An alternative green method was developed for the synthesis of thio-and selenoflavones by the ring closure of 2-chlorophenyl ethynyl ketone with NaHY (Y = S, Se). These nucleophilic chalcogen species were generated in situ using NaBH4 to reduce the elemental chalcogen in the presence of polyethylene glycol-400 (PEG-400). The efficiency of this reaction is strongly dependent on the PEG-400 solvent, acting like a crown ether, complexing with the sodium atom of NaHY species, making the chalcogen nucleophile more active. The synthetic protocol proceeded efficiently at 100 °C under argon, using a range of 2-chlorophenyl ethynyl ketone containing alkyl, aryl, or vinyl groups and the sulfur and selenium chalcogen. By this efficient and simple approach, 18 chalcogenoflavones were obtained in good to excellent yields after 2 h.

We present here our results on the temperature controlled, selective hydrochalcogenation of 1,4-diorganyl-1,3-butadiynes with nucleophilic species of selenium, tellurium and sulfur generated in situ from the respective diaryl dichalcogenide and NaBH4. Using polyethylene glycol (PEG)-400 at 30 ºC the (Z)-chalcogenoenynes are obtained and at 90 ºC the (Z,Z)-bis-chalcogen-1,3-butadienes are produced in good to excellent yields. Alternatively to conventional oil bath heating, the use of microwave irradiation is also presented as an alternative energy source that provides the expected products in few minutes.

We present here our results in the synthesis of eleven new 3-(1H-1,2,3-triazol-1-yl)-2-(arylselanyl)pyridines by copper-catalyzed azide-alkyne cycloaddition reactions. The reactions were performed in the presence of catalytic amount of copper(II) acetate and sodium ascorbate using a mixture of tetrahydrofuran/water (1:1) as solvent at room temperature in air. The reaction is tolerant to different functional groups such as substituted-benzene rings, alcohol and ester and none electronic or steric influence was observed. All the products were obtained in good to excellent yields. Alternatively to the conventional oil bath heating, the use of microwave irradiation or ultrasound methods is also presented as alternative energy sources.

<p>We describe here a simple method to synthesize 4-arylselanylpyrazoles by reaction of α-arylselanyl-1,3-diketones with arylhydrazines using glycerol as solvent at 60 °C under N2 atmosphere. This is a direct cyclocondensation reaction performed with α-arylselanyl-1,3-diketones and arylhydrazines bearing electron-withdrawing and electron-donating groups affording the corresponding 4-arylselanylpyrazoles in moderate to good yields.</p>

Este trabalho descreve nossos resultados para a reação entre benzenosselenol, gerado in situ pela reação entre disseleneto de difenila com H3PO2, com uma série de (E)-chalconas utilizando glicerol como solvente. Utilizando as condições de reação otimizadas, uma variedade de produtos de redução 1,4-quimiosseletivas podem ser obtidos em bons rendimentos. A mistura glicerol/H3PO2 pode ser facilmente recuperada e reutilizada em condições de reação de redução 1,4-quimiosseletivas por ciclos sucessivos sem perda de eficiência. Adicionalmente, sob condições de reação de redução 1,4-quimiosseletivas, o produto natural zingerona pode ser sintetizada em bom rendimento.

We describe herein our results for the reaction of benzeneselenol, generated in situ by reaction of diphenyl diselenide with H3PO2, with various (E)-chalcones using glycerol as solvent. Using our optimized reaction conditions, a range of chemoselective 1,4-reduction products could be obtained in good yields. The glycerol/H3PO2 system can be easily recovered and reused in chemoselective 1,4-reductions for successive cycles without loss of efficiency. Additionally, under 1,4-reducing reaction conditions, the natural product zingerone can be synthesized in good yield.

Um método eficiente, limpo, quimiosseletivo e sem a utilização de solventes para a síntese de dimetil acetais de aldeídos e cetonas foi desenvolvido usando ortoformiato de trimetila e CeCl3 anidro como catalisador. O método é geral e, sob condições reacionais brandas, fornece compostos carbonílicos protegidos em bons rendimentos, incluindo aril e alquil cetonas e aldeídos. O catalisador pode ser reutilizado diretamente, três vezes, sem perda significativa da atividade.

An efficient, clean, chemoselective and solvent-free method for the synthesis of ketone and aldehyde dimethyl acetals was developed using trimethyl orthoformate and commercially available anhydrous CeCl3 as a recyclable catalyst. The method is general and affords the protected carbonyl compounds in good yields and under mild conditions, including aryl and alkyl ketones and activated aldehydes. The catalyst could be utilised directly for 3 cycles, without significant loss of activity.

Um método simples e eficiente foi desenvolvido para a hidrotiolação de fenilselenoalquinos utilizando KF/Al2O3 em meio livre de solvente. O método é geral e permite a preparação seletiva de (Z)-1-fenilseleno-2-organotio-1-alquenos a partir de tióis aromáticos e alifáticos em rendimentos de razoáveis a bons. A presença do grupamento organosselênio direcionou a regioquímica da adição do tiol. O sistema catalítico pode ser reutilizado mais quatro vezes sem tratamento prévio

We present herein the results of a simple and efficient protocol for the hydrothiolation of phenylselenoalkynes promoted by KF/Al2O3 using solvent-free conditions. This improved method furnishes selectively the corresponding (Z)-1-phenylseleno-2-organylthio-1-alkenes in reasonable to good yields starting from selenoalkynes and aliphatic or aromatic thiols. The presence of the phenylselenium group in the alkyne directed the regiochemistry of the thiol addition. The catalytic system can be reused up to 4 times without previous treatment.

Um método simples e geral foi desenvolvido para a síntese de selenetos e teluretos vinílicos a partir de alquinos terminais e dicalcogenetos de diorganoíla usando NaBH4 e [bmim]BF4 como solvente reciclável. Este método eficiente permite a formação preferencial de calcogenetos vinílicos de configuração Z na maioria dos exemplos estudados. Também foi observado que na reação envolvendo fenilacetileno, (E)-bis-fenilcalcogenoestirenos foram obtidos com bons rendimentos e alta seletividade. O líquido iônico foi reutilizado três vezes sem perda da eficiência.

A general and simple method for the synthesis of vinyl selenides and tellurides starting from terminal alkynes and diorganyl chalcogenides using NaBH4 and [bmim]BF4 as a recyclable solvent was developed. This efficient and improved method furnishes the corresponding vinyl chalcogenides preferentially with Z configuration. We also observed that when the same protocol was applied to phenyl acetylene, (E)-bis-phenylchalcogeno styrenes were obtained in good yields and high selectivity. The ionic liquid was reused up three times without lost of efficiency.

Um método simples e eficiente foi desenvolvido para a adição conjugada de tióis ao citral na presença de KF/Al2O3 em meio livre de solvente ou usando glicerina como solvente reciclável a temperatura ambiente. O método em meio livre de solvente foi aplicado com sucesso na reação direta do tiofenol com o óleo essencial de capim limão (Cymbopogon citratus), para fornecer diretamente 3,7-dimetil-3-(feniltio)oct-6-enal, um potencial agente bactericida. O método foi estendido a outros alcenos deficientes de elétrons com excelentes resultados. Para o método em meio livre de solvente, o uso de irradiação com microondas facilitou o procedimento e acelerou a reação. O sistema catalítico e a glicerina podem ser reutilizados até três vezes sem tratamento prévio, com atividade comparável.

A general, clean and easy method for the conjugated addition of thiols to citral promoted by KF/Al2O3 under solvent-free or using glycerin as recyclable solvent at room temperature is described. It was found that the solvent-free protocol is applicable to the direct reaction of thiophenol with the essential oil of lemon grass (Cymbopogon citratus) to afford directly 3,7-dimethyl-3-(phenylthio)oct-6-enal, a potential bactericide agent. The method was extended to other electron-poor alkenes with excellent results. For the solvent-free protocol, the use of microwave irradiation facilitated the procedure and accelerates the reaction. The catalytic system and glycerin can be reused up to three times without previous treatment with comparable activity.

Um método simples e eficiente foi desenvolvido para a hidrocalcogenação de alquinos contendo um aceptor de Michael (éster, cetona e nitrila) com ânions fenilcalcogenolatos gerados in situ a partir do respectivo dicalcogeneto de difenila (Se, Te, S), usando hidreto de boro e sódio suportado em alumina e meio livre de solvente. Este método é geral e permite a obtenção de ésteres, cetonas e nitrilas (Z)-beta-fenilcalcogeno-<FONT FACE=Symbol>a,b</FONT>-insaturados, com rendimentos e seletividade comparados aos obtidos quando se utiliza solvente orgânico e atmosfera inerte. O uso de irradiação de microondas facilitou o procedimento e acelerou a reação.

A simple, clean and efficient solvent-free protocol was developed for hydrochalcogenation of alkynes containing a Michael acceptor (ester, ketone and nitrile) with phenylchalcogenolate anions generated in situ from the respective diphenyl dichalcogenide (Se, Te, S), using alumina supported sodium borohydride. This efficient and improved method is general and furnishes the respective (Z)-beta-phenylchalcogeno-<FONT FACE=Symbol>a,b</FONT>-unsaturated esters, ketones and nitriles, in good yield and higher selectivity, compared with those that use organic solvent and inert atmosphere. The use of microwave (MW) irradiation facilitates the procedure and accelerates the reaction.

Foi desenvolvido um método simples e eficiente para a síntese de beta-estirenos alfa-fenilseleno-substituídos, através da reação do alfa-(fenilselenobenzil)fosfonato de dietila e NaH na presença de aldeídos. A reação destes produtos com n-BuLi e posterior captura do ânion com aldeídos ou DMF levou à formação, exclusivamente, de álcoois de configuração Z e aldeídos <FONT FACE=Symbol>a,b</FONT>-insaturados de configuração E, respectivamente. Além disto, a hidrólise dos selenetos na presença de TiCl4 levou à formação de alfa-arilacetofenonas em bons rendimentos.

A new and efficient method was developed to prepare alpha-phenylseleno-beta-substituted styrenes by reaction of diethyl alpha-phenylseleno benzylphosphonate with NaH and aldehydes. Selenium-lithium exchange by reaction with n-BuLi yielded the vinyl lithium species, which were captured with several electrophiles, like aldehydes and DMF, affording exclusively (Z)-allyl alcohols, and (E)-alpha-phenyl-alpha-beta-unsaturated aldehydes, respectively in good yields. The hydrolysis of the vinyl selenides in presence of TiCl4 allowed the corresponding alpha-aryl acetophenones.

Um método simples e eficiente foi desenvolvido para a síntese de alfa-fenilselenoacrilonitrilas e ésteres alfa-fenilseleno-alfa,beta-insaturados através, respectivamente, da reação one-pot de aldeídos com fenilselenoacetonitrila ou acetato de (fenilseleno)etila na presença de um catalisador em suporte sólido (KF/Al2O3), sem o uso de solvente.

A simple, clean and efficient method has been developed for the synthesis of alpha-phenylselenoacrylonitriles and alpha-phenylseleno-alpha,beta-unsaturated esters by a one-pot reaction of aldehydes with phenylselenoacetonitrile or ethyl(phenylseleno)acetate respectively, in the presence of a solid supported catalyst (KF/Al2O3), without any solvent.