios for RCP8.5 and deforestation was observed. The increase in precipitation in the dry season explains in part the increase in the discharges and in the flood area in the Madeira basin. The increased upstream precipitation and the changes in soil parameters associated with the changes in land use contributed to the increase in the flood area over the Madeira basin. These changes can have negative effects on the environment, on water resources and on the main sectors of the economy, which directly affect the communities that inhabit the river banks, especially the vulnerable populations of the Madeira basin.

Abstract Al2O3 (alumina) and MgO·Al2O3 (spinel) inclusions cause valve obstruction (clogging) in continuous casting and can deteriorate the quality of the final product. In this context, industrial heats of the bearing steel SAE 52100 was examined. Samples were collected in the final steps of the steelmaking process, both after vacuum treatment and during continuous casting. A scanning electron microscope (SEM) equipped with a energy-dispersive spectrometer (EDS) and automated particle characterization analysis was used to characterize the inclusions present in the steel samples. Thermodynamic calculations were performed with the commercial software FactSageTM 7.2. Based on thermodynamic predictions, parameters such as solid fraction, liquid fraction, MgO saturation point of the slags, content of dissolved elements in steel (Al, Mg, Ca,...) and the construction of a phase stability diagram were determined. The results in this study showed a tendency for increase in MgO content in the inclusions with the decrease of %FeO and SiO2 contents in the slag, an increase of binary basicity (%CaO/%SiO2). It is verified that the MgO contents in the slag were close to the saturation, increasing the probability for the formation of inclusions rich in MgO and/or spinel. On the other hand, stability diagrams confirm the formation of spinel inclusions for each of the heats analyzed. During the final step of the steelmaking process, there is a tendency for re-oxidation, which is verified by an increase in the density of inclusions (or total oxygen TO values).

RESUMO O jatobá (Hymenaea courbaril L.) é uma espécie que apresenta importância ecológica e ocorre em diferentes regiões geográficas do Brasil. Conhecer e avaliar a existência de locais com maior variabilidade genética pode auxiliar em programas e ações de conservação. Neste contexto, o presente estudo objetivou avaliar a diversidade genética e a estrutura em populações naturais de jatobá com ocorrência na Amazônia mato-grossense por meio de marcadores ISSR. Foram amostrados 54 indivíduos em 3 populações, sendo uma no município de Marcelândia (MA=24) e duas no município de Alta Floresta (Comunidade Central AF=17 e Pista do Cabeça PC=13 indivíduos). DNA genômico total foi extraído de tecido foliar pelo método CTAB. Os 54 indivíduos foram genotipados com 10 primers ISSR. Foram amplificados um total de 110 fragmentos, sendo 78,2% polimórficos. Os maiores índices de diversidade foram encontrados na população de MA (H=0.25; I=0.37 e %P=65.45). A distância genética foi maior entre as populações dos dois municípios (0.17 entre MA e AF; 0.16 entre MA e PC). A análise de variância molecular (AMOVA) indicou que 31.79% da variância total está entre populações e 68.21% dentro de populações. Há diversidade genética nas populações nativas de jatobá na Amazônia mato-grossense. Recomenda-se que sejam preservados indivíduos de ambas as populações, a fim de garantir a manutenção da variabilidade genética e a conservação efetiva da espécie na Amazônia mato-grossense.

ABSTRACT Jatobá (Hymenaea courbaril L.) is a species that shows ecological importance and occurs in different geographic regions in Brazil. Knowing and evaluating the existence of places with higher genetic variability can help in conservation programs and actions. In this context, the present study aimed to evaluate the genetic diversity and structure in natural populations of Jatobá with occurrence in Mato Grosso Amazon through ISSR markers. Fifty-four individuals were sampled in three populations, being one in the municipality of Marcelândia (MA=24) and two in the municipality of Alta Floresta (Comunidade Central AF=17 and Pista do Cabeça PC=13 individuals). Total genomic DNA was extracted from the leaf tissue by the CTAB method. The 54 individuals were genotyped with 10 ISSR primers. A total of 110 fragments were amplified, being 78.2% polymorphic. The greatest diversity indices were found in the population from MA (H=0.25; I=0.37 and %P=65.45). The genetic distance was higher among the populations of the two municipalities (0.17 between MA and AF; 0.16 between MA and PC). The analysis of molecular variance (AMOVA) indicated that 31.79 % of the total variance is among populations and 68.21 % within populations. There is genetic diversity in native populations of Jatobá in Mato Grosso Amazon. We recommend that individuals from both populations be preserved, in order to ensure the maintenance of genetic variability and the effective conservation of species in Mato Grosso Amazon.

Abstract This study focuses on the viscosity calculation of molten slags using computational thermodynamics. Different slag systems and their measured viscosities from different references were used and compared with those obtained through FactSage software. To calculate the viscosity of each slag the Viscosity module available in FactSage 6.4 was used. In order to perform the evaluation of computational thermodynamics in viscosity calculation, six different slag systems were presented, all of which were formed of calcium-silicate melts. In total, 162 slags, in temperatures ranges from 1423 K (1150 ºC) to 2089 K (1816 °C) were presented for all slag systems. The software showed a tendency to produce viscosity values lower than those found in the literature measured by an experimental method. The relative deviation between the measured and calculated viscosity values is in the range of 13.31 to 37.53% for evaluated systems. Considering all references and systems, the average deviation between measured and calculated viscosities is 23.61%, which, according to literature, is an acceptable value. The CaO-SiO2-Al2O3 and CaO-SiO2-FeO systems showed the best agreement between the experimental method and the method calculated through FactSage 6.4 with a very good fitting between viscosity values.

Secondary refining slag samples with different chemical compositions (45-54 % CaO, 7-13 % Al2O3, 20-29 % SiO2, 9-16 % MgO, 0-5 % CaF2) were investigated to verify the influence of their effective viscosity on inclusion cleanliness of DIN 38MnS6 in a steelmaking plant. The steel samples were collected during the production process for analysis of inclusions. Using the commercial software FactSage 6.4, thermodynamic calculations were performed to determine the effective viscosity, solid fraction, liquid fraction and MgO saturation point of these slags at 1560ºC. The results showed that all the slags were saturated in MgO, revealing a better protection of the ladle refractory. The addition of 2 to 5 % of CaF2 reduced the effective viscosity values for the analyzed slags from 0.45 Pa∙s to 0.10 Pa∙s , in comparison to the slags without the addition of CaF2, with an effective viscosity of 0.40 Pa∙s, 0.27 Pa∙s and 0.22 Pa∙s, decreasing the level of non-metallic inclusions for some of the analysed heats. However, it was detected during the manufacturing process that high slag fluidity and re-oxidation events continue to be a challenge associated with reducing the level of non-metallic inclusions.

The process of vacuum degassing occurs during the secondary refining of special steels. Its main function is to remove undesirable gases. However, during this process, flotation phenomenon and inclusions absorption are reported. The aim of the present work was to study the slag viscosity and vacuum degassing (tank type) capacity in steel cleanliness from an industry perspective. To achieve this objective, slag and steel samples were taken before and after the vacuum stage. The results in steel cleanliness were related to a kinetic stirring parameter (βs) of the vacuum station and to the effect of slag viscosity. The removal of inclusions during the vacuum stage reached 64, 75 and 78% in the diameter ranges of 2.5-5, 5-15 and ≥ 15 µm, respectively. After the degassing process, the composition of non-metallic inclusions seemed to approach the slags' chemical compositions. The stirring process in the vacuum degassing station promotes a significant decrease in the inclusion densities for the 2.5-15 µm diameter range and also in the sulfur content in liquid steel. Regarding the effective viscosities of slags, it was concluded that lower values (0.20 Pa.s) increased slag capacity in inclusion removal, whereas higher values (> 0.40 Pa.s) were detrimental to steel cleanliness.

Nesta pesquisa, objetivou-se avaliar o potencial de utilização da madeira de Schizolobium amazonicum "Paricá" e Cecropia hololeuca "Embaúba" para produção de painéis cimento-madeira. Foram produzidos painéis experimentais com densidade nominal de 1.200 kg/m³, utilizando cimento CP V ARI como aglutinante mineral e partículas de madeira sem tratamento e com tratamentos de imersão em água fria 12 horas, em água quente 6 horas e em hidróxido de sódio 2 horas. Os painéis foram prensados com pressão específica de 40 kgf/cm², a temperatura ambiente, tempo de prensagem / grampeamento de 24 horas e tempo de maturação de 28 dias. Os resultados das avaliações de propriedades de absorção de água, inchamento em espessura, ligação interna, módulo de elasticidade e módulo de ruptura demonstraram que as madeiras de Schizolobium amazonicum "Paricá" e Cecropia hololeuca "Embaúba", são tecnicamente viáveis para a produção de painéis cimento-madeira. Constatou-se também que os painéis de embaúba apresentam algumas propriedades superiores aos de paricá, e as partículas não necessitam obrigatoriamente de tratamentos.

This research was developed to evaluate the potential use of Schizolobium amazonicum "Paricá" and Cecropia hololeuca "Embaúba" wood for wood cement board manufacture. Panels with the density of 1.200 kg/m³ were made, using cement CP V ARI as mineral bonding and wood particles without treatment and treated with immersion in cold water, hot water and sodium hydroxide. The panels were pressed at the pressure of 40 kgf/cm², room temperature and press / clipping time of 24 hours and maturation time of 28 days. The evaluation of the properties of water absorption, thickness swelling, internal bond, modulus of elasticity and modulus of rupture, showed that Schizolobium amazonicum "Paricá" and Cecropia hololeuca "Embaúba" wood are technically feasible for wood-cement board manufacture. It was also found that the panels of embaúba exhibit some properties superior to those of the paricá, and the particles do not necessarily need treatment.

INTRODUCTION AND OBJECTIVE: Kidney disorders can cause essential hypertension, which can subsequently cause renal disease. High blood pressure is also common among those with chronic kidney disease; moreover, it is a well-known risk factor for a more rapid progression to kidney failure. Because hypertension and kidney function are closely linked, the present study aimed to observe the beneficial effects of low-intensity physical activity on structural and ultrastructural renal morphology and blood pressure in normotensive and spontaneously hypertensive rats. METHOD: Male Wistar-Kyoto rats and spontaneously hypertensive rats were randomly allocated into four groups: sedentary or exercised Wistar-Kyoto and sedentary or exercised spontaneously hypertensive rats. The exercise lasted 20 weeks and consisted of treadmill training for 1 hour/day, 5 days/week. RESULTS: The exercised, spontaneously hypertensive rats showed a significant blood pressure reduction of 26%. The body masses of the Wistar-Kyoto and spontaneously hypertensive strains were significantly different. There were improvements in some of the renal structures of the animals treated with physical activity: (i) the interdigitations of the proximal and distal convoluted tubules; (ii) the basal membrane of the proximal and distal convoluted tubules; and (iii) in the basal membrane, slit diaphragm and pedicels of the glomerular filtration barrier. The spontaneously hypertensive rats also showed a decreased expression of connexin-43. CONCLUSION: Physical exercise could be a therapeutic tool for improving kidney ultrastructure and, consequently, renal function in hypertensive individuals.