Chediak-Higashi syndrome (CHS) is an extremely rare autosomal recessive disorder characterised by recurrent pyogenic infections, partial oculocutaneous albinism, and mild bleeding. The most reliable finding that helps in diagnosis is abnormally large granules in leukocytes and other granule-containing cells. Herein we report a case of CHS in a 3-month-old girl who presented to us in the accelerated phase of the disease. The case is reported because of the extreme rarity of CHS presenting in the accelerated phase at diagnosis.

A estequiometria de poliânions formados pela ação do ácido nítrico sobre a solução de tungstato de sódio (< 0,01M) foi estudada por meio de técnicas eletrométricas envolvendo titulações potenciométricas e condutométricas. As inflexões e degraus bem definidas nas curvas de titulações forneceram evidências convincentes pela existência de poliânions, para-W12O41(10-) e meta-W12O39(6-) nas faixas do pH 5,7-6,0 e 3,6-4,1; correspondendo a razão H+:WO4(2-) como 7:6 e 9:6, respectivamente. A interação entre soluções de nitrato de lantânio e tungstato de sódio a específicos níveis de pH 8,0; 5,9 e 4,0 também foi estudada por titulações potenciométricas e condutométricas, nos meios aquoso e etanólico, com cada reagente usado alternadamente como titulante. Os experimentos eletrométricos forneceram evidências incontestáveis sobre a formação de tungstatos normal-La2O3.3WO3, para-5La2O3.36WO3 e meta-La2O3.12WO3 nas proximidades de valores de pH 6,3; 5,0 e 4,2; respectivamente. Investigações analíticas sobre os precipitados formados confirmam os resultados do estudo eletrométrico.

The stoichiometry of the polyanions formed by the action of nitric acid on sodium tungstate (< 0.01M) has been studied by means of electrometric techniques involving pH-potentiometric and conductometric titrations. The well defined inflections and breaks in the titration curves provide evidence for the existence of the polyanions, para-W12O41(10-) and meta-W12O39(6-) corresponding to the ratio of H+:WO4(2-) as 7:6 and 9:6 in the pH ranges 5.7-6.0 and 3.6-4.1, respectively. The interaction of lanthanum nitrate with sodium tungstate solutions, at specific pH levels 8.0, 5.9 and 4.0 was also studied by pH and conductometric titrations, in aqueous and alcoholic media, with each of the reagents alternatively used as titrant. The electrometric experiments provide definite evidence of the formation of normal-La2O3.3WO3, para-5La2O3.36WO3 and meta-La2O3.12WO3 tungstates in the vicinity of pH 6.3, 5.0 and 4.2, respectively. Analytical investigations on the precipitates formed confirm the results of the electrometric study.

This work on the process of biosorption of nickel and chromium in an ascendant continuous-flow, fixed packed-bed bioreactor of sanitary sewage sludge was conducted in a search for solutions to the environmental problem caused by heavy metals. Analysis of the results demonstrated that the absorbent had an extraordinary capacity for biosorption of the heavy metals studied at about 9.0 pH of the effluent, with a removal percentage of over 90.0% for the two metals. Chemometric study results demonstrated that 20 days of the experimental system function were sufficient for achieving the maximum efficiency of sorption of the heavy metals studied by the sanitary sewage sludge employed.

A natureza precisa da reação entre soluções de ácido nítrico e de ortho-vanadato de sódio foi estudada por técnicas electrométricas envolvendo titulações potenciométricas e condutométricas. As inflexões e degraus bem definidas nas curvas de titulações confirmaram a existencia de anions, piro-V2O7(4-), meta-VO3- e poli-H2V10O28(4-) correspondendo as razões de VO4(3-):H+ como 1:1, 1:2 e 1:2,6 na vizinhança do pH 10,5; 7,4 e 3,6, respectivamente. Ainteração entre soluções de nitrato de cério(III) e vanadato de sódio a específicos níveis de pH 12,4; 10,5; 7,4 e 3,6 também foi estudada por titulações potenciométricas e condutométricas entre os reagentes. Os pontos finais obtidos a partir de inflexções nítidas nas curvas de titulações forceram evidências incontestáveis sobre a formação e precipitação de vanadatos orto-Ce2O3.V2O5, piro-2Ce2O3.3V2 O5 e meta-Ce2O3.3V2O5 de cério nas proximidades dos valores de pH 7,4; 6,2 e 4,8, respectivamente. Investigações analíticas sobre os precipitados formados confirmam os resultados do estudo eletrométrico.

The precise nature of the reaction between nitric acid and sodium ortho-vanadate solutions has been studied by means of electrometric techniques involving potentiometric and conductometric titrations. The well defined inflections and breaks in the titration curves confirm the existence of the anions, pyro-V2O7(4-), meta-VO3- and poly-H2V10O28(4-) corresponding to the ratios of VO4(3-):H+ as 1:1, 1:2 and 1:2.6 in the neighborhood of pH 10.5, 7.4 and 3.6, respectively. The interaction of cerium(III) nitrate with sodium vanadate solutions, at specific pH levels 12.4, 10.5, 7.4 and 3.6 was also studied by potentiometric and conductometric titrations between the reactants. The end-points obtained from the sharp inflections in the titration curves provide definite evidence for the formation and precipitation of cerium ortho-Ce2O3.V2O5, pyro-2Ce2O3.3V2O5 and meta-Ce2O3.3V2O5 vanadates in the neighborhood of pH 7.4, 6.2 and 4.8, respectively. Analytical investigations on the precipitates formed confirm the results of the electrometric study.

Recently, thermoanalytic methods have frequently been used in the characterization of oils and fats. In this work, thermoanalytic and kinetic parameters of sunflower oils, with and without antioxidants, were evaluated using thermogravimetry / derivative thermogravimetry and differential scanning calorimetry. The thermogravimetric profiles for the sunflower oils had similar characteristics, showing a level stretch indicative of stability up to about 200ºC. Thermal decomposition of these oils occurred in three stages, related to the decomposition of polyunsaturated, monounsaturated and saturated fatty acids, respectively. DSC curves show two events that characterize the polymerization and decomposition of triglycerides. The heat capacities of the sunflower oils, obtained by DSC, showed a good correlation and were dependent on the composition of fatty acids. The kinetic parameters, obtained by non isothermal thermogravimetry by the Coats and Redfern, Madhusudanan, Horowitz and Metzger and Van Krevelen methods, were dependent on the antioxidant used. Increasing the frying time produced a decrease in the onset of thermal decomposition temperature in the sunflower oils analyzed.

Estudou-se o processo de eletrodeposição de uma camada amorfa de liga Ni-W-B sobre um cátodo, utilizando um banho contendo sulfato de níquel 0,0185 M, tungstato de sódio 0,0155 M, fosfato de boro 0,0364 M, citrato de sódio 0,0161 M, 1-docecilsulfato de sódio 0,017 g/L e hidróxido de amônio para pH 8,5. Estudos detalhados sobre a influência da temperatura do banho, agitação mecânica e densidade de corrente catódica conduziram as condições ótimas para obtenção de depósitos de ligas satisfatórias. Observou-se que esta liga apresentou, elevada resistência à corrosão e ao desgaste quando comparadas com o cromo duro, além de se comprovar, através da difratometria de raios X, sua característica amorfa. Estas ligas podem ter grande utilidade em várias aplicações nas indústrias químicas, petrolíferas, petroquímicas, navais, de construções civis e automobilísticas em decorrência de algumas características especiais, como alta resistência à corrosão e desgaste e à capacidade de manter suas propriedades mecânicas em altas temperaturas.

The process of electrodeposition of amorphous layer of Ni-W-B alloy on a cathode, using a bath containing 0.0185 M nickel sulfate, 0.0155 M sodium tungstate, 0.0364 M sodium citrate, 0.017 g/L 1-dodecylsulfate-Na and ammonia for pH adjustment to 8.5, has been studied. Detailed studies on bath temperature, bath agitation and cathode current density led to the optimum conditions for obtaining satisfactory alloy deposit. The alloy presented higher corrosion and wear resistance in comparison to the hard chromium, besides its amorphous characteristic verified by X-ray diffraction. These alloys should have great importance in various applications in chemical, petroleum, petrochemical, naval, automobile and civil construction industries due to their special characteristics such as high wear and corrosion resistance and the capacity to maintain their mechanical properties at high temperatures.

Optimization and control of an electrodeposition process for depositing boron-containing amorphous metallic layer of cobalt-molybdenum alloy onto a cathode from an electrolytic bath having cobalt sulfate, sodium molybdate, boron phosphate, sodium citrate, 1-dodecylsulfate-Na, ammonium sulfate and ammonia or sulfuric acid for pH adjustments has been studied. Detailed studies on bath composition, pH, temperature, mechanical agitation and cathode current density have led to optimum conditions for obtaining satisfactory alloy deposits. These alloys were found to have interesting properties such as high hardness, corrosion resistance, wear resistance and also sufficient ductility. A voltammetric method for automatic monitoring and control of the process has been proposed.

The aluminum electroreduction process is still faced with several problems such as high energy consumption, stability of cathode lining, development of nonconsumable anodes, current efficiency, alumina feeding and environmental problems with hazardous spent potliners and fluoride emissions. A short review of recent literature related to these problems has been provided. A critical analysis of these problems, based on practical experience with a modern plant, is also given.