ABSTRACT. In no-till (NT), liming and urea fertilization are performed on the soil surface, which can increase nitrogen (N) losses via ammonia volatilization. On the basis of N fertilization management, gypsum application provides a promising alternative for improving N uptake by plants. Therefore, the objective of this study was to evaluate the N behavior loss by NH3-N volatilization, the soil pH at a depth of 0 - 0.05 m, leaf N content, and N uptake by second-season corn after lime and gypsum application in a Rhodic Ferralsol under NT. Overall, the treatments consisted of a 4 × 4 factorial arrangement with four lime rates (0, 2.6, 5.4, and 8.1 Mg ha-1) and four gypsum rates (0, 4, 8, and 12 Mg ha-1). During the study period, second-season corn was cultivated for two years and fertilized with urea, for which the N losses through ammonia volatilization, soil pH, leaf N content, and N uptake values were quantified. The losses through ammonia volatilization were subjected to nonlinear regression using a logistic model, and the other variables were subjected to linear regressions. The lime applied by broadcasting on the soil surface in the NT increased the pH of the topsoil and increased N losses via NH3-N volatilization in the second-season corn. Further, the N losses in the NT treated with lime accounted for 58% of the applied N, which increased by 2.3 to 2.5% for each Mg ha-1 of lime applied. Therefore, lime or gypsum application did not improve the status of N in second-season corn in soils with low acidity and no S deficiency.

ABSTRACT Oxisols ( Latossolos ) are widely distributed in tropical zones and generally characterized by high levels of surface and subsurface acidity. In Brazil, most Oxisols are managed under no-till conditions with surface application of acidity amendments. This study aimed to evaluate lime application strategies (incorporated and surface) for achieving the desired soil base saturation (BS%) levels (44, 60, 70, and 90 %) and the effect of phosphogypsum + lime application on soil chemical properties as well as wheat and corn yield in southern Brazil. Lime incorporation was more effective in reducing the soil acidity and increasing Ca2+ and Mg2+ despite a decrease in organic matter at the soil surface. Phosphogypsum application increased S-SO42- and Ca2+ availability throughout the deeper soil layers and reduced the Mg2+ content in the surface layer. Wheat yield under incorporated lime conditions increased with BS% up to 75, but there was no response to surface application. When phosphogypsum was applied, the wheat yield increased by 8.4 %. For corn, incorporated lime increased the yield up to 445 kg ha-1, which was equivalent to the yield after phosphogypsum application. An increase in the S-SO42- level was the main factor related to the increase in crop yields. In the short term, our results suggest that phosphogypsum applied along with lime is more appropriate than incorporating lime under no-till management conditions.

ABSTRACT The development of new fertilizer technologies to reduce nitrogen (N) losses from an agricultural system and to increase nitrogen use efficiency (NUE) is a global research objective. Controlled-release nitrogen fertilizers have shown great potential for reducing N losses and synchronizing N release according to crop demand, thereby improving the NUE. The objective of this study was to characterize controlled-release nitrogen fertilizers and compare them with conventional nitrogen sources in terms of N release, N loss via NH3 volatilization, and fertilizer effects on second-season corn. The field experiment was performed on an Ultisol in a randomized block design. The treatments consisted of two conventional nitrogen sources (urea and ammonium sulfate) and three brands of polymer-coated urea (PCU; Agrocote®, FortBlen®, and Kimcoat®). The variables N release and N loss by NH3 volatilization were subjected to nonlinear regression analysis using a logistic model and the Korsmeyer-Peppas model, respectively. Leaf N content and dry matter yield were subjected to the Tukey test, and the morphologies of the PCUs were observed by scanning electron microscopy (SEM). Electron micrographs revealed differences in the number of layers and the thickness of the coatings of the studied PCUs. FortBlen®, containing granules with single- or double-layer coatings with thicknesses ranging from 34.53 to 50.34 µm, promoted more gradual N release and reduced N-NH3 losses by 36.4 % compared with those observed with uncoated urea. Kimcoat® released approximately 98 % of the applied N within 24 hours, resulting in N-NH3 volatilization, and the responses in second-season corn were similar to those with uncoated urea. Although no benefits were observed in second-season corn for PCUs over uncoated nitrogen sources, some PCUs promoted more gradual N release and reduced N-NH3 volatilization, providing a promising alternative for environments prone to N loss.

Baixos teores de matéria orgânica no solo podem limitar o desenvolvimento da soja, devido a baixa disponibilidade de enxofre (S) no solo e pela alta demanda deste nutriente pelas plantas. Uma alternativa para complementar esta necessidade é a aplicação S foliar. O objetivo foi avaliar o efeito da aplicação de fertilizante foliar à base de enxofre na cultura da soja, em diferentes épocas e doses. Os tratamentos foram: (1) 0,0 kg ha-1 de S foliar; (2) 0,5 kg ha-1 de S foliar no estágio de início do florescimento (R1); (3) 0,5 kg ha-1 foliar no estágio de início do enchimento de grãos (R5.1); (4) 0,5 kg ha-1de S foliar nos estádios R1 e R5.1; (5) 1 kg ha-1de S foliar no estádio R1; (6) 1 kg ha-1de S foliar no estádio R5.1; (7) 1 kg ha-1de S foliar nos estádios R1 e R5.1, delineados em blocos ao acaso com 4 repetições. As variáveis respostas foram: massa de mil grãos, produtividade e teores de macro e micronutrientes nos grãos. A produtividade dos grãos aumentou 614 kg ha-1 com aplicação de S foliar em relação à testemunha. A dose que obteve a melhores resultados foi de 0,5 kg ha-1 aplicado nos estádios R3 ou R5.1. A utilização de enxofre elementar via foliar pode ser uma alternativa de complementação.

Low levels of organic matter in soil may limit the soybean crop development due to the low availability of sulfur (S) and the high demand of this nutrient by plants. The foliar fertilization is an alternative to supplement plant request. This study aimed at assessing the effect of applying foliar sulfur fertilizer in the soybean at different time and doses. The treatments studied were: (1) 0.0 kg ha-1 of S foliar; (2) 0.5 kg ha-1 of foliar S in beginning bloom (R1) stage; (3) 0.5 kg ha-1 of foliar at beginning seed (R5.1) stage; (4) 0.5 kg ha-1 of foliar S in R1 and R5.1; (5) 1 kg ha-1 of foliar S in R1; (6) 1 kg ha-1 of S foliar in R5.1; (7) 1 kg ha-1 of foliar S in R1 and R5.1 using randomized block design with 4 replicates. The variables analyzed were: one thousand grain mass, yield and the macro and micronutrient contents in the grains. The soybean yield increased 614 kg ha-1 with the application of foliar sulfur in relation to the control. The dose that obtained the best results was 0.5 kg ha-1 applied into the R3 or R5.1 stage. The use of elemental sulfur via foliar may be an alternative of sulfur supplementation.

ABSTRACT Brazilian soybean producers commonly apply maintenance potassium (K) fertilization during cultivation to restore the K taken up by plants; however, this measure can modify the morphophysiological plant characteristics, since the functions of K are closely related with plant growth and development. This study assessed the morphological changes in soybean plants in response to K rates, sowing fertilization, and the application periods of K fertilization in a Latossolo Vermelho eutroférrico (Oxisol) under a no-tillage system, located in the municipality of Floresta, Paraná. A randomized block design was used in the experiment with four replications in a fully crossed factorial design (5 × 2 × 2). The experiment was carried out in two growing seasons (2015/2016 and 2016/2017), with a total of 80 experimental units. The rates corresponded to the first factor (0, 40, 80, 120, and 160 kg ha-1 of K). The application periods (pre-sowing and post-sowing) were the second factor, and sowing fertilization (0 and 30 kg ha-1 of K) the third. The following variables were measured: shoot dry weight, leaf dry weight, stem dry weight, leaf area, specific leaf area, leaf area ratio, and leaf area index, and these biometric parameters were correlated with soybean yield. The results showed that plants well-supplied with K exploited the environment better and this may be reversed for higher yields since there were correlations between grain yield and the biometric parameters. At lower water availability, the biometric changes were more evident.

A produção intensiva de forrageiras para fenação aumenta os riscos de degradação física do solo e a escarificação, associada ou não com a adubação orgânica, pode ser alternativa para a recuperação estrutural desses solos. Assim, objetivou-se avaliar os efeitos da escarificação do solo, da adubação orgânica e adubação mineral, na densidade e porosidade do solo e na produtividade da Tifton 85. O experimento foi conduzido em uma área cultivada por dez anos para feno com Tifton 85. Apenas a escarificação promoveu alterações significativas nos atributos físicos do solo, principalmente na profundidade de 0,03-0,08m, mantendo-se por pelo menos nove meses. O curto período entre a escarificação e o primeiro corte para fenação prejudicou a produtividade da Tifton 85, porém não houve diferença na produtividade acumulada entre os manejos do solo ao fim de uma estação de crescimento da pastagem. A produtividade foi maior para os tratamentos com reaplicação de nitrogênio mineral em relação à testemunha, sendo que a produtividade com o uso de cama de aves foi inferior à adubação mineral no somatório dos quatro cortes da gramínea

The intensive forage production for hay increases the risk of soil physical degradation and soil chiseling, with or without organic and mineral fertilization, could be alternatives to soil structural recovery. The objective of this study was to evaluate the soil chiseling and poultry litter fertilization effects on soil bulk density and porosity and Tifton 85 production. The experiment was conducted in a soil with a ten years hay production with Tifton 85. Significant changes in soil physical properties occurred only with chiseling, especially at 0.03-0.08m depth, keeping for at least nine months. The short period between the first cut and chiseling harmed the Tifton 85 production, with no difference between the soil management in the end of Bermuda grass growing season. The productivity was higher in treatments with nitrogen reapplication. Tifton 85 with poultry litter produced less dry matter than with mineral fertilizer on tfhe sum of four cuts of Bermuda grass