ABSTRACT The welding of dissimilar steels such as duplex and superaustenitic stainless steels is often used in industrial applications. The effect of welding energy on the heat-affected zone (ZTA) and fusion zone (ZF) presents knowledge gaps to be researched in relation to the metallurgical and mechanical properties of these steels. Variations in the application of welding energy can favor the presence of a greater volume of the ferritic or austenitic phases, and in more critical cases, cause the formation of precipitates harmful to corrosion. This work aims to evaluate the metallurgical, mechanical properties and corrosion resistance of dissimilar welding composed of duplex stainless steel S32205, as base metal, and superaustenitic stainless steel as weld metal, verifying the effects on microstructural, sensitization and anisotropies with the application of different heat inputs. In the microstructural analysis, the formation of first phase constituents, such as grain boundary austenite (GBA), witmanstatten austenite (WA), intragranular austenite (IGA) and secondary austenite (γ2) was verified. The microhardness values found were higher than those reported in the literature. In the corrosion tests, in environments with oxidizing chlorides, the samples showed pitting corrosion, with a high loss of mass in the specimens being detected. It is concluded that in the ZTA the metallurgical characteristics were maintained after the variation of the thermal input and in the ZF there was an increase in the loss of mass in the corrosion test in the analyzed samples. applications heataffected affected (ZTA (ZF phases cases S32205 S metal inputs analysis constituents GBA, GBA , (GBA) WA, WA (WA) IGA (IGA γ2 γ (γ2 verified literature tests chlorides detected S3220 (GBA (WA (γ S322 S32 S3
RESUMO A soldagem de aços dissimilares, como os aços inoxidáveis duplex e superausteníticos é muitas vezes utilizada em aplicações industriais. O efeito da energia de soldagem na zona termicamente afetada (ZTA) e zona de fusão (ZF) apresenta lacunas de conhecimento a serem pesquisadas em relação às propriedades metalúrgicas e mecânicas destes aços. Variações na aplicação da energia da soldagem podem favorecer a presença de maior volume das fases ferrítica ou austenítica, e em casos mais críticos, ocasionar a formação de precipitados deletérios à resistência a corrosão. Este trabalho tem o objetivo avaliar as propriedades metalúrgicas, mecânicas e a resistência à corrosão da soldagem dissimilar composta de aço inoxidável duplex S32205, como metal de base, e aço inoxidável superaustenítico como metal de solda. Verificou-se os efeitos na microestrutura, sensitização e anisotropias com aplicação de diferentes aportes térmicos. Na análise microestrutural foi verificado a formação de constituintes de primeira fase, como a austenita de contorno de grãos (GBA), austenita de witmanstatten (WA), austenita intragranular (IGA) e austenita secundária (γ2). Os valores de microdureza encontrados foram superiores aos referenciados na literatura. Nos ensaios de corrosão, em ambientes com cloretos oxidantes, as amostras apresentaram corrosão por pitting, sendo detectada elevada perda de massa nos corpos de prova. Conclui-se que na ZTA as características metalúrgicas se mantiveram após a variação do aporte térmico e na ZF houve incremento da perda de massa no ensaio de corrosão nas amostras analisadas. dissimilares industriais (ZTA (ZF austenítica críticos S32205 S base solda Verificouse Verificou microestrutura térmicos fase GBA, GBA , (GBA) WA, WA (WA) IGA (IGA γ2. γ2 γ . (γ2) literatura oxidantes pitting prova Concluise Conclui analisadas S3220 (GBA (WA (γ2 S322 (γ S32 S3