Abstract This study showcases the clinical efficacy of mucoadhesive patches designed for the buccal delivery of lidocaine and prilocaine hydrochlorides (1:1, 30 mg/patch). Such patches were developed for needle-free pre-operative local anesthesia in dentistry, aiming at mitigating the use of infiltrative anesthesia for medium-complexity clinical procedures. The patches were manufactured encompassing drug-release, mucoadhesive and backing layers, all prepared through film casting using biocompatible materials. Fifty-eight (n = 58) adult patients (65% women and 35% men) were randomly selected and included in a one-arm open clinical prospective cohort study. The average age of the subjects was of 50 years. The majority (59%) of the subjects, mostly women (82%), reported needle-phobia or anxiety due to dental procedures, which was assessed through a questionnaire approved by the ethical council for human use in research. The patches were positioned in the gingival region of the teeth involved in the procedure (86% on the maxillary and 14% on the mandibular bone). Two anesthetic patches were applied on each patient: one in the vestibular region and another in the palate/lingual portion, and these patches remained attached to the placement sites throughout the procedures. Concerning the dental procedures performed, 40% were cavity preparations and dental restorations of medium cavities; 29% staple facilities; 10% gingival retractions; 9% subgingival scrapings; 3% gingivalplasties; 3% supragingival preparations; 3% occlusal adjustments; and 2% subgingival preparations. In 90% of the cases, it was not necessary to complement with conventional infiltrative local anesthesia during the procedures. Patients did not report any discomfort or side effect during or after the administration of the patches. Among the cases in which there was the need for complementation, 50% were cavity preparations and dental restorations; 33% supragingival preparations; and 17% gingivoplasties. The complementary anesthesia volume was of 0.63 ± 0.23 mL and women corresponded to 83% of the participants who needed such intervention. Furthermore, in most cases, the patch was capable of initiating the anesthesia within a short time frame (5 minutes) and reaching the maximum anesthetic effect within 15 and 25 min, lasting at least 50 min. Undesirable side effects were not reported either 2 h after the administration or within the 6-month follow-up. Therefore, the anesthetic patches developed provide needle-free, painless, safe, and patient/dentist-friendly advances in performing routine medium-complexity dental procedures.

Resumo Este estudo avaliou a influência de um preparo retentivo em forma de ombro para prevenir a falha precoce de núcleos de preenchimento realizados em molares com 3 diferentes tipos de resina composta. Noventa e seis terceiros molares superiores hígidos extraídos de humanos, foram divididos em dois grupos (n=48) de acordo com o tipo de redução oclusal: em todas as cúspides (total) ou nas cúspides vestibulares (parcial). Os grupos foram divididos em dois subgrupos: núcleos retidos a pinos e não retidos a pinos, resultando em quatro grupos (n=24): redução oclusal total/retido a pino, redução oclusal parcial/retido a pino, redução oclusal total/não retido a pino, redução oclusal parcial/não retido a pino. A redução oclusal foi de 3 mm com um ombro retentivo semilunar de 3 mm e uma altura de parede axial de 1,5 mm. Os grupos foram restaurados utilizando resina composta microhíbrida, fluível ou reforçada com titânio. Foram confeccionadas coroas provisórias de resina acrílica autopolimerizável modificada, cimentadas com cimento provisório sem eugenol e termocicladas. Uma máquina universal de ensaios foi utilizada para tracionar as coroas provisórias paralelamente ao longo eixo do dente até o seu deslocamento. Análise de variância de 3 fatores foi aplicada para avaliar o efeito dos fatores na retenção do núcleo. Noventa e três núcleos de preenchimento permaneceram retidos sob a carga de tração, enquanto três núcleos de preenchimento sem pinos foram deslocados. A análise de variância não mostrou diferença significante entre os núcleos de preenchimento com desenho retentivo e os núcleos de preenchimento retidos a pinos. Com o advento dos sistemas adesivos, o aumento da área de superfície e o desenho retentivo dos ombros podem fornecer um preparo retentivo para evitar falhas precoces nos núcleos de preenchimento durante a fabricação de restaurações indiretas, o que contribuirá para a longevidade das restaurações finais.

Abstract This study evaluated the influence of a retentive shoulder design to prevent early failure of three resin composite build-ups on molars. Ninety-six intact extracted human maxillary third molars were assigned to two groups (n=48) based on occlusal, buccal cusps only and all cusps reduction. The groups were divided into two subgroups: pin retained and non-pin retained build-ups resulting in four groups (n=24), according the cusps reduction: pin retained/partial, pin retained/complete, non-pin retained/partial, non-pin retained/complete. Occlusal reduction was 3 mm with a semi-lunar retentive shoulder of 3 mm and an axial wall height of 1.5 mm. Groups were restored using a microhybrid, flowable or titanium reinforced resin composite. Modified self-curing acrylic resin provisional crowns were fabricated, cemented with non-eugenol temporary cement and thermal cycled. An instron machine applied tension to the provisional crowns parallel to the long axis of the tooth until dislodgement. A three-way analysis of variance was conducted on the influence of the variables on the retention of the core build-up. Ninety-three build-ups were retained under tensile load, while three core build-ups without pins were dislodged. Three-way analysis of variance showed no statistically significant difference between core build-ups using a retentive shoulder and pin retained core build-ups when tested under tensile load. With the advent of adhesive systems, increased surface area and retentive shoulder design can provide a retentive core foundation to prevent early failures of core build-ups during indirect restoration fabrication which will contribute to the longevity of final restorations.

Este estudo foi realizado para verificar se resinas compostas podem ser clareadas com uso do dióxido de cloro, em comparação com peróxido de hidrogênio. Foram preparados discos com resina restauradora Filtek Z350 3M ESPE (n=40), com dimensões 5 mm de diâmetro × 2 mm de espessura. Os discos foram divididos em 4 grupos de 10 discos cada. A avaliação da cor foi realizada por meio do CIEDE2000. Os discos foram manchados com soluções de café, chá, vinho e água destilada (controle) por 5 h diárias durante 14 dias. A avaliação da cor foi repetida nos discos manchados e seguida por clareamento de 5 discos de cada grupo, utilizando dióxido de cloro ou peróxido de hidrogênio pela técnica de consultório. Finalmente, uma última avaliação da cor foi realizada e as técnicas comparadas estatisticamente. DE2000 após o clareamento foi muito próxima ao baseline, para ambos os agentes clareadores, embora o dióxido de cloro tenha mostrado melhores resultados do que o peróxido de hidrogênio. Após o manchamento, houve uma descoloração clinicamente significativa (ΔE2000≥3,43) para os grupos de chá, café e vinho, sendo que o clareamento (ΔE2000) foi melhor obtido com o grupo do vinho, em comparação com chá e café. No geral, o grupo controle (água destilada) teve a menor mudança de cor nos três intervalos. Após o clareamento, a cor em todos os espécimes voltou próxima ao baseline. As diferenças de cor entre o clareamento e o baseline foram inferiores a 3,43 para todos os grupos. Os resultados indicam que o dióxido de cloro é ligeiramente superior ao peróxido de hidrogênio no clareamento de resinas compostas, mantendo a cor próxima à escala do baseline.

This study was carried out to verify if composites could be bleached using chlorine dioxide as compared with hydrogen peroxide. 3M ESPE Filtek Z350 Universal Restorative discs were prepared (n=40), with dimensions 5 mm diameter x 2 mm thickness. The discs were divided into 4 groups of 10 discs each. Color assessment was performed by CIEDE2000. The discs were stained with coffee, tea, wine and distilled water (control) solutions for 14 days, 5 hours daily. Color assessment was repeated on stained discs and followed by bleaching of 5 discs from each group using chlorine dioxide and hydrogen peroxide in-office systems. Finally, a last color assessment was performed and compared statistically. DE2000 after bleaching was very close to baseline for both the bleaching agents, although chlorine dioxide showed better results than hydrogen peroxide. After staining, there was a clinically significant discoloration (∆E2000≥3.43) for the tea, coffee and wine groups, and discoloration (∆E2000) was seen more in the wine group as compared to tea and coffee. Overall, the control group (distilled water) had the least color change in the three intervals. After bleaching, the color in all specimens returned close to the baseline. The color differences between bleaching and baseline were less than 3.43 for all groups. The obtained results show that chlorine dioxide is slightly superior to hydrogen peroxide in the bleaching of composites, while maintaining the shade of the composite close to the baseline.

Properly performed daily mechanical biofilm control is the most important prevention strategy for periodontal diseases. However, proper mechanical biofilm control is not performed effectively by the majority of the population, mainly due to lack of motivation and of manual dexterity. Local biofilm retention factors may aggravate home oral hygiene quality. For this reason, patients wearing fixed orthodontic appliances comprise a group that may benefit from the daily use of mouthwashes. The purpose of this review was to perform a systematic search in the literature on antiseptics used to control supragingival biofilm and gingivitis in orthodontic patients. Six studies investigating the effect of chlorhexidine and 5 studies evaluating the effect of the daily use of antiseptics were found. Chlorhexidine showed better results in reducing plaque and gingivitis. However, because of its adverse effects after continuous use, it should not be indicated for long-term periods. Among the agents considered for daily use, the fixed combination of essential oils was the only one evaluated in a clinical trial, in which a comparative group presented a statistically significant clinical impact. There is no direct evidence supporting the indication of antiseptic agents for orthodontic patients other than chlorhexidine and essential oils. It can be concluded that, for patients undergoing orthodontic treatment, chlorhexidine should be considered for treating acute gingival inflammation, whereas essential oils should be indicated for long-term daily use in controlling supragingival biofilm.

Different reasons can contribute to classifying dental prosthesis wearers as high-risk individuals in relation to dental biofilm accumulation. These include a past history of oral disease, age and additional retentive areas. Other common complaints include inflammation and halitosis. Moreover, prosthesis replacement and prosthetic pillar loss are generally associated with caries and periodontal disease recurrence. Therefore, the present study undertook to make a critical review of the literature, aiming at discussing the main aspects related to chemical agent prescriptions for dental prosthesis wearers. Most of the articles were selected based on relevance, methods and availability in regard to the specific subject under investigation, without considering publication year limitations. Different types of prostheses and their impact on teeth and other oral tissues were reported. It was demonstrated that there is greater biofilm buildup and increased inflammatory levels in the presence of different types of prostheses, suggesting that additional measures are required both on population-wide and individual levels in order to control these factors. Mechanical control consists of a combination of manual or electric toothbrush and toothpaste, as well as specific devices for interdental cleaning. Although many chemical agents exhibit antimicrobial benefits when used for prosthesis disinfection, only a few agents can be used safely without causing damage. Regarding the selection of antiseptics by the overall population, chlorhexidine is the most indicated in the short term and in sporadic cases. The most indicated adjuncts to overcome the deficiencies and limitations of daily mechanical biofilm control are products containing essential oils as active ingredients.

Great possibilities for oral rehabilitation emerged as a result of scientific consolidation, as well as a large number of dental implant applications. Along with implants appeared diseases such as mucositis and peri-implantitis, requiring management through several strategies applied at different stages. Biofilm accumulation is associated with clinical signs manifest by both tooth and implant inflammation. With this in mind, regular and complete biofilm elimination becomes essential for disease prevention and host protection. Chemical control of biofilms, as an adjuvant to mechanical oral hygiene, is fully justified by its simplicity and efficacy proven by studies based on clinical evidence. The purpose of this review was to present a consensus regarding the importance of antimicrobial mouthrinse use as an auxiliary method in chemical peri-implant biofilm control. The active ingredients of the several available mouthrinses include bis-biguanide, essential oils, phenols, quaternary ammonium compounds, oxygenating compounds, chlorine derivatives, plant extracts, fluorides, antibiotics and antimicrobial agent combinations. It was concluded that there is strong clinical evidence that at least two mouthrinses have scientifically proven efficacy against different oral biofilms, i.e., chlorhexidine digluconate and essential oils; however, 0.12% chlorhexidine digluconate presents a number of unwanted side effects and should be prescribed with caution. Chemical agents seem beneficial in controlling peri-implant inflammation, although they require further investigation. We recommend a scientifically proven antiseptic, with significant short and long term efficacy and with no unwanted side effects, for the prevention and/or treatment of peri-implant disease.

Teeth rehabilitation that present great scuffs by attrition, erosion or abfraction, has as a main purpose to restore the function and aesthetic compromised. In some cases previous surgical periodontal treatments is required to respect the biological width and subsequently, the rehabilitation in perfect harmony of affected teeth. The present report has the objective to show the technique and recovering of a case with severe scuffs in lower anterior teeth, which was subjected to a surgical periodontal treatment by osteotomy to restore lost vertical dimension through temporary restorations.

La rehabilitación de dientes que presentan grandes desgastes por atrición, erosión o abfracción tiene como objetivo devolver la función y la estética comprometida. En muchos casos es necesario realizar tratamientos periodontales quirúrgicos previos para respetar el espacio biológico y así rehabilitar, posteriormente, en perfecta armonía los dientes afectados. Este reporte muestra la técnica y recuperación de un caso con desgastes severos en los dientes anteroinferiores, el cual se tuvo que someter a un tratamiento periodontal quirúrgico mediante osteotomía para recuperar la dimensión vertical perdida a través de restauraciones provisorias.

The extent of separation between the maxillary and mandibular teeth in the fabrication of interocclusal splints designed to achieve efficiency and muscle relaxation is controversial and undefined in the literature. Based on this premise, the aim of this study was to evaluate the effect of interocclusal splint thicknesses of 3 and 6 millimeters on the electrical activity of the anterior temporal and masseter muscles during rest and dental clenching. Twenty asymptomatic individuals (10 males and 10 females) were selected using the Research Diagnostic Criteria (RDC). Electromyography (EMG) was performed both with and without the 3- and 6-mm splints using the Bio EMG software package, which recorded values given in microvolts (µV). The results, which were assessed using analysis of variance (ANOVA) to a 5% significance level (p < 0.05), showed increased electrical activity of the masticatory muscles during dental clenching compared with at rest, with greater activity in the masseter muscle. The electrical activity did not differ according to the thickness of the splints or between males and females. We can conclude that both splint thicknesses are effective in treating muscle hyperactivity given their similar clinical behavior for asymptomatic individuals.

The aim of this study was to present a possible carrier for MTA, monoolein gel, with the objective to maintain this material in the place that was inserted and verify if this procedure is able to optimize its action. The data were evaluated by histomorphometric method and submitted to statistical analysis. The histological responses observed in this study indicate that the MTA is a reliable material and should be considered effective in bone periapical defects and the monoolein gel was capable to maintain the MTA in situ

El objetivo de este estudio fue presentar el gel de monoleína como un posible cargador para el MTA y verificar si es capaz de optimizar su acción. Los datos obtenidos fueron evaluados por métodos histomorfométricos y sometidos a análisis estadístico. El resultado histológico reveló que el MTA es un material efectivo para utilizarlo en defectos óseos periapicales y que el gel de monoleína es capaz de mantener el MTA in situ